BRESSER Slider Binocular Mount without Tripod

Revolutionary design for unprecedented comfort in binocular viewing - at day and night; enables steady images and fatigue-free viewing

  • Slider binocular mount without tripod
  • Enables comfortable and fatigue-free binocular observation
  • Suitable for landscape and sky observation
  • Shake-free and steady images at day and night
  • Almost infinitely rotatable and swivelling cardanic mount head
  • Supports binoculars and telescopes up to 3.5 kg weight
  • Various observer positions are possible: standing, sitting and lying down
  • Also a practical alternative to a photo tripod for wheelchair users
  • Adjustable viewing height from approximately 30 cm to 170 cm
  • Precise small series production - manufactured in the EU (Hungary)

€640.00*

% €799.00* (19.9% saved)

Available, delivery time: 1-3 days

Product number: 4964180
GTIN/EAN: 4007922073941
Product information "BRESSER Slider Binocular Mount without Tripod"
The BRESSER Slider Binocular Mount, with its revolutionary design, offers unprecedented comfort for binocular observation - during the day and at night
Thanks to the variable extension length of the two support rails (crossbars), the cardanic mount head and various adjustable slip couplings almost all binocular positions can be selected easily. Afterwards, the binoculars remain in their respective position thanks to the counterweights. During observation, it is usually not necessary to touch the binoculars. Whether you want to observe standing up, sitting on a swivel chair or lying down on a mat or bed, everything is possible. For wheelchair users the mount is also an interesting alternative to normal tripod solutions, where usually one tripod leg is always in the way.

A steady image despite large binoculars and high magnification
Especially when observing for a long time, even medium-weight binoculars weighing 500 grams or more and moderate magnifications of 10x or more make life difficult. Already after a short while the pictures blur and the arms get tired. Certainly, a high photo tripod can bring a significant improvement. But this solution is very limited in terms of the binoculars’ movability and the position of the observer.
The BRESSER Slider Binocular Mount offers far more possibilities. Almost all desired binocular positions can be reached effortlessly. The patented design, with 2 counter-moving support rails (crossbars), is guided on special linear roller bearings inside the mount head with zero play. This allows the observer to vary the extension length as desired with little muscle power. The sliding resistance can be infinitely adjusted using 2 adjusting screws. In the middle of the slider mount’s centre of gravity, there is an axle with adjustable slipping clutch for the tilting and rotating movement. All bearings operate with absolute precision and backlash-free. For quick levelling, there is even a 30 mm fluorescent circular bubble in the base of the mount, which is easy to read even in the dark.

Cardanic mount head
The cardanic mount head works like a ball head. However, it offers a significantly higher load-capacity and more stability. Here, too, the sliding resistance of all moving parts can be adjusted to the user’s specific needs. The mount head offers several mounting holes for mounting a binocular holder via 1/4-inch photo screw or a standard GP prism clamp for mounting small telescopes. In addition, there are various holes on the side cheeks of the mount head for further accessories such as red light reading lamps, smartphone holders for the use of sky apps or LED viewfinders for quick sighting of celestial objects.

Counterweights
Several counterweights enable the exact balancing of the binoculars or telescope. Two counterweights of each 2.5 kg, 1.25 kg and 0.5 kg are included in the package and can be attached to the rear end of the mount on the mounting bolts on both sides. With the 2 included spring clamps the weights are secured on the bolts. Instead of the counterweights, a filled sandbag can also be attached to the existing mounting hook. This reduces the transport weight for planned excursions.

Suitable for use with binoculars of up to 3.5 kg weight
The BRESSER Slider Mount can be used with binoculars of up to 3.5 kg weight. But it is also a real help for obtaining blur-free images with much smaller binoculars during long-term observations. It is mounted with an optionally available binocular tripod adapter, which is attached to the mount head with a 1/4-inch photo thread screw.

Also highly recommended for compact refractor telescopes
Install an optionally available standard GP prism adapter on the mount head and use your travel telescope in a completely different way: as a high-quality spotting scope for landscape and sky observation.

Tripod adapter
The matching tripod adapter for using the optionally available BRESSER stainless steel Tripod ST-3 (item no.: 0114310) is already included in the slider mount’s scope of delivery. It converts the standard large 3/8-inch photo tripod thread (internal thread) in the base of the slider mount into a metric M10 thread. This means that after removing the adapter, a stable standard photo or video tripod with 3/8-inch mounting screw can also be used.

GETTING STARTED VIDEO:  https://www.youtube.com/watch?v=AhJm3Cl1e9I


FEATURES

  • BRESSER Slider Binocular Mount without Tripod
  • Enables comfortable and fatigue-free binocular observation
  • Suitable for landscape and sky observation
  • Shake-free and steady images at day and night
  • Almost infinitely rotatable and swivelling cardanic mount head
  • Supports binoculars and telescopes up to 3.5 kg weight
  • Various observer positions are possible: standing, sitting and lying down
  • Also a practical alternative to a photo tripod for wheelchair users
  • Adjustable viewing height from approx. 30 cm to 170 cm (when using the BRESSER tripod, item no. 0114310)
  • Dimensions when fully assembled: 125 x 35 x 180 cm (when using the BRESSER tripod, item no. 0114310)
  • Total weight mount head incl. accessories: 14.5 kg
  • Weight of mount head: 6 kg 
  • Large 30 mm fluorescent circular bubble in the mounting base
  • Mounting holes for further optional accessories available
  • Several balance weights include: 2x 2.5 kg, 2x 1.25 kg, 2x 0.5 kg
  • Adjustable friction clutches on all movable axes
  • All surfaces high quality painted, powder coated or anodised
  • Precise small series production - manufactured in the EU (Hungary)


SCOPE OF DELIVERY

  • Slider mount (binoculars + tripod not included)
  • Tripod adapter 3/8 inch to M10 thread
  • Balance weight 2.5 kg (2 pieces)
  • Balance weight 1.25 kg (2 pieces)
  • Balance weight 0.5 kg (2 pieces)
  • Locking device for counterweights (2 pieces)
Colour: black
Material: Aluminium, Steel

Zubehör

%
BRESSER Field Tripod ST-3 stainless steel
The BRESSER Field Tripod ST-3 is a solid and height-adjustable tripod with double tripod leg clamp and made of corrosion-resistant stainless steel. It is suitable for direct usage with the BRESSER Slider Binocular Mount. Adjust the extendable stainless steel tripod to the desired base height and thereby pre-select your favourite observation position. For example, for landscape observation while standing or sitting, the full tripod height should be used. For night sky observation, a lower setting is recommended to ensure a comfortable viewing position while sitting or lying down. The tripod is equipped with a standard GP mounting head and a central screw with metric M10 threaded shaft. It is also suitable for EXOS-1 and EXOS-2 EQ mounts. The upper tripod leg tubes have a diameter of 50.8 mm (2 inches).FEATURESFor usage with BRESSER Slider Binocular Mount Standard GP mount head Also suitable for EXOS-1 and EXOS-2 EQ mounts Solid stainless steel and aluminium structure Double tripod leg clamp Height adjustable approximately from 68 to 110 cm Tripod weight: 5.5 kg Transport length approximately 87 cmUpper tripod leg tubes have a diameter of 50.8 mm (2 inches)SCOPE OF DELIVERYTripod Accessory tray Central spindle

€122.00* €199.00* (38.69% saved)
%
BRESSER Binocular Tripod Adapter Deluxe, sturdy metal version
Sturdy metal tripod adapter for binoculars up to 3kg net weight. High-quality connecting element between tripod head and binocular bridge with a very stiff design.FEATURESTripod adapter Deluxe made of metalSuitable for almost all binoculars up to 3kg weightConnection element between tripod head and binocular bridgeVery elegant and rigid designTripod connection thread standard 1/4 inch photo threadBinocular connection thread standard 1/4 inch photo threadRubber-coated tripod support for non-slip fitLarge rubber-coated fixing screw for binocular bridgeOverall length: 100mm, weight: 100g, colour: blackSCOPE OF DELIVERYTripod Adapter Deluxe (1pc)

€17.90* €19.90* (10.05% saved)
Vixen mounting base for finder scope
​Vixen finder shoe for attaching a Vixen-profile finder bracket to your telescope (also works with many other finder brackets).PROPERTIESVixen standard connectionFixing with two screwsWHAT'S INCLUDEDVixen finder shoeFastening screws

€15.90*
Vixen XY Red Dot Finder Scope II
Red dot finder for astronomical telescopes. This finder scope provides an easy way to align your telescope with objects in the night sky.The brightness of the dot can be adjusted via a dial.Designed for the Vixen viewfinder shoe FEATURES Weight: 185 g / 6.53 oz Battery: CR2032 Magnification: 1x 1/4" screw hole, adjustable red pointDELIVERY CONTENTLED red dot finderCR2032 battery

€82.00*
BRESSER Dovetail clamp Messier/ES/GP/Vixen
Universal dovetail clamp suitable for all optical tubes which are equipped with a standard 44mm dovetail rail (Messier/ES/GP/Vixen).  Also a screw kit is included for mounting the dovetail clamp direct on the top of the handle of all BRESSER Messier und EXPLORE-SCIENTIFIC telescopes. Thus a parallel mounted guiding telescope can be set up very easy and enables long exposure astrophotagraphy with autoguiding.  The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 additional 1/4" photo tapped holes at 120 degrees angular distance on a pitch circle diameter of 55 mm to allow a versatile adaptation to a variety of other telescopes and adapter plates.FEATURESUniversal dovetail clamp  Suitable for 44mm dovetail rail of Messier/ES/GP/Vixen  Screw set for Messier/ES handle included For piggy-back mounting of a guiding telescope Enables astrophotography with autoguiding CNC machined Aluminum Additional 1/4" photo thread holes available SCOPE OF DELIVERY Dovetail clamp Screw set (2pcs M6x25mm)

€45.00*
BRESSER Spezial Astro SF 20x80 ED Binoculars
SPEZIAL ASTRO binoculars from BRESSER are ideal for astronomy and landscape observation. This is a professional large binocular with ED glass objective lenses for the very highest demands on color fidelity and brilliance. With the best viewing characteristics, a robust marine version and a sturdy tripod adapter. Thanks to fully multi coated Bak-4 glass material, the extra large objective lens diameter and highly corrected eyepieces with 5 lenses in 3 groups these binoculars provide bright, crisp images from edge to edge. The high 20x magnification it is convenient not only for observing astronomical objects but is also practical for viewing distant terrestrial objects. Due to a very high reduction of stray light, the binoculars deliver the best possible picture and a perfect sight. With the individual eyepiece focus once set you can get a sharp image for all astronomical distances. Foldable rubber eyecups give eye glass wearers the possibility of making the best use of these optics’ field of view. The binoculars are waterproof and ARGON gas filled to avoid internal fogging. The ergonomic rubber armouring provides a good grip and is also protected against shocks. With the included heavy duty foto tripod adapter the SPEZIAL ASTRO ED can be mounted onto any foto tripod which offers a standard 1/4inch or 3/8inch thread. The use of a tripod is also highly recommended at a high magnification of 20x to obtain a steady image. FEATURES Binoculars for astronomical and landscape observations Extremly high light gathering capacity  High magnification for for distant objects Fully multi coated optics Waterproof and ARGON gas filled against fogging Magnification: 15x / objective lens diameter: 70mm Individual eyepiece focus and foldable rubber eyecups Highly corrected eyepieces for crisp images from edge to edge Ergonomic rubber armouring - protected against shocks Dimensions: 310x250x100mm / weight: 2700g Heavy duty foto tripod adapter included SCOPE OF DELIVERY Binocular Photo tripod adapter Neckstrap Dust covers CaseInstruction manual

€939.00*
BRESSER Spezial Astro SF 15x70 Binoculars
SPEZIAL ASTRO SF 15x70 binoculars from BRESSER are ideal for astronomy and landscape observation. Thanks to fully multi coated Bak-4 glass material, the extra large objective 70mm lens diameter and highly corrected eyepieces with 5 lenses in 3 groups, these binoculars provide bright, crisp images from edge to edge of their field of view. The high 15x magnification is convenient not only for observing astronomical objects but is also practical for viewing distant terrestrial objects. Due to a very high reduction of stray light, the binoculars deliver the best possible picture and excellent clarity. With the individual eyepiece focus set you can get a sharp image for all astronomical distances, with no "focus creep" to spoil the view . Foldable rubber eyecups give eye glass wearers the possibility of making the best use of these binoculars wide field of view. Large diameter ocular eyepiece lenses provide extremely comfortable viewing, making longer observations possible without eye fatigue.The binoculars are waterproof and ARGON gas filled to avoid internal fogging. The ergonomic rubber armouring provides a good grip and is also protected against shocks, making them rugged and ideal for transportation. With the tripod thread in the lengthened centre axis, the SPEZIAL ASTRO can be mounted onto any photographic tripod. For tripod use the tripod adapter (part No. 4914925) is icluded. The use of a tripod is highly recommended, as hand holding at the high magnification of 15x makes it difficult to obtain a steady image. FEATURES binoculars for astronomical and landscape observations extremely high light gathering capacity  high magnification for for distant objects fully multi coated optics waterproof and ARGON gas filled against fogging magnification: 15x / objective lens diameter: 70mm individual eyepiece focus and foldable rubber eyecups highly corrected eyepieces for crisp images from edge to edge ergonomic rubber armouring - ruggedly protected against shocks dimensions: 290x215x85mm / weight: 1900g tripod thread availabletripod adapter included SCOPE OF DELIVERY binoculars neckstraptripod adapter dust covers caseinstruction manual

€315.00*
BRESSER Spezial Astro 25x70 Binoculars
SPEZIAL ASTRO binoculars from BRESSER are ideal for astronomy and landscape observation. Thanks to fully multi coated Bak-4 glass material and the extra large objective lens diameter, these binoculars provide bright and high resolution images.The high 25x magnification it is convenient not only for observing astronomical objects, but is also practical for viewing distant terrestrial objects too. Due to a very high reduction of stray light, by multi coating all air to glass surfaces, the binoculars deliver the best possible performance and excellent contrast.Diopter compensation and foldable rubber eyecups give eye glass wearers the possibility of making the best use of these optics’ field of view. With the tripod thread in the lengthened centre axis, the SPEZIAL ASTRO can be mounted onto any photographic tripod. For tripod use you need the optional available tripod adapter (part No. 4914925). The use of a tripod is highly recommended with these binoculars, as at the high magnification of 25x it's difficult to maintain a steady image by hand holding (though this is possible for short periods).FEATURESBinoculars for astronomical and long distance observationsExtremely high light gathering capacity High magnification for distant objectsMagnification: 25x / objective lens diameter: 70mmFully multi coated / tripod thread availableDimensions: 275x205x82mm / weight: 1300gTripod thread availableWHAT'S INCLUDEDBinocularNeckstrapDust coversCaseInstruction manual

€125.00*
%
BRESSER Spezial-Astro 20x80 Porro Binoculars
Thanks to fully multi coated Bak-4 glass material and the extra large objective lens diameter the BRESSER Spezial-Astro 20x80 Porro Binoculars provide bright, crisp images from edge to edge. Their high 20x magnification makes these excellent binoculars convenient not only for observing astronomical objects, but are also practical for viewing distant terrestrial targets and nature study. Their optical design and coatings minimise stray light and ghosting (even near brighter objects like the Moon), which would otherwise disrupt and detract from observing enjoyment.Diopter compensation and foldable rubber eyecups give wearers of glasses the possibility of making the best use of these binocular's wide field of view. With the tripod thread integrated in the strong central support column, which is adjustable along the centre axis bar, the BRESSER Spezial-Astro 20x80 Porro Binoculars can directly be mounted onto any suitable camera-style tripod and balanced front to back, once in place.FEATURESBinoculars for astronomical and long distance observationsExtremely high light gathering capacityCan directly be mounted onto tripods with standard 1/4" attachmentsWHAT'S INCLUDEDBinocularsCarry case

€129.90* €159.90* (18.76% saved)
%
BRESSER Astro & Marine SF 7x50 WP binoculars
The ASTRO & MARINE binoculars from BRESSER are ideal for astronomy and maritime use, e.g. sailing and water sports enthusiasts. Robust and weatherproof per IPX6 levelThanks to their ergonomic rubber armouring, these binoculars fit securely in the hand and are also well protected against shocks and bumps. The binoculars are waterproof and filled with nitrogen. This effectively prevents fogging of the lenses, even in unfavourable weather conditions. Lightweight with tripod connection threadThe robust, yet very light construction is made possible by the most modern magnesium housing construction. Magnesium is around 35% lighter than aluminium. Due to the moderate 7x magnification and the low weight, these 7x50s are also very well suited for hands-free use. Nevertheless, there is a tripod connection thread on the centre axis. This means that the ASTRO & MARINE model can also be mounted securely on a photo tripod using the tripod adapter (Art.4914925) which is included as part of the package. Although this is not absolutely necessary with a magnification of 7x, it is highly recommended, especially for long-time astronomical observations, in order to obtain an absolutely steady image. Eyepieces for comfortable viewingThe precise single eyepiece focusing (SF) makes it possible to focus the binoculars once and then clearly observe all resolvable objects in the night sky, or on the horizon. In addition, this design prevents accidental change of focus. Foldable rubber eyecups and eyepieces with a comfortable eye relief distance (WP) of 20mm also allow those who have to wear glasses to observe, to use the entire field of view. High quality opticsThanks to fully multi-coated Bak4 optics, large 50mm objective lens diameter and the well-corrected eyepieces with 3 lenses in 2 groups, these excellent binoculars produce sharp and brilliant images. The maximum reduction of stray light achieved by internal baffles and housing/edge blackening, results in the best possible optical image and perfect contrast, even in difficult light conditions and especially at night.FEATURESBinoculars for astronomy, landscape observation and water sportsWaterproof per IPX6 level and filled with nitrogen to prevent lens foggingAlso for use in unfavourable weather conditionsExtremely high light gathering optics, making them ideal for night-time observationModerate magnification for a steady image, even when hand-holdingMagnification: 7x / Lens diameter: 50mmSingle eyepiece focus (SF) and foldable rubber eyecups, also suitable for spectacle-wearersWide pupil distance (WP) of 20mm for comfortable viewingWell corrected eyepieces for ultimate image sharpness and pinpoint star imagesModern multi-layer coatings on all lens surfaces for high light transmissionErgonomic rubber armouring - very good grip and protects against shocks and bumpsRobust construction, yet still lightweight due to magnesium housingDimensions: 198 x 202 x 66 mm / Weight: 1130 grams / Colour: blackTripod connection thread 1/4 inch available on the binocular bridgeMetal photo tripod adapter already included in deliveryWHAT'S INCLUDED Binoculars Carrying strap Dust caps Nylon travel bag Photo tripod adapter (Art. 4914925) Instruction manual

€133.00* €239.00* (44.35% saved)
%
BRESSER Astro & Marine SF 10x50 WP binoculars
The ASTRO & MARINE binoculars from BRESSER are ideal for astronomy and maritime use, e.g. sailing and water sports enthusiasts. Robust and weatherproof per IPX6 levelThanks to their ergonomic rubber armouring, these binoculars fit securely in the hand and are also well protected against shocks and bumps. The binoculars are waterproof and filled with nitrogen. This effectively prevents fogging of the lenses, even in unfavourable weather conditions. Lightweight with tripod connection threadThe robust, yet very light construction is made possible by the most modern magnesium housing construction. Magnesium is around 35% lighter than aluminium. Due to the moderate 10x magnification and the low weight, these 10x50s are also very well suited for hands-free use. Nevertheless, there is a tripod connection thread on the centre axis. This means that the ASTRO & MARINE model can also be mounted securely on a photo tripod using the tripod adapter (Art.4914925) which is included as part of the package. Although this is not absolutely necessary with a magnification of 10x, it is highly recommended, especially for long-time astronomical observations, in order to obtain an absolutely steady image. Eyepieces for comfortable viewingThe precise single eyepiece focusing (SF) makes it possible to focus the binoculars once and then clearly observe all resolvable objects in the night sky, or on the horizon. In addition, this design prevents accidental change of focus. Foldable rubber eyecups and eyepieces with a comfortable eye relief distance (WP) of 20mm also allow those who have to wear glasses to observe, to use the entire field of view. High quality opticsThanks to fully multi-coated Bak4 optics, large 50mm objective lens diameter and the well-corrected eyepieces with 5 lenses in 3 groups, these excellent binoculars produce sharp and brilliant images. The maximum reduction of stray light achieved by internal baffles and housing/edge blackening, results in the best possible optical image and perfect contrast, even in difficult light conditions and especially at night.FEATURESBinoculars for astronomy, landscape observation and water sportsWaterproof per IPX6 level and filled with nitrogen to prevent lens foggingAlso for use in unfavourable weather conditionsExtremely high light gathering optics, making them ideal for night-time observationModerate magnification for a steady image, even when hand-holdingMagnification: 10x / Lens diameter: 50mmSingle eyepiece focus (SF) and foldable rubber eyecups, also suitable for spectacle-wearersWide pupil distance (WP) of 20mm for comfortable viewingWell corrected eyepieces for ultimate image sharpness and pinpoint star imagesModern multi-layer coatings on all lens surfaces for high light transmissionErgonomic rubber armouring - very good grip and protects against shocks and bumpsRobust construction, yet still lightweight due to magnesium housingDimensions: 191 x 202 x 66 mm / Weight: 1165 grams / Colour: blackTripod connection thread 1/4 inch available on the binocular bridgeMetal photo tripod adapter already included in deliveryWHAT'S INCLUDED Binoculars Carrying strap Dust caps Nylon travel bag Photo tripod adapter (Art. 4914925) Instruction manual

€137.00* €239.00* (42.68% saved)
%
EXPLORE SCIENTIFIC G400 15x56 Roof Prism Binocular with Phase Coating
Ideal for quick stargazing: with the EXPLORE SCIENTIFIC G400 15x56 binoculars, you can enjoy a panoramic view of the sky on a starry night. With a magnification of 15x and a field of view of 74,3 m at 1,000 m, you can look forward to fascinating impressions of large-scale objects such as constellations or the Milky Way. But also during the day on trips, hikes or at sporting events, the all-rounder will quickly become an indispensable companion for exciting observations. The 56 mm lens diameter lets plenty of light reach your eyes. High-quality coatings on the prisms and lenses further increase light transmission - for bright images even in unfavourable light conditions. For steady observations, simply attach the binoculars to a tripod using the built-in tripod connection thread. Prisms with phase and dielectric coating Look forward to high-contrast and high-resolution images while observing through the binoculars. For this purpose, the roof prisms have been enhanced with an excellent phase coating. The special dielectric coating, meanwhile, improves the light transmission and thus the image brightness. Excellent BaK-4 glass material The G400 binoculars by EXPLORE SCIENTIFIC are made of high-quality BaK-4 glass material. As a result, you can always view your objects of observation in brilliant images. In addition, the full multi-coating on the lenses lets even more light through and reduces interfering reflections. Suitable for people wearing glasses The binoculars allow you to see the entire field of view with or without glasses. For this purpose, you turn the twist-up eyecups in or out to optimize the distance between the eyes and the eyepiece lenses. With the dioptric compensation of +/- 3, you can also compensate for a difference in the visual acuity of the two eyes. Weatherproof body When out in nature, you should always be prepared for wind and weather. That's why the G400 binoculars are equipped with a waterproof body that won't let liquid penetrate. And when temperatures fluctuate, the nitrogen filling ensures that the lenses do not fog up from the inside. Get your all-rounder for stargazing, wildlife observation and more - with the EXPLORE SCIENTIFIC G400 15x56 binoculars. EIGENSCHAFTEN Roof prism binoculars for astronomy, travel and nature observation Prisms made of BaK-4 glass material Prism coating: Phase and dielectric coating Lens coating: Full multi-coating Centre drive focusing Diopter compensation: +/- 3 Nitrogen filling LIEFERUMFANG Binoculars Carrying strap Bag Cloth Instruction manual

€314.10* €349.00* (10% saved)
%
EXPLORE SCIENTIFIC G400 10x50 Roof Prism Binocular with Phase Coating
Ideal for quick stargazing: with the EXPLORE SCIENTIFIC G400 10x50 binoculars, you can enjoy a panoramic view of the sky on a starry night. With a magnification of 10x and a field of view of 108 m at 1,000 m, you can look forward to fascinating impressions of large-scale objects such as constellations or the Milky Way. But also during the day on trips, hikes or at sporting events, the all-rounder will quickly become an indispensable companion for exciting observations. The 50 mm lens diameter lets plenty of light reach your eyes. High-quality coatings on the prisms and lenses further increase light transmission - for bright images even in unfavourable light conditions. For steady observations, simply attach the binoculars to a tripod using the built-in tripod connection thread. Prisms with phase and dielectric coating Look forward to high-contrast and high-resolution images while observing through the binoculars. For this purpose, the roof prisms have been enhanced with an excellent phase coating. The special dielectric coating, meanwhile, improves the light transmission and thus the image brightness. Excellent BaK-4 glass material The G400 binoculars by EXPLORE SCIENTIFIC are made of high-quality BaK-4 glass material. As a result, you can always view your objects of observation in brilliant images. In addition, the full multi-coating on the lenses lets even more light through and reduces interfering reflections. Suitable for people wearing glasses The binoculars allow you to see the entire field of view with or without glasses. For this purpose, you turn the twist-up eyecups in or out to optimize the distance between the eyes and the eyepiece lenses. With the dioptric compensation of +/- 3, you can also compensate for a difference in the visual acuity of the two eyes. Weatherproof body When out in nature, you should always be prepared for wind and weather. That's why the G400 binoculars are equipped with a waterproof body that won't let liquid penetrate. And when temperatures fluctuate, the nitrogen filling ensures that the lenses do not fog up from the inside. Get your all-rounder for stargazing, wildlife observation and more - with the EXPLORE SCIENTIFIC G400 10x50 binoculars. EIGENSCHAFTEN Roof prism binoculars for astronomy, travel and nature observation Prisms made of BaK-4 glass material Prism coating: Phase and dielectric coating Lens coating: Full multi-coating Centre drive focusing Diopter compensation: +/- 3 Nitrogen filling LIEFERUMFANG Binoculars Carrying strap Bag Cloth Instruction manual

€199.00* €299.00* (33.44% saved)
OCULUM VERLAG - Hobby-Astronom in 4 Schritten (German edition)
Please note that this astronomy book for beginners is only available in German language.

€14.90*
OCULUM VERLAG - Fernrohr-Führerschein in 4 Schritten (GERMAN)
Please note that this astronomy book for beginners is only available in German.

€19.90*

Similar products

%
BRESSER Computer Cable for Remote Control of MCX Goto Telescopes and EXOS-II EQ Goto Mounts
For remote control of a BRESSER MCX 102/127 Goto Telescope or a BRESSER EXOS-II EQ Goto Mount via computer cable. Navigate your telescope comfortably with navigation software and Windows 10 computer. One click on the star map on the computer and the telescope is positioned on the desired object. NOTES(This list is exemplary and not exhaustive)To control a BRESSER MCX Goto telescope, no software update of the Computer Handbox is required. A direct use is therefore possible. To control a BRESSER EXOS-II EQ Goto mount, the Computer Handbox must be updated to software version v2.3 with the help of this computer cable set. This cable set is not suitable for the EXPLORE SCIENTIFIC EXOS-2 with PMC-Eight Goto. This set does not include navigation software and computer. DOWNLOAD NAVIGATION SOFTWARE (alternatively)Sky Map Pro Demo: https://nextcloud.bresser.de/s/PnQr9gyigxp9A6zSky Map Pro ASCOM PLUG-in: http://download.ascom-standards.org/plugins/SkyMapProPlugin.zip Carte Du Ciel: https://www.ap-i.net/skychart//en/startStellarium: https://stellarium.org/de FEATURESConnects a BRESSER MCX102/127 Goto to a PC Connects a BRESSER EXOS-II Goto to a PC Comfortable control by computer USB to serial adapter included Required firmware update for EXOS-II included Compatible with WIN 10 + 11SCOPE OF DELIVERYRS-232 computer cable USB 2.0 to RS-232 adapter + driver CD-Rom Firmware v2.3 for EXOS-II Goto Handbox Flash Utility Software for Handbox Update ASCOM driver for BRESSER MCX/EXOS-II Goto Operating instructions

€40.50* €45.00* (10% saved)
BRESSER Mobile Solar Charger 21 Watt with USB and DC output
Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070.Universal charger with flexible connection optionsOne USB-A connection socket is available for powering your devices. There is also an additional universal connection socket for DC bar plugs with a diameter of 5.5/2.1 mm. A universal connection cable with a 5.5/2.1mm DC bar plug on both sides and a length of 2 metres, as well as 3 plug adapters (3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 2400mA (2.4 amps). So 3000 : 2400 x 75 = 94 minutes. Dividing the result by 60 gives the charging time in hours: 1.6 hours.This means that an average smartphone can be fully charged in just about 1.6 hours with a 21-watt solar panel. Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. If you attach it to your backpack, you can even use the time during a hike for charging. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 21 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via USB A and DC hollow plug with adaptersMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 21 wattsOutput voltage at the DC socket: 18 voltsOutput current at the DC socket: max. 1.1 ampsOutput voltage at the USB A socket: 5 voltsOutput current at the USB A socket: max. 2.4 ampsCable length of the DC connection cable: 2.0 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 290 x 195 x 35 mmDimensions when unfolded: 815 x 290 x 20 mmWeight: 1,0 kgSCOPE OF DELIVERYSolar panel 21 Watt (1 piece)Carabiner hook (2 pieces)DC connection cable (1 piece)Plug adapter (3 pieces)User manual

€59.00*
%
BRESSER Portable Power Supply 100 Watt
Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with a solar panel (available as an option). Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.FEATURESPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputInstruction manual

€161.09* €169.00* (4.68% saved)
Vixen SXG-HAL130 Aluminum Tripod for GP, SX & AP Mounts
High-quality, stable aluminium tripod for a variety of mounts with 45 mm connections. The aluminium profile ensures firm positioning with a minimum amount of vibration. Suitable for GP2, GPD2, AP, SX, SXP, SXP2 and AXJ mounts or similar with 45 mm connections. FEATURES Robust aluminium tripod without mount Suitable for: GP-, SX- & AP mounts Height-adjustable: 81 - 130 cm Weight: 5.5 kg WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

€276.00*
%
Vixen Wifi Adapter for EQ Mounts
The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can perform celestial navigation without any wiring. The app turns your smartphone or tablet into a controller for the equatorial mount in no time. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired ones. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are available.Convenient operation When looking through the telescope operate the mount by swiping on the app's star map. Since there are no buttons, simply slide your finger over the star chart for convenient operation of the mount. Extensive astronomical data includedThis includes data on easily observable celestial bodies such as Messier objects, NGC objects, IC objects as well as the Sun, Moon, planets, comets and dwarf planets. High-precision alignment By aligning to one or two stars, you already get a fairly accurate positioning of the mount. By aligning to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects will then be approached precisely and centrally in your telescope's field of view. The alignment information is stored and can be retained even when the telescope is switched off. By leaving the telescope in its current state without moving it after completing an observation, the next time you observe you can start the automatic setup with the same settings for the next observation. Individual setting options As with the STAR BOOK TEN controller, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the lens tube inversion (meridian flip) as desired. Even if the object moves south during tracking, you can prevent the telescope tube from inverting. Important information: Cannot be used on old SX mounts with the old blue Star Book. FEATURES Can be used on: SX2, SXD2, SXD2-PFL, SXP, SXP-PFL, SXP2, AXJ (without encoder), AXD, AX Not compatible with old SX mounts with blue Star Book CPU: 32bit CISC processor 120MH Connector: D-SUB 9-PIN socket Autoguider connector: 6-pin modular connector for SBIG Operation: Android 6, iOS 9.0 or higher Wifi standard: IEEE802.11b/g Data encryption: WPA2-APK Firmware update: via WiFi connection Operating voltage: DC12V 0,1A (max) Power supply: via mount Dimensions: 56 x 36 x 19.5 mm, weight: 60 g SCOPE OF DELIVERY Vixen Wifi adapter

€269.10* €299.00* (10% saved)
Vixen SXD2WL Equatorial GoTo Mount with Wifi
Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins. An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 15 kg, the axis cross of the mount weighs just 9.2 kg making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SXD2 mount in detail Precision stepper motors and micro-step motion control system At the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gears High-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweight The solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. Built-in PFL-II polar finder with illumination The built-in 5x20mm polar finder with 10° field of view has a 3-star alignment system. This eliminates the inconvenience of setting the date and original time. The illuminated reticle with variable brightness and automatic switch-off is adjustable in 8 levels and illuminated in red. The adjustment accuracy is 3 arc minutes. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller. The STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Polar finder scope: 6x20 mm, PFL-II polar finder Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweight: 1x 1.9 kg and 1x 3.7 kg Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL EQ mount Wireless unit 2 counterweights: 1.9 kg and 3.7 kg Mounting tools Pole finder PFL-II Cigarette lighter cable

€2,799.00*
BRESSER EQ-3 Telescope Mount incl. Tripod, black
​The BRESSER EQ-3 is a German equatorial telescope mount that can be used universally for light to medium-weight telescope tubes with a net weight of up to 5 kg.The only requirement for telescope tube mounting is a universal Vixen profile GP dovetail mounting bar - found on many commercially available telescope. This high-quality equatorial mount allows easy alignment to the celestial pole in no time and then allows tracking of all celestial objects manually with its single RA axis. Both RA and DEC axes come with manual slow motion control cables, for easy adjustment of your telescope's pointing.  Also included is a sturdy, yet lightweight, aluminium field tripod, which can be individually adjusted in leg height to give you perfect stability, even on rough ground. The included 1.5 kg counterweight is used to adjust the balance between the telescope tube and the mount.  Further counterweights can be supplied if needed. NOTE: If you want automatic Right Ascension tracking of celestial targets, this telescope mount can be equipped with the optional motor set Art. 4951400.FEATURESGerman equatorial telescope mountFor light to medium-weight telescope tubes of up to 5 kg net weightUniversal Vixen GP-style dovetail holderEasy polar alignment with adjustable altitude and azimuth axesAllows convenient tracking by slow motion right ascension axisWhat's IncludedBRESSER EQ-3 mountField tripodCounterweight 

€139.00*
Vixen SX dovetail adapter
The Vixen SX dovetail adapter is used to attach a telescope to a mount. Tube clamps are also required for this and are connected to the dovetail adapter. Suitable for use on GP and SX mounts, as well as various other mounts with a Vixen standard dovetail mount.FEATURESFor attaching telescopes to mounts with Vixen connectionSuitable for all SX, Porta and GP mountsWeight: 160 gPACKAGE CONTENTSVixen SX dovetail adapterScrew setAllen key

€19.90*
Vixen rigid Accessory Tray for HAL130 and Porta II Tripods
The Vixen rigid Accessory Tray for HAL130 and Porta II Tripods offers practical storage space for eyepieces and various accessories.It also improves the overall stability of the tripod.The tray can be used on the HAL130 and SXG HAL 130 for GP and SX, as well as on the Porta II tripod.PROPERTIESFor eyepieces and various accessoriesIncreases the stability of the tripodsCan be used on HAL130, SXG HAL 130 and Porta tripodsWHAT'S INCLUDEDTray for tripodsScrew set 

€29.00*
BRESSER StarTracker Astronomical Photo Mount PM-100
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual

€349.00*
EXPLORE SCIENTIFIC Twilight I telescope mount with tripod
The Twilight I is a light-to-medium-duty alt-azimuth mount and tripod designed to quickly and easily accept small to medium sized refractors, such as the AR102 + AR127s or ED102mm + ED127, and of course, the ED80mm. Lightweight, fast Newtonians will also match up nicely with the Explore Scientific Twilight I mount. As long as your telescope does not exceed 18 pounds and has a Vixen-Style Universal Dovetail bar for mounting the telescope to the mount head, you are good to go. The Twilight I alt-azimuth mount head is made of powder-coated aluminum and there are worm gears on both axes. The adjustable angle head can be tilted forward or back at a 45° angle to allow more clearance for your telescope so you can point it straight up for viewing at the zenith. The Allen hex wrench for doing the mount head adjustment can be safely stored at the integrated magnetic holder.  Slow-motion control cables are attached on the vertical and horizontal axes, and are easy to turn during the night, even with gloves on, due to the over-sized knurled knobs that are attached to the end of each cable. They can be attached to either side of each axis to accommodate right or left-handed users, or different types of telescopes (e.g. refractors vs. Newtonian reflectors) for ease of adjustment. The stainless steel tripod that comes standard with the Twilight I mount has adjustable legs and a wide foot print of 42 inches, which makes the tripod more stable. A spreader bar locks against the inside of the legs to secure the tripod even further, and keep vibrations to a minimum. SCOPE OF DELIVERTwilight I Telescope MountStainless Steel Field tripod

€299.00*
BRESSER Mobile Solar Charger 120 Watt with USB and DC output
Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. It is also suitable for charging large power stations such as the BRESSER Power Station 100 Watt (art. no.3810000) and the BRESSER Power Station 500 Watt (art. no. 3810020) as well as power stations from other manufacturers with suitable connection values.Universal charger with flexible connection optionsThere is one USB-C connection socket and another orange USB-A connection socket with QC3.0 standard for powering your devices and also for fast charging of newer generations of devices. An additional universal connection cable with a hollow DC plug 5.5/2.1 mm in diameter and 2.5 metres long, as well as 3 plug adapters (3.5/1.35 mm, 5.5/2.5 mm, 8.0/5.5/0.8 mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example 1: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 3400mA (3.4 amps). So 3000 : 3400 x 75 = 66 minutes. Dividing the result by 60 gives the charging time in hours: 1.1 hours.This means that an average smartphone can be fully charged in just about 1.1 hours with a 120-watt solar panel.   Example 2: A large power station battery with a capacity of 13000mAh (13.0 Ah) and a charging current via 18 volts DC plug connection of 6600mA (6.6 amps). So 13000 : 6600 x 75 = 148 minutes. Dividing the result by 60 gives the charging time in hours: 2.5 hours.This means that an average smartphone can be fully charged in just about 2.5 hours with a 120-watt solar panel.   Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points.Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 120 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets, power banks and larger power stations etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection of USB devices via 1 x USB-C and an orange USB-A socket with QC3.0, also for fast charging. Connection of power stations via hollow DC plug, incl. various adapters. AdapterMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONS Output power of the solar panel: 120 wattsOutput voltage at the DC connection cable: 18 voltsOutput current at the DC connection cable: max. 6.6 ampsUSB-C connection socket: 1 x USB-C (for fast charging).Output voltage and current at the USB-C socket: 5V3.0A/9V2.0A/12V1.5AUSB-A socket: 1 x USB orange QC3.0 (for fast charging)Output voltage and current at the orange USB-A QC3 socket: 5V3.4A/9V2.5A/12V2.0ADC connection cable length: 2.5 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 520 x 370 x 50 mmDimensions when unfolded: 1660 x 520 x 35 mmWeight: 4.6 kgSCOPE OF DELIVERYSolar panel 120 Watt (1 piece)Carabiner hook (4 pieces)Integrated DC connection cable (1 piece)Plug adapter (3 pieces)User manual

€249.00*