Vixen Telescope SDP65SS Astrograph

Focal Reducer for the SDP65SS AstrographDeveloped exclusively for the SDP65SS, this focal reducer shortens the focal length by a factor of 0.8× and lowers the focal ratio from f/5.5 to f/4.4. In practice, the focal length is reduced from 360 mm to 288 mm, enabling a much wider field of view.The advanced optical design uses 2 elements in 2 groups with a multi-coating for high light transmission.  The reducer illuminates a 30 mm image circle, covering the APS-C format at over 90 % right into the corners. Even at the extreme edge of a 44 mm full-frame sensor, it maintains ≈ 70 % light intensity while keeping distortion low—for sharp, clean star images across the frame. FEATURES Focal length: SDP65SS 360 mm (f/5.5) → 288 mm (f/4.4) Optical design: 2 groups / 2 elements Coating: Multi-coating Connection (telescope side): M48 × 0.75, internal thread Connection (camera side): M56 × 0.75, internal thread Filter thread: M48 Illuminated image circle: 30 mm (APS-C > 90 %, full-frame edge ≈ 70 %) SCOPE OF DELIVERY SDP Focal Reducer 0.8×

The Vixen 60 mm to M48 camera adapter is used to mount an astronomical CMOS camera to Vixen telescopes with a 60 mm focuser. The adapter is suitable for cameras or accessories with an M48 × 0.75 internal thread. You can directly connect third-party CMOS cameras and other products with an M48 thread. (Depending on the CMOS camera, an extension tube (optional) may be required.) The adapter can be freely rotated by loosening the clamping screws to orient the image as desired. Using the optional M56 Filter Conversion Adapter 48/52, you can attach 48 mm / 52 mm third-party photographic filters. Note:When using the M56 Filter Conversion Adapter 48/52, the PH corrector, PH extender, Coma Corrector 3 and SDP Reducer cannot be used.  FEATURES Camera adapter: 60 mm to M48 Telescope side connection: 60 mm, P = 0.75 mm Accessory side (internal): M56 × 0.75 (female) Camera side (internal): M48 × 0.75 (female) Adapter: rotatable SCOPE OF DELIVERY 60 mm to M48 camera adapter

M54 Adapter Ring for adapting to 54 mm accessories (for use with the 60 mm to M48 camera adapter)Replace the inner ring of the 60 mm to M48 camera adapter (optional) to attach cameras or accessories with a 54 mm internal thread (M54 × 0.75). Ideal for full-frame CMOS cameras: When shooting with a full-frame sensor or a CMOS camera, the larger diameter helps minimise vignetting.With the optional M56 Filter Conversion Adapter 48/52, you can use standard 48 mm / 52 mm photographic filters. Note:When using the M56 Filter Conversion Adapter 48/52, the PH corrector, PH extender, Coma Corrector 3 and SDP Reducer cannot be used.  FEATURES Telescope-side connection (female): M56 × 0.75 (for filter mount/adapter ring) Camera-side connection (male): M54 × 0.75 Compatible with: 60 mm to M48 camera adapter Not usable with: Wide Photo Adapter 60DX and Wide Photo Adapter 60 mm Dimensions: Ø 68 × 12 mm Weight: 23 g SCOPE OF DELIVERY Vixen M54 Adapter Ring

The Wide Photo Adapter 60DX connects your Nikon DSLR camera to your telescope via a 60 mm thread. Thanks to the use of new materials and an improved design, Vixen was able to significantly improve the precision and load capacity compared with conventional adapters. The adapter's large interior diameter prevents shadows at the edges of the image when using a full-frame DSLR camera.FEATURESIncreased material strength for additional stability6 screws hold the camera in position (compared with 4 on most conventional adapters)Screw tips with Delrin inserts prevents the camera from tilting and minimizes distortion.Large interior diameter prevents shadowingBlack interior prevents scattered lightCompatible with 60 mm accessories when the camera adapter is removed2 screw sets (L and S) prevent scratches on the camera housing2 screw sets for adjusting the rotation resistanceDELIVERY CONTENTVixen Wide Photo Adapter 60DX for Nikon cameras2 screw sets (L and S)

​This Vixen focal adapter connects your DSLR or other camera to your telescope with a 60 mm thread.The large interior diameter of the adapter prevents vignetting at the edges of full-frame camera sensors.The focal adapter can be rotated so that the image field can be perfectly framed.This rotational adjustment is facilitated via 3 locking screws, ensuring a firm lock.Note: Vixen T2 ring is also required for your brand of camera.In this case, the inner ring of the T2 adapter is removed and clamped in place with three small grub screws.PROPERTIESConnects your DSLR camera to your telescopePrevents shadowingDimensions: 72 mm x 20 mmWeight: 55 gWHAT'S INCLUDEDFocal adapter universal 60 mmAssembly tool

Vixen 60DX Focal adaptor for Canon EOS Cameras This Vixen 60DX is a photographic adaptor for Canon EOS cameras, for use with telescopes with a 60 mm focuser drawtube connection thread. A redesign by Vixen uses new tougher materials for a more solid connection and also offers an accurate, well-machined camera rotator ring, in order to help frame your images perfectly. Camera-Adaptor for Canon EOS with 60mm Focuser connection thread Large inner diameter for full-format cameras, helping to minimise vignetting 6 locking 60° spaced bolts to hold the camera’s rotation in position Dimensions: 81mm x 30 mm / weight: 190g The option of using 6 long or 6 short fixing screws for the rotator The Vixen 60DA Focal adaptor connects your Canon EOS DSLR Camera to a telescope with an appropriate 60 mm Focuser Drawtube Thread. Thanks to the use of new materials and an improved design Vixen was able to considerably uprate both precision and durability, when compared to conventional rotational camera adaptors. Two sets of rotational locking bolts (Long and Short) are supplied. The longer ones are knurled and easy to turn by hand. The shorter options help to prevent marring of the camera casing, when using certain designs of camera and are also much less easy to turn by hand, increasing security if you need the camera locked in a particular rotational position for longer periods. The large inner dimension of this adaptor prevents vignetting at the edges of the image when using full frame DSLR cameras. Canon EOS-Bayonet fastener made of hardwearing brass, for years of hassle-free use. Increased material quality over conventional adapters provides more stability in use. 6 fixing bolts hold the camera in rotational position for increased sturdiness (standard rotators often only use 4, or less). FEATURES Screw tips with Delrin-tips prevent tilting of the camera and subsequent image distortion. Large inner diameter prevents vignetting. Inner blackening suppresses scattered light. Compatible with 60 mm accessories, when the camera adaptor is taken off. Two rotational bolt sets (Long and Short) are supplied. SCOPE OF DELIVERY 60DA Focal adaptor 6 long and 6 short fixing screws

The Vixen focal adapter can be used to connect your DSLR camera to your telescope via a 60-mm thread. The large internal diameter of the adapter prevents shadows at the edges of the image when using a full-frame DSLR camera. The focal adapter can also be rotated to rotate the field of view selection. Three locking screws are provided for clamping.Note: Vixen T2 ring also required for your Canon. In this case, the inner ring is removed from the T2 adapter and clamped using three small grub screws.FEATURES60-mm connection thread for OAZWeight: 56 gT-ring for Canon EOS also requiredPACKAGE CONTENTSVixen focal adapter for Canon EOS

This adapter ring enables you to take colour and nebula filters with M48 and M52 thread.The M56 thread of the filter adapter is screwed into the Wide Photo Adapter AD 60DX, for example, and then offers an adaptation to M52 and M48 filter threads for various nebula filters for photography. The adapter has each one 48 mm and 52 mm thread. The adapter ring can be used on the Wide Photo Adapter 60DX, Wide Photo Adapter 60 mm, 60 mm ring with T-thread adapter or the EA60mm up to 50.8mm.The adapter ring can be used on the telescopes A81M, A105M II, SD81S, SD115S, AX103S, FL55SS, VC200L, VMC200L, VMC260Lin combination with the optionally available adapters described above.IMPORTANT NOTE: The Corrector PH, the Extender PH and the Coma Corrector 3 cannot be used with this Adater when used with the R200SS OTA in combination with the EA 60mm to 50.8mm.FEATURESInternal thread M48 (diameter 48 mm, thread pitch = 0.75 mm)Internal thread M52 (diameter 52 mm, thread pitch = 0.75 mm)External thread M56 (diameter 56 mm, thread pitch = 0.75 mm)Applicable adapters: Wide Photo AD 60DX, Wide Photo AD 60 mm, 60 mm ring with T-thread AD, EA60 mm to 50.8 mmDimensions: 56 x 7 mmWeight: 7gMade in JapanSCOPE OF DELIVERYFilter adapter for M48mm and M52mm filter thread

​The 1: 7 reduction enables very fine focusing of targets.An indispensable accessory, especially in astrophotography.The reduction can be retrofitted on the following telescopes:A80M, A105M, NA140SSf, ED81S, ED103S, ED115S, AX103S, VC200L, VMC200L and R200SSCannot be used on old devices from the 90s with plastic focusing knobs - in these cases, it is also necessary to swap the focus spindle (please contact us for details).PROPERTIESAllows very fine focusingIndispensable in astrophotographyCan be retrofitted to many Vixen telescopesReduced to 7:1Weight: 170 gWHAT'S INCLUDEDDual Speed KnobAssembly tool

T2 rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATUREST2 adapter ring for Nikon camerasAdapts the camera to telescopes and microscopesWeight: 22 gPACKAGE CONTENTSVixen T2 ring for Nikon

T-rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATURESVixen T-ring for Canon EOS camerasConnects a camera adapter to the cameraFor microscopes, telescopes and T2 lensesWeight: 52 gPACKAGE CONTENTSVixen T-ring for Canon EOS

This T2 ring allows you to use your Sony camera on a telescope or microscope with a T2 thread.Depending on the mode, you may require an additional camera adapter.FEATUREST-2 ring for connecting an SLR cameraDesigned for Sony EWeight: 113 gDELIVERY CONTENTT-2 Ring Sony E

Connects a Four Thirds camera to your telescope or microscope.A camera adapter is required for this purposeWeight: 58 gDELIVERY CONTENTVixen T-ring - Four Thirds

T-rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATURESMicro 4/3 T-ringFor telescopes and microscopesWeight: 110 gPACKAGE CONTENTSMicro 4/3 T-ring

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 10mm is an excellent eyepiece for medium to higher power on most telescopes, an ideal premium replacement for eyepieces supplied with telescopes, especially good for Planetary observers. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece body, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the field of view. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 12mm is an excellent eyepiece for medium to higher power on most telescopes, an ideal general purpose eyepiece and major improvement over standard eyepieces. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece body, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the viewing circle. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 15mm SLV is an excellent eyepiece for medium power for most telescopes, an ideal general purpose eyepiece and provides excellent comfort with long eye relief. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece body, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the viewing circle. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

The SLV eyepieces with high-quality lanthanum glass provide remarkably clear and high-contrast images of the night sky right to the edge of the field of view. The lanthanum elements almost completely eliminate chromatic aberration, producing a colour-neutral image right up to the edges. The lenses are also fully multi-coated for high light transmission. The eyecup can be twisted up and down, making the eyepiece suitable for glasses wearers. The large exit pupil distance of 20 mm means that the eye does not become fatigued during longer periods of use, and the entire field of view can be seen clearly even when wearing glasses. The eyepiece also features a standard 1.25" filter thread for colour and nebula filters. In addition, the insides of the eyepiece sleeves are fully blackened to reduce distracting reflections. FEATURES Very high contrast and sharpness over the entire field of view Comfortable interpupillary distance of 20 mm Lanthanum glass almost completely eliminates chromatic aberration 31.7 mm eyepiece barrel 1.25" filter thread Full multi-layered coating Eyecup can be twisted down for glasses wearers Weight: 173 g PACKAGE CONTENTS Vixen SLV 50° eyepiece Dust caps

The SLV eyepieces with high-quality lanthanum glass provide remarkably clear and high-contrast star images right up to the edge.The lenses are fully multi-coated for high light transmission.Thanks to the large and comfortable eye relief distance of 20 mm , the eye comfort is maintained, even during longer observing sessions.Even those who wear glasses will have the entire field of view is clearly visible.The click stop eyecups can be tuned up or down to the user's preference.PROPERTIESVery high sharpness and contrast across the entire field of viewComfortable eye relief of 20mmalmost no colour defects due to lanthanum glass1.25" 31.7 mm barrel sizeTurn-down eyecup for people who wear glassesWeight: 155 gWHAT'S INCLUDEDVixen SLV 50 ° eyepieceDust caps

The Vixen SLV eyepieces use high-quality lanthanum glass to deliver remarkably clear and high-contrast star images right up to the edge of the field of view.All lenses are fully multi-coated for high light transmission.Twist up eyecups allow the user to set observing height to their own comfortable specification.  20mm eye relief means that even those who have to wear glasses to observe are able to see right to the edge of the field of view.PROPERTIESVery high sharpness and contrast across the entire field of viewComfortable eye relief of 20mmalmost no chromatism visible due to lanthanum glass31.7 mm receptacle connectionEyecup that can be turned down for glasses wearersWeight: 151gWHAT'S INCLUDEDVixen SLV 50 ° eyepieceDust caps

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 4mm is an excellent higher power eyepiece on shorter focal length telescopes, especially good for Lunar viewing - or for those trying to max out their longer focal length scopes for double star work. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece barrel, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the viewing circle. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 5mm is an excellent higher power eyepiece for most telescopes, especially good for Lunar and Planetary observers. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece barrel, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the viewing circle. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 6mm is an excellent choice for higher power on most telescopes, especially good for Lunar and Planetary observers. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece barrel, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the viewing circle. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

​The Vixen SLV series are the modern take on the classic Vixen Lanthanum eyepieces. These eyepieces were legendary for their generous eye relief and precise nature, making them a firm favourite with planetary, lunar and double star observers. This 9mm is an excellent choice for higher power on most telescopes, an ideal premium replacement for eyepieces supplied with many telescopes, especially good for Planetary observers. The SLV Series of Vixen Eyepieces feature a hexagonal shaped eyepiece barrel, long 20mm eye relief, and twist up click stop eyecup for adjusting to the most comfortable viewing. The SLV eyepieces feature high grade lanthanum glass, and deliver remarkably clear and high contrast star images to the edge of the viewing circle. The lenses are fully multicoated for high light transmission.Size 31.7mm/1.25"Apparent FOV 50°Eye relief 20mmWeight 168g (5.92oz)

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SX2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins.An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 12 kg, the axis cross of the mount weighs just 7.0 kg (15.4 lbs) making it ideal for mobile observations.In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SX2 mount in detail Precision stepper motors and micro-step motion control systemAt the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweightThe solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained. Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness  Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 12 kg, photographic, without counterweight Counterweight: 1x 1.9 kg  Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L), weight: 7.0 kg (15.4 lbs), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input: ST4 Power consumption SX2WL+Wireless unit: DC12V / 0.3-2.0 A (load 8 kg), 0.4-2.2 A (load 12 kg) SCOPE OF DELIVERYSX2WL EQ mount Wireless unit Counterweight: 1.9 kg (1pc) Mounting tools Cigarette lighter cable

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins. An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 15 kg, the axis cross of the mount weighs just 9.2 kg making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SXD2 mount in detail Precision stepper motors and micro-step motion control system At the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gears High-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweight The solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. Built-in PFL-II polar finder with illumination The built-in 5x20mm polar finder with 10° field of view has a 3-star alignment system. This eliminates the inconvenience of setting the date and original time. The illuminated reticle with variable brightness and automatic switch-off is adjustable in 8 levels and illuminated in red. The adjustment accuracy is 3 arc minutes. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller. The STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Polar finder scope: 6x20 mm, PFL-II polar finder Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweight: 1x 1.9 kg and 1x 3.7 kg Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL EQ mount Wireless unit 2 counterweights: 1.9 kg and 3.7 kg Mounting tools Pole finder PFL-II Cigarette lighter cable

Vixen has developed a new generation of SX mounts with Wifi for demanding observers and astrophotographers. The SXP2WL mount is easily operated via a Wifi module using a smartphone or tablet. For user-friendly control of the mount, the free STAR BOOK Wireless app is available. This allows you to use practical celestial navigation functions such as automatic GoTo slewing to certain celestial objects easily via your smartphone or tablet. Since the power consumption of the traditional LCD screen (STAR BOOK TEN) is eliminated, the power consumption of the mount is reduced by up to 20%. This enables astronomical observations and astrophotography over longer periods.By selecting the desired celestial object from a list, it will automatically slew into the telescope's field of view and tracking begins. A previously existing STAR BOOK TEN controller can also be used with this mount without any issues. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXP2WL sets a new standard in performance and precision in the Vixen mount family.The axis cross of the SXP2 mount has a photographic payload of 17 kg and weighs just 13.3 kg, making it ideal for mobile observations. Additionally, the motors located in the lower part of the mount serve as counterweights. As a result, the mount requires fewer weights for balancing.On the SXP2 mount, larger ball bearings are used than in previous models to increase accuracy and payload capacity. The mount housing also features a greater material thickness. To make the polar block even more stable, the axis cross is firmly clamped into a fork. The SXP2 mount in detail Stronger mount housingOn the SXP2 mount, larger ball bearings are used than in previous models to increase accuracy and payload capacity. The mount housing also features greater material thickness. To make the polar block even more stable, the axis cross is firmly clamped into a fork. Very precise tracking with P-PEC functionThe SXP2 mount is delivered with the modern STAR BOOK TEN controller. It offers you the P-PEC function for particularly precise tracking. The term 'PEC' stands for 'Periodic Error Correction.' The system corrects mechanical errors that cause periodic errors in the gear systems. The SXP2 equatorial mount provides a P-PEC function derived from the PEC function. The P-PEC function saves your correction records even after the mount's power is turned off. This means you don’t have to re-enter the data each time, allowing for faster operation and more accurate tracking. Quiet belt drive system with minimal play In conventional motor drive systems of equatorial mounts, gears are used, which are driven by the motor. However, this design has the disadvantage that a certain amount of play occurs between the gears. To avoid the inaccuracies caused by this, the SXP2 mount uses a belt drive system. This significantly reduces both gear play and drive noise. In addition, the device responds more quickly when corrections need to be made. 16 bearings The mechanical parts of the SXP2 mount contain a total of 16 bearings. A set of tapered roller bearings is used for the RA axis to provide more stability for more precise tracking. Stable altitude block for alignment The SXP2 mount uses the same fork as the heavier AXJ mount. This new construction enables quick and stable latitude adjustment. Simple and precise polar alignment via reference stars The 6x20 polar finder is already pre-installed. This allows you to adjust the polar alignment (for both the northern and southern hemispheres). The polar finder offers a variable illuminated reticle with an automatic shut-off function. The brightness can be adjusted in 8 steps, allowing you to tailor it to your individual needs. Additionally, the polar finder is equipped with direct alignment using three reference stars and can achieve an accuracy of up to 3 arc minutes. Variable mount head The mount head has a diameter of 35 mm and eight threaded holes for M8 screws, arranged at 45-degree intervals. An optional accessory plate can be attached directly or in combination with an optional mounting block for dovetail plates. Additionally, the threaded holes on the mount head allow the use of mounting rails from other manufacturers. ATTENTION: For mounting Vixen standard dovetail rails, the X000266 adapter is also required. Combination of innovative, elegant design and user-friendly operation The stable, rigid mount body with very precise tracking has been further optimised by the P-PEC function. This makes the SXP2 a highly precise and easy-to-use mount that will delight every astrophotographer and observer. Special motor placement for fewer counterweights The heavy RA and DEC motor units are housed in the lower part of the declination, so the centre of gravity of the axis cross lies beneath the RA and DEC axes. As a result, the declination body acts as a counterweight. The flat mount head also allows the mount to be balanced with significantly fewer counterweights. Retractable counterweight bar The counterweight bar is made of solid stainless steel and has a diameter of 20 mm. It can be used with all counterweights from the SX and GP mount series. The counterweight bar is housed in the declination body. Accessory shoe For simple and quick polar alignment, the #35511 Polar Meter can be slid onto this shoe. Latitude adjustment The latitude can be adjusted between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium, and low latitudes).The Vixen Wifi adapter in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the free STAR BOOK Wireless smartphone app, you can navigate the sky without any cables. The app transforms your mobile device into a controller for the equatorial mount in no time. The response delay of the mount, often considered the greatest disadvantage of wireless connections, has been reduced to a level comparable with wired solutions. Reduced power consumption compared to conventional controllers with LCD monitors The power consumption of the mount is reduced by up to 20%, allowing for longer observations compared to traditional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller The STAR BOOK Wireless app is structured similarly to the STAR BOOK TEN controller. Depending on the star chart settings, it contains up to 259,000 celestial objects. Simply tap on a celestial object from the object list to start GoTo. The mount will automatically move to the target and place it in the telescope's field of view. All the popular features of the STAR BOOK TEN remain available to you. Comfortable operation While looking through the telescope, you can control the mount by swiping on the star map in the app. Since there are no buttons, you simply glide your finger over the star map to comfortably operate the mount. Extensive astronomical data included This includes data for well-observed celestial bodies such as Messier objects, NGC objects, IC objects, as well as the Sun, Moon, planets, comets, and dwarf planets. High-precision alignment By aligning with one or two stars, you already achieve quite accurate positioning of the mount. Aligning with three or more stars allows for high-precision alignment of the mount, suitable for high magnifications. The objects will then be approached exactly and centered in the telescope's field of view. The alignment information is saved and can be retained even when the device is turned off. By leaving the telescope in its current state after an observation, without moving it, you can start the next observation with the same settings through automatic installation. Custom settings The app offers various custom settings, as in the STAR BOOK TEN controller, such as gear backlash compensation, night mode in red, autoguider, and variable GoTo speed and LED brightness. You can also set the time for the reversal of the telescope tube (Meridian Flip) as desired. Even if the object moves south during tracking, you can prevent the telescope tube from flipping over.Important information Not usable with old SX mounts that use the old blue Star Book. Technical information about the Wifi module 32-bit CISC processor with 120 MHz The unit is connected to the mount via a D-SUB 9-pin connector, as with the STAR BOOK TEN. It features a 6-pin, 6-wire modular plug for external autoguider operation. Supported operating systems: Android 6 or higher, iOS 9.0 or higher, Wifi standard: IEEE 802.11b/g/nFEATURESRA worm gear: 73.2 mm Ø, brass gear with 180 teethDEC worm gear: 73.2 mm Ø, brass gear with 180 teethWorm shaft: 9 mm Ø, brassRA & DEC axis: 40 mm Ø, carbon steel bearings, 16 bearingsCounterweight shaft: 20 mm Ø RAPolar finder: PF-LII 6x20 mmStepper motors: 250 PPS speed, max. 1000x sidereal rateMax load: 17 kg photographic without counterweightPower connection: DC12 V 0.45~2.2 ADimensions: 386 x 419 x 128 mmAxis cross weight: 13.3 kg without counterweightCounterweights: 3.7 kg, 1.9 kgSCOPE OF DELIVERYSXP2WL mountWifi module2 counterweights: 1.9 kg and 3.7 kgMounting toolPolar finder PFL-IICigarette lighter cable

Designed as a complement to the AXD2 equatorial mount, the AXJ mount offers outstanding durability and precision. The AXJ mount can also be used on AXD-TR102 tripods with an adapter. Periodic errors on mounts are usually measured and corrected by the user. Unlike the old StarBook controller, the STAR BOOK TEN controller saves these errors permanently. The periodic error of the mount is measured in the factory (total of 12 points per 30 degrees worm gear) and corrected before delivery. This is known as V-PEC and functions automatically as soon as you use the mount. It delivers an accuracy of +/- 4.0 arc seconds. You can increase the tracking accuracy further by saving your own recorded periodic errors. Vixen uses a new Belt-drive system in the AXJ mount. The gear drive was replaced with a toothed belt drive. This gives the mount a quicker reaction time and lower backlash. It also helps to minimize noise. The 6x20 polar finder scope is pre-installed. This allows the user to configure the polar alignment (for both the northern and southern hemispheres). The polar finder scope has a variable illuminated reticle with an automatic power-off function. The brightness can be adjusted in 8 levels so that the user can configure the desired brightness. SETTING ACCURACY OF LESS THAN 3 ARC MINUTES The dark field illumination (red LED) turns on when the push button is pressed. The reticle also lights up in red so that the observer can recognize and align stars in the background of the reticle. The light turns off automatically after a few minutes to save battery power. 2 bearing sets (4 pieces) are used for the shaft of the RA axis. Thanks to the newly developed EQ design, the ZXJ mount has a higher load capacity of 22 kg. As the motors, worm shaft and worm gear are located in the lower part of the mount, fewer counterweights are required than with conventional mounts. The STAR BOOK TEN controller is a modern control system with a high-resolution colour monitor. The STAR BOOK TEN system contains more than 272,000 celestial objects, including 260,000 stars from the SAO catalogue, 109 Messier objects, 7840 NGC objects and 5380 IC objects, as well the soon, moon and planets. Objects can be accessed by name, and information such as images and data can be defined separately. FEATURES +/-4.0 arc seconds with V-PEC V-PEC (Vixen-Permanent Periodic Error Correction) Belt drive system (prevents backlash and minimizes noise) 14 ball bearings Polar alignment (variable fork fix type) Polar finder with reference star alignment STAR BOOK TEN controller with autoguider input Retractable counterweight bar WHAT’S INCLUDED AXJ mount Starbook Ten controller 2 counterweights (3.7 kg and 1.5 kg) GoTo mount with Star Book Ten controller 22 kg load (photographic)