LUNT LS6CaKMDd2 Ca-K filter in 90° star diagonal

Transforms normal refractor telescopes up to 540mm focal length into Ca-K solar telescopes. No further accessories required.

  • Solar observation in Ca-K wavelength
  • For refractors up to 100mm aperture & up to 540mm focal length
  • Bandwidth <2.4 Angstrom
  • Shows super granulation, flares & much more
  • Calcium-K filter module in 90° zenith-mirror
  • For use at 2 inch focusers
  • No additional accessories required
  • Absolutely safe, no danger to the eyes

€1,899.00*

Currently not available

Enter your email in the field below and we will notify you when the product is back in stock.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
By submitting the form, I accept the general terms and conditions as well as the privacy policy.
Product number: 0553501
GTIN/EAN: 4007922035208
Product information "LUNT LS6CaKMDd2 Ca-K filter in 90° star diagonal"
Calcium-K module in star diagonal, for using normal astronomical telescopes up to 100mm aperture and up to 540mm focal length as Ca-K solar telescopes.

This Calcium-K module transforms your normal astronomical refractor telescope into a Ca-K solar telescope. It will be very easy: Put the Ca-K module into the 2" focuser of your telescope, and you are ready for solar observing in the light of the Calcium-K wavelength.

Internal narrowband filters allow for a <2.4 Angstrom bandwidth. For refractor telescopes up to 100mm aperture and up to 540mm focal length. For imaging it will be better to use a bigger Ca-K module.
The Ca-K module is in a 90° star diagonal, for 2" focuser on the telescope side, and with T2 thread and 1.25" eyepiece connection on the eyepiece side.

All needed filter parts are integrated inside the compact module. There are no additional filters needed.

The Ca-K wavelength is at the edge of the visible light spectrum for human eyes, so for many people visual observing is difficult. However, all details could be captured photographically. Therefore the Ca-K Module is optimized primarily for imaging.

FEATURES
  • Bandwidth <2.4 Angstrom
  • Usable at telescopes up to 100mm aperture and 540mm focal
  • 90° star-diagonal housing
  • 2" slide tube for 2" focuser
  • Connection for 1.25" eyepieces
  • T2 thread for camera connection
SCOPE OF DELIVERY
  • Ca-K module in 90° star diagonal for 2" focuser
  • Integrated blocking filter B600 for telescopes up to 540mm focal length
  • Instruction manual

Colour: white
Material: Aluminium

Zubehör

LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm

€299.00*
LUNT HAT solar hat with neck flap
Keep your head covered and prevent sunburn while observing. UV protectant material with small pocket and clip to prevent being blown off in the wind. Cool ventilated design. Neck flap to keep your neck protected while looking through the eyepiece.SCOPE OF DELIVERYSolar Hat with neck flap

€59.00*
%
EXPLORE SCIENTIFIC ED APO 80mm f/6 FCD-1 Alu 2" R&P Focuser
The three-lens design of the EXPLORE SCIENTIFIC ED-Apochromats provides everything an amateur astronomer desires - at a reasonable price. The construction with Hoya FCD-1 ED glass has two air spaces and provides a level of correction so superior to the two-lens constructions, that are common in this price class, that you will see the difference immediately. This excellent optical performance teams up with a high precision mechanics - the result is a telescope on a level that is setting a new standard in it´s price class. Astrophotographers will love this telescope - a optional field flattner is available and makes the telescope perfect even for cameras with a large chip format.These very popular EXPLORE SCIENTIFIC Triplet ED APO Refractors we do offer in 3 different product lines:Essential Line: HOYA FCD-1 Glass lens, AL-Tube, 2.0" Rack&Pinion Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112084(AL), 0112106(AL), 0112132(AL)), 0112155(CF + 3"FT)) Professional Line: HOYA FCD-100 Glas lens, AL/CF-Tube, 2.5" HEXAFOC Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112086(AL), 0112108(AL), 0112109(CF), 0112134(AL), 0112135(CF))High-End Line: OHARA FPL-53 Glass lens, Carbon(CF) Tube, 3.0" Feather-Touch Focusser with 1:10, 2.0" Star Diagonal 99% Reflectivity (see Part No. 0112165(CF))FEATURESthree lens air-spaced ED-apochromatHoya FCD01-ED glasspolystrehl of above 0.9weight: 2,6kgbackfocus: 165mm above 2" adaptorSCOPE OF DELIVERYOptics with dovetail plate and finder slot 2" Star Diagonal 99% reflectivityDust caps for front-lens and focuser

€594.00* €799.00* (25.66% saved)
Adapter T2 to 2", for 2" eyepieces to blocking filter
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)

€29.00*

Suggested products

LUNT Solar Eclipse Glasses (5 pieces)
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sunvery resistant to damage100% safeSCOPE OF DELIVERYSolar eclipse glasses (5 pieces)

€23.80*
LUNT Solar Eclipse Glasses (1 piece)
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters. FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sun very resistant to damage 100% safe SCOPE OF DELIVERYSolar eclipse glasses (1 piece)

€12.80*
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm

€299.00*
EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 150-160mm Newtonians
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 127mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 127mmFits to outer telescope tube diameter from 150 to 280mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

€44.90*
LUNT Mini SUNoculars
​Small 6x30 binoculars for solar observing in White-Light.This truly pocket sized binoculars with 6x magnification are only for solar observing. You can view and safely study large Sun-spots, transits and solar eclipses. The Sun's image shows in a pleasing  orange colour, rather in a harsh blue-white, as it does in some other white light filters.Lunt Mini SUNoculars have White-Light filter film installed inside the binoculars. This makes solar observation 100% safe. The light of the sun is reduced to a comfortable 0.00001% transmission and all ultra-violet and infrared components are completely and safely blocked.Lunt SUNoculars are manufactured to the same standards of safety typical to the entire family of Lunt Solar products - the premier manufacturer of Solar telescopes and filters.FEATURESMagnification: 6xObjective lens diameter: 30mmEye relief: 9mmTransmission: 0.00001% (OD5)Filter type: Solar film, CE certifiedLength: 105mmWidth: 110mmWeight: 160gSCOPE OF DELIVERYMini SUNoculars in blister packStrap

€34.90*
EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 80-102mm Telescopes
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 90mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 90mmFits to outer telescope tube diameter from 90 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

€29.90*
LUNT LS60FHa/B600d2 H-alpha solar filter
60mm H-alpha solar filter system with B600 blocking filter, for front mounting at telescopes with 2" focuser, and up to 540mm focal length.The LS60FHa H-alpha Etalon filter system with 60mm aperture (no central obstruction) for use on any refractor and many other telescopes. Because the LS60FHa has an estimated bandwidth of <0.75 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B600 blocking filter, which is usable for telescopes up to 540mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 2" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom.FEATURESAperture: 60 mmNo central obstructionBandwidth: <0.75 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 85 mmWeight: 0.85 kgFront thread: M90x1 female threadRear thread: M90x1 male threadBlocking filter: B600 in diagonal for 2" focuserMaximum focal length of telescope: 540 mmSCOPE OF DELIVERYLS60FHa solar filterB600 Blocking Filter (for 2" focuser) in star-diagonalTransport caseInstruction manual

€3,799.00*
LUNT LS150PS Dovetail Bar 150mm (GP level)
This dovetail plate with 150mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.FEATURESLength: 150mmWidth: 44mmDistance between screws: 35mmScrews thread: 1/4"-20SCOPE OF DELIVERY1 x 150mm dovetail plate2 x 1/4"-20 screws

€85.00*
LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes
​Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa

€11.90*
LUNT Ca-K filter-module for LS130MT
This Ca-K module can be used at the LS130MT/B1200 and LS130MT/B1800 telescopes to observe the Sun also in the Calcium-K line. At the LS130MT/B3400 additionally the conversion kit for the LS130MT is required (item number 0551696).You can use this Ca-K module with your LS130MT telescope to observe and photograph the Sun not only in H-alpha, but also in the blue calcium-K wavelength. Here again completely different phenomena become visible on the Sun than in H-alpha.This Ca-K module was specially designed for the LS130MT H-Alpha telescope. If the H-alpha Etalon unit is removed from the LS130MT, the Ca-K module is simply inserted into the focuser instead of the blocking-filter.The additional conversion kit 0551696 is necessary at the LS130MT/B3400, because at this telescope the blocking filter is fix installed inside the focuser.For human eyes, the calcium-K light is just at the limit of the visible range. Many people have problems with visual observation. However, this does not apply to photography, where the Ca-K module shows everything the Sun has to offer in this wavelength.SCOPE OF DELIVERY2'' Ca-K Module for LS130MT telescopeInstruction manualLS130MT telescope and conversion kit not included! Can only be used together with an LS130MT solar telescope, at LS130MT/B3400 additional conversion kit 0551696 necessary.This Ca-K module is also available for the LS130MT/B3400 as a set together with the required conversion kit (item number 0551695).

€2,699.00*
LUNT HRG/SFPT anti-reflection filter for DSII/SFPT double-stack at LS80MT & LS100MT telescopes
The anti-reflection filter is an accessory for the DSII/SFPT double-stack module for the Lunt Solar Systems LS80MT and LS100MT telescopes. Reflections that may occur there can be effectively reduced with this anti-reflection filter if necessary.At the LS80MT and LS100MT multipurpose telescopes from Lunt Solar Systems, double-stacking is possible in H-alpha mode for solar observation with the internal DSII/SFPT double-stack modules (item number 0551395). The DSII modules reduce the bandwidth to <0.5 Angstroms. The DSII modules are designed to show better the surface details of the Sun, the contrast is significantly increased, and therefore filaments and active areas are better visible.But the DSII modules can also induce reflections, which can show up as a strong brightening around the sun. This so-called ''glow'' is not a problem when observing the solar surface. But it can complicate the observation of prominences, and many observers find it disturbing. The HRG/SFPT anti-reflection filter is designed to solve this problem. The filter effectively reduces the reflections. But please also note that the image will become darker by using this anti-reflective filter.The HRG/SFPT anti-reflection filter is easy to install. It is not necessary to return the telescope to the manufacturer, the filter can be easily installed by the user.This filter cannot be used separately! It can only be used on a Lunt Solar Systems LS80MT or LS100MT telescope together with a DSII/SFPT Double-Stack module.SCOPE OF DELIVERYHRG/SFPT anti-reflection filterInstruction manual

€349.00*
LUNT DSII/SFPT double-stack module for LS80MT & LS100MT
Double-stack module for more contrast and details on the solar surface with the LS80MT and LS100MT telescopes.At the LS80MT and LS100MT telescopes double-stacking is possible with this internal DSII double-stack module when observing the sun in H-Alpha. The DSII modules reduce the bandwidth to <0.5 Angstrom. They are designed to show the surface details of the sun better, the contrast is significantly increased and therefore filaments and active regions are better visible.The DSII/SFPT module is designed exclusively for use in LS80MT and LS100MT telescopes, it cannot be used at other telescopes. It is used between the existing H-Alpha unit and the focuser on the telescope. Installation is simple, no additional adapters or tools are required.FEATURESBandwidth: <0.5 AngstromTuning: Air Pressure Tuning System SCOPE OF DELIVERYDSII module with internal Etalon for LS80MT and LS100MT telescopesPressure Tuner System(LS80MT or LS100MT telescope not included!)

€3,199.00*

Customers also viewed

EXPLORE SCIENTIFIC Ultra Light 20'' Dobson 500mm f/3.6 GENERATION II
Ultra Light Dobsonian 500mm GENERATION II - telescope mechanics handcrafted in HUNGARY and GERMANY No telescope type has influenced amateur astronomy as radically as the dobsonian telescope. Before the introduction of this telescope type by John Dobson the vast majority of amateur telescopes were small inadequate refractors on shaky mounts - just good enough to show the polar regions on mars or the rings of Saturn. Bigger telescopes, like the Schmidt-Cassegrain telescopes, were restricted to the relatively small group of amateurs that could afford them.The brilliant combination of simple - but effective - mechanics and the largest aperture available led to a worldwide triumph of this concept. No other telescope type offers you so much light for your money as a good dobson. We have taken the motto held together by gravity and driven by yoghurt power and offer a modern version of the classic - designed by amateur astronomers for amateur astronomers. Despite its large aperture the telescope can be transported easily even in small cars and is assembled within minutes without tools. The construction was optimized for maximum rigidity with a minimum of mass. The combination of big altitude wheels and a optimized aluminium-sandwich construction allows for small movements even at high magnifications. The focus position is already positioned to accept our coma-corrector (part No. 0510330) . The ideal workhorse for the deep-sky enthusiast. A telescope with 500mm aperture gathers more than 5100-times more light than the naked eye. Details on planetary surfaces stand out even to unexperienced observers, and countless deep-sky objects show details and some color. Bright globular clusters are resolved down to the core and the view of the lunar terminator will provide a unforgettable experience. The fast 20’’ f3.6 main mirror as well as the large 120mm secondary mirror are made of high quality quartz material, so the cooling time is reduced to a minimum and the Dobson is quickly ready for use. Every main mirror is delivered with an individual optical test certificate, which guarantees the highest capacity. A laser engraved center mark of the main mirror allows easy adjustment. The optical surface has a high-quality aluminum silvering with 94% reflectivity and an extremely resistant quartz protection layer. The mirror overcomes frequently occurring dew fogging and cleanups without any damages and guarantees a long service life. A complete redesign of this Dobson was necessary to ensure the significantly increased requirements to stiffness and load bearing capacity of the optical components. All connections of the tube structure were made in the TIG welding process and no rivets and screws were used. This has made it possible for us to produce this 20’’ light weight Dobson so unbelievably stiff in spite of the low weight - a noticeably good quality which is searching for its match. The production of almost all mechanical components is carried out by our partners in Hungary and the final assembly of the optics and subsequent quality control takes place in Rhede, Germany. The equipment details of the smaller Dobson models, which have been popular for years, have been taken over and even extended considerably. First of all, of course, the very good decomposability and transportability should be mentioned. Set-up and dismantling can be carried out without tools. The main and secondary mirrors are adjustable during the observation and only two adjusting screws have to be moved. Thanks to the use of precision ball-heads in the main mirror cell and a precision hinge for secondary mirror suppport, the adjustment is absolutely easy and guarantees excellent stability. All connecting parts of the tube trusses now consist of CNC machined aluminum and are attached by stainless steel dowel screws. The secondary mirror can now also be adjusted by the adjusting screws in the direction of the optical axis. The tried and tested 2.5’’ HEXAFOC focuser with 1:10 fine adjustment has been used for years - this allows vignetting-free observation despite the fast aperture ratio. A second 40° displaced installed mounting plate with a viewfinder shoe allows the rotation of the tube top in combination with a favorable position of the viewfinder tube or the mounting of an additional TELRAD viewfinder. The 6 supporting feet underneath the rockerbox offer a perfect stability and guarantee a smooth tracking in azimuth. Four smaller fans are installed in the side of the mirror box as well as a large fan is installed under the main mirror. This allows an even quicker adaptation to the ambient temperature and reduces the tube seeing (boundary layer removal). The lateral altitude wheels can now be stowed comfortably in the foam layers of the mirror box. Last but not least another gimmick: The optical tube and the mirror cell are designed to use also on heavy equatorial mounts. Dimensions for mobile use: DIMS total: 680x680x1790mm; Rockerbox 678mmx678mmx347mm; Mirrorbox 590mmx590mmx361mm; Trusses approx. 1084mm; Truss diameter: 25mm; Eyepiece height while pointing at zenith approximately 1,63m; 20’’ Total net weight: 53 kg; 20’’ Mirror Box + Altitude wheels: 35,8kg; 20’’ Secondary Cage: 3,8kg; Rockerbox: 10,6 kg; 20’’ 4 Truss pairs: 2,8kg; 20’’ Primary mirror: 20kg SPECIFICATIONS Truss-Dobsonian telescope in full Aluminium construction Handcrafted in HUNGARY and GERMANY Fast 20’’ f3.6 optics with 1800mm focal length Large 120mm secondary mirror (short axis) Quarz primary- and secondary mirror set Laser engraved central mark on primary mirror Eyepiece height while pointing at zenith approximately 1,63m Full welded rigid telescope structure - no rivets and no screws Telescope tube and rockerbox powder-coated Collimation while observing with the delivered tooling DeLuxe 2,5’’ HEXAFOC focuser with 1:10 gear-reduction 8x50 finder scope with red illuminated reticle Slider bearings made from TEFLON und GRP for smooth and precise movement Improved primary mirror cell with completely redesigned mechanics High precision hinge system for secondary mirror holder Secondary mirror holder with adjustment mechnism along the optical axis 6 larger feet to improve stability Counter-weights (4 x 1.0 kg) included 2 universal finder slots to enable an easy finder position Quick-lock fasteners with new springloaded design for comfortable use Large powder-coated yellow altitude wheels for smooth tracking Altitude wheels can be stored in the mirror box 5 cooling fans are speeding up the cool-down time SCOPE OF DELIVERY Truss Dobsonian Telescope Individual optical test report for primary mirror 8x50 finder with red illuminated reticle Stray light shield for secondary cage Primary mirror collimation tool Battery compartment with bag for fans Extension tube for focuser Reducer 2’’/1.25’’ Manual SHIPPING DIMENSION - truck shipment only in order to guarantee a save transport: BOX1: 600x600x380 approx. 44 kg ; BOX2: 690x690x330 approx. 17 kg ; BOX3: 150x150x1150 approx. 4 kg

€7,999.00*