Vixen AP Photo Guider Shaft

Counterweight rod for balancing the AP Photoguider, the POLARIE or the POLARIE U Star Tracker with corresponding Vixen counterweights

Counterweight rod for dovetail rail
Can be used on AP modules and Polarie Star Tracker
Helps balance the weight of your camera rig
Diameter 23x135mm
Shank diameter: 20mm
Effective length of the counterweight rod: 130mm
Weight: 330g

€52.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Product number: X000052

GTIN/EAN: 4955295258260

Product information "Vixen AP Photo Guider Shaft"

The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw.
It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker.

PROPERTIES

Shank diameter: 20mm
Size: diameter 23x135mm
Effective length of the counterweight rod: 130mm
Weight: 330g

WHAT'S INCLUDED

Counterweight rod
Locking screw

Colour:	silver
Material:	Aluminium

Zubehör

Vixen POLARIE Multi Mounting Block

The Vixen POLARIE Multi Mounting Block was developed to fit Vixen profile dovetail rails, such as the Vixen Dovetail Slide Bar DD, to the Polarie Star Tracker. In this way you can increase the load capacity of the tracker up to 6.5 kg! By releasing the clamping lever on the multiple assembly block, you can move the dovetail freely and clamp it again, making balancing of your camera or telescope rig an easy task. The hole in the middle of the multiple mounting block enables the photographer to carry out the polar alignment without removing the POLARIE polar finder PFL with the dovetail rail DD or the dovetail rail PG. Using one of these combinations, you can easily put deep sky photography into practice with a telephoto lens, or compact telescope. PROPERTIES Allows the inclusion of dovetail rails The Star Tracker can hold up to 6.5 kg in weight Allows the use of telephoto lenses Polar alignment possible without removing the polar finder Weight: 440g WHAT'S INCLUDED POLARIE multiple assembly block Assembly tool

€159.00*

Vixen Dovetail Slide Bar DD for POLARIE Star Tracker Astrophotography Mount

The DD dovetail mount was developed for the POLARIE multi-mounting block to attach camera equipment - from DSLR cameras, to telephoto lenses or even compact telescopes. Using this accessory, the load capacity of the POLARIE Star Tracker is increased to up to 6 kg. To make it easier to find the Pole Star, there is a wide slot in the dovetail for the polar finder. In addition to the regular accessories, two cameras can also be balanced on both sides of the existing photo thread (1/4 inch) with optional ball heads. PROPERTIES Accessories for the POLARIE multi-mounting block Allows you to balance the camera Increases the load capacity of the POLARIE Star Tracker to 6 kg Allows a counterweight to be attached Hole bores 1x 1/4 inch, 1x 1/4 inch external thread, 2xM6 internal thread on the plate WHAT'S INCLUDED Dovetail rail DD

€105.00*

Vixen Quick Release Panorama Plate

Attachment plates, such as the ARCA SWISS are compatible with this quick-release panorama plate. (Note: angle plate is not included in # 35527). The base of the Vixen Quick Release Panorama Clamp can be rotated 360 degrees so that the position of the mounted camera system can be adjusted simply by loosening the clamping lever. In addition to the recommended Vixen dovetail bar DD and top plate, the camera mount is also compatible with other devices with 1/4 ", 3/8" inch screws. The recommended accessory is the X000096 Angle L Bracket for portrait and landscape photography. PROPERTIES Can be rotated 360 degrees ARCA SWISS compatible Weight: 320g WHAT'S INCLUDED Quick-release panorama plate Screws and tools

€105.00*

Vixen PG Dovetail Slide Bar

The dovetail slide bar PG is used to attach a DSLR camera or other instruments with 1/4'' screw to the AP mount. It can be mounted on all the Vixen mount heads with the Vixen style dovetail mounting unit (SX2, SXD2 and PORTA II). The elongated sight slot on the dovetail slide bar PG avoids disturbing the field of view of the polar scope when it is used. FEATURES Width of the dovetail slide bar: Vixen standard (44mm), with a sight slot for polar scope Numbers of 1/4'' screws for attachment: 4 pieces Numbers of M6 screw sockets: 4 pieces Size: 182mm x 44mm x 20mm Weight: 200g WHAT'S INCLUDED 1x dovetail bar

€95.00*

Similar products

Vixen counterweight, 7 kg, for AXD and AXJ mounts

7 kg counterweight for balancing the mount with heavy telescopesSuitable for AXD, AXD2 and AXJ mountsFEATURES Counterweight for AXD/AXJ mounts Weight: 7 kgDELIVERY CONTENT7 kg counterweightClamp screw

€155.00*

EXPLORE SCIENTIFIC Counter Weight 1.0 kg for iEXOS-100 Mount

Additional Counter Weight 1.0 kg for EXPLORE SCIENTIFIC iEXOS-100 PMC-Eight Wifi Goto Mount to balance also larger telescope tubes.FEATURESAdditional counter weightBalance also larger telescope tubesFits to iEXOS-100 MountTotal weight: 1.0kgDiameter: 80mm; height: 30mmBore diameter: 14.7mmSCOPE OF DELIVERYCounter weight 1.0kg (1 pc)

€32.00*

Vixen counterweight 2.8 kg

2.8-kg counterweight for mount counterweight barsUse counterweights to balance your mount. Multiple counterweights may be required depending on the telescope.FEATURESSuitable for SX, SXD, GP2 and GPD2 mountsWeight: 2,800 gPACKAGE CONTENTS2.8-kg counterweight

€62.00*

EXPLORE SCIENTIFIC Truss Dob Counter Weight Set

Counter Weight Set to retrofit all Explore Scientific Dobson Telescopes. Get your telescope perfectly balanced even you are using heavy eyepiece with coma corrector, a binoviewer or big finder scopes. The counter-weight rod has 14,0 mm in diameter. The fixing thread is a metric M10 with hex nut. Delievery content:2 x Counter weight each 1.0kg1 x Counter weight rod 1 x Mounting material

€35.10* €39.00* (10% saved)

Vixen 3.5 kg Counterweight for AXD Equatorial Mount

Vixen 3.5 kg counterweight for AXD, AXD2 and AXJ mountsBalances the mount on heavy telescopes FEATURESCounterweight for AXD mountsWeight: 3.5 kgDELIVERY CONTENT3.5 kg counterweightClamp screw

€129.00*

BRESSER Counterbalance 2.0 kg for EXOS-1 + 2

Additional counterweight to balance heavy accessories etc.FEATUREScolor matched with the Bresser EXOS-1/2 seriessuitable for counterbalance bar with 20mm diameterSCOPE OF DELIVERY1x counterbalance 2.0kg

€29.90*

Vixen Counterweight 1.0kg

For balancing the Polarie Star Tracker in connection with the counterweight bar. The counterweight of 1.0 kg is also compatible with GP, SX mounts and mounts with 20 mm counterweight bar PROPERTIES Suitable for Polarie Star Tracker, GP, SX and AP mount For counterweight rods with a diameter of 20 mm Weight: 1.0 kg WHAT'S INCLUDED Weight: 1.0 kg Locking Bolt

€46.00*

Vixen Counterweight 1.9kg

With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

€52.00*

Vixen counterweight 3.7 kg

The 3.7-kg counterweight can be attached to the counterweight bar to balance your mount. Depending on the telescope, multiple weights may be required. The counterweight is suitable for Vixen SX, SXD, SXP2, GP2, GPD2 and AP mounts.FEATURESSuitable for SX, SXD, SXP2, GP2, GPD2 and AP mountsWeight: 3,700 gPACKAGE CONTENTS3.7-kg counterweight

€73.00*

Vixen Counterweight for APZ Mounts

A counterweight for the APZ Alt-Az mount, designed to balance the mount for stable movement. It is supplied with the APZ Alt-Az mount.FEATURESDimensions: Dia. 78×60 mmWeight 1,65kg

€52.00*

AXD counterweight, 1.5 kg

AXD counterweight, 1.5 kg, for AXD mountsFEATURESAXD counterweight, 1.5 kg, for AXD and AXJ mountsFor balancing the mountWeight: 1.5 kgDELIVERY CONTENT1.5 kg counterweightClamp screw

€68.00*

Vixen AP Conterweight Bar

Counterweight bar, which is delivered with the AP-mount and AP-SM mount. It is designed for balancing an optical tube after being secured with a counterweight and installed on the declination body. It can used with the APZ Alt-Az mount.FEATURES Diameter of bar: Diameter: Dia. 20 mm Dimensions: 78×328 mm Effective bar length: 269 mm Weight: 820 g Compatible counterweights: 1 kg, 1.9 kg, 2.8 kg, 3.7 kg

€55.00*