Double-stack module for more contrast and details on the solar surface with the LS80MT and LS100MT telescopes.At the LS80MT and LS100MT telescopes double-stacking is possible with this internal DSII double-stack module when observing the sun in H-Alpha. The DSII modules reduce the bandwidth to <0.5 Angstrom. They are designed to show the surface details of the sun better, the contrast is significantly increased and therefore filaments and active regions are better visible.The DSII/SFPT module is designed exclusively for use in LS80MT and LS100MT telescopes, it cannot be used at other telescopes. It is used between the existing H-Alpha unit and the focuser on the telescope. Installation is simple, no additional adapters or tools are required.FEATURESBandwidth: <0.5 AngstromTuning: Air Pressure Tuning System SCOPE OF DELIVERYDSII module with internal Etalon for LS80MT and LS100MT telescopesPressure Tuner System(LS80MT or LS100MT telescope not included!)
The LS80MT solar telescopes can be upgraded with this optional conversion kit. This allows the telescopes to be used as 2-lens ED apochromatic refractor for observation and photography of the starry night sky.The H-Alpha system of the LS80MT telescopes can be easily replaced by this conversion kit. The conversion kit offers a high quality and solid R&P focuser. Even the heaviest cameras or other accessories will be hold without any problems and can be focused sensitively by the integrated 10:1 reduction.Simply loosen three knurled screws holding the H-Alpha unit including the focuser at the LS80MT. Attach here the new focuser, and your LS80MT is transformed into a 2-lens apochromatic telescope. The new focuser offers 85mm focusing way with backlash- and tilt-free mechanics also when using heavy accessories. A 2 inch clamp is directly at the focuser, and an adapter to 1.25 inch is included in delivery.But this is not all: With this conversion kit Herschel-wedges or Ca-K modules can be used at the LS80MT telescopes for solar observation. This makes it possible to observe the sun in H-alpha, in Calcium-K wavelength light, or in White-Light - with one and the same telescope!This conversion kit turns the LS80MT into a real all-round telescope!FEATURESBacklash- and tilt-free mechanics85mm focusing way10:1 reduction2 inch and 1.25 inch connectionSCOPE OF DELIVERYHigh quality 2 inch focuser with adapter to LS80MT telescopesAdapter from 2 inch to 1.25 inchInstruction manualLS80MT telescope not included! Can only be used together with a LS80MT solar telescope. This conversion kit is absolutely necessary if a LS80MT telescope should be used for night sky observation.
The anti-reflection filter is an accessory for the DSII/SFPT double-stack module for the Lunt Solar Systems LS80MT and LS100MT telescopes. Reflections that may occur there can be effectively reduced with this anti-reflection filter if necessary.At the LS80MT and LS100MT multipurpose telescopes from Lunt Solar Systems, double-stacking is possible in H-alpha mode for solar observation with the internal DSII/SFPT double-stack modules (item number 0551395). The DSII modules reduce the bandwidth to <0.5 Angstroms. The DSII modules are designed to show better the surface details of the Sun, the contrast is significantly increased, and therefore filaments and active areas are better visible.But the DSII modules can also induce reflections, which can show up as a strong brightening around the sun. This so-called ''glow'' is not a problem when observing the solar surface. But it can complicate the observation of prominences, and many observers find it disturbing. The HRG/SFPT anti-reflection filter is designed to solve this problem. The filter effectively reduces the reflections. But please also note that the image will become darker by using this anti-reflective filter.The HRG/SFPT anti-reflection filter is easy to install. It is not necessary to return the telescope to the manufacturer, the filter can be easily installed by the user.This filter cannot be used separately! It can only be used on a Lunt Solar Systems LS80MT or LS100MT telescope together with a DSII/SFPT Double-Stack module.SCOPE OF DELIVERYHRG/SFPT anti-reflection filterInstruction manual
Field-flattener and focal length reducer for deep-sky astrophotography. Designed for the multipurpose APO telescopes of the Lunt-Solar-Systems LS80MT, LS100MT and LS130MT series.At the telescopes of the MT series from Lunt Solar Systems, the H-Alpha filter unit for solar observation can be removed, then these telescopes can be used as high quality ED APO's for observing and photographing the night sky.This accessory for the LS80MT, LS100MT and LS130MT telescopes shortens the focal length by a factor of 0.8x, providing a larger field of view for deep-sky astrophotography. This also allows shorter exposure times. At the same time, the field of view is flattened for photography.On the camera side, the reducer/field-flattener has a T2 male thread (M42x0.75). DSLR cameras can be connected here directly with a normal T2 ring.For other cameras, an M39x0.75 female thread is available in addition to the T2 male thread. The distance between reducer/field-flattener and camera sensor should be around 50 to 55mm. Normal T2 extension sleeves can be used to achieve this distance.On the telescope side, the following connections are provided: 2 inch socket, M54x0.75 male thread, M63x1 male thread and M68x1 male thread.FEATURESShortens focal length of F/7 ED telescopes by a factor of 0.8xFlattened field of view for photographyT2 thread for camera connectionWorking distance 50 to 55mm2 inch socket and M54x0.75 thread for connection to telescopesAdapter to M63x1 and M68x1Weight only reducer/field-flattener: 0.25kgWeight together with adapter to M63 & M68: 0.36kgSCOPE OF DELIVERY0.8x reducer/field-flattenerAdapter to M63x1 and M68x1
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1800 blocking filter.Solar observing in H-alpha:The LS80MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.Blocking-filter is the B1800. The B1800 is very good for visual solar observing and also for photography.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B1800 with 1.25" and T2 connectionFocuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-TunerB1800 blocking filter in star-diagonal housing2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1200 blocking filter.Solar observing in H-alpha:The LS80MT/B1200 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.Blocking-filter is the B1200. The B1200 is good for visual solar observing. Also solar imaging is possible by cameras with small sensor chip. We recommend a LS80MT with B1800 blocking-filter by using cameras with large sized sensor chips.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B1200 with 1.25" and T2 connectionFocuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-TunerB1200 blocking filter in star-diagonal housing2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system and good 2 inch (50.8mm) R&P focuser. Delivered without blocking filter, use for H-Alpha sun observation only possible with additional blocking filter!This telescope is supplied without blocking filter. We offer a wide range of additionally available blocking filters in different sizes, either mounted in a 90° star-diagonal housing or in a straight extension tube. These are all usable with this telescope.ATTENTION: Without such an additional blocking filter you cannot use this telescope for H-alpha solar observation!Solar observing in H-alpha:The LS80MT is a telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.This version of the LS80MT is delivered without blocking filter. Therefore an additional blocking filter is required to use the telescope for solar observation in the H-alpha wavelength. You can choose from the wide range of Lunt Solar Systems blocking filters and decide for example if you want a blocking filter in a 90° star-diagonal housing or one in a straight extension tube.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerSupplied without blocking filter, additionally available blocking filter absolutely necessary!Focuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-Tuner2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
To watch videos, you need to accept third-party cookies:
Facebook
Vimeo
Cookies
We use cookies to personalise and improve content and services, deliver relevant advertising and provide a secure experience. You can review your cookie controls at any time. Learn more about the use and control of cookies in our privacy policy.Imprint