LUNT B1800d1 Blocking-Filter in 1.25 inch zenith mirror diagonal

For free combination with a Lunt-Solar-Systems H-alpha solar-telescope or -filter

  • Blocking-filter in 90° zenith mirror
  • For combination with H-alpha telescopes or filters
  • For telescopes up to 1620mm focal length and 1.25 inch focuser
  • Eyepiece side with T2 thread and 1.25 inch eyepiece connection
  • Cannot be used stand-alone, only with H-Alpha systems!

€1,999.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Privacy
Product number: 0553006
GTIN/EAN: 4007922035802
Product information "LUNT B1800d1 Blocking-Filter in 1.25 inch zenith mirror diagonal"
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 1620mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!

Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.

The B1800d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B1800d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 1620mm focal length.

The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.
At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.

FEATURES
  • Blocking-filter only usable at additional H-alpha filter system
  • Filter diameter: 18mm
  • Usable at telescopes up to 1620mm focal
  • 90° star-diagonal housing
  • 1.25 inch slide tube for 1.25 inch focuser
  • Connection for 1.25 inch eyepieces
  • T2 thread for camera connection
SCOPE OF DELIVERY
  • Blocking-filter B1800d1 in 90° star-diagonal for 1.25 inch focuser

Colour: white
Material: Aluminium

Accessories

LUNT LS50FHa H-alpha double-stack solar filter
50mm H-alpha double-stack solar filter, for all LS50FHa filter-systems and LS60THa/LS60MT telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS50FHa filter-systems and LS60THa / LS60MT telescopes. Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom (dependent upon used telescope). So you will have much more contrast and more details on the sun will be visible.Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.75 Angstrom.FEATURESAperture: 50 mmNo central obstructionBandwidth double stacked: <0,55 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 73 mmWeight: 0.7 kgFront thread: M90x1 female threadRear thread: M90x1 male threadSCOPE OF DELIVERYLS50FHa solar filterTransport caseInstruction manual

€1,949.00*
LUNT LS60FHa H-alpha double-stack solar filter
60mm H-alpha double-stack solar filter, for all LS60FHa filter-systems and LS60THa/LS60MT telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS60FHa filter-systems and LS60THa / LS60MT telescopes. Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom (dependent upon used telescope). So you will have much more contrast and more details on the sun will be visible.Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.75 Angstrom.FEATURESAperture: 60 mmNo central obstructionBandwidth double stacked: <0,55 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 85 mmWeight: 0.85 kgFront thread: M90x1 female threadRear thread: M90x1 male threadSCOPE OF DELIVERYLS60FHa solar filterTransport caseInstruction manual

€2,999.00*
LUNT LS100FHa H-alpha double-stack solar filter
100mm H-alpha double-stack solar filter, for all LS100FHa filter-systems and LS100THa telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS100FHa filter-systems.Also the LS100THa H-alpha solar telescopes can be very easily double-stacked by using this 100mm double-stack filter. This combination offers high quality double-stacking to the observer.Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom. So you will have much more contrast and more details on the sun will be visible.Please note: The LS100FHa double-stack filter is only compatible with the old LS100THa H-alpha telescopes, but not with the new LS100MT multipurpose telescopes!Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.7 Angstrom.FEATURESAperture: 100 mmBandwidth double stacked: <0.55 AngstromTuning: tiltable EtalonHousing diameter: 162 mmLength: 101 mmWeight: 2.75 kgFront thread: M120x1.5 female threadRear thread: M120x1.5 male threadSCOPE OF DELIVERYLS100FHa solar filterTransport caseInstruction manual

€10,599.00*
LUNT LS50THa/B400PT H-alpha solar telescope
A very compact, complete telescope for observing the sun in H-alpha light.The LS50THa solar telescope offers 50 mm free aperture, 350 mm focal length, and provides a bandwidth of <0.75 Angstrom. The telescope is fitted as standard with the air-pressure tuning system "Pressure-Tuner", the Etalon is safely installed inside the telescope. Prominences and surface detail can quickly be viewed spontaneously. This very portable system is an ideal travel companion for wherever you go.A B400 blocking filter is installed inside the star diagonal. The B400 is good for visual observing. Focusing is achieved by a non-roting Helical focuser.Please note that there is only a small back-focus at this telescope, therefore solar-imaging is very difficult. The LS50THa is designed for visual solar observing. We recommend for imaging the 60mm telescopes of the LS60MT series.Also double-stacking with a bandwidth of only <0.5 Angstrom is possible by using the additional available LS50C filter (0550210). This filter threads directly onto the LS50THa telescope. Double-stacking will provide much more contrast, and more details on the sun will become visible.FEATURESAperture: 50  mmFocal Length: 350 mmBandwidth: <0.75 AngstromTuning: air-pressure tuning system "Pressure-Tuner"Blocking Filter: B400non-rotating Helical focuserTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Length: 37cmWeight: 2.1kgSCOPE OF DELIVERYLS50THa H-alpha Solar TelescopeB400 Blocking Filter in star-diagonalPressure-TunerTube ring with 1/4-20 connection for mounting on photo-tripodsnon-rotating Helical focuserInstruction manual

€1,499.00*
LUNT LS50THa/B600PT H-alpha solar telescope
A very compact, complete telescope for observing the sun in H-alpha light.The LS50THa solar telescope offers 50 mm free aperture, 350 mm focal length, and provides a bandwidth of <0.75 Angstrom. The telescope is fitted as standard with the air-pressure tuning system "Pressure-Tuner", the Etalon is safely installed inside the telescope. Prominences and surface detail can quickly be viewed spontaneously. This very portable system is an ideal travel companion for wherever you go.A B600 blocking filter is installed inside the star diagonal. The B600 offers a larger field of view than the smaller B400 and is very good for visual solar observing. Focusing is achieved by a non-roting Helical focuser.Please note that there is only a small back-focus at this telescope, therefore solar-imaging is very difficult. The LS50THa is designed for visual solar observing. We recommend for imaging the 60mm telescopes of the LS60MT series.Also double-stacking with a bandwidth of only <0.5 Angstrom is possible by using the additional available LS50C filter (0550210). This filter threads directly onto the LS50THa telescope. Double-stacking will provide much more contrast, and more details on the sun will become visible.FEATURESAperture: 50  mmFocal Length: 350 mmBandwidth: <0.75 AngstromTuning: air-pressure tuning system "Pressure-Tuner"Blocking Filter: B600non-rotating Helical focuserTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Length: 37cmWeight: 2.1kgSCOPE OF DELIVERYLS50THa H-alpha Solar TelescopeB600 Blocking Filter in star-diagonalPressure-TunerTube ring with 1/4-20 connection for mounting on photo-tripodsnon-rotating Helical focuserInstruction manual

€1,599.00*

Similar products

LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters
​Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters

€15.00*
LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes
​Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa

€5.00*
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€2.50*
LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€5.00*
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm

€299.00*
LUNT O-ring 32mm for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€5.00*
Adapter T2 to 2", for 2" eyepieces to blocking filter
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)

€29.00*
LUNT 2" Slide-Tube for blocking filters
2" slide-tube, adapts LUNT Solar Systems 1.25" blocking-filter in star diagonal to telescopes with 2" focuser.FEATURESThread to blocking-filter: T2Length 2" slide-tube: 80 mmSCOPE OF DELIVERYAdapter 1.25" LUNT Blocking Filter to 2" focuser(Blocking-filter not included)

€48.00*
LUNT Adapter-Plate LS100FHa to 201 - 225mm Ø
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 201mm to 225mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 201mm to 225mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557447 gives only the price for a complete range of different adapter-plates of 201mm to 225mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

€319.00*
LUNT Adapter-Plate LS100FHa for up to 120mm Ø
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with up to 120mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with up to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557442 gives only the price for a complete range of different adapter-plates up to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

€129.00*
LUNT B600d1 Blocking-Filter in 1.25 inch zenith mirror diagonal
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 540mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B600d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B600d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 540mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 6mmUsable at telescopes up to 540mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B600d1 in 90° star-diagonal for 1.25 inch focuser

€699.00*
LUNT B3400 Blocking-Filter in 2 inch extension tube
Blocking-filter in straight extension tube, for telescopes up to 3060mm focal length. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B3400 is installed in a straight extension tube, for 2 inch (50.8mm) focuser on the telescope side, and with 2 inch eyepiece connection and 1.25 inch (31.7mm) adapter on the eyepiece side. The B3400 can be used at LUNT H-alpha systems, if the used telescope has up to 3060mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 34mmUsable at telescopes up to 3060mm focalIn straight extension tubeFor 2 inch focuserConnection for 2 inch eyepiecesAdapter for 1.25 inch eyepiecesSCOPE OF DELIVERYBlocking-filter B3400 in 2 inch straight extension tubeAdapter for 1.25 inch eyepieces

€3,399.00*