LUNT LS2HW 50.8mm (2'') Herschel-wedge
Shows on normal refractor telescopes up to 150mm aperture sunspots and granulation in highest quality with perfect eye protection
- Solar observation in White-Light for perfectionists
- For lens telescopes up to 150mm aperture
- Shows sunspots and granulation at best contrast
- In 90° angle housing like a zenith-mirror
- Necessary ND3.0 filter is already fix installed
- No escaping stray light due to integrated light trap
- Absolutely safe, no danger for the eyes
Product number:
0558201
GTIN/EAN:
4007922035277
Product information "LUNT LS2HW 50.8mm (2'') Herschel-wedge"
Herschel-wedge / Solar-wedge for superior White-Light solar observing and imaging. For refractor-telescopes up to 150mm aperture, and with 2'' focuser. Complete system with installed ND3.0 filter.
Herschel-Wedges will be used to observe the sun in White-Light. Around 95 % of the sun light will be suppressed by the Herschel Wedge. The remaining sun light will be dimmed by a fix installed ND3.0 grey filter. Lunt Solar Systems Herschel-wedges are installed in a fully closed housing with integrated heat trap. There is no stray light escaping, therefore it is very safe.
The difference between Herschel-wedges and normal front mounted filters is, that the filtering takes place just before the eyepiece or camera. This will provide a better contrast and sharpness of the solar image.
Furthermore, there is more safety at a Herschel-wedge than at a front mounted filter. A Herschel-wedge can not rip or become holes like a foil. And also it can not drop down from the telescope objective accidentally.
Only for use with refractor telescopes up to 150mm aperture:
Because the full energy and heat of the sun will be inside the telescope, we advise to use only refractors with a Herschel-wedge. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflector telescopes, become very hot by the concentrated solar energy and could be damaged.
Tuning the brightness:
Because the Herschel-wedge produce polarized light, you can use a normal polarizing filter at the eyepiece or camera-adapter. By turning the polarizing filter the brightness will be reduced.
Polarizing filter not included. We recommend the BRESSER 2'' polarizing filter 4946465.
FEATURES
Herschel-Wedges will be used to observe the sun in White-Light. Around 95 % of the sun light will be suppressed by the Herschel Wedge. The remaining sun light will be dimmed by a fix installed ND3.0 grey filter. Lunt Solar Systems Herschel-wedges are installed in a fully closed housing with integrated heat trap. There is no stray light escaping, therefore it is very safe.
The difference between Herschel-wedges and normal front mounted filters is, that the filtering takes place just before the eyepiece or camera. This will provide a better contrast and sharpness of the solar image.
Furthermore, there is more safety at a Herschel-wedge than at a front mounted filter. A Herschel-wedge can not rip or become holes like a foil. And also it can not drop down from the telescope objective accidentally.
Only for use with refractor telescopes up to 150mm aperture:
Because the full energy and heat of the sun will be inside the telescope, we advise to use only refractors with a Herschel-wedge. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflector telescopes, become very hot by the concentrated solar energy and could be damaged.
Tuning the brightness:
Because the Herschel-wedge produce polarized light, you can use a normal polarizing filter at the eyepiece or camera-adapter. By turning the polarizing filter the brightness will be reduced.
Polarizing filter not included. We recommend the BRESSER 2'' polarizing filter 4946465.
FEATURES
- For refractor-telescopes up to 150mm aperture
- Connection to telescope: 2''
- Connection to eyepiece: 2''
- 90° housing like star-diagonal
- Especially high-quality optical surfaces for very good contrast
- Fully closed housing with integrated heat trap
- No stray light escaping - therefore it is very safe
- The needed ND3.0 filter is fix installed
- Herschel-wedge for 2'' focuser
- Integrated ND3.0 filter
- Hardcase
- Instruction manual
| Colour: | black |
|---|---|
| Material: | Aluminium |
Zubehör
%
BRESSER Single Polarizing Filter 2"
€49.50*
€55.00*
(10% saved)
Single linear 2" polarizing filter.This polarizing filter can be used for example at the Lunt Solar Systems 2" White-Light Herschel-wedge (0558201).The 2" filter can also be used with the BRESSER microscopes 5804000 and 5806100 for the suppression of reflections (eg on metal components, soldering points). It is connected via the M48 thread.FEATURESLinear polarizing filterFilter mount with 2" filter thread (M48)SCOPE OF DELIVERY1x 2" polarizing filter
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
€299.00*
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm
LUNT HAT solar hat with neck flap
€59.00*
Keep your head covered and prevent sunburn while observing. UV protectant material with small pocket and clip to prevent being blown off in the wind. Cool ventilated design. Neck flap to keep your neck protected while looking through the eyepiece.SCOPE OF DELIVERYSolar Hat with neck flap
BRESSER Messier AR-152L/1200 Hexafoc Optical Tube
€849.00*
NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.For the ambitious planetary observer the BRESSER Messier AR-152L is a dream machine. View tiny dots and structures in the cloud bands of Jupiter, small rims and craters on the surface of the moon and details on Mars, including the ice-covered polar regions of our neighbouring planet. Watch Jupiter's moons dance around the planet and detect the greenish glow of Uranus far beyond Saturns orbit. The combination of large aperture and long focal length provides tack-sharp high-contrast pictures that will impress you every time anew. This telescope is only an optical tube without mount and tripod.
CHARACTERISTICS
Optical design: refractor telescopeLens diameter: 152 mm / focal length: 1200 mm / F/7.9Maximum recommended magnification: 254xTelescope for night and solar observation
High-quality and light gathering achromatic objective lens
Modern multi-coating of the lenses for a bright and high-contrast image
Robust aluminium tube construction
Very high quality Hexafoc focuser with 2.5" free inner diameter
8x50 viewfinder with crosshair eyepiece
Optimised finder mount for comfortable viewing
31.7 mm (1.25") zenith mirror
Cradle rings with handle and integrated piggyback camera holder (1/4 thread)
Smartphone adapter for celestial navigation included
Prism rail with stainless steel clamping surface (44 mm universal dovetail for GP/EQ5/LXD75)
50.8 to 31.7mm adapter with integrated T2 adapter (optional T2 ring required)
SCOPE OF DELIEVRY
Optical tube
26 mm Super Plössl eyepiece 31,7 mm(1.25'')
31,7 mm (1.25") Zenith mirror,
Integrated 31,7 mm and T2 adapter
Prism rail with stainless steel clamping surface
Adapter for 50.8 mm (2") eyepieces
8x50 optical viewfinder
Rotatable star map
Aperture solar filter
Tube clamp with handle and camera holder
Smartphone adapter for celestial navigation
Astronomy PC software Stellarium (via download)
Similar products
LUNT Solar Eclipse Glasses (5 pieces)
€16.90*
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sunvery resistant to damage100% safeSCOPE OF DELIVERYSolar eclipse glasses (5 pieces)
LUNT Solar Eclipse Glasses (1 piece)
€5.90*
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.
FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sun very resistant to damage
100% safe SCOPE OF DELIVERYSolar eclipse glasses (1 piece)
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
€299.00*
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm
EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 150-160mm Newtonians
€44.90*
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 127mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 127mmFits to outer telescope tube diameter from 150 to 280mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter
LUNT Mini SUNoculars
€34.90*
Small 6x30 binoculars for solar observing in White-Light.This truly pocket sized binoculars with 6x magnification are only for solar observing. You can view and safely study large Sun-spots, transits and solar eclipses. The Sun's image shows in a pleasing orange colour, rather in a harsh blue-white, as it does in some other white light filters.Lunt Mini SUNoculars have White-Light filter film installed inside the binoculars. This makes solar observation 100% safe. The light of the sun is reduced to a comfortable 0.00001% transmission and all ultra-violet and infrared components are completely and safely blocked.Lunt SUNoculars are manufactured to the same standards of safety typical to the entire family of Lunt Solar products - the premier manufacturer of Solar telescopes and filters.FEATURESMagnification: 6xObjective lens diameter: 30mmEye relief: 9mmTransmission: 0.00001% (OD5)Filter type: Solar film, CE certifiedLength: 105mmWidth: 110mmWeight: 160gSCOPE OF DELIVERYMini SUNoculars in blister packStrap
EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 80-102mm Telescopes
€29.90*
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 90mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 90mmFits to outer telescope tube diameter from 90 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter
LUNT Adapter-Plate LS100FHa for up to 120mm Ø
€129.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with up to 120mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with up to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557442 gives only the price for a complete range of different adapter-plates up to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
LUNT 1.25" Slide-Tube for blocking filters
€48.00*
1.25" slide-tube, adapts Lunt Solar Systems 2" blocking-filter in star diagonal to telescopes with 1.25" focuser.FEATURESThread to blocking-filter: T2Length 1.25" slide-tube: 28mmSCOPE OF DELIVERYAdapter 2" LUNT Blocking Filter to 1.25" focuser(Blocking-filter not included)
LUNT LS60FHa/B1800d1 H-alpha solar filter
€4,537.39*
60mm H-alpha solar filter system with B1800 blocking filter, for front mounting at telescopes with 1.25" focuser, and up to 1620mm focal length.The LS60FHa H-alpha Etalon filter system with 60mm aperture (no central obstruction) for use on any refractor and many other telescopes. Because the LS60FHa has an estimated bandwidth of <0.75 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B1800 blocking filter, which is usable for telescopes up to 1620mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 1.25" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom.FEATURESAperture: 60 mmNo central obstructionBandwidth: <0.75 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 85 mmWeight: 0.85 kgFront thread: M90x1 female threadRear thread: M90x1 male threadBlocking filter: B1800 in diagonal for 1.25" focuserMaximum focal length of telescope: 1620 mmSCOPE OF DELIVERYLS60FHa solar filterB1800 Blocking Filter (for 1.25" focuser) in star-diagonalTransport caseInstruction manual
LUNT Adapter-Plate LS100FHa to 226 - 250mm Ø
€379.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 226mm to 250mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 226mm to 250mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557448 gives only the price for a complete range of different adapter-plates of 226mm to 250mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
LUNT LS100FHa/B600d1 H-alpha solar filter
€11,299.00*
100mm H-alpha solar filter system with B600 blocking filter, for front mounting at telescopes with 1.25" focuser, and up to 540mm focal length.The LS100FHa H-alpha Etalon filter system with 100mm aperture for use on any refractor and many other telescopes. Because the LS100FHa has an estimated bandwidth of <0.7 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B600 blocking filter, which is usable for telescopes up to 540mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 1.25" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.5 Angstrom.FEATURESAperture: 100 mmBandwidth: <0.7 AngstromTuning: tiltable EtalonHousing diameter: 162 mmLength: 101 mmWeight: 2.75 kgFront thread: M120x1.5 female threadRear thread: M120x1.5 male thread Blocking filter: B600 in diagonal for 1.25" focuserMaximum focal length of telescope: 540 mmSCOPE OF DELIVERYLS100FHa solar filterB600 Blocking Filter (for 1.25" focuser) in star-diagonalTransport caseInstruction manual
LUNT LS100FHa/B1200d2 H-alpha solar filter
€11,899.00*
100mm H-alpha solar filter system with B1200 blocking filter, for front mounting at telescopes with 2" focuser, and up to 1080mm focal length.The LS100FHa H-alpha Etalon filter system with 100mm aperture for use on any refractor and many other telescopes. Because the LS100FHa has an estimated bandwidth of <0.7 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B1200 blocking filter, which is usable for telescopes up to 1080mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 2" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.5 Angstrom.FEATURESAperture: 100 mmBandwidth: <0.7 AngstromTuning: tiltable EtalonHousing diameter: 162 mmLength: 101 mmWeight: 2.75 kgFront thread: M120x1.5 female threadRear thread: M120x1.5 male threadBlocking filter: B1200 in diagonal for 2" focuserMaximum focal length of telescope: 1080 mmSCOPE OF DELIVERYLS100FHa solar filterB1200 Blocking Filter (for 2" focuser) in star-diagonalTransport caseInstruction manual
Customers also viewed
LUNT LS1.25HW 31.7mm (1.25'') Herschel Wedge
€229.00*
This Herschel wedge is designed for superior White-Light solar observing and imaging. It can be used with refracting telescopes up to 102mm aperture, with 1.25'' focuser. This complete system comes with installed ND3.0 filter.Herschel Wedges are used to observe the sun in White Light. Around 95% of the Sun's light is suppressed by the wedge's ceramic prism. The remaining sun light is dimmed further by a factory-installed ND3.0 grey filter. Lunt Solar Systems Herschel wedges are installed in a fully closed housing with integrated heat trap. No stray light can escape from this, therefore it is very safe method of observing our nearest star.The difference between Herschel-wedges and normal front mounted filters is that the filtering takes place just before the eyepiece or camera. This provides better contrast and sharpness of the solar image - with more surface detail visible as a result. Furthermore, a Herschel wedge is inherently safer than at a front mounted filter. A Herschel wedge can not rip or become punctured like a foil filter can be and it cannot become detached from the telescope objective accidentally.Only for use with refractor telescopes up to 102mm aperture:Because the full energy and heat of the sun inside the telescope, we advise solely using refractors for Herschel-wedge use. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflecting telescopes, could suffer from thermal build-up by concentrated solar energy and could be permanently damaged.Tuning the brightness:Because the Herschel-wedge produces polarised light, you can use a normal polarising filter at the eyepiece, or camera-adapter. By turning the polarising filter the image brightness can be varied to the user's liking.This additional Polarising filter is not included. We recommend the BRESSER 1.25'' polarising filter, no: 4946464.FEATURESFor refractor telescopes up to 150mm apertureConnection to telescope: 1.25''Connection to eyepiece: 1.25''90° housing like star-diagonalEspecially high-quality optical surfaces for very good contrastFully closed housing with integrated heat trapNo stray light escaping - therefore it is very safeThe needed ND3.0 filter is fix installedWHAT'S INCLUDEDHerschel-wedge for 1.25'' focuserIntegrated ND3.0 filterTransport caseInstruction manual