Vixen Dovetail adapter base

For mounting Vixen standard dovetail rails to the mount

  • Dovetail adapter base for mounts
  • For SXP2, AXJ and AXD mounts
  • Also suitable for Guide Mount XY
  • For Vixen standard dovetail bars
  • Weight: 220 g

€59.00*

Available, delivery time: 2-4 days

Product number: X000266
GTIN/EAN: 4955295381005
WEEE-Reg.-Nr.: DE 34716369

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides von Bresser

Der Sky Guide bietet umfassende Informationen zu Sternbildern, Planetenpositionen und astronomischen Ereignissen – ideal, um Ihre Beobachtungen zu planen und noch tiefer in die Astronomie einzutauchen. 
Besuchen Sie den Guide direkt hier, um das Beste aus Ihren Beobachtungen herauszuholen!
Product information "Vixen Dovetail adapter base"
Dovetail adapter base for SXP2, AXJ and AXD mounts.
Enables attachment of Vixen standard dovetail bars to the mount.
Also suitable for Guide Mount XY


FEATURES

  • For SXP2, AXJ and AXD mounts
  • For Vixen standard dovetail bars
  • Weight: 220 g

DELIVERY CONTENT

  • Dovetail adapter base
  • Fixing and locking screw
  • Mounting screws
  • Mounting tool
Colour: white
Material: Aluminium, Plastic

Accessories

Vixen AXJ GoTo Mount with Star Book Ten Controller
Designed as a complement to the AXD2 equatorial mount, the AXJ mount offers outstanding durability and precision. The AXJ mount can also be used on AXD-TR102 tripods with an adapter. Periodic errors on mounts are usually measured and corrected by the user. Unlike the old StarBook controller, the STAR BOOK TEN controller saves these errors permanently. The periodic error of the mount is measured in the factory (total of 12 points per 30 degrees worm gear) and corrected before delivery. This is known as V-PEC and functions automatically as soon as you use the mount. It delivers an accuracy of +/- 4.0 arc seconds. You can increase the tracking accuracy further by saving your own recorded periodic errors. Vixen uses a new Belt-drive system in the AXJ mount. The gear drive was replaced with a toothed belt drive. This gives the mount a quicker reaction time and lower backlash. It also helps to minimize noise. The 6x20 polar finder scope is pre-installed. This allows the user to configure the polar alignment (for both the northern and southern hemispheres). The polar finder scope has a variable illuminated reticle with an automatic power-off function. The brightness can be adjusted in 8 levels so that the user can configure the desired brightness. SETTING ACCURACY OF LESS THAN 3 ARC MINUTES The dark field illumination (red LED) turns on when the push button is pressed. The reticle also lights up in red so that the observer can recognize and align stars in the background of the reticle. The light turns off automatically after a few minutes to save battery power. 2 bearing sets (4 pieces) are used for the shaft of the RA axis. Thanks to the newly developed EQ design, the ZXJ mount has a higher load capacity of 22 kg. As the motors, worm shaft and worm gear are located in the lower part of the mount, fewer counterweights are required than with conventional mounts. The STAR BOOK TEN controller is a modern control system with a high-resolution colour monitor. The STAR BOOK TEN system contains more than 272,000 celestial objects, including 260,000 stars from the SAO catalogue, 109 Messier objects, 7840 NGC objects and 5380 IC objects, as well the soon, moon and planets. Objects can be accessed by name, and information such as images and data can be defined separately. FEATURES +/-4.0 arc seconds with V-PEC V-PEC (Vixen-Permanent Periodic Error Correction) Belt drive system (prevents backlash and minimizes noise) 14 ball bearings Polar alignment (variable fork fix type) Polar finder with reference star alignment STAR BOOK TEN controller with autoguider input Retractable counterweight bar WHAT’S INCLUDED AXJ mount Starbook Ten controller 2 counterweights (3.7 kg and 1.5 kg) GoTo mount with Star Book Ten controller 22 kg load (photographic)

€7,499.00*

Similar products

BRESSER Universal Smartphone Adapter Deluxe
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

€21.09*
%
BRESSER Universal Smartphone Adapter
Take photos with your smartphone through your spotting scope, microscope or telescope. It’s a child's play with the BRESSER Universal Smartphone Adapter. Simply attach the adapter to the eyepiece holder of your optical device and then use all together as a telephoto lens for your smartphone camera. Now you can shoot distant objects as if they were up close or take photos through a microscope.FEATURESuniversal adapter to assemble the smartphone to a spotting scope or telescopefor eyepieces up to 68 mm diameterfor smartphones with a width of 50-88mmSCOPE OF DELIVERYSmartphone adapterManual

€30.29* €39.00* (22.33% saved)
BRESSER Binocular Tripod Adapter Deluxe, sturdy metal version
Sturdy metal tripod adapter for binoculars up to 3kg net weight. High-quality connecting element between tripod head and binocular bridge with a very stiff design.FEATURESTripod adapter Deluxe made of metalSuitable for almost all binoculars up to 3kg weightConnection element between tripod head and binocular bridgeVery elegant and rigid designTripod connection thread standard 1/4 inch photo threadBinocular connection thread standard 1/4 inch photo threadRubber-coated tripod support for non-slip fitLarge rubber-coated fixing screw for binocular bridgeOverall length: 100mm, weight: 100g, colour: blackSCOPE OF DELIVERYTripod Adapter Deluxe (1pc)

€19.90*
BRESSER T2 ring for Sony - E-mount
Connect your BRESSER Microscope or Telescope with a Sony System camera and take images or videos* of your observed object!T-Mounts are the connecting piece between the T2 camera adapter and the system camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera.The adapter will provide the necessary distance extension between the flange focal length of 18mm for E-Mount and 55mm for T2. The overall length is 37mm.For Sony NEX or ILCE cameras with E-Mount bajonet (e.g. Sony Alpha 6000, Sony A7S / A7R)SCOPE OF DELIVERYT2-Ring für Sony E-Mount camerasFor Sony NEX, ILCE Cameras (e.g. A7S, A7R)

€29.90*
%
BRESSER Adapter 2" on T2
Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.   

€21.99* €24.90* (11.69% saved)
BRESSER T2 Extension Tube Set
Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2” plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or Ritchey–Chrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter

€29.00*
BRESSER Smartphone Holder for Telescopes (1.25")
Take pictures with your smartphone through the telescope! With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto lens. It lets you take pictures of distant objects as if you were very close. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 32-34mm SCOPE OF DELIVERY Smartphone holder Locking ring for the smartphone

€9.90*
BRESSER Telescope Camera Adapter (1.25")
The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"

€39.00*
EXPLORE SCIENTIFIC Camera-Ring M48x0.75 for Canon EOS
Camera specific bayonet adapter (camera ring) for Canon EOS DSLR with M48x0.75 mm internal thread for astrophotography. By using the large thread M48x0.75 mm, the vignetting of e.g. a DSLR full format sensor is effectively avoided. Compared to the small T2 thread M42x0.75, this adapter has a free inner diameter of 47.5 mm. This camera ring is made of matt black anodised aluminium and weighs only 40 grams. The light path (overall length) is 10.0 mm. FEATURES Camera-specific bayonet adapter Canon EOS Large female thread M48x0.75 mm Free inner diameter of 47,5mm No vignetting for full format sensors Light path (overall length) is 10.0 mm Made of matt black anodized aluminium Weight only 40 grams SCOPE OF DELIVERY Camera ring for Canon EOS (1 piece)

€24.90*
BRESSER BR-BHS Ball Head for Lightstand
This is a universal ball head that can be mounted on a spigot connector of a lamp stand. The lamps or the accessories can be aligned in any position. A 1/4 thread is attached to the top of the adapter to provide additional accessories. FEATURESHeight: 9 cmUniversal ball headSCOPE OF DELIVERYball head

€9.95*
BRESSER Camera-Adapter M35/T2 for MC/MCX100/127
Camera-Adapter M35/T2 for Bresser MC/MCX-100 and MC/MCX-127 Maksutov telescopes The BRESSER Camera-Adapter M35/T2 for MC/MCX100/127 is principally designed to connect a DSLR camera (with appropriate manufacturer-specific T2 T-ring, available separately) to the Bresser MC-100 and MC-127 Maksutov telescopes which have a built-in M35 connecting thread. You can also use wider-bodied astronomical cameras (non-c-mount), which have T2 threads built into their bodies, as standard with this camera adapter. This adapter can be separated into two different lengths of 30mm and 80mm (which both truncate in a T2/M42 thread). The use of these different lengths of extension tube allows the user to vary the projection of image on to a camera chip and get the best framing for the size of object being imaged. Please note: an extra camera specific T2-adapter ring (Canon, Nikon, Sony, etc.) is necessary to connect a DSLR.  Many of these are available from us and you are welcome to contact us for advice if unsure which of these to pick.WHAT'S INCLUDED Camera-Adapter with M35x1,0mm to M42x0.75mm (T2) thread

€49.00*
Camera Bajonet Adapter Canon R/RP to T2/M42 thread
T-Mounts / Bajonet adapters are the connecting piece between the photo adapter and the camera. Please read the instruction manual of your camera to find out which T-Mount / Bajonet adapter you need, look into the instruction manual of your camera. Connect your BRESSER Microscope or Telescope with a Canon R/RP camera and take images or videos of your observed object!FEATURESCapture photos through your telescope or microscopeConnecting piece between the photo adapter and Canon R/RP cameraHigh-quality and precise workmanship made of metalA corresponding photo adapter is neededConnecting thread: T2 / M42x0.75 femaleOptical path: 10.0 mmSCOPE OF DELIVERYT2 Ring / Bajonettadapter for Canon EOS R/RP

€24.99*

Customers also bought

Vixen SG-L02 Headlamp red-light white-light
The perfect LED head torch for nighttime observations! Adjusting your eyes to the dark surroundings is very important when making astronomical observations. In dark areas, it is very difficult to use astronomical equipment without a suitable light. With normal lights, however, the light intensity is more important than protecting your eyes against bright light. Using these lights at night makes your pupils contract, which can make it difficult for your eyes to readjust to the darkness. The SG-L01, our first astronomy LED lamp, featured a built-in red LED that provided a solution to this problem. However, the red light did not offer optimal visibility. On our new astronomy LED light, the SG-L02, the LED lights produce warm light to improve visibility. They also ensure that your eyes stay adapted to the dark. The LEDs do not emit light in the sensitive range of 555 nm. The brightness of the white light can be adjusted between 3 and 42 lumen, while the red light can be adjusted between 0.28 and 7.62 lumen. FEATURES Dimmable red light ensures that your eyes stay adapted to the dark Built-in rechargeable battery, charges via USB Waterproof design LED colour can be switched from red to white 0.28 to 7.62 lumen for red light 3 to 42 lumen for white light Dimensions: 41 mm x 33 mm x 30 mm Weight: 29 g DELIVERY CONTENT SG-L02 head torch Strap (size S) Strap (size L) Pocket clip Cable for charging the battery (USB-A plug to USB Micro-B plug)

€69.00*
Vixen counterweight 2.8 kg
2.8-kg counterweight for mount counterweight barsUse counterweights to balance your mount. Multiple counterweights may be required depending on the telescope.FEATURESSuitable for SX, SXD, GP2 and GPD2 mountsWeight: 2,800 gPACKAGE CONTENTS2.8-kg counterweight

€62.00*
Vixen ASG-CB90 Carbon Tripod
Despite being developed for heavy mounts, the Vixen ASG CB90 carbon tripod is one of the lightest tripods on the market. The ASG CB90 tripod was originally designed for the new AXJ mount. However, it is also ideally suited to the tried-and-tested SX, HF2, AP, GPD2 and GP2 mounts. The hand nuts can be loosened to extend the tripod by one section. The legs of the ASG CB90 tripod can be secured by a reliable screw cap and are equipped with a 2.5 cm interval scale marking. FEATURES 2-section carbon tripodLightweight and portable Stable design with minimal vibrationsDimensions: 545 mm to 900 mm length Connections: 45 mm pin hole Weight: 3.4 kg WHAT’S INCLUDED Carbon tripod

€535.00*