LUNT B1200s Blocking-Filter in extension tube
For free combination with a Lunt-Solar-Systems H-alpha solar-telescope or -filter
- Blocking-filter in straight extension tube
- For combination with H-alpha telescopes or filters
- For telescopes up to 1080mm focal length & 1.25 or 2 inch focuser
- Eyepiece side with T2 thread and 1.25 inch eyepiece connection
- Cannot be used stand-alone, only with H-Alpha systems!
Product number:
0553009
GTIN/EAN:
4007922035833
WEEE-Reg.-Nr.:
DE 34716369
Product information "LUNT B1200s Blocking-Filter in extension tube"
Blocking-filter in straight extension tube, for telescopes up to 1080mm focal length. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!
Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.
The B1200s is installed in a straight extension tube, for 1.25 inch (31.7mm) and 2 inch (50.8mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B1200s can be used at LUNT H-alpha systems, if the used telescope has up to 1080mm focal length.
FEATURES
Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.
The B1200s is installed in a straight extension tube, for 1.25 inch (31.7mm) and 2 inch (50.8mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B1200s can be used at LUNT H-alpha systems, if the used telescope has up to 1080mm focal length.
The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.
At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.
FEATURES
- Blocking-filter only usable at additional H-alpha filter system
- Filter diameter: 12mm
- Usable at telescopes up to 1080mm focal
- In straight extension tube
- For 1.25 inch and 2 inch focuser
- Connection for 1.25 inch eyepieces
- T2 thread for camera connection
- Blocking-filter B1200s in straight extension tube
| Colour: | black |
|---|---|
| Material: | Aluminium |
Accessories
LUNT LS50FHa H-alpha double-stack solar filter
€1,949.00*
50mm H-alpha double-stack solar filter, for all LS50FHa filter-systems and LS60THa/LS60MT telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS50FHa filter-systems and LS60THa / LS60MT telescopes. Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom (dependent upon used telescope). So you will have much more contrast and more details on the sun will be visible.Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.75 Angstrom.FEATURESAperture: 50 mmNo central obstructionBandwidth double stacked: <0,55 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 73 mmWeight: 0.7 kgFront thread: M90x1 female threadRear thread: M90x1 male threadSCOPE OF DELIVERYLS50FHa solar filterTransport caseInstruction manual
LUNT LS60FHa H-alpha double-stack solar filter
€2,999.00*
60mm H-alpha double-stack solar filter, for all LS60FHa filter-systems and LS60THa/LS60MT telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS60FHa filter-systems and LS60THa / LS60MT telescopes. Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom (dependent upon used telescope). So you will have much more contrast and more details on the sun will be visible.Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.75 Angstrom.FEATURESAperture: 60 mmNo central obstructionBandwidth double stacked: <0,55 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 85 mmWeight: 0.85 kgFront thread: M90x1 female threadRear thread: M90x1 male threadSCOPE OF DELIVERYLS60FHa solar filterTransport caseInstruction manual
LUNT LS100FHa H-alpha double-stack solar filter
€10,599.00*
100mm H-alpha double-stack solar filter, for all LS100FHa filter-systems and LS100THa telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS100FHa filter-systems.Also the LS100THa H-alpha solar telescopes can be very easily double-stacked by using this 100mm double-stack filter. This combination offers high quality double-stacking to the observer.Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom. So you will have much more contrast and more details on the sun will be visible.Please note: The LS100FHa double-stack filter is only compatible with the old LS100THa H-alpha telescopes, but not with the new LS100MT multipurpose telescopes!Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.7 Angstrom.FEATURESAperture: 100 mmBandwidth double stacked: <0.55 AngstromTuning: tiltable EtalonHousing diameter: 162 mmLength: 101 mmWeight: 2.75 kgFront thread: M120x1.5 female threadRear thread: M120x1.5 male threadSCOPE OF DELIVERYLS100FHa solar filterTransport caseInstruction manual
LUNT LS60MT/R&P Multipurpose Telescope OTA without Blocking Filter
€2,899.00*
Modular designed multipurpose telescope, both for observing the sun
in the H-alpha wavelength, as well as for night sky observations. Easy
conversion between the different applications with a few simple steps.
Excellent image quality due to 2-lens ED optics with 70mm aperture for
night sky observation, and 60mm usable aperture for H-alpha solar
observation.With innovative air pressure tuning system
and high-quality 2 inch (50.8mm) Rack&Pinion (R&P) focuser. Delivered without blocking filter,
use for H-Alpha sun observation only possible with additional blocking
filter!This telescope is supplied without blocking filter. We
offer a wide range of additionally available blocking filters in
different sizes, either mounted in a 90° star-diagonal housing or in a
straight extension tube. These are all usable with this telescope.ATTENTION: Without such an additional blocking filter you cannot use this telescope for H-alpha solar observation!Solar observing in H-alpha:The LS60MT is a telescope for observing the sun in H-alpha light, with 60mm free aperture (no central obstruction) and 420mm focal length.
The H-alpha wavelength is the most impressive way to observe the sun,
showing protuberances at the sun's edge, filaments and flares on the
surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner.
Tuning is done by slightly changing the air pressure in a pressure
chamber inside the telescope. This changes the refractive index of the
air, making it easy to tune to the H-alpha line. The pressure tuner
guarantees a homogeneous image, without central obstruction, and a
permanently protected Etalon without erosion. A set of collimating
lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch Rack&Pinion focuser with 10:1 reduction.This version of the LS60MT is delivered without blocking filter.
Therefore an additional blocking filter is required to use the
telescope for solar observation in the H-alpha wavelength. You can
choose from the wide range of Lunt Solar Systems blocking filters and
decide for example if you want a blocking filter in a 90° star-diagonal
housing or one in a straight extension tube.Observing the starry night sky:The
H-alpha Etalon system can be removed from the telescope in a few easy
steps thanks to its modular design. The 2-lens ED refractor can then be
used as a normal telescope with 70mm aperture and 420mm focal length for observation and photography of the night sky. The ED Doublet lens will offer an excellent image. It can be used with a standard 2 inch zenith mirror at the R&P focuser.With an additional Amici prism, the telescope can of course also be used during the day for nature and landscape observations.This makes the LS60MT, with its small dimensions and low weight, also an ideal travel telescope for all applications!More applications:With additionally available accessories the LS60MT offers even more possibilities!- Double-StackThe LS60MT telescope can optionally be upgraded with the additionally available double-stack filters LS50FHa or LS60FHa
(part numbers 0550200 and 0550250). These filters will be simply
screwed on the front of the LS60MT, no additional adapters are
necessary. Thereby a bandwidth of <0.5 Angstrom is achieved for
H-alpha solar observation. Therefore much more details on the solar
surface will become visible.- Solar observing in White-LightIf
the H-alpha unit has been removed, of course either a sun filter to be
installed in front of the objective, or a Herschel-wedge at the focuser
can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly,
the Ca-K filter modules from Lunt Solar Systems can also be used at the
LS60MT to observe and photograph super-granulation and other effects
visible in this wavelength on the sun.This makes the LS60MT a completely universal usable telescope!FEATURES2-lens ED refractor, FPL-51Aperture: 70mmUsable aperture in H-alpha: 60mm (no central obstruction)Focal length: 420mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerSupplied without blocking filter, additionally available blocking filter absolutely necessary!Focuser: Rack&Pinion focuser with 10:1 reductionTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Weight with H-alpha unit: 3.8kgWeight without H-alpha unit: 2.6kgLength with H-alpha unit and blocking filter: 40cmLength without H-alpha unit: 31cmSCOPE OF DELIVERYLS60MT Multipurpose TelescopePressure-Tuner2 inch Rack&Pinion focuserTube ring with 1/4-20 connection for mounting on photo-tripodsTransport case (53x33x17cm)Instruction manual
LUNT LS80MT/R&P Multipurpose APO Telescope OTA without Blocking Filter
€6,359.00*
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system and good 2 inch (50.8mm) R&P focuser. Delivered without blocking filter, use for H-Alpha sun observation only possible with additional blocking filter!This telescope is supplied without blocking filter. We offer a wide range of additionally available blocking filters in different sizes, either mounted in a 90° star-diagonal housing or in a straight extension tube. These are all usable with this telescope.ATTENTION: Without such an additional blocking filter you cannot use this telescope for H-alpha solar observation!Solar observing in H-alpha:The LS80MT is a telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.This version of the LS80MT is delivered without blocking filter. Therefore an additional blocking filter is required to use the telescope for solar observation in the H-alpha wavelength. You can choose from the wide range of Lunt Solar Systems blocking filters and decide for example if you want a blocking filter in a 90° star-diagonal housing or one in a straight extension tube.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerSupplied without blocking filter, additionally available blocking filter absolutely necessary!Focuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-Tuner2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!
LUNT 2" Slide-Tube for blocking filters
€48.00*
2" slide-tube, adapts LUNT Solar Systems 1.25" blocking-filter in star diagonal to telescopes with 2" focuser.FEATURESThread to blocking-filter: T2Length 2" slide-tube: 80 mmSCOPE OF DELIVERYAdapter 1.25" LUNT Blocking Filter to 2" focuser(Blocking-filter not included)
Similar products
LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters
€15.00*
Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters
LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
€2.50*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
€299.00*
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm
LUNT LS300PS Dovetail Bar 300mm (GP level)
€113.00*
This dovetail plate with 300mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.Technical data:• Length: 300mm• Width: 44mm• Distance between screws: 35mm• Screws thread: 1/4"-20Delivered by order:• 1 x 300mm dovetail plate• 2 x 1/4"-20 screws
LUNT O-ring 32mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
Adapter T2 to 2", for 2" eyepieces to blocking filter
€29.00*
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)
LUNT Adapter-Plate LS100FHa for up to 120mm Ø
€129.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with up to 120mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with up to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557442 gives only the price for a complete range of different adapter-plates up to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
LUNT Adapter-Plate LS100FHa to 201 - 225mm Ø
€319.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 201mm to 225mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 201mm to 225mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557447 gives only the price for a complete range of different adapter-plates of 201mm to 225mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
LUNT 1.25" Slide-Tube for blocking filters
€48.00*
1.25" slide-tube, adapts Lunt Solar Systems 2" blocking-filter in star diagonal to telescopes with 1.25" focuser.FEATURESThread to blocking-filter: T2Length 1.25" slide-tube: 28mmSCOPE OF DELIVERYAdapter 2" LUNT Blocking Filter to 1.25" focuser(Blocking-filter not included)
LUNT B1200d1 Blocking-Filter in 1.25 inch zenith mirror diagonal
€1,299.00*
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 1080mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B1200d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B1200d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 1080mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 12mmUsable at telescopes up to 1080mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B1200d1 in 90° star-diagonal for 1.25 inch focuser
Customers also viewed
EXPLORE SCIENTIFIC 10x60 Finder and Guider Scope with Helical Focuser, 1.25inch and T2 connection
€239.00*
Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60
viewfinder telescope with removable eyepiece unit and crosshairs with
adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25
inch /31.7mm plug-in connection, as well as the T2 camera connection
thread (M42x0.75mm), allow the autoguiding required for long time
exposure to obtain a point-shaped star image. It can also be used as a
mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage
sharpness and viewing characteristics lift this viewfinder well above
the level of the usual 10x60 viewfinder scopes. The visible image is
bright and crisply sharp. Furthermore, this viewfinder has a very large
field of view (FOV) of 6.0 degrees. This makes finding and adjusting
objects much easier. The existing scale markings (pitch=0.85 degree) on the
crosshair are a good reference for estimating distances, and the open
centre markings also make it easier to centre objects precisely. All
lens surfaces are protected against weathering by multi-coating and
guarantee a bright viewfinder image due to the high light transmission
values. The adjustable red LED illumination unit is powered by two LR41
coin batteries. The main lens and the crosshairs can be focused
independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne
of the main applications for this telescope is the so-called
autoguiding. Here the usually larger photo-taking optics are actively
corrected by a smaller guiding telescope with a second tracking camera.
This means that the mechanical fluctuations in the tracking accuracy,
which are present in all astronomical telescope mounts, are measured by
the tracking camera and compensated accordingly. This is necessary in
order to obtain a point-shaped star image on the astrophotos during long
time exposures and to avoid unwanted star trails. For this purpose, the
guiding telescope is inserted into the existing viewfinder shoe of the
photo-taking optics and aligned parallel. If the existing viewfinder
shoe is not compatible, a suitable viewfinder shoe is also included.
With the 1.25 inch / 31,7mm plug connection at the rear end or via T2
thread connection (M42x0,75mm), a tracking camera can be mounted
afterwards. This is held securely by a brass ring clamp and 3 clamping
screws. Please note the required back focus for your tracking camera.
The focal plane (backfocus) is approx. 22mm behind the T2 thread. The
sensitive focusing on the guiding star is done by a large knurled wheel
of the mechanically precise manufactured helical focuser. For easy
reproduction of the point of focus, this has a white millimetre scale
from 0 to 28mm, which is attached by laser engraving. After the tracking
camera has been connected directly or via computer to the telescope
mount and the necessary basic settings have been made, the first
astrophotos with long time exposure can be taken.Use as mini travel telescopeThis
viewfinder and guide telescope can also be used quite simply as a mini
travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to
26mm and 1.25 inch/31.7mm plug connection are suitable. Especially
recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art.
02195xx) and 62 degree (02196xx) LER series. Note: Only straight view
use is possible.Metal viewfinder holder and viewfinder shoeThe
mount of this viewfinder and guide telescope is completely made of
aluminium and is a stable base. The viewfinder mount is suitable for
many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER
MESSIER etc. If the existing viewfinder shoe is not compatible, a
matching viewfinder shoe is also included. This can be attached to the
telescopic tube by means of four M5 screws. The bore distances of the
viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The
six large adjustment screws with non-slip knurling make it easy to align
the viewfinder, even with clammy fingers. All adjusting and clamping
screws have plastic tips that effectively prevent the viewfinder housing
and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual