EXPLORE SCIENTIFIC Zero X Field Flattener 2''/M48 for ED80, ED102 and ED127 APO
Field flattener for Explore Scientific ED80, ED102 and ED127 APOCHROMATS, correcting field curvature for up to full-frame camera sensors
- Flattener for Explore Scientific ED80, ED102 and ED127 APO telescopes
- Removes field curvature from telescopes
- Produces round stars even at the edge of the image field
- Correction for up to full-frame camera sensors (24x36 mm)
- Camera side with large M48 threaded connector
- Image field flattener without reduction factor
- Working distance of 55 mm between flattener and camera sensor
- For telescopes with a focal length of approx. 480 to 952 mm and focal ratios of F=6.0 and F=7.5
- Fully multi-coating on all lens surfaces
- Housing made of lightweight aluminium, black anodised
€129.00*
% €179.00* (27.93% saved)Available, delivery time: 1-3 days
Product number:
0510380
GTIN/EAN:
4007922064147
Product information "EXPLORE SCIENTIFIC Zero X Field Flattener 2''/M48 for ED80, ED102 and ED127 APO"
Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors
The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope.
Correction for up to full-frame camera sensors (24x36mm)
The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm.
How to use the Zero X field flattener with M48 thread connection
This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.
FEATURES
SCOPE OF DELIVERY
The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope.
Correction for up to full-frame camera sensors (24x36mm)
The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm.
How to use the Zero X field flattener with M48 thread connection
This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.
Filter thread on telescope side available
The telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.
FEATURES
- Field flattener for Explore Scientific ED80, ED102 and ED127 APO telescopes
- Removes field curvature from telescopes
- Produces round stars even at the edge of the image field
- Image sharpness at the edge is drastically increased
- A clear benefit for the whole image aesthetics
- Correction of field curvature for up to full-frame camera sensors (24x36 mm)
- Image field flattener without reduction factor
- On the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter thread
- Camera side with large M48 threaded connector
- Working distance of 55 mm between field flattener and camera sensor
- For telescopes with a focal length of approx. 480 to 952 mm
- Optimised for telescopes with focal ratios from F=6.0 to F=7.5
- Can also be used for various other APOs
- Fully multi-coating on all lens surfaces
- Housing made of lightweight aluminium, black anodised
- Aluminium dust cap for M48 thread
SCOPE OF DELIVERY
- Zero X field flattener (1 piece)
- Dust caps
| Colour: | black |
|---|---|
| Material: | Aluminium |
Zubehör
EXPLORE SCIENTIFIC Camera-Ring M48x0.75 for Canon EOS
€24.90*
Camera specific bayonet adapter (camera ring) for Canon EOS DSLR with M48x0.75 mm internal thread for astrophotography. By using the large thread M48x0.75 mm, the vignetting of e.g. a DSLR full format sensor is effectively avoided. Compared to the small T2 thread M42x0.75, this adapter has a free inner diameter of 47.5 mm. This camera ring is made of matt black anodised aluminium and weighs only 40 grams. The light path (overall length) is 10.0 mm. FEATURES Camera-specific bayonet adapter Canon EOS Large female thread M48x0.75 mm Free inner diameter of 47,5mm No vignetting for full format sensors Light path (overall length) is 10.0 mm Made of matt black anodized aluminium Weight only 40 grams SCOPE OF DELIVERY Camera ring for Canon EOS (1 piece)
EXPLORE SCIENTIFIC Camera-Ring M48x0.75 for Nikon
€24.90*
Camera specific bayonet adapter (camera ring) for Nikon DSLR with M48x0.75 mm internal thread for astrophotography. By using the large thread M48x0.75 mm, the vignetting of e.g. a DSLR full format sensor is effectively avoided. Compared to the small T2 thread M42x0.75, this adapter has a free inner diameter of 41.2 mm. This camera ring is made of matt black anodised aluminium and weighs only 30 grams. The light path (overall length) is 8.0 mm. FEATURES Camera-specific bayonet adapter NikonLarge female thread M48x0.75 mm Free inner diameter of 41,2mm No vignetting for full format sensors Light path (overall length) is 8.0 mm Made of matt black anodized aluminium Weight only 30 grams SCOPE OF DELIVERY Camera ring for Nikon (1 piece)
EXPLORE SCIENTIFIC Extension Ring Set M48x0.75 - 5 pieces (30, 20, 15, 10 and 5 mm)
€55.00*
Five extension tubes from 30 to 5mm length with thread connection M48x0,75mm in a set. For adjusting different distances of the camera to the focal plane of the telescope or the corrector/field flattener. There is an M48.0,75 internal and external thread in each individual tube. The M48x0.75 thread is also called large T2 photo thread or 2.0 inch filter thread. Camera specific bayonet adapters or color and nebula filters can be used. Included are 5 different tubes with the steps 30, 20, 15, 10 and 5 mm. The larger free inner diameter of 45.0 mm effectively prevents undesired vignetting of the camera sensor. The outer diameter of the sleeves is exactly 50.65 mm and can therefore be mounted directly in any 2 inch diameter eyepiece adapter. FEATURES Extension sleeves M48x0,75 in set Five extension sleeves: 30, 20, 15, 10, 5 mm Use with correctors and field flatteners Distance adjustment from camera to focal plane Suitable for camera-specific bayonet adapters Also suitable for 2.0 inch colour and nebular filters Internal and external thread M48x0.75 mm (large T2 thread) Large inner diameter of 45.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Total weight 85 grams SCOPE OF DELIVERY Extension sleeves M48x0.75 (5 pieces)
EXPLORE SCIENTIFIC T2 Reduction Adapter M48x0.75 to M42x0.75
€24.90*
For connecting T2 camera accessories with the smaller M42x0.75 thread to the larger M48x0.75 thread. Also ideal for adapting 2 inch colour and nebula filters between camera and telescope. FEATURES Connection of accessories with different T2 thread sizes Adaptation of 2 inch color and nebula filters between camera and telescope Internal thread M48x0.75 mm (large T2 thread) External thread M42x0.75 mm (small T2 thread) Free inner diameter of 39.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Weight is only 10 grams SCOPE OF DELIVERY Reduction adapter (1 piece)
%
EXPLORE SCIENTIFIC OPTOLONG 2" L-Pro Deep-Sky Light Pollution Filter
€206.10*
€229.00*
(10% saved)
LPS filter L-Pro for deep sky nebula constellation photography.
The relentless spread or urbanization and its associated light pollution
have become a growing problem for all amateur astro photographers. The
current solutions to the problem can be expensive and might include the
purchase of a monochrome camera, several types of narrowband filters and
a filter wheel. Especially with inexpensive newtonian telescopes,
double-lens ED refractors or even achromats, the L-Pro filters open
up completely new possibilities for the capture of high-class
astronomical images even out of the light polluted city. CMOS cameras
can deliver images like monochrome cameras. This new generation of
filters makes it possible to take amazing astrophotos directly from the
light-polluted city with all its artificial light sources.L-Pro is a multi-bandpass filter which offers better color balance by maximizing the transmission band. The balanced transmission allows astrophotos to be taken with minimal color cast to broadband emission objects such as galaxies, reflection nebulae and globular star clusters. L-Pro is the best choice for light pollution suppression. L-Pro description L-Pro (L-Professional) filter is designed to improve the visibility of various deepsky objects. By selectively reducing the transmission of wavelengths of light pollutants, specifically those produced by artificial lightings including mercury vapor lamps, both high & low pressure sodium vapor lights and the unwanted natural light caused by neutral oxygen emission in our atmosphere (i.e. skyglow). Together with the highly transparent in main nebula emission lines at OIII (496nm and 500nm), H-beta (486nm), NII (654nm and 658nm), H-alpha (656nm) as well as SII (672nm), the filter is suitable for enhancing the contrast and details for both visual and photograghic purpose at sub-rural areas with heavy light pollution.
L-Pro is a multi-bandpass filter which offers better color balance by maximizing the transmission band. The balanced transmission allows astrophotos to be taken with minimal color cast to broadband emission objects such as galaxies, reflection nebulae and globular star clusters. L-Pro is the best choice for light pollution suppression. Main use and performance Suitable for visual observation and astrophotography.
L-Pro filter has a very low transmission reduction rate against continuous spectrum space objects, and thus is quite effective in suppressing light pollution sources when shooting galaxies, reflection nebulae and globular star clusters. The same holds true for visual star observations.
L-Pro filter alone can suppress infrared wavelength, and thus can be used at ease for ''L'' image shootings with CCDs.
Light pollution filters do not eliminate the effects of light pollution or increase the object’s brightness. In many cases, they increase the contrast between nebula and night sky, not brightening the nebula. WARNING: These nebula filters are not designed for sun observation. DO NOT LOOK AT THE SUN WITH THIS FILTER. You will go BLIND if you ignore this warning.Coating technology L-Pro has a multiple anti-reflective coating on the optical substrate. The L-Pro filter uses a precision coating based on ion deposition coating technology. This ensures durability and scratch resistance as well as stability on the CWL (central wavelength), which is not affected by temperature changes. Absolute precision and homogeneity of the coatings as well as maximum values for transmission in the passband and optical density in the off-band range are guaranteed for all filters. FEATURES Professional visual and photographic filter for astronomy Improves deep sky nebula constellation photography Best choice for broadband light pollution suppressionFilter diameter: 2.0 inch / 50.8mm Connecting thread: M48x0.75mmSelected optical glass material Spectrum: 380-750nm Surface Quality: 60/40 (Refer to MIL-O-13830) Fine-optically polished glass to ensure accurate 1/4 wavefront and highest parallelism over the both surfaces High transmission at major nebula emission lines (i.e. H-alpha 656nm, OIII 496nm&500nm, SII 672nm and H-beta 486nm)Precision off-band blocking, specifically the major emission lines of artificial light pollution (i.e. Na 589nm, Hg 435nm and 578nm)SCOPE OF DELIVERY L-Pro filter (1pc) Dust protection box (1pc)
EXPLORE SCIENTIFIC OPTOLONG 2'' L-eNhance Deep-Sky Light Pollution Filter
€229.00*
L-eNhance Filter for deep sky nebula photography from the cityThe relentless spread or urbanization and its associated light pollution have become a growing problem for all amateur astro photographers. The current solutions to the problem can be expensive and might include the purchase of a monochrome camera, several types of narrowband filters and a filter wheel. Especially with inexpensive newtonian telescopes, double-lens ED refractors or even achromats, the L-eNhance filters open up completely new possibilities for the capture of high-class astronomical images even out of the light polluted city. CMOS cameras can deliver images like monochrome cameras. This new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources. The narrow bandpass for the wavelengths of O-III, H-Beta and H-Alpha and the almost complete attenuation of the interfering light sources of these new filters make this an ideal solution.
L-eNhance Description L-eNhance provides an economical and practical solution for amateurs. It is a tri-band pass filter which has been designed for DSLR (digital SLR), color CMOS and monochrome CCD cameras. The convenience and cost-effectiveness of this filter allows amateurs to take a rich selection of astronomical images, even in bright, heavily light-polluted areas. We believe the design of our L-eNhance filter is a technical innovation among filters. It effectively isolates the H-Alpha, H-Beta, and Oxygen III nebula emission lines and achieves a maximum transmission of up to 90%. The performance of this filter delivers images that superbly control the impact from light polluted skies. Main Use and PerformanceThis new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources. The narrow bandpass for the wavelengths of O-III, H-Beta and H-Alpha and the almost complete attenuation of the interfering light sources do not require very large or extremely expensive telescopes. No, especially with inexpensive newtonian telescopes, double-lens ED refractors or even achromats, these filters open up completely new possibilities for high-class astronomical images. Furthermore, with the help of these filters, CMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras. WARNING: These nebula filters are not designed for sun observation. DO NOT LOOK AT THE SUN WITH THIS FILTER. You will go BLIND if you ignore this warning. Coating technology L-eNhance has a multiple
anti-reflective coating on the optical substrate. The L-eNhance filter uses a
precision coating based on ion deposition coating technology. This
ensures durability and scratch resistance as well as stability on the
CWL (central wavelength), which is not affected by temperature changes.
Absolute precision and homogeneity of the coatings as well as maximum
values for transmission in the passband and optical density in the
off-band range are guaranteed for all filters. FEATURES Professional photographic filter for astronomy Improves deep sky emission nebula photography Best choice for enhanced light pollution suppression For taking pictures also from highly light-polluted areas Tri-band filter with high transmission for O-III, H-Beta and H-Alpha linesDoes not require very large or extremely expensive telescopesExcellent results also with inexpensive newtonian telescopes, double-lens ED refractors or even achromatsCMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras Balanced colour for a natural image Filter diameter: 2,0 inches / 50,8 mm Connecting thread: M48x0.75mmSelected optical glass material Spectrum: 300-1000nm Off-Band Blocking: > 99% Surface Quality: 60/40 (Refer to MIL-O-13830) Fine-optically polished to ensure accurate 1/4 wavefront and highest parallelism over the both surfacesHigh transmission at major nebula emission lines (i.e. H-alpha 656nm, OIII 496nm&500nm and H-beta 486nm).
SCOPE OF DELIVERY L-eNhance filter (1pc) Dust protection box (1pc)
EXPLORE SCIENTIFIC OPTOLONG 2'' L-eXtreme Deep-Sky Light Pollution Filter
€319.00*
L-eXtreme Filter for deep sky nebula photography from the city The relentless spread or urbanization and its associated light pollution have become a growing problem for all amateur astro photographers. The current solutions to the problem can be expensive and might include the purchase of a monochrome camera, several types of narrowband filters and a filter wheel. Especially with inexpensive but fast newtonian telescopes, double-lens ED refractors or even achromats, the L-eXtreme filters open up completely new possibilities for high-class astronomical images even from the light polluted city. CMOS cameras can deliver images like monochrome cameras. This new generation of filters makes it possible to take amazing astrophotos directly from the heavily light-polluted city with all its artificial light sources. The dual narrow bandpass for the wavelengths of O-III and H-Alpha and the almost complete attenuation of the interfering light sources of these new filters make this an ideal solution.
L-eXtreme Description L-eXtreme is a two 7nm narrow bandpass filter which can be used with one-shot color cameras like DSLRs (digital SLR), color CMOS and monochrome CCD cameras. The convenience and cost-effectiveness of this filter allows amateurs to photograph rich emission nebulas, even in bright, heavily light-polluted skies. The L-eXtreme filter is the better choice for fast optical systems at a competitive price. It isolates the H-Alpha and Oxygen III nebula emission lines so that the contrast and signal-to-noise ratio between nebulae are maximized. The design of our L-eNhance filter is a technical innovation among filters. For people who live in heavily light polluted areas or when the moon is out, the L-eXtreme is a very good choice.
Main Use and Performance This new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources. The narrow bandpass for the wavelengths of O-III and H-Alpha and the almost complete attenuation of the interfering light sources do not require very large or extremely expensive telescopes. No, especially with inexpensive but fast newtonian telescopes, double-lens ED refractors or even achromats, these filters open up completely new possibilities for high-class astronomical images. Furthermore, with these filters CMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras. WARNING: These nebula filters are not designed for sun observation. DO NOT LOOK AT THE SUN WITH THIS FILTER. You will go BLIND if you ignore this warning. Coating technology L-eXtreme has a multiple
anti-reflective coating on the optical substrate. The L-eXtreme filter uses a
precision coating based on ion deposition coating technology. This
ensures durability and scratch resistance as well as stability on the
CWL (central wavelength), which is not affected by temperature changes.
Absolute precision and homogeneity of the coatings as well as maximum
values for transmission in the passband and optical density in the
off-band range are guaranteed for all filters. FEATURESProfessional photographic filter for astronomyImproves deep sky emission nebula photography Best choice for extreme light pollution suppression For taking pictures also from highly light-polluted areas Dual-narrow-band filter with high transmission for O-III and H-Alpha linesDoes not require very large or extremely expensive telescopesExcellent results also with fast inexpensive newtonian telescopes, double-lens ED refractors or even achromatsL-eXtreme filter is the better choice for fast systems at a competitive priceCMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras Filter diameter: 2.0 inches / 50.8 mmConnecting thread: M48x0.75mmSelected optical glass material Spectrum: 300-1000nm Off-Band Blocking: > 99 % Surface Quality: 60/40 (Refer to MIL-O-13830) Fine-optically polished to ensure accurate 1/4 wavefront and highest parallelism over the both surfacesHigh transmission at major nebula emission lines (i.e. H-alpha 656nm and OIII 496nm&500nm)SCOPE OF DELIVERY L-eXtreme filter (1 pc) Dust protection box (1 pc)
Similar products
EXPLORE SCIENTIFIC Teleextender 3x 50,8mm/2"
€219.00*
With teleextenders it is possible to extend the effective focal length of a telescope system, resulting in higher magnification for the observation of the moon, the planets or small Deep-Sky objects with the same eyepieces. So you can use the advantages of eyepieces with longer focal length - such as the bigger eye distance and the more relaxed observing comfort - at high magnifications also.These teleextenders incorporate a telecentric optical design that deliveres a excellent image sharpness over the whole field of view and are premium choices for visual observations and astrophotography. The combination of excellent fully multicoating with superior optical design makes the Focal Extenders superior to classic Barlow lenses.FEATURESSuitable for visual observations and astrophotographyTriples the effective total focal length of the telescopeFour lens telecentric designFully multicoatedFilter thread for color or nebula filtersSCOPE OF DELIVERY Fokal Extender 3 x Adapter 2" (50,8mm) auf 1,25" (31,7mm)
EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector
€419.00*
The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this.
Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted.
SPECIFICATIONS
Reduces the focal length by 0.7x at f/8
Flattens the field for astrophotography
Developed for ED127 und ED152 APO telescopes
Also fits Explore Scientific ED102 and ED165 telescopes - and others
Free aperture: 65mm
Inner thread for telescope adaption: M76x0.75mm
Outer thread for camera adaption: M72x0.75mm
3" focuser barrel adaptor included
Adaptor for Explore Scientific focuser M54x0.75mm included
T2 camera adaptor M42x0.75mm included
Diameter: 78.5mm; length: 100mm
Length without adaptors: 52mm
Weight without adaptors: 530g
What's Included
Reducer/Flattener
3" focuser barrel adaptor
Adaptor for Focuser M54x0.75mm
T2 camera adaptor M42x0.75mm
Dust caps
EXPLORE SCIENTIFIC HR Coma Corrector
€349.00*
After three years of testing and refining we are extremely proud to present the new Explore Scientific High Resolution (HR) Coma Corrector. This corrector is a class of it´s own - it is fully functional for visual use and expands the focal length by only 6%! The Explore Scientific Coma Correktor is delivered as a complete set together with a rotating helical focuser with laser-etched scale, so you get a full package: corrector, adaptor to T2 (M42x0.75mm), adaptor to M48 (M48x0.75) and the helical focuser for visual fun.
This coma corrector really is "high resolution" - it deliveres a visual polystrehl performance of 0,98 at f/4 and 0,96 at f/3! So it can stay in the telescope - and you will not only enjoy a tack-sharp Jupiter, but aslo sharp and defined moons in the future!
What this means in terms of performance is shown in the three pictures with the graphs - the sharpness increase in those comparisons with and without corrector are stunning (examples are 400mm f/4, f/3,5 and f/3).
Please notice: These graphs are for FLAT FIELD! You will get this performance without refocussing!
Diameter of the field is 30mm - it doesn´t make sense to increase this with 2" and fast optical systems. Length of the 2" corrector barrel is approx. 85mm and it can be used with almost all 2" focusers on the market. To use the HR Coma Corrector visually, you need to have at least 32mm spare inward travel at your focuser, while the focus is on the same plane as the focusers end. Photographically there is no problem - the HR Coma Corrector shifts the focus outward by about 35mm, so that you will have no problem in achieving focus, when you are able to focus your camera without the HR Coma Corrector.
FEATURESEliminates coma, field-curvature and astigmatism in newtonians Diffraction limited performance on axis and in the field Flattens the field Works for very fast systems down to f/3
Four-lens construction Can be used with almost all 2" focusers on the market SCOPE OF DELIVERY High Resolution (HR) Coma Corrector Adaptor to T2 (M42x0.75mm) Adaptor to M48 (M48x0.75) Helical focuser
EXPLORE SCIENTIFIC Teleextender 5x 31,7mm/1.25"
€129.00*
With teleextenders it is possible to extend the effective focal length
of a telescope system, resulting in higher magnification for the
observation of the moon, the planets or small Deep-Sky objects with the
same eyepieces. So you can use the advantages of eyepieces with longer
focal length - such as the bigger eye distance and the more relaxed
observing comfort - at high magnifications also.These teleextenders
incorporate a telecentric optical design that deliveres a excellent
image sharpness over the whole field of view and are premium choices for
visual observations and astrophotography. The combination of excellent fully multicoating with superior optical
design makes the Focal Extenders superior to classic Barlow lenses.Features: Suitable for visual observations and astrophotographyExtending the effective total focal length of the telescope by a factor of 5xFour lens telecentric design Fully multicoatedFilter thread for color or nebula filters
%
EXPLORE SCIENTIFIC Special T2-Ring Canon 3" Reducer
€46.80*
€52.00*
(10% saved)
Allows the use of the 510360 EXPLORE SCIENTIFIC 0,7x Reducer/corrector straight with a Canon DSLR
EXPLORE SCIENTIFIC Hexafoc 2.5 adaptor for 3" 0.7x Corrector
€56.00*
This adaptor enables you to connect the 0510360 0.7x focal reducer/field flattner to telescopes that feature the 2.5" Hexafoc. The big inner diameter of the 2.5" Hexafoc is fully utilised with this adaptor to avoid vignetting.What's Included1x Hexafoc 2.5 adaptor for 3" 0.7x Corrector ring
EXPLORE SCIENTIFIC Extension Ring Set M48x0.75 - 5 pieces (30, 20, 15, 10 and 5 mm)
€55.00*
Five extension tubes from 30 to 5mm length with thread connection M48x0,75mm in a set. For adjusting different distances of the camera to the focal plane of the telescope or the corrector/field flattener. There is an M48.0,75 internal and external thread in each individual tube. The M48x0.75 thread is also called large T2 photo thread or 2.0 inch filter thread. Camera specific bayonet adapters or color and nebula filters can be used. Included are 5 different tubes with the steps 30, 20, 15, 10 and 5 mm. The larger free inner diameter of 45.0 mm effectively prevents undesired vignetting of the camera sensor. The outer diameter of the sleeves is exactly 50.65 mm and can therefore be mounted directly in any 2 inch diameter eyepiece adapter. FEATURES Extension sleeves M48x0,75 in set Five extension sleeves: 30, 20, 15, 10, 5 mm Use with correctors and field flatteners Distance adjustment from camera to focal plane Suitable for camera-specific bayonet adapters Also suitable for 2.0 inch colour and nebular filters Internal and external thread M48x0.75 mm (large T2 thread) Large inner diameter of 45.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Total weight 85 grams SCOPE OF DELIVERY Extension sleeves M48x0.75 (5 pieces)
BRESSER Barlow Lens 5x (1.25")
€49.90*
With the usage of barlow lenses, you can extend the focal distance of telescopes and enhence the magnification of your observated deep sky objects. Thus, you can use the advantages of eyepieces with greater focal distance like the long eye relief as well as a more convenient insight at higher magnifications. Due to their 3-element air-spaced lens design with ED glass, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.FEATURESsuitable for observations and photographyincrease fivefold the focal distance3-element air-spaced lens design with ED glassfully multi-coated brass eyepiece clamping ringSCOPE OF DELIVERYBarlow lens (1pc)
%
EXPLORE SCIENTIFIC MPCC Field Flatt.ED APO+NikonT2
€79.00*
€145.00*
(45.52% saved)
The image plane of many telescopes is not plane, but curved. This results in a picture that has its optimal focus only in the center of the field of view - the edge of the field is out of focus and thus unsharp. The human eye is able to accomodate most of this but a camera will show stars that get increasingly unsharp towards the edge of the field. The Explore Scientific Multi Purpose Curvature Corrector eliminates field curvature in a variety of telescopes - Explore Scientific Apos and many other refractors and cassegrain telescopes. This increases the edge sharpness in the image drastically. Improves edge sharpness not only with Explore Scientific Apos, but also with many other refractor and cassegrain telescopes. This image field leveller fits all Nikon DSLR cameras, but can also be used for other camera types due to the universal T2 thread connection. This requires an optional camera-specific T2 ring. SPECIFICATIONSImage flattener for Nikon DSLR cameras Eliminates the field curvature of ED APO telescopes Can also be used for various cassegrains The image sharpness at the edge is drastically increased 2 inch/50.8mm push-in connector with filter thread T2 threaded connection (M42x0,75mm) Full multi-coating on all lens surfacesStainless steel housing Adapter for Nikon F bayonet included DELIVERY SCOPE Bildfeldebner Nikon (1 piece)
%
BRESSER Erecting Lens 1.5x (1.25")
€11.00*
€21.90*
(49.77% saved)
The BRESSER Erecting Lens creates an upright and right reading image. Furthermore, it increases the magnification by the factor 1.5. The erecting lens serves as a helpful accessory for nature observation or for astronomy beginners and is used for refractors (lens telescopes). Not recommeded to use with reflectors (newtonian telescopes).
FEATURESEyepiece connection diameter: 31.7mm (1.25")Magnification: 1.5xSCOPE OF DELIVERYErecting Lens 1.5x (1.25")
%
BRESSER Achromatic 3x (1.25") Barlow Lens
€22.00*
€32.00*
(31.25% saved)
The magnification of your telescope can be trippled with the use of this achromatic BRESSER Barlow Lens 3x 31.7 mm (1.25'').
EXPLORE SCIENTIFIC Teleextender 2x 31.7mm/1.25"
€119.00*
With teleextenders it is possible to extend the effective focal length of a telescope system, resulting in higher magnification for the observation of the moon, the planets or small Deep-Sky objects with the same eyepieces. So you can use the advantages of eyepieces with longer focal length - such as the bigger eye distance and the more relaxed observing comfort - at high magnifications also.These teleextenders incorporate a telecentric optical design that deliveres a excellent image sharpness over the whole field of view and are premium choices for visual observations and astrophotography. The combination of excellent fully multicoating with superior optical design makes the Focal Extenders superior to classic Barlow lenses.Features: Suitable for visual observations and astrophotographyDoubling the effective total focal length of the telescopeFour lens telecentric design Fully multicoatedFilter thread for color or nebula filters
Customers also viewed
EXPLORE SCIENTIFIC iEXOS-100 PMC-Eight Wifi Goto Mount
€499.00*
The iEXOS-100 is a complete astronomical computerized Wifi or Wired GOTO Equatorial Tracker with integrated PMC-Eight electronics suitable for attaching Small Telescopes or DSLR Cameras attached to a standard Vixen Style Dovetail Plate. Also a ST-4 compatible autoguider port for active tracking control is included. Use with the free ExploreStars App for Tablets (Windows, Android, iOS), or with the free ASCOM Standards Compliant POTH Client from Explore Scientific (either wired or wireless) to work with virtually any sky software that supports ASCOM. The iEXOS-100 utilizes a proven German equatorial mount design and Explore Scientific’s revolutionary PMC-Eight™ motion control system to flawlessly navigate the night sky and track objects as they journey across it. This combination provides superior observing and imaging performance without a prohibitive price tag.
GOTO systems play an important role in the world of amateur astronomy because they ensure users spend less time searching for particular objects and more time observing and imaging. The PMC-Eight with its versatile connections supported with free to download apps for Window, Android, and iOS, or through the free to download ASCOM POTH Client to connect to your favorite ASCOM Compliant Astronomical Software, can allow you to control the telescope from a few feet away or by communicating computer-to-computer with an Internet connection from virtually anywhere in the world. One of the standout features of the iEXOS-100 system is its German equatorial design. When it comes to tracking the stars with a telescope, there is nothing that compares to a German equatorial mount because it will follow objects as they rise in the east and set in the west. For observers, a German equatorial mount makes it easy to keep your celestial target in your eyepiece. For imagers, it helps you avoid common astrophotography pitfalls like field rotation.
Before you can track an object, you need to find it, and that objective can be daunting when you’re faced with a vast expanse of inky black sky. The iEXOS-100 puts a powerful GOTO system in your arsenal of astronomical tools that takes the frustration out of navigating the night sky. This integrated version of Explore Scientific’s PMC-Eight™ system transcends the industry standard single processor by utilizing eight CPUs that operate independently of one another to focus on defined functions. This delegation of tasks among the processors results in a system that offers superior responsiveness, efficiency, reliability and astoundingly fast timing intervals for seamless images and accurate tracking. Although it is internally complex, the GOTO system can be easily operated from your own Apple, Android or Windows tablet using the ExploreStars app, which has an intuitive nature that makes it simple and quick to align your telescope, navigate the stars and learn specifics about tens of thousands of celestial objects. This dynamic app is fueled by a database that is routinely updated to ensure it remains a relevant resource.
Our commitment to creating a streamlined GOTO mount is obvious in other design choices. The iEXOS-100 has locking clutches that will let you quickly reposition your telescope from one side to the other and an altitude knob for smooth height adjustments. The mount base includes a small polar alignment tunnel that allows users to roughly align their observing setup with Polaris. It also has a simple bubble level that comes in handy when stabilizing your tripod. Other features include a bracket for holding the battery pack, which powers the PMC-Eight system™ through 8 C batteries (not included); two 1 kg counterweights for balancing; and glow-in-the-dark markers on certain points of the mount and tripod so you can stay oriented with your setup at night. The mount is designed to hold up to 5 kg of astronomical equipment.IMPORTANT NOTETo start using ExploreStars app, download the free app and download the celestial data set that contains the astronomical catalogs, reference images, and reference text. Simply by unzipping the ExploreStars folder containing the expanded celestial data set into your Pictures directory, you will expand the native database from a thousand objects to over seventy thousand objects. SOFTWARE DOWNLOADhttps://explorescientificusa.com/pages/software-and-downloads-for-pmc-eight-systemFEATURESIntegrated Explore Scientific PMC-Eight™ Wifi GOTO systemBeautiful full graphical user interface using our very own ExploreStars OpenGotoWifi controlled by Tablet, Notebook or Desktop PC with 7'' or larger display, and Wifi function (computer device not included)Needed system software of optional computer or tablet: WIN8.1, WIN10+11, iOS, Android 4.4 or higherClassic four-button pattern and virtual joystick for guiding, centering, moving and slewing on the touch screenIntuitive 2 star and 3 star alignment procedure Includes a small polar alignment tunnelStandard Vixen Style Dovetail AdapterMount load capacity up to 5 kgMultiprocessor Micro Controller with 8 CPU´sMicro-Stepper Motors and worm gearsSilent Belt-Drive System Mini-USB port for INDI/ASCOM wired computer connectionST-4 compatible autoguider portINDI and ASCOM Driver available: YES, supports also Pulse-GuidingYOU can write your own code and import it into this softwareGPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phoneGlow-in-the-dark markings on mount and tripodWeight mount-head: 4,0 kg ; weight tripod: 2,5 kgSCOPE OF DELIVERYExplore Scientific iEXOS-100 PMC-8 Wifi Goto MountStainless steel tripod with bubble levelCounter weight 2 x 1,0 kg Battery compartment 12 volts with bracket / (8 x C-Cells not included) Coil-cord for DEC motorGlow-in-the-dark markings on mount and tripodExploreStars Software via download for freeInstruction manualIMPORTANT NOTE: This package doesn´t include any WINDOWS/iOS/Android Computer or Tablet.FAQ / KNOWLEDGE-BASE: https://explorescientificusa.com/pages/explore-scientific-knowledge-base-and-faqsPMC-Eight GROUPS: https://espmc-eight.groups.io/g/MAIN
EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector
€419.00*
The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this.
Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted.
SPECIFICATIONS
Reduces the focal length by 0.7x at f/8
Flattens the field for astrophotography
Developed for ED127 und ED152 APO telescopes
Also fits Explore Scientific ED102 and ED165 telescopes - and others
Free aperture: 65mm
Inner thread for telescope adaption: M76x0.75mm
Outer thread for camera adaption: M72x0.75mm
3" focuser barrel adaptor included
Adaptor for Explore Scientific focuser M54x0.75mm included
T2 camera adaptor M42x0.75mm included
Diameter: 78.5mm; length: 100mm
Length without adaptors: 52mm
Weight without adaptors: 530g
What's Included
Reducer/Flattener
3" focuser barrel adaptor
Adaptor for Focuser M54x0.75mm
T2 camera adaptor M42x0.75mm
Dust caps