Vixen mounting base for finder scope

​Long bracket for the Vixen 7x50 finder item # 8616.For use on the Vixen finder shoe, used on many telescopesPROPERTIESSize: 50mm × 71mm × 131mmWeight: 170 g / 6.0 ozBuilt-in spring anti-slip mechanismFor Vixen finder holdersWHAT'S INCLUDEDFinder holder with spring

Thanks to the large aperture of 50 mm, the Vixen 7x50 finder scope immediately reveals many objects that are not visible in smaller viewfinders. This makes it easy to adjust the telescope to the target object. The red illumination of the finder scope can be dimmed to different levels.The eyepiece is detachable (31.7 mm diameter) so that a CMOS camera with 31.7 mm diameter (available separately) can be attached and used as an autoguider. The eyepiece unit with crosshairs is also removable in order to use 31.7 mm diameter eyepieces (sold separately) with different focal lengths. This allows the finder scope to be operated with various magnifications.The lens is designed to be compatible with CMOS cameras. The distance between the bottom of the 31.7 mm sleeve on the camera side and the sensor surface should be approximately 17 mm. However, the focus position may vary depending on the camera, so you should adjust the guiding camera for focus before use. The focus of the optics is adjusted by rotating the lens. First, the black lock ring on the main optics must be loosened. Then, the focus can be adjusted by turning the lens mount. Please also read the operating instructions for the viewfinder and the CMOS camera used.If the focus of the viewfinder has been adjusted, the focus position must be readjusted when using the eyepiece unit.FEATURESMagnification: 7xAperture: 50 mmLenses: coatedCrosshairs: illuminated in red, dimmableDimensions: 220 mm × Ø 58 mmWeight: 467 gSCOPE OF DELIVERY7x50 viewfinderEyepiece unit with illuminationCR2032 batteryInstruction manual

The Vixen Viewfinder 7x50, with illuminated reticule is an exceptionally high quality optical finder scope, featuring 50 mm Achromatic objective. The internal crosshairs are accurately inscribed and can be illuminated with a battery-powered LED attachment, which can be varied in brightness to the user's requirements. This finder gives a field of view of 7.2° in the night sky. Please note: this finder does not come with a bracket, but will fit numerous standard finder brackets - the X000288 Vixen S 50 mm finder scope short holder, or the X000073 Vixen XY finder scope long holder are particularly recommended. FEATURES Finder with 50 mm achromatic optics Field of view: 7.2° Battery: CR2032 Dimensions: 218x53 mm Weight: 0.375 kg WHAT'S INCLUDED: Viewfinder 7x50, with illuminated reticule

This DC ring can be used to fit a 60-mm thread to a 42-mm T2 thread. It is suitable for use with T-mount adapter rings for cameras or with the Vixen T2 42–31.7 mm reducing sleeve (item no.: X002294). This means it can be used to mount DSLR cameras on the Vixen R200SS and other telescopes with 60-mm focuser.FEATURESFor fitting T-mount adapter rings for the camera Adapts to 31.7 mm when connected to the Vixen eyepiece adapter (item no.: X002294)Weight: 26 g PACKAGE CONTENTSDC ring 60 mm

Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

The AX103S is a top-of-the-range ED apochromat in the refractor series. It features a triplet ED object lens and a rear-mounted field-flattener lens. The f8.0 refractor contains a central ED lens in the objective and reduces chromatic aberration to an absolute minimum. An optional focal reducer can reduce the aperture ratio to 1:5.6 in order to provide quicker results for astrophotographers. The built-in field flattener lens provides a sharp image across the entire field of view – an essential requirement in astrophotography. The 60 mm ring on the focuser allows you to attach a 2’’ eyepiece or accessories and a camera adapter. The AX103S is specially designed for photography, but also offers stunning visual performance, especially for observing the moon and the planets. The AX 103S is corrected for full frame photography and provides razor-sharp pictures right into the corners of the image field. This telescope is guaranteed to provide a lifetime of outstanding performance! FEATURES Optimized for full frame photography Fully coated triplet ED objective with flattener Very high sharpness and contrast Optional reducer availableBackfocus without Reducer: 150.0 mmBackfocus with Reducer: 63,5 mm103 mm aperture and 825 mm focal length WHAT’S INCLUDED Telescope Tube clamps and carry handle Illuminated 7x50 viewfinder telescope Vixen's very useful Flip mirror diagonal system for finding and framing targets