LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes

  • Spare part, not usable separately
  • Only for MT and THa telescopes from Lunt Solar Systems
  • There exist different sizes of the O-rings!
  • Please be sure to read the description of this spare part!

€5.00*

Available, delivery time: 1-3 days

Product number: 0558340
GTIN/EAN: 4007922072968
Product information "LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes"
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMS

Two rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.

Please be sure to note:
Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.
If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.
The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.

After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.

FEATURES
  • Inner diameter: 34mm
  • Outer diameter: 42mm
  • Cannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.
  • It does not matter what blocking-filter is at the MT or THa telescope.

SCOPE OF DELIVERY
  • Spare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems






Colour: black
Material: Rubber

Zubehör

LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€2.50*
LUNT O-ring 32mm for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€5.00*
LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes
​Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa

€5.00*

Suggested products

LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm

€299.00*
LUNT Sol Searcher
Sol-Searcher for installing on all solar telescopes of Lunt Solar Systems. The tube rings of the LUNT solar telescopes are prepared for the mounting of this Sol-Searcher."I can't find the Sun!" sounds funny. However, the Sun is tricky to find in a properly filtered telescope, and you don't ever want to chance a direct gaze, let alone a magnified image of it.This Sol-Searcher is the safe and easy way to find the Sun. It is absolutely safe since you don't look through Sol-Searcher, you look at it. The aperture acts as a "pinhole" which projects an image of the Sun on to the 1/4" translucent "screen." This screen can be viewed from either side. Simply move your scope until the Sun's image is centered on the screen and the Sun will be in the eyepiece's field of view.The solar telescopes from Lunt Solar Systems are fitted for installing this Sol-Searcher. Only at the LS130MT and LS152THa telescopes the additionally adapter 0554302 will be needed.SCOPE OF DELIVERYTeleVue Sol-SearcherScrewsHexagon wrench

€49.00*
LUNT B3400 Blocking-Filter in 2 inch extension tube
Blocking-filter in straight extension tube, for telescopes up to 3060mm focal length. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B3400 is installed in a straight extension tube, for 2 inch (50.8mm) focuser on the telescope side, and with 2 inch eyepiece connection and 1.25 inch (31.7mm) adapter on the eyepiece side. The B3400 can be used at LUNT H-alpha systems, if the used telescope has up to 3060mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 34mmUsable at telescopes up to 3060mm focalIn straight extension tubeFor 2 inch focuserConnection for 2 inch eyepiecesAdapter for 1.25 inch eyepiecesSCOPE OF DELIVERYBlocking-filter B3400 in 2 inch straight extension tubeAdapter for 1.25 inch eyepieces

€3,399.00*
LUNT B600d2 Blocking-Filter in 2 inch zenith mirror diagonal
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 540mm focal length, and with 2 inch (50.8mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B600d2 is installed in a 90° star-diagonal housing, for 2 inch (50.8mm) focuser on the telescope side, and with T2 thread and 1.25 inch (31.7mm) eyepiece connection on the eyepiece side. The B600d2 can be used at LUNT H-alpha systems, if the used telescope has a 2 inch focuser and up to 540mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 6mmUsable at telescopes up to 540mm focal90° star-diagonal housing2 inch slide tube for 2 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B600d2 in 90° star-diagonal for 2 inch focuser

€699.00*
LUNT LS150PS Dovetail Bar 150mm (GP level)
This dovetail plate with 150mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.FEATURESLength: 150mmWidth: 44mmDistance between screws: 35mmScrews thread: 1/4"-20SCOPE OF DELIVERY1 x 150mm dovetail plate2 x 1/4"-20 screws

€85.00*
LUNT B1200d1 Blocking-Filter in 1.25 inch zenith mirror diagonal
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 1080mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B1200d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B1200d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 1080mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 12mmUsable at telescopes up to 1080mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B1200d1 in 90° star-diagonal for 1.25 inch focuser

€1,299.00*
LUNT B1800d1 Blocking-Filter in 1.25 inch zenith mirror diagonal
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 1620mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B1800d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B1800d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 1620mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 18mmUsable at telescopes up to 1620mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B1800d1 in 90° star-diagonal for 1.25 inch focuser

€1,999.00*
LUNT B600d1 Blocking-Filter in 1.25 inch zenith mirror diagonal
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 540mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B600d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B600d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 540mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 6mmUsable at telescopes up to 540mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B600d1 in 90° star-diagonal for 1.25 inch focuser

€699.00*
LUNT Adapter-Plate LS100FHa for up to 120mm Ø
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with up to 120mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with up to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557442 gives only the price for a complete range of different adapter-plates up to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

€129.00*
LUNT Adapter-Plate LS50/60FHa to 101 - 120mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 101mm to 120mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 101mm to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557412 gives only the price for a complete range of different adapter-plates of 101mm to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

€136.00*
LUNT Adapter-Plate LS100FHa to 226 - 250mm Ø
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 226mm to 250mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 226mm to 250mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557448 gives only the price for a complete range of different adapter-plates of 226mm to 250mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

€379.00*
LUNT Adapter-Plate LS50/60FHa for up to 80mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with up to 80mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with up to 80mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557410 gives only the price for a complete range of different adapter-plates up to 80mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

€98.00*

Customers also viewed

LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€2.50*