Vixen SD81SII Telescope OTA

A custom-fit bag for storing a complete Porta telescope set with tripod. It features one external slip pocket for accessories and three additional ones inside the bag. The telescope bag is equipped with long carrying straps for comfortable transport and can also be carried over the shoulder. Carrying loops at both ends further enhance ease of transport. The bag is suitable for the following Porta telescope sets: A80MfA70Lf ED80SfSD81S IIA81M Also suitable for the Vixen Mini Porta und Mobile Porta telescope sets and other devices with external dimensions less than 100 x 12 x 12 cm FEATURES Dimensions: 107 x 27 x 23 cm Weight: 1.5 kg Material: Polyester SCOPE OF DELIVERY Transport bag for Porta telescope sets

Safe and convenient bag to transport your OTA or tripod to your observing site. Holds many size tubes. Wrap the optical tube in the protective cloth with Velcro tape and secure it to the wall inside the carrying bag. Includes 2 accessory pouches to store a finder scope and flip mirror. Reflective tape on the carry strap increases visibility at a dark site.Suggested tubes and tripods: A80M ; A80Mf ; A70Lf ; ED103S; AX103S ; SXGHAL130 and SXG-AL130 TripodFEATUREScarry bag for tubes & tripod maximum optical tube size: 850x125mm (L&W)reflective tape on handles prevent lossSCOPE OF DELIVERY1x Vixen Carry Bag2x accessory pouches

High-quality eyepiece for beginners who want high-quality results at an affordable price.The 2-group, 4-element Plossl lens design of the NPL eyepieces ensures clear and sharp images with good colour correction. The lenses are fully multi-coated for high light transmission, the eyepieces also offer a comfortable eye distance.Compared with predecessor models, the chromatic aberration has been further reduced to render razor-sharp edges.FEATURESPlug-in diameter: 31.7 mm Apparent field of vision: 50° Exit pupil distance: 15 mm Weight: 110 g DELIVERY CONTENT 1x 20 mm eyepiece (1.25'')Protective caps on front and back

The MOBILE PORTA is a small transportable travel mount for fast observations and does not require time-consuming installation. Thanks to the new compact and lightweight design, it is ready for use in no time and is easy to transport. The angle of the new multi arm can be adjusted, allowing you to observe at the zenith - including with longer telescopes. In addition to these new functions, the mount also comes with the other tried-and-tested features of the Porta series, such as a slip clutch and fine adjustment. Easy to adjust The telescope can be moved by hand in all directions and is held in position by a slip clutch. This allows you to adjust the telescope to your desired object with ease. The angle of the new multi arm can be adjusted, allowing you to observe at the zenith - including with longer telescopes. The angle of the multi arm can be adjusted in 15-degree steps. The multi arm system also enables you to collapse the mount for easy transport and storage, e.g. in the Telescope and Tripod Bag 100 (item no. 35655). Vixen dovetail standard mount As with all Vixen mounts, the MOBILE PORTA mount uses the Vixen world standard dovetail adapter for the telescope connection. The MOBILE PORTA is recommended for telescopes with a maximum weight of 3.5 kg. Accessory storage The accessory holder features slots for your eyepieces. It can also be used to store smaller photography accessories. The holder is mounted via a centrally positioned screw.FEATURESLightweight telescope mount for rapid observationsBuilt-in slip clutch and fine adjustment in the axesAngle of the multi arm can be adjustedIncludes tripod and storage trayWeight: 2.4 kgDELIVERY CONTENTMobile Porta mountTripod Storage trayShafts for fine adjustment

The Vixen Porta II is a high-quality azimuthal mount from the award-winning manufacturer Vixen. Featuring an intuitive, versatile and reliable design, the Porta II was specially developed to enable quick and precise telescopic observations along the vertical and horizontal axes without the need for a complex setup. It comes with fine adjustment wheels for fine tuning the position of the telescope to track astronomical objects. It also has a highly portable design thanks to the detachable mount head, which can be quickly detached from the tripod via an M10 screw. In addition, the dovetail mounting system (Vixen standard) ensures maximum compatibility with a wide range of telescopes. The Vixen Porta II mount in detail Easy to use The Porta II does not require a clamp, as it sports a slip clutch that allows you to adjust the mount to your desired object. It also holds its position automatically, making it very easy to use. Highly portable design The mount is easy to transport thanks to the Porta II mount head, which can be detached by removing a single screw. Easy to operateThe Porta II adjustment system allows you to track objects and make fine adjustments using the supplied shafts, which can be repositioned as necessary for optimal viewing comfort.Practical accessory storage The accessory holder features slots for your eyepieces. It can also be used to store smaller photography accessories. The holder is easy to mount via a centrally positioned screw. Built-in tool The mount comes with a tool for adjusting the friction of the slip clutch. The tool is located underneath the rubber cover for easy access. FEATURES 360° fine adjustment with worm gears2x sprockets with 120 teeth eachNo axle clamp requiredSlip clutch friction systemDovetail system (compatible with the GP and Sphinx mount) Adjusts by up to 45° Mounts tubes with an aperture of up to 155 mmPACKAGE CONTENTSVixen Porta II mountAluminium tripod2 fine adjustment wheelsMounting toolStorage shelf for accessories

High-quality eyepiece for beginners who want high-quality results at an affordable price. The 2-group, 4-element Plossl lens design of the NPL eyepieces ensures clear and sharp images with good colour correction. The lenses are fully multi-coated for high light transmission, the eyepieces also offer a comfortable eye distance. In contrast to predecessor models, the chromatic aberration has been further reduced and you will be impressed by the sharpness of the edges. FEATURES Plug-in diameter: 31.7 mm Apparent field of vision: 50° Eyepoint distance: 3.0 mm Weight: 70 g WHAT’S INCLUDED 1x eyepiece 6 mm (1.25”) and protective caps

SXD2WL SD115SII Complete Telescope Set with GoTo Mount, Tripod and EyepiecesThis high-quality apochromatic refractor telescope-set impresses with its 115-mm-SD optics. The telescope is made in Japan and scores with its excellent workmanship, sharpness, and contrast performance. The advantage of this SD refractor lies in its light weight and very color-true and high-contrast imaging. You will be amazed when you use it to observe the moon surface with its craters or Saturn with its ring system. On Jupiter, on a good night, you can also see the two bright cloud bands and many smaller details as well as the great red spot on the planet. On moonless nights, you can observe the Andromeda Nebula, Orion Nebula, Eagle Nebula, Lagoon Nebula and many other interesting objects. Even weaker celestial objects become visible with this large aperture of 115 mm under a good sky.This telescope set "Made in Japan" leaves nothing to be desired. The FPL53 glass used in the telescope reproduces an extremely clear and sharp image due to exceptionally high elimination of residual color errors. The SD glass is designed to bring all rays – violet, red, blue, yellow, and green – very precisely to the same level. The special lens material thus reduces chromatic aberration across all colors. In the new Vixen SD115SII, no spacer plates are used anymore, which leads to a significantly better image quality especially with bright stars. Consequently, no spikes are seen on the stars in photographic images, which would otherwise be caused by the spacer plates.In combination with the optional SD Reducer HD Kit or SD Flattener HD (not included), this refractor telescope enables illumination with a 44-mm image circle for full-frame SLR cameras. The older ED81SII, ED103S, ED115S refractors were originally developed for visual observers and photographers with APS-C cameras. However, the new SD series is also optimized for use with full-frame cameras due to the use of new internal diaphragms. The large 60-mm eyepiece holder also allows the attachment of heavy cameras without tilting. Furthermore, the supplied flip mirror allows comfortable observing even in unfavorable viewing conditions and also provides a T2 thread for attaching a DSLR camera. So you can observe at an 90° angle or directly. The carry handle attached to the tube clamps provides safe handling during transport of the telescope. The sturdy metal tripod allows vibration-free mounting of the telescope and mount even in windy conditions. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet . For user-friendly control of the mount, the free app STAR BOOK Wireless is available. This allows you to use practical celestial navigation functions like the automatic GoTo swiveling to specific celestial objects simply via your smartphone or tablet. Since the power consumption of the traditional LCD screen (STAR BOOK TEN) is eliminated, the power consumption of the mount is reduced by up to 20%. This enables astronomical observations and astrophotography over longer periods. When you tap the desired celestial object from a list, it is automatically swiveled into the telescope's field of view and tracking begins. An existing STAR BOOK TEN control can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL sets a new standard for performance and precision in the Vixen mount family. The axis cross of the mount is with a photographic carrying capacity of 15 kg just 9.2 kg light and thus excellent for mobile observations . Moreover, the motors located in the lower part of the mount also act as counterweights. This reduces the need for additional counterweights. The SXD2 Mount in Detail Precision stepper motors and Micro-Step-Motion-Control system The heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The Micro-Step-Motion-Control system boasts powerful yet very quiet drive properties, which are present both in fine movements and in fast swivels. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much quieter than in previous models. High-precision worm gears High-precision processing technologies eliminate errors in the worm gears. The edges of both worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweight The massive motor units are built into the lower part of the declination axis, so the center of gravity of the SXD2 is below the intersection of the RA and DEC axes. This means you need fewer additional counterweights. Latitude adjustment The latitude can be adjusted between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium, and low latitudes); latitude scale in 2-degree steps; fine adjustment with a tangent screw head, approx. 0.8 degrees per rotation. Built-in PFL-II polar finder with illumination The built-in 5x20-mm polar finder with a 10° field of view features a 3-star alignment system. This eliminates the tedious setting of date and time. The illuminated reticle with variable brightness and automatic shutoff is adjustable in 8 levels and is red illuminated. The adjustment accuracy is 3 arc minutes.The Wireless Module in Detail The Vixen WiFi Adapter for EQ mounts enables you to control your Vixen mount via a smartphone or tablet. This allows you to navigate the skies wirelessly using the STAR BOOK Wireless app (free), instantly transforming your mobile device into a controller for the equatorial mount. The response delay of the mount, a major drawback of wireless connections, has been reduced to a level comparable with wired solutions. Reduced power consumption compared to conventional controls with LCD monitors The power consumption of the mount is reduced by up to 20%, thus allowing for longer observation periods than with conventional wired controls such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller The STAR BOOK Wireless App is structured similarly to the STAR BOOK TEN controller you might already be familiar with. Depending on the star chart settings, it includes up to 259,000 celestial objects. Simply tap on a celestial object in the object list to start the GoTo. The mount then automatically moves to this target and positions it within the telescope’s field of view. All the popular features of the STAR BOOK TEN are retained. Convenient operation While looking through the telescope, you control the mount by swiping on the app’s star map. With no buttons required, you simply glide your finger over the star map, allowing for easy operation of the mount. Comprehensive astronomical data included This includes data on easily observable celestial bodies such as Messier objects, NGC objects, IC objects, as well as the sun, moon, planets, comets, and dwarf planets. High-precision alignment Aligning with one or two stars already provides a fairly accurate positioning of the mount. Aligning with three or more stars allows for high-precision alignment of the mount for high magnifications. The objects are then precisely centered in your telescope’s field of view. The alignment information is stored and can be retained even when the device is turned off. By leaving the telescope in its current state after observing, without moving it, you can start the next observation with the automatic setup using the same settings. Individual setting options Like the STAR BOOK TEN controller, the app offers various individual settings such as backlash compensation, red night mode, autoguider, as well as variable GoTo speed and LED brightness. You can also set the timing of the objective tube reversal (Meridian Flip) as desired. Even if the object moves south during tracking, you can prevent the telescope tube from reversing.Important Information Not usable on old SX mounts with the old blue Star Book Technical Information on the Wifi Module CPU with a 32-bit CISC processor at 120 MHz The unit connects to the mount with a D-SUB 9PIN connector, as with the STAR BOOK TEN. It features a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems include Android 6 or later, iOS 9.0 or later, WLAN standard: IEEE 802.11b/g/n FEATURESSD115SII TelescopeLens: D=115 mm, fully multi-coated2-lens SD apochromat without spacerNo spikes on starsFocal length: 890 mm (f7.7)Resolution and limit magnitude: 1.01 arc seconds; 12.1Light gathering capacity: approximately 270x that of the human eyeDimensions and weight: 125 mm dia x 930 mm; 4.4 kg without accessoriesFinder scope: 7x50, illuminatedAdapters and connections: 60 mm thread, 50.8-mm and 31.7-mm sleeve, T-ring threadConnection: 50.8-mm and 31.7-mm sleeve with flip mirrorPhotography: Primary focus and eyepiece projection SXD2WL Mount RA gear: 180 teeth DEC gear: 180 teeth Axle material and diameter: Carbon steel / Dec. 35 mm, RA 40 mm thickness Polar finder scope: 6x20 mm, PFL-II polar finder Altitude fine adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Counterweight bar: 20 mm diameter Azimuth adjustment: worm gear fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweights: 1x 1.9 kg and 1x 3.7 kg Mounting: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN plug Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3–2.0 A (load 10 kg), 0.4–2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL MountWireless UnitCounterweights: 1.9 kg and 3.7 kgPolar finder scope, illuminatedMounting toolsCar lighter cableSD115SII Refractor TelescopeFlip mirror2 eyepieces (SLV 20, SLV 5)Tube clampsDovetail plate7x50 finder, illuminatedSXG Aluminium tripod

Astrophotographers generally use two different focal lengths: Short focal lengths for overview photos and extensive deep-sky objects, and long focal lengths for objects which are further away. Our aspherical mirror optics offer the perfect solution for these scenarios. The VISAC primary mirror (Vixen Sixth-Order Aspheric Cassegrain) is specially designed for astrophotography and provides a fully flat and true-colour image over the entire image frame. Thanks to the three-element field corrector in front of the convex secondary mirror, there is no spherical aberration, coma or field curvature. Although the device is designed for astrophotography, it is also suitable for visual observations. FEATURES Photographically optimized thanks to field flattener lens Revolutionary coating technology High light-gathering power Photographically optimised optical system Built-in field flattener lens 200 mm aperture and 1800 mm focal length Optional reducer availableBackfocus without Reducer: 142,9 mmBackfocus with Reducer: 63,5 mmWeight: 6.9 kg DELIVERY CONTENT VC200 reflector telescope Carry handle 7x50 finder scope (illuminated) Flip mirror Dovetail adapter

Convert your FL55SS fluorite refractor into a high-performance astrograph The kit includes a high-performance reducer, flattener and the ''EX TUBE 66'' extension tube, which was developed for the FL55SS Fluorite Apo Refractor and improves the photographic performance by flattening the image right up to the edges. Ultra-sharp image over the entire field of view of the DSLR full-frame sensor Designed for prime-focus photography with the FL55SS, the Flattener HD flattens the entire field of view of full-frame DSLR cameras. The 44 mm image circle covers the entire field of view of a full-frame DSLR camera. When used in combination with the HD5.5 Reducer, the focal length is reduced by 0.79x (from f5.5 to f4.3) and the illuminated area retains a diameter of 44 mm, which significantly improves the sharpness across the entire field of view of the DSLR camera. 96% illumination to the edges of the field of view The Flattener HD was specially developed for the FL55SS refractor in order to reduce light loss to a minimum. The field of view is fully illuminated up to the edges. Exceptionally high contrast The same anti-reflective AS coatings used on our high-end VSD 100 f/3.8 astrograph are also used here to provide an outstanding light transmission of 99.9% per lens surface. In addition, the matte black surface of the Reducer HD kit eliminates loss of light, ghosting and scattered light. FEATURES Ultra-sharp image over the entire field of view Reduces the focal length and flattens the image Very high light transmission (approx. 96%) AS coatings with 99.9% light transmission per lens surface Also suitable for full-frame DSLR cameras Includes 66 mm extension Reduces the aperture ratio to f4.3 Distance to chip: 63.5 mm Dimensions: 58mm x 30mm / 68mm x 45.3mm Weight: 107g / 237g DELIVERY CONTENT Reducer HD Flattener HD Extension tube Dust caps