PULSAR DOMES STEEL PIER

The PULSAR Pulley Accessory Kit is designed to aid the opening and closing of the dome shutter, and to minimise the risk of the shutter slipping and causing damage. Allows the shutter to be part opened to any position if required. Easy to fit, the kit comes complete with pulley wheel, nuts, bolts and washers, together with 4 metres of Nylon rope. It can be fitted whilst your dome is being installed or retro-fitted afterwards. The pulley fits to the flange at the top of your dome aperture, through the existing bolt hole, and the Nylon cord fits to the front and rear of the sliding shutter. Supplied with detailed fitting instructionsIMPORTANT NOTE: This set is already included in the current PULSAR domes and does not have to be ordered separately. Older Pulsar domes can be retrofitted at any time. FEATURES Makes opening and closing the dome shutter easier Minimises the risk of the shutter slipping and causing damage Allows the shutter to be part opened to any position SCOPE OF DELIVERY 1x PULSAR Pulley Kit

Our new PULSAR Induction Charger is a fantastic upgrade to the Pulsar Shutter Drive. Our drive features an internal Lithium Ion battery which is normally charged by a solar charger mounted to the outside of the observatory dome. Our new Induction charger is not only more efficient, but is also mounted inside the dome on the rotation drive housing. The charging and battery details are readily accessible through the rotation drive control box so you can monitor the status of your shutter battery. This is a great addition to your observatory, and one we are very proud of ! Please contact us if you wish to upgrade an exsisting Pulsar drive system as some modification may be required to your drive.

Adding one or more accessory bays will provide you with additional storage for your computer, books, etc. ​It is advisable to purchase these bays at the time of purchasing your observatory. This will save the extra delivery charge at a later date. The accessory bay comes with fixing kit and full installation instructions.  DIMENSIONS: 1050mm high x 680mm wide x 500mm deep , weight: 15 kgSCOPE OF DELIVERYBay (1 piece)

Adding one or more accessory bays will provide you with additional storage for your computer, books, etc. ​It is advisable to purchase these bays at the time of purchasing your observatory. This will save the extra delivery charge at a later date. The accessory bay comes with fixing kit and full installation instructions.  DIMENSIONS: 1050mm high x 680mm wide x 500mm deep.SCOPE OF DELIVERYBay (1 piece)

The Pulsar Observatory Dome provides a high quality, secure and practical housing for your telescope. Providing excellent weather protection for you and your telescope, it allows you to have your instrument ready for use at all times. Whether imaging or visual, having the convenience of a permanent set up adds greatly to your enjoyment of exploring the night sky. Ideal for up to at least 16" (40cm) aperture telescopes and a variety of installations, also ideal for societies, schools, etc. The Pulsar Observatory dome is sectional in design, and is delivered in kit form. Alternatively, we can provide a complete installation service for you. Please Ring for details. The Pulsar Observatories 2.7 metre full height dome benefits from many advanced features.FEATURES Finest quality, weather proof GRP finishHigh quality locking system Simple design for self assembly Motorised dome rotation available Motorised dome shutters available Accessory storage bays availableAvailable in white (other colours - please call)Dimensions: Total Height approx 2.7 metres Dome Diameter approx 2.7 metres Door Height approx 1.1 metres Dome Aperture approx 0.7 metres CUSTOMER REQUIREMENTS: Before you place the order of any Observatory Dome system please make sure that your department of planning and building inspection does agree. Probably you need a certain building permission.The customer will need to provide a level concrete base to ensure secure fixing and dome operation. Have a look to our installation guide which gives you an example for a suitable base dimension. Various upgrades and accessories are available. The 2.7 metre Observatory Dome is available in white - for other colours please call. We can also supply a steel pier, that will complete the permanent installation of your telescope, giving you more space within the dome than your existing tripod. We can also fabricate custom height piers to suit your requirements. VIDEO:  https://www.pulsarastro.com/video-guides-27-w.aspFAQ:  https://www.pulsarastro.com/faqs-28-w.aspCustomer review: Philippe R. (France):2 years ago, I purchased from you a 2.7 m dome fully motorized settled in my backyard in the region of X. You shall be happy to know that I am very satisfied with this product which is reliable for operating in a remote control mode . The dome hosts a Ritchey Chretien Telescope or alternatively an refractor astrograph used mainly for deep sky imaging I let you inform Pulsar Dome https://www.astrobin.com/search/?q=cpafobinIMPORTANT NOTES:THIS PRODUCT CAN`T BE ORDERED ONLINE BUT BY PHONE CALL OR E-MAIL.  AFTER PLACING THE ORDER YOU WILL RECEIVE A SEPARATE SALES CONTRACT FROM BRESSER.THERE WILL BE A DELIVERY CHARGE FOR THE OBSERVATORY, PRICE ACCORDING TO LOCATION - PLEASE E-MAIL US OR RING FOR DETAILS. AVAILABLE FROM STOCK IN GERMANY OR FOR CUSTOMIZED PRODUCTS THE DELIVERY TIME IS: 6-8 WEEKS APPROX. Save cash money ! PULSAR domes are transported safely on oversized, individually manufactured pallets with special dimensions, which quickly make transport by freight forwarder expensive. Therefore, it would be possible for all customers to pick up their own PULSAR dome with their own transporter or trailer from BRESSER GmbH Rhede/Westphalia, GERMANY, by arrangement.

The Pulsar Observatory Dome provides a high quality, secure and practical housing for your telescope. Providing excellent weather protection for you and your telescope, it allows you to have your instrument ready for use at all times. Whether imaging or visual, having the convenience of a permanent set up adds greatly to your enjoyment of exploring the night sky. Ideal for at least 16" (40cm) aperture telescopes and a variety of installations, also ideal for societies, schools, etc. The Pulsar Observatory dome is sectional in design, and is delivered in kit form. Alternatively, we can provide a complete installation service for you. Please Ring for details. The Pulsar Observatories 2.7 metre short height dome benefits from many advanced features.FEATURES Finest quality, weather proof GRP finishHigh quality locking system Simple design for self assembly Motorised dome rotation available Motorised dome shutters available Accessory storage bays availableAvailable in white (other colours - please call)Dimensions: Total Height approx 1.7 metres Dome Diameter approx 2.7 metresWall height 0.25 metres  Dome Aperture approx 0.7 metres CUSTOMER REQUIREMENTS: Before you place the order of any Observatory Dome system please make sure that your department of planning and building inspection does agree. Probably you need a certain building permission.The customer will need to provide a level concrete base to ensure secure fixing and dome operation. Have a look to our installation guide which gives you an example for a suitable base dimension. Various upgrades and accessories are available. The 2.7 metre Observatory Dome is available in white - for other colours please call. We can also supply a steel pier, that will complete the permanent installation of your telescope, giving you more space within the dome than your existing tripod. We can also fabricate custom height piers to suit your requirements. Customer review: Philippe R. (France):2 years ago, I purchased from you a 2.7 m dome fully motorized settled in my backyard in the region of X. You shall be happy to know that I am very satisfied with this product which is reliable for operating in a remote control mode . The dome hosts a Ritchey Chretien Telescope or alternatively an refractor astrograph used mainly for deep sky imaging I let you inform Pulsar Dome https://www.astrobin.com/search/?q=cpafobinVIDEO:  https://www.pulsarastro.com/video-guides-27-w.aspFAQ:  https://www.pulsarastro.com/faqs-28-w.aspIMPORTANT NOTES:THIS PRODUCT CAN`T BE ORDERED ONLINE BUT BY PHONE CALL OR E-MAIL.  AFTER PLACING THE ORDER YOU WILL RECEIVE A SEPARATE SALES CONTRACT FROM BRESSER.THERE WILL BE A DELIVERY CHARGE FOR THE OBSERVATORY, PRICE ACCORDING TO LOCATION - PLEASE E-MAIL US OR RING FOR DETAILS. AVAILABLE FROM STOCK IN GERMANY OR FOR CUSTOMIZED PRODUCTS THE DELIVERY TIME IS: 6-8 WEEKS APPROX. Save cash money ! PULSAR domes are transported safely on oversized, individually manufactured pallets with special dimensions, which quickly make transport by freight forwarder expensive. Therefore, it would be possible for all customers to pick up their own PULSAR dome with their own transporter or trailer from BRESSER GmbH Rhede/Westphalia, GERMANY, by arrangement.

The Pulsar Observatory Dome provides a high quality, secure and practical housing for your telescope. Providing excellent weather protection for you and your telescope, it allows you to have your instrument ready for use at all times. Whether imaging or visual, having the convenience of a permanent set up adds greatly to your enjoyment of exploring the night sky. Ideal for up to 12" (30cm) aperture telescopes and a variety of installations, also ideal for societies, schools, etc. The Pulsar Observatory dome is sectional in design, and is delivered in kit form. Alternatively, we can provide a complete installation service for you. Please Ring for details. The Pulsar Observatories 2.2 metre full height dome benefits from many advanced features.FEATURES Finest quality, weather proof GRP finishHigh quality locking system Simple design for self assembly Motorised dome rotation available Motorised dome shutters available Accessory storage bays availableAvailable in white (other colours - please call)Dimensions: Total Height approx 2.47 metres Dome Diameter approx 2.2 metres Door Height approx 1.1 metres Dome Aperture approx 0.6 metres CUSTOMER REQUIREMENTS: Before you place the order of any Observatory Dome system please make sure that your department of planning and building inspection does agree. Probably you need a certain building permission.The customer will need to provide a level concrete base to ensure secure fixing and dome operation. Have a look to our installation guide which gives you an example for a suitable base dimension. Various upgrades and accessories are available. The 2.2 metre Observatory Dome is available in white - for other colours please call. We can also supply a steel pier, that will complete the permanent installation of your telescope, giving you more space within the dome than your existing tripod. We can also fabricate custom height piers to suit your requirements. VIDEO:  https://www.pulsarastro.com/video-guides-27-w.aspFAQ:  https://www.pulsarastro.com/faqs-28-w.aspIMPORTANT NOTES:THIS PRODUCT CAN`T BE ORDERED ONLINE BUT BY PHONE CALL OR E-MAIL.  AFTER PLACING THE ORDER YOU WILL RECEIVE A SEPARATE SALES CONTRACT FROM BRESSER.THERE WILL BE A DELIVERY CHARGE FOR THE OBSERVATORY, PRICE ACCORDING TO LOCATION - PLEASE E-MAIL US OR RING FOR DETAILS. AVAILABLE FROM STOCK IN GERMANY OR FOR CUSTOMIZED PRODUCTS THE DELIVERY TIME IS: 6-8 WEEKS APPROX. Save cash money ! PULSAR domes are transported safely on oversized, individually manufactured pallets with special dimensions, which quickly make transport by freight forwarder expensive. Therefore, it would be possible for all customers to pick up their own PULSAR dome with their own transporter or trailer from BRESSER GmbH Rhede/Westphalia, GERMANY, by arrangement.

The PULSAR Dome Drive is the latest development in automating your observatory. Designed for use with the Pulsar 2.7 metre dome or 2.2 metre dome, you can control your observatory from the LCD display panel or from the supplied software on your PC. The Pulsar Dome Drive system is supplied completely assembled, ready to install, using just 4 bolts. The maximum rotation speed is approx. 2.5 degrees per minute.The LCD display panel will control the following functions:Move left and rightStopAngle displayGo to angleTracking speed displayChange sidereal speedOpen and close shutter (if shutter drive connected)HomeParkChange brightnessBattery level and charging status of shutter (if shutter drive connected)The supplied PULSAR Observatories Software package allows full control of the observatory from a computer, and includes an ASCOM driver for use with third party software, i.e. Maxim DL, to allow full synchronisation with your telescope. The Pulsar software will control the following functions:Move left and rightStopAngle displayGo to angleSidereal speed displayChange home angleChange park angleShutter statusSCOPE OF DELIVERYDome controllerEncoder unitPower supplyHardware (fixing kit, etc)Software (WINDOWS)

Pulsars new Heavy Duty security clamps are ideal for automated and remote observatory domes. Made from high quality stainless steel, they remain permanently engaged whilst still allowing free rotation of the dome top. We advise the use of these clamps for not only remote use, but also public observatories and schools. They can easily be fitted to exisiting pulsar domes too ! Our HD clamps are supplied in pairs.

Motorize your dome shutter - with Bluetooth connection to the rotational drive, and is a vital step towards complete full remote operation of your observatory. Designed to use with PULSAR 2.7 metre dome or 2.2 metre dome. The PULSAR shutter drive is powererd by a pre-installed lithium battery. The battery is recharged by the supplied new PULSAR Induction Charger or by using a power tank battery charger. The charging and battery details are readily accessible through the rotation drive control box so you can monitor the status of your shutter battery. The shutter drive is permanently powered on and the shutter can be opened or closed using a single red button on the drive housing.Alternatively the shutter can ve opened or closed using the software, by Bluetooth connection with the PULSAR rotation drive.SCOPE OF DELIVERYShutter controllerMotor driveConnecting cablesLithium BatteryInduction chargerHardware kit

The Pulsar Observatory Dome provides a high quality, secure and practical housing for your telescope. Providing excellent weather protection for you and your telescope, it allows you to have your instrument ready for use at all times. Whether imaging or visual, having the convenience of a permanent set up adds greatly to your enjoyment of exploring the night sky. Ideal for up to 12" (30cm) aperture telescopes and a variety of installations, also ideal for societies, schools, etc. The Pulsar Observatory dome is sectional in design, and is delivered in kit form. Alternatively, we can provide a complete installation service for you. Please Ring for details. The Pulsar Observatories 2.2 metre short height dome benefits from many advanced features.FEATURES Finest quality, weather proof GRP finishHigh quality locking system Simple design for self assembly Motorised dome rotation available Motorised dome shutters available Accessory storage bays availableAvailable in white (other colours - please call)Dimensions: Total Height approx 1.4 metres Dome Diameter approx 2.2 metresWall height 0.25 metres  Dome Aperture approx 0.6 metres CUSTOMER REQUIREMENTS: Before you place the order of any Observatory Dome system please make sure that your department of planning and building inspection does agree. Probably you need a certain building permission.The customer will need to provide a level concrete base to ensure secure fixing and dome operation. Have a look to our installation guide which gives you an example for a suitable base dimension. Various upgrades and accessories are available. The 2.2 metre Observatory Dome is available in white - for other colours please call. We can also supply a steel pier, that will complete the permanent installation of your telescope, giving you more space within the dome than your existing tripod. We can also fabricate custom height piers to suit your requirements. VIDEO:  https://www.pulsarastro.com/video-guides-27-w.aspFAQ:  https://www.pulsarastro.com/faqs-28-w.aspIMPORTANT NOTES:THIS PRODUCT CAN`T BE ORDERED ONLINE BUT BY PHONE CALL OR E-MAIL.  AFTER PLACING THE ORDER YOU WILL RECEIVE A SEPARATE SALES CONTRACT FROM BRESSER.THERE WILL BE A DELIVERY CHARGE FOR THE OBSERVATORY, PRICE ACCORDING TO LOCATION - PLEASE E-MAIL US OR RING FOR DETAILS. AVAILABLE FROM STOCK IN GERMANY OR FOR CUSTOMIZED PRODUCTS THE DELIVERY TIME IS: 6-8 WEEKS APPROX.Save cash money ! PULSAR domes are transported safely on oversized, individually manufactured pallets with special dimensions, which quickly make transport by freight forwarder expensive. Therefore, it would be possible for all customers to pick up their own PULSAR dome with their own transporter or trailer from BRESSER GmbH Rhede/Westphalia, GERMANY, by arrangement.

The Pulsar multi pier adapter plate is a universal solution for mounting your equatorial mount on the PULSAR telescope pier (part.No.4900660). This adapter plate has different contours on the top and bottom which are suitable for most commercially available telescope mounts. Depending on the type of mount, it can be easily reversed and the pier is ready for use with another mount. You stay flexible and don't have to work with different adapters when upgrading or changing your telescope mount. The adapter plates we offer are made of solid aluminium material and use, among other openings, the standard hole circle diameter of 130mm with 6pcs through holes of 8.0mm and countersinks for M8 cylinder head screws with hexagon socket. The outer diameter of the adapter plate is 163mm and the overall height is 50mm. This adapter plate is suitable for the following telescope mounts: BRESSER/EXPLORE SCIENTIFIC: EXOS-II and EXOS-II Goto, MON-2, EXOS-II PMC-Eight VIXEN: GP, GPDX , etc. SKYWATCHER: EQ3-2Pro, EQ5Pro, HEQ5Pro, AzEQ5GT, NEQ6, AzEQ6GT, EQ6R Pro CELESTRON: CG-5, AVX, CGem, CGem, CGemDX, CGX, CGX-L, CGE, CGE Pro Adapter plates for many other mountings on request and available at short notice. Ask us by e-mail at info@bresser.de or give us a call.