BRESSER Wide field eyepiece 15x/16 (30mm) with diopter setting

Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope. Correction for up to full-frame camera sensors (24x36mm) The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm. How to use the Zero X field flattener with M48 thread connection This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.Filter thread on telescope side availableThe telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.FEATURESField flattener for Explore Scientific ED80, ED102 and ED127 APO telescopesRemoves field curvature from telescopesProduces round stars even at the edge of the image fieldImage sharpness at the edge is drastically increasedA clear benefit for the whole image aestheticsCorrection of field curvature for up to full-frame camera sensors (24x36 mm)Image field flattener without reduction factorOn the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter threadCamera side with large M48 threaded connectorWorking distance of 55 mm between field flattener and camera sensorFor telescopes with a focal length of approx. 480 to 952 mmOptimised for telescopes with focal ratios from F=6.0 to F=7.5Can also be used for various other APOsFully multi-coating on all lens surfacesHousing made of lightweight aluminium, black anodisedAluminium dust cap for M48 threadSCOPE OF DELIVERYZero X field flattener (1 piece)Dust caps

C-Mount MikroCam adapter for BRESSER Science microscopes connects the BRESSER MikroCam to many BRESSER Science microscopes. The camera can be connected directly. If you want to use a reducing lens 0.5x or 1.0x, the additional adapter with item code 5942030 is necessary.Suitable for the following BRESSER microscopes:BioScience Trino (5750600)Science TRM-301 (5760100)Science ADL-601P (5770200)Science ADL-601F (5770500)Science MPO-401 (5780000)Science IVM-401 (5790000)Science MTL-201 (5807000)Science ETD-301 (5806300)SCOPE OF DELIVERY1x adapter

Create light effects for realistic film sets or creative portraits with the Bresser Projection Lens. The Bresser Projection Lens is an optical snoot that allows you to project the light from a flash or LED lamp onto the background of your photos and videos. You have a choice of various colours and shapes. This way, you can make creative photos where the light contributes in a special way to the atmosphere of your shots. This optical snoot is a unique lighting tool that allows you to achieve a range of lighting effects that are not possible with standard light sources and shapers. Thanks to its manual zoom system, you can focus the light beam. Whether you're aiming for a modern, striking light pattern or a subtle texture in the background, the optical snoot with the included gobos gives you what you need. The optical snoot is a must-have tool for every creative photographer and videographer! Combine it with one of the included filters to add colour to your scene or model. The Bresser Projection Lens can be used with continuous light or studio flash, making the projection lens versatile for photos or videos. The spot can be easily attached using the universal Bowens S-bayonet connection. FEATURES Spot attachment module Suitable for photography and videography Connection for Bowens S-bayonet For projection of effects Various aperture masks 5x Colour filter 17x Gobos Maximum light power COB-LED: 300 Watts Maximum operating temperature: 70°C SCOPE OF DELIVERY 1x Optical Snoot 1x Gobo Holder 17x Gobos 9x Slider Graphics 5x Colour filter

NEW - now including a high-quality lens solar filter for the safe observation of sunspots, eclipses and planetary transits. A high quality telescope for night and solar observation.The BRESSER Messier 10 "Dobsonian is something very special. Despite the low price, it offers a variety of functions and quality that are sometimes unavailable in considerably more expensive telescopes. With its 254 mm diameter optics, this telescope is not limited to solar system observation of the Moon and brighter planets - you can also observe far out into the universe and see globular clusters, nebulae and galaxies. Details become visible in most deep-sky objects: globular clusters are broken down into individual stars and nebulae, which are only hinted at in smaller scopes, show considerable structure. This Dobsonian is unsurpassed in versatility within its price range: the excellent, large Hexafoc focuser has an opening of 65 mm - so even with large wide-field eyepieces, there is no noticeable vignetting from the eyepiece extension tube. The large elevation wheels also hold the telescope level with just the right amount of "sticktion", even when heavier eyepieces are used. And when a lot of heavier accessories are attached, such as the Bresser Binoviewer attachment, then the entire telescope tube can be moved within the tube rings - and everything is balanced again in a flash. The unsurpassed rigidity of the focuser makes it easy to focus - photography with this OTA is no problem either as the supplied extension tube for the focuser can be removed and a camera easily bought to a prime focus position. This is another strength of this universal telescope: if you want to take photos, you can simply unscrew the elevation wheels from the tube and place it on an equatorial mount with a standard dovetail rail - other rival Dobsonians do not offer this level of flexibility or pathway to more expansive astrophotography use. An optional dual speed 10:1 gear reduction for the focuser is available for those who need extra fine control of focus. If you consider that the focuser is the telescope part that is used most often, the supply of the Hexafoc on this telescope is a quantum leap for this price range.With the initial equipment you can observe immediately - a 6x30 viewfinder and a 25mm SPL eyepiece are included within the package.  If you want to transport the device as compactly as possible, it is easy with the new 10 "BRESSER Messier - the rocker box can be dismantled in a few simple steps, as the parts are assembled with metal quick-release connectors. A bulky rocker box quickly becomes a handy flat package of boards within a few minutes. This is a telescope whose versatility, performance and ease of use set new standards in this price range.Please note that while Newtonian type reflecting telescopes are very good for astronomical observations in the night sky, they not well-suited for observing nature and landscapes during the day. We therefore recommend BRESSER refracting or Cassegrain designs of telescopes for additional nature and landscape observations.PROPERTIESType: mirror telescopeMirror diameter: 254mm / focal length: 1270mm / F / 5Maximum useful magnification: 508 timesTelescope for night and solar observation2.5" HEXAFOC focuserMain mirror made of special glass, with low thermal expansionHassle-free focusing, even with heavy accessoriesEasy to move tubeDismountable rocker boxTube mounting on altitude bikes using clampsUse of the optics on other mounts as wellAdjustment and construction screws of different sizesBase diameter 54cmWhat's IncludedTube with Newtonian opticsFull aperture Solar filter6x30 viewfinder25mm Super Plössl eyepiece (Ø 31.7 mm / 1.25 ")1 extension tube 37.5mm for 2.5 " Hexafoc1 eyepiece adapter 1.25" to 2"/31.7 to 50.8 mm2 Tube Rings2 Altitude support wheelsRocker box with 2 base plates and mounting material (disassembled for self-assembly)Shipping dimensions Box1: 134x44x44cm - 19.0kgShipping dimensions Box2: 61x61x24cm - 17.0kg

You will be able to buy this NEW BRESSER PRODUCT from the end of July 2024!Discover the possibilities and forge new paths with the Nebula EXOS-2 Goto Mount!Mount and TripodThe BRESSER EXOS-2 is a stable mount with a high load capacity and precise tracking for visual observations and astrophotography. Double radial groove ball bearings in both axes ensure precise, smooth motion, and the RA axis bearing has been optimized to reduce backlash. Additionally, the tripod is reinforced to further suppress vibrations. The BRESSER EXOS-2 can be loaded with up to 13 kg of optics for purely visual use depending on the length and purpose!Nebula: the powerful and flexible Goto systemWith the new Nebula Goto system, set off for new astronomical shores. This system offers several control options. You can operate the mount directly via its own Nebula control interface using your smartphone or tablet (iOS and Android supported). Alternatively, you can also use a planetarium software such as SkySafari. Manual control remains an option as well. For this, a hand box for minor corrections or simple control commands is included.Furthermore, with the BRESSER Nebula Goto Kit, you can connect your laptop or PC directly via WIFI or LAN cable (recommended for faster data transfer) to the Nebula control unit. This not only gives you full control over the mount but also allows you to connect various devices such as cameras, motor focus, filter wheels, etc. directly to the control unit via various USB ports. This eliminates the need to connect each device to your computer via cables. The pre-installed program KStars / EKOS lets you comfortably control all devices from your PC or laptop. Electronic polar alignment or guiding can also be easily achieved with the Goto Kit, provided you have a camera connected. You are also not limited to the software of the Nebula control unit. Thanks to the installed ASCOM Alpaca driver, you can use your own programs on your computer to control the mount - whether it's Stellarium or N.I.N.A. The two stepper motors with a belt drive ensure a smooth, direct drive of the two axes. It's only important to have a good balance. FEATURES EXOS-2 MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Sturdy height-adjustable stainless steel tripod (Min. 69 cm / Max. 109.5 cm) Load capacity of up to 13 kg Spirit level for easy horizontal alignment Polar height scale for setting the latitude Polar scope with optional lighting (item no. 4964212) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight including counterweight: 14.8 kg Batteries: not included FEATURES GOTO SYSTEM Belt drive for a more precise, quieter tracking Stepper motors with high resolution (0.36´/microstep) Hand control box for direct control of the mount Virtual hand control box for smartphones and tablets PC control – ASCOM compatible USB ports for cameras, motors, filter wheels etc. SCOPE OF DELIVERY BRESSER EXOS-2 Mount Polar finder scope with optional illumination Stainless steel field tripod with accessory tray 1x 4.5-kg counterweight 2 stepper motors for the axes (RA and DEC) Raspberry Pi control unitBasic handbox 230V / 12V / 3 A power adapterConnection cableManual for download