BRESSER BR-MB32 Crossbar for Background Supports with roll/unroll Function
Finally, you can also conveniently roll up and unroll the studio background on the portable background support using a chain hoist.
- Pivoted crossbar for background supports
- Roll/unroll background rolls and cloths with ease
- Length with 3 segments: 256 cm in total, approx. 218 cm working length
- Length with 4 segments: 336 cm in total, approx. 298 cm working length
- Includes: Crossbar, roll holders, tube clips, chain, weight
Product number:
F002527
GTIN/EAN:
4007922045627
Product information "BRESSER BR-MB32 Crossbar for Background Supports with roll/unroll Function"
Unlike wall mounts, portable background systems with lamp tripods and a crossbar do not feature a chain to roll/unroll the attached backgrounds.
Roll/unroll background rolls with ease
The BRESSER BR-MB32 crossbar offers the perfect solution. Just like all other crossbars, it is secured to two lamp tripods, but it also features a pivot bearing on both ends, allowing the crossbar to be rotated.
Two roll holders ensure that the background roll turns with the crossbar. These can be positioned freely along the crossbar, allowing you to attach and roll/unroll 1.35 m wide rolls, 2 m wide rolls and 2.72 m wide rolls with ease.
Also suitable for background cloths
Background cloths with a seam for holding a crossbar cannot be fixed to the crossbar via roll holders. This crossbar, however, comes with 4 tube clips designed specifically for this purpose. Distributed evenly across the entire width of the cloth, these provide sufficient grip on the crossbar so that the background cloth can be rolled/unrolled by pulling on the chain.
FEATURES
WHAT’S INCLUDED
Roll/unroll background rolls with ease
The BRESSER BR-MB32 crossbar offers the perfect solution. Just like all other crossbars, it is secured to two lamp tripods, but it also features a pivot bearing on both ends, allowing the crossbar to be rotated.
Two roll holders ensure that the background roll turns with the crossbar. These can be positioned freely along the crossbar, allowing you to attach and roll/unroll 1.35 m wide rolls, 2 m wide rolls and 2.72 m wide rolls with ease.
Also suitable for background cloths
Background cloths with a seam for holding a crossbar cannot be fixed to the crossbar via roll holders. This crossbar, however, comes with 4 tube clips designed specifically for this purpose. Distributed evenly across the entire width of the cloth, these provide sufficient grip on the crossbar so that the background cloth can be rolled/unrolled by pulling on the chain.
FEATURES
- Crossbar for background supports
- Rolling/unrolling mechanism
- Freely positionable roll holders for fixing background rolls with a range of different lengths
- Tube clips for fixing background cloths
- 4 segments
- Length when 3 segments are used: 256 cm in total, approx. 218 cm working length
- Length when 4 segments are used: 336 cm in total, approx. 298 cm working length
WHAT’S INCLUDED
- Crossbar with 4 segments
- 2 roll holders
- 4 tube clips
- Chain (colour may vary)
- Weight
| Colour: | black |
|---|---|
| Material: | Aluminium |
Similar products
BRESSER SBP01 Paper Background Roll 2,72 x 11m Arctic White
€69.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.What’s the difference between Polar White and Arctic White?
Both colours can be described as white. Yet, arctic white is a little brighter whereas polar white has a warmer shade.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
BRESSER SBP01 Paper Background Roll 2,00 x 11m Arctic White
€59.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.What’s the difference between Polar White and Arctic White?
Both colours can be described as „white“. Yet, „arctic white“ is a little brighter whereas „polar white" has a warmer shade.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).
Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
BRESSER SBP02 Paper Background Roll 2,00 x 11m Black
€59.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).
Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrground roll
BRESSER SBP25 Paper Background Roll 2,00 x 11m Photogrey
€59.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on most background systems. The core has an inner diameter of 48 mm.OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen. FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
BRESSER SBP02 Paper Background Roll 2,72 x 11m Black
€69.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).
Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESStrong background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
BRESSER JM-56 HEX Spigot Adapter 50mm
€12.99*
This spigot adapter has on one side a 5/8" hexagonal head and on the other side a 3/8" male thread.Spigot adapter are handy tools to extend existing connections or to connect accessories or tripods with different connections with each other.FEATURESsturdy spigot adapterconnects accessories with different connectionshexagonal bolt: 5/8"male thread: 3/8"length: 50 mm (without thread)SCOPE OF DELIVERY1x spigot adapter
BRESSER MB-11 SET Wall/Ceiling Mount for 1 Background Roll
€16.09*
The practical BRESSER MB-11 Backdrop System for ceiling or wall mounting is a space-saving solution for mounting a vinyl or paper photo studio backdrop roll together with the Expan System from BRESSER MB series. A tube or rod with a maximum diameter of 1,9 cm can also be hooked in to use a BRESSER fabric backdrop with loop.FEATURESStrong mount for one background rollSuitable for walls and ceilingsOpening for tubes with a diameter up to 1,9 cmDimensions mounting plate: 8.7 x 4.9 cmLength bracket: 13 cmSCOPE OF DELIVERY2x wall mounts
BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
€19.99*
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm
BRESSER BR-LP15 Cleaning kit - 3 parts
€4.99*
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely.
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass.
With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows.
FEATURES
complete set for safe cleaning of camera lenses
bellows for removing coarse dirt particles and fluff without scratching the lens
lint-free microfibre cloth approx. 14,5x14,5cm
lens cleaning pencil for safe cleaning of optical and coated glass
SCOPE OF DELIVERY
1x bellows
1x lens cleaning pen
1x microfiber cloth
%
BRESSER JDD-6 Spiral Daylight Lamp E27 / 30 W
€9.00*
€9.95*
(9.55% saved)
A spiral bulb with a daylight colour temperature of 5500K. This bulb fits to a standard E27 thread and is recommended for the continuous use in the studio. The light yield is 5 times larger than the light yield of a normal bulb. Besides, this spiral bulb is more energy-saving, lasts longer and doesn't get so warm.fluorescence = light yield26W = 125W30W = 150W35W = 175W40W = 200W55W = 275W85W = 425W105W = 525W125W = 625WFEATURESenergy savings of up to 80 %low operating temperatureE27 threaddurable (8000 burning hours)no noise and no flickeringSCOPE OF DELIVERYspiral daylight lamp E27 thread
BRESSER SBP08 Paper Background Roll 1,36 x 11m Arctic White
€49.00*
BRESSER paper backdrop is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.What’s the difference between Polar White and Arctic White?
Both colours can be described as „white“. Yet, „arctic white“ is a little brighter whereas „polar white" has a warmer shade.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394). Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
BRESSER SBP01 Paper Background Roll 1,69 x 11m Arctic White
€55.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.What’s the difference between Polar White and Arctic White?
Both colours can be described as white. Yet, arctic white is a little brighter whereas polar white has a warmer shade.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
Customers also bought
BRESSER SBP25 Paper Background Roll 2,00 x 11m Photogrey
€59.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on most background systems. The core has an inner diameter of 48 mm.OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen. FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
Customers also viewed
%
BRESSER MB-11A Background system for hanging a background roll
€35.10*
€39.00*
(10% saved)
The perfect solution for on location and in the photo studio without drilling - with the BRESSER MB-11A background system for a background roll you are flexible and can be easily attach backgrounds of different sizes to tripods with spigot connection. You can choose from a wide range of BRESSER photo backgrounds made of paper or vinyl. The roll holders serve as expanders and are inserted into the cardboard core of the background roll and then simply twisted apart until the roll is fixed. With the help of the chain, the photo or video background is unrolled to the desired length.TIP: The system is not self-braking, therefore the additional fixation with clamps and for heavy backgrounds the use of the metal chain (item number F001578) is recommendedNote: The colours of the chains may vary and cannot be influenced when orderingPROPERTIESSturdy metal bracketsFor hanging a background rollSuitable for tripods with a spigot connectionUncomplicated set upAlso ideal as a portable systemSCOPE OF DELIVERY2x Holder1x Pair of reel holders1x Chain1x Weight
BRESSER Aluminium Tube for loose Studio Backgrounds 275cm
€65.00*
This sturdy aluminium tube is ideal for rolling loose vinyl, sheets of paper and cloth backgrounds.
The tube has an inner diameter of 49 mm and an outer diameter of 54 mm with a length of 275 cm.
The aluminium tube is compatible with all suspension systems from the MB series. The holders of these systems fit into the tube opening on both sides.
FEATURES
Sturdy aluminium tube
For rolling loose vinyl, sheets of paper and cloth backgroundsNot suitable for all BRESSER and SBP paper rolls
Not suitable as an additional support for paper rolls
Inner diameter: 49 mm
Outer diameter: 54 mm
Length: 275 cm
WHAT’S INCLUDED
1x 275 cm aluminium tube
%
BRESSER Vinyl Background Roll 2,00 x 6m Black/White
€175.50*
€195.00*
(10% saved)
With a BRESSER vinyl background, you have a two-colour, environmentally friendly, crease-free and hardly reflective photo background or video background. The durable and resistant vinyl convinces with 600 grams per square metre and the surface can be easily cleaned with a damp cloth. Give your photo or video studio a professional look with this quality background! The easy-care background is delivered on a sturdy aluminium tube, which allows the use of different BRESSER background systems and protects it from bending during transport.NOTE: To prevent the roll from unwinding by itself, we recommend fixing it with one or two clamps.PROPERTIESVinyl background rollRoll stabilised with aluminium tubeTube diameter: outside: 50 mm, inside: 48mmAlways tight and wrinkle freeDurable, environmetally friendlySCOPE OF DELIVERY1x Vinyl background roll
%
BRESSER BR-D60 Backgound System 4x6,5m
€157.50*
€175.00*
(10% saved)
Extra wide, extra high, extra stable – the BRESSER BR-D60 background system has been developed especially for large and heavy background rolls.
With a stand width of 60 cm in radius, the two lamp tripods ensure stability, even when extended to the maximum height of 4 metres. Thanks to air cushioning.
The rods comprise 7 individual parts. The 30 mm thick tubes are firmly secured to one another with a push-in/twist connection. You can use from 2 to all 7 of the individual rods to adjust the useful width of the BR-D60 background system from 180 to 650 cm.
FEATURES
Solid heavy-duty lamp tripods with air cushioning
Height adjustable from 140 - 400 cm
Stand width: 60 cm in radius
4 segments, maximum thickness 40 mm
Safety lock for spigot adapter
7-part rods with push-in/twist connections
Useful length variable with combination of 2 - 7 rod parts: 180 - 650 cm
Total weight: 9.5 kg
WHAT’S INCLUDED
2 heavy-duty lamp tripods
7-part rods
2 removable spigot adapters (1/4” male, 3/8” male)
2 wing nuts with washers
1 transport case
BRESSER BR-D36TB Crossbar for Background System 300cm broad
€34.59*
The telescopic crossbar consists of one piece and can easily be adjusted to any desired length up to 300 cm. It has mounting holes on both sides that fit perfectly onto standard spigot adapters.FEATURESsturdy crossbar for background systems3 segmentscontinuously extendableadjustable in length up to max. 300 cmmounting holes to plug on tripods with spigot adapterSCOPE OF DELIVERY1 x crossbarThe telescopic crossbar can be adjusted up to 300cmCharacteristics:max. length: 300cmScope of delievery:1x crossbar up to 300cm