Vixen counterweight, 7 kg, for AXD and AXJ mounts

Compensates the weight of large telescopes on the Vixen mounts AXD, AXD2, and AXJ

  • Counterweight for AXD/AXJ mounts
  • For balancing the mount with heavy telescopes
  • Weight: 7 kg

€155.00*

Available, delivery time: 1-3 days

Product number: X000106
GTIN/EAN: 4955295369140
WEEE-Reg.-Nr.: DE 34716369

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "Vixen counterweight, 7 kg, for AXD and AXJ mounts"
7 kg counterweight for balancing the mount with heavy telescopes
Suitable for AXD, AXD2 and AXJ mounts


FEATURES

  • Counterweight for AXD/AXJ mounts
  • Weight: 7 kg

DELIVERY CONTENT

  • 7 kg counterweight
  • Clamp screw
Colour: white
Material: Aluminium
Net Weight total (incl. accessories) (in kg): 7

Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.

Accessories

%
AXD counterweight, 1.5 kg
AXD counterweight, 1.5 kg, for AXD mountsFEATURESAXD counterweight, 1.5 kg, for AXD and AXJ mountsFor balancing the mountWeight: 1.5 kgDELIVERY CONTENT1.5 kg counterweightClamp screw

€54.00* €68.00* (20.59% saved)
Vixen 3.5 kg Counterweight for AXD Equatorial Mount
Vixen 3.5 kg counterweight for AXD, AXD2 and AXJ mountsBalances the mount on heavy telescopes FEATURESCounterweight for AXD mountsWeight: 3.5 kgDELIVERY CONTENT3.5 kg counterweightClamp screw

€129.00*
%
Vixen AXD Adapter Plate
Adapter plate for AXD and AXD2 mounts.This plate allows you to attach two telescopic tubes next to each other, e.g. for a guide scope.For mounting a guide scope, we recommend item no. X000097 (GuideMount XY)FEATURES For securing guide scopesDimensions: 400 mm x 200 mm x 15 mm Weight: 2.9 kgDELIVERY CONTENTAXD adapter plateMounting screwsMounting tool

€279.00* €349.00* (20.06% saved)

Similar products

BRESSER Counterbalance 4,5kg for EXOS-2/EQ5
Additional counterweight to balance heavy accessories etc.

€39.90*
BRESSER Counterbalance 2.0 kg for EXOS-1 + 2
Additional counterweight to balance heavy accessories etc.FEATUREScolor matched with the Bresser EXOS-1/2 seriessuitable for counterbalance bar with 20mm diameterSCOPE OF DELIVERY1x counterbalance 2.0kg

€29.90*
Vixen AP Photo Guider Shaft
The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw

€52.00*
EXPLORE SCIENTIFIC Truss Dob Counter Weight Set
Counter Weight Set to retrofit all Explore Scientific Dobson Telescopes. Get your telescope perfectly balanced even you are using heavy eyepiece with coma corrector, a binoviewer or big finder scopes. The counter-weight rod has 14,0 mm in diameter. The fixing thread is a metric M10 with hex nut. Delievery content:2 x Counter weight each 1.0kg1 x Counter weight rod 1 x Mounting material

€40.90*
Vixen Counterweight 1.0kg
For balancing the Polarie Star Tracker in connection with the counterweight bar. The counterweight of 1.0 kg is also compatible with GP, SX mounts and mounts with 20 mm counterweight bar PROPERTIES Suitable for Polarie Star Tracker, GP, SX and AP mount For counterweight rods with a diameter of 20 mm Weight: 1.0 kg WHAT'S INCLUDED Weight: 1.0 kg Locking Bolt

€46.00*
Vixen Counterweight 1.9kg
With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

€52.00*
Vixen counterweight 2.8 kg
2.8-kg counterweight for mount counterweight barsUse counterweights to balance your mount. Multiple counterweights may be required depending on the telescope.FEATURESSuitable for SX, SXD, GP2 and GPD2 mountsWeight: 2,800 gPACKAGE CONTENTS2.8-kg counterweight

€62.00*
EXPLORE SCIENTIFIC Counter Weight 1.0 kg for iEXOS-100 Mount
Additional Counter Weight 1.0 kg for EXPLORE SCIENTIFIC iEXOS-100 PMC-Eight Wifi Goto Mount to balance also larger telescope tubes.FEATURESAdditional counter weightBalance also larger telescope tubesFits to iEXOS-100 MountTotal weight: 1.0kgDiameter: 80mm; height: 30mmBore diameter: 14.7mmSCOPE OF DELIVERYCounter weight 1.0kg (1 pc)

€31.00*
Vixen counterweight 3.7 kg
The 3.7-kg counterweight can be attached to the counterweight bar to balance your mount. Depending on the telescope, multiple weights may be required. The counterweight is suitable for Vixen SX, SXD, SXP2, GP2, GPD2 and AP mounts.FEATURESSuitable for SX, SXD, SXP2, GP2, GPD2 and AP mountsWeight: 3,700 gPACKAGE CONTENTS3.7-kg counterweight

€73.00*
%
Vixen AP Conterweight Bar
Counterweight bar, which is delivered with the AP-mount and AP-SM mount. It is designed for balancing an optical tube after being secured with a counterweight and installed on the declination body. It can used with the APZ Alt-Az mount.FEATURES Diameter of bar: Diameter: Dia. 20 mm Dimensions: 78×328 mm Effective bar length: 269 mm Weight: 820 g Compatible counterweights: 1 kg, 1.9 kg, 2.8 kg, 3.7 kg

€44.00* €55.00* (20% saved)
Vixen 3.5 kg Counterweight for AXD Equatorial Mount
Vixen 3.5 kg counterweight for AXD, AXD2 and AXJ mountsBalances the mount on heavy telescopes FEATURESCounterweight for AXD mountsWeight: 3.5 kgDELIVERY CONTENT3.5 kg counterweightClamp screw

€129.00*
%
AXD counterweight, 1.5 kg
AXD counterweight, 1.5 kg, for AXD mountsFEATURESAXD counterweight, 1.5 kg, for AXD and AXJ mountsFor balancing the mountWeight: 1.5 kgDELIVERY CONTENT1.5 kg counterweightClamp screw

€54.00* €68.00* (20.59% saved)