BRESSER BR-C5 Tripod Carrying Bag for 5 Light Stands

Tripod bag with 4 padded inner compartments

  • Tripod bag for 5 lamp tripods
  • 4 padded inner compartments
  • Reinforced base, 2 carrying handles
  • Dimensions: 110 x 20 x 20 cm
  • Scope of delivery: 1x tripod bag


% €24.90* (7.23% saved)

Available, delivery time: 1-3 days

Product number: F001682
GTIN/EAN: 4007922030319
Product information "BRESSER BR-C5 Tripod Carrying Bag for 5 Light Stands"
With this tripod bag you can comfortably transport up to 5 light stands. Inside the bag there are 4 padded compartments, the fifth tripod can be placed in the middle of the bag. 

  • bag for up to 5 light stands
  • 4 padded compartments (one tripod comes into the middle)
  • reinforced bottom
  • 2 handles
  • zipper on side and top
  • 1x tripod bag
Colour: black

Suggested products

BRESSER BR-20 Gooseneck with clamps
Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/  Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm

BRESSER BR-2118B Product Shooting Kit 60 x 60 x 60cm
Practical complete set for perfectly illuminated product photos with different backgrounds.The BRESSER BR-2118B Product Shooting Set 60 x 60 x 60 cm consists of a foldable photo light box with diffuse, milk-white sides that reduce strong shadows when shooting products. Whether on location or in the home studio, with little space for lots of photo studio equipment, the Bresser Mini Photo Studio Set includes everything you need to get started straight away. The shooting box can be easily folded and stowed away. Ideal for on the go. The set includes four fabric backgrounds (120 cm x 60 cm) in the colours white, black, blue and red, which can be easily attached to the box with Velcro. The products can be illuminated with the two 50W halogen lamps including table tripod and practical tilting head. A stable tripod with a maximum height of 28 cm is included for mounting the camera or other accessories.PROPERTIESMini studio setIdeal for product photographyReduces distracting light refelctions and shadowsUncomolicated assembly and disassembly thanks to Velcro fastenerFour background cloth ( 120 x 60 cm) in red, blue, black, whiteTwo 50W halogen lamps incl. table tripodAdditional 28 cm high tripod with ball head and tiltable axisComofortable carrying bag extraCompartments for tripod and lampsSCOPE OD DELIVERY1x Shooting box 60 x 60 x 60 cm1x Camera tripod 28 cm2x 50W lamps with tripod feet4x Background: black, red, blue and white (120 x 60cm)1x Bag

BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

BRESSER BR-145 flexible gooseneck mount for tablets and mobile phones
With the flexible BRESSER BR-145 you just clamp the gooseneck to a table, bed or tripod and place the tablet, eBook or smartphone in the holder provided and have your hands free to film, to read or watch videos. Very popular with musicians to read notes and song lyrics on the tablet, when cooking to be able to follow recipes or videos instructions. The BRESSER BR-145 is used for simplified video conferencing and cool videos or photos by bloggers and vloggers. This gadget offers countless possibilities for use in leisure time as well as on the job. Sturdy yet flexible, the maximum carrying capactiy is 400g, and it fits in any pocket.PROPERTIESSuitable for smartphones/ tablets with a width of 12.5 to 25.5cmIndividually adjustableWith ball jointStable clamp for attachmentMaximum load capacity of 400gSCOPE OF DELIVERY1x Gooseneck tablet holder

€14.10* €14.85* (5.05% saved)
BRESSER JM-04 Double Pipe Clamp 2 x 35 mm
With the strong double pipe clamp made of metal, two tubes or bars with a thickness of 25 - 35 mm can be connected in parallel with each other. EIGENSCHAFTENsturdy metal double pipe clampsuitable for tubes with a diameter of 25 - 35 mmparallel connection of two pipesSCOPE OF DELIVERY1x double pipe clamp

BRESSER BR-RL2KS Charger for 2 V-Lock Battery Packs
With this dual charger all battery packs with a V-Lock mount can be charged (including those from Bresser, Soca Land). The batteries can be attached at the side with a click function and under the letters L and R the charge status of the respective battery is displayed. Underneath is a fold-out stand so that the charger remains upright. The charger can also be used as a mains plug.SPECIFICATIONSMounting: V-mountSuitable for lithium-ion batteriesInput 220 VOutput charger for one battery: 16.8 V-4A / for 2 batteries: 16.8 V-3AOutput as power supply: 15V-4.0ACharging time from empty to full 10 hoursOperating temperature: -30C - + 55CDimensioning: LxWxH 24x14x6cmWeight: 1000 g SCOPE OF DELIVERYDual chargerPower cable4 pins adapter cable

BRESSER BR-FA014 Gooseneck 32 cm on both Sides with 5/8'' Opening and Spigot
With the 32 cm long flexible arm with spigot adapter and spigot connection for mounting on lamp tripods, you get more flexibility for the alignment of photo studio accessories in a very uncomplicated way. Simply bring a ring light, LED surface light, daylight light or your camera into the right position with the stable Gooseneck, which can be loaded up to 2 kg. With the included spigot, both the 1/4" or 3/8" can be used to screw on accessories. The other side of the gooseneck is simply mounted on a lamp tripod with spigot.PROPERTIES Very sturdy gooseneckTotal length: 32 cmLoad capacity: 2 kgBoth ends and sides with 5/8" openingsIncludes 1/4" and 3/8" spigot adapters (6,5 cm long without thread)SCOPE OF DELIVERY1x Gooseneck1x Spigot adapter (1/4" male, 3/8" male)

€24.99* €26.85* (6.93% saved)
BRESSER BR-05B Space Arm for Lightstands including Multiclamp
The 121 cm long swivel arm with two hinges consists of two solid metal bars, each of which is 60.5 cm long.You can therefore choose to use only the front bar, which is equipped with a spigot adapter with a 1/4” external thread and one hinge.The swivel arm can be secured to a lamp stand with a spigot adapter and used as an extension or a boom arm. Thanks to the multi clamp that can support loads of up to 12 kg, it can also be secured to tabletops, shelves and pipes with a diameter of 2-10 cm.FEATURES OF SWIVEL ARMTwo-section swivel arm, can also be used individually2 hinges, adjustable in steps with safety latchCan be used as extension or boom arm for lamp standsSpigot adapter with 1/4” external threadSolid metal, 28 mm in diameterLoad capacity: 2.5 kgTotal length without spigot adapter 121 cmFEATURES OF MULTI CLAMPRobust metal multi clampThree 5/8” spigot adapter, one with 1/4” threaded screwMaximum load capacity: 12 kgFor attachment to poles, posts, pipes with a diameter of 2 to 10 cmDELIVERY CONTENT2-section swivel arm 1 multi clamp

€71.10* €79.00* (10% saved)
BRESSER B-SC2 MULTI clamp medium
Attach tubes and other accessories easily to lamp stands. The bracket has a very large opening and is rubberized. Below are threads for 1/4'' and 3/8'' screws of the spigot connections. FEATURESLarge opening (max. 5,5 cm)1/4'' and 3/8'' threadsRubberized endsSCOPE OF DELIVERY1x Multi Bracket

BRESSER BR-C48 Studio bag 48x28x30cm
With the BRESSER BR-C48 studio case, your valuable and sensitive studio equipment is securely stowed away thanks to the all-round padded interior and the reinforcement of the outer edges.For comfortable transport to outside appointments, the practical studio case has both carrying handles and a length-adjustable, padded shoulder strap.The inferior dimensions of 48 x 28 x 30 cm offer enough space for medium-size studio lamps or permanent lights. The interior partitioning can be individually adjusted with the included dividers. Smaller accessories can be stored separately in the zipped mesh compartment on the inside of the case lid.PROPERTIESSturdy case for studio accessoriesInterior dimensions: 48 x 28 x 30 cmInterior padded all aroundDividers for individual interior organisationAdditional mesh compartment for small accessories in the lidReinforced edgesCarrying handles and padded and adjustable shoulder strapSCOPE OF DELIVERY1x Case1x Shoulder strap1x Divider, lenghtwise2x Partition, crosswise

BRESSER Honeycomb for Super Quick Octabox 120 cm
The BRESSER honeycomb for our popular Super Quick Octaboxes in various sizes reduces stray light.With a honeycomb you rely on more targeted light guidance and bundled light. This bundling of the light beam enables impressive light-shadow-accents in portrait photography.But also in product photography the motifs can be perfectly staged with the help of the honeycomb grid.The BRESSER honeycombs for softboxes are quickly and easily attached to the edge of the Octagon softbox with a Velcro fastener. In this way, further creative possibilities for lighting in photography are opened up in no time at all.PROPERTIESHoneycomb for the BRESSER Super Quick Octagon 120 cmMore control and creativityVelcro fastenerCompact sizeVery user-friendlySCOPE OF DELIVERYBRESSER Honeycomb Quick Octagon 120 cm

€28.40* €31.50* (9.84% saved)
BRESSER BR-BG83 Reflective Umbrella black/gold 83cm
The BRESSER BR-BG83 reflex umbrella should be a practical companion in any photo studio equipment, especially when travelling. The highly reflective, golden inside ensures high-contrast light. The photo studio reflective umbrella can be easily attached to photo studio flashes or continuous lights with the appropriate device or with clamps.PROPERTIESReflective umbrella gold/black 83 cmStrong metal ribsRib thickness 8 mmSuitable for all flashlights with shield connectionStrong fabric / foilFold up to save space and is easy to transportSCOPE OF DELIVERY1x Refelx umbrella

€16.59* €18.40* (9.84% saved)