Vixen Counterweight 1.0kg

1 kg counterweight from Vixen for POLARIE Star Tracker, GP, SX, and AP mounts

  • 1.0 kg counterweight for the counterweight rod
  • Suitable for Polarie Star Tracker, GP, SX and AP mount
  • For counterweight bars with a diameter of 20 mm
  • Weight: 1kg

€29.00*

% €46.00* (36.96% saved)

Available, delivery time: 2-4 days

Product number: X000033
GTIN/EAN: 4955295258017
WEEE-Reg.-Nr.: DE 34716369

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "Vixen Counterweight 1.0kg"
For balancing the Polarie Star Tracker in connection with the counterweight bar. The counterweight of 1.0 kg is also compatible with GP, SX mounts and mounts with 20 mm counterweight bar

PROPERTIES

  • Suitable for Polarie Star Tracker, GP, SX and AP mount
  • For counterweight rods with a diameter of 20 mm
  • Weight: 1.0 kg

WHAT'S INCLUDED

  • Weight: 1.0 kg
  • Locking Bolt
Batteries required: false
Colour: white
Material: Aluminium

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.

Accessories

Vixen Polarie Star Tracker Camera Mount for Astrophotography
The Vixen POLARIE is a new camera accessory, that enables you to capture sharp, point-like images of the stars. It has been developed to track the stars and to compensate for the movement of the earth. POLARIE enables you to take atmospheric shots of landscapes and the night sky and can also capture these in sharp images. Extremely simple and compact design for use in every location on earth. If you have ever viewed a romantic, starry sky, you will surely have felt the desire to capture it on film. But if you have tried to do this, you will know that it’s really not all that easy. This is because you need to have multiple exposures of several minutes if you want to photograph the stars. As our earth is always turning on its axis, the stars keep moving as time passes and become long strokes on photographs. Today’s digital technology gives us the option of obtaining shorter exposure times by increasing the sensitivity of the sensor, but, unfortunately, this dramatically increases picture noise and the picture becomes very noisy and ugly. This makes it impossible to take beautiful images of the night sky. For this reason, the Vixen company has developed the Polarie Star Tracker, which eliminates the problem of star migration. When you attach your camera to the Polarie, the device will track in the opposite direction of earth’s rotation and this allows for sharp, point-like images of the starry sky even when using long exposure times. POLARIE is a new and unique camera accessory for photographing the night sky, with perfectly point-like stars being tracked. Using the simplest solution, it makes the experience of photographing the night sky more accessible for everyone. The multi-functional mode dial is adjustable for sky- and landscape-, moon-, sun- and star-tracking. Polar altimeter for a fast focus. Also included: USB connection for external power supply and a built-in compass for quick orientation. Available as optional extra accessories are a polar finder telescope for exact alignment with the celestial pole for long-exposure photography including into the telephoto range, and a tripod. FEATURES Tracking speed: Sidereal, 0.5x sidereal, sun, moon Fine adjustment: F57, 6mm worm wheel with 144 teeth Polar axis: F 40mm, aluminium alloy Drive: High-precision stepper motor: Bearing capacity: approx. 2kg incl. ball head Orientation aperture: Field of vision 8.9° vInclinometer: 0° to 70° Miscellaneous: Built-in compass (removable) Power supply: 2x AA batteries (compatible with alkaline, Ni-MH, Ni-CD batteries) or external power supply compatible with USB mini-B Drive voltage: AA batteries: DC2,4-3.0V, Max. 0.6A External power supply: DC4,4-5,25V, max. 0.3A Operating time: approx. 2 hours with alkaline batteries Approx. 20 hours with external power supply at 20°C with 2 kg load Operating temperature: 0° to 40° Dimensions: 95mm x 137mm x 58mm Weight: 740g without batteries Optional accessories available: Polar finder telescope, M-155 tripod, QPL compass, ball head WHAT’S INCLUDED 1x camera mount

€419.00*
Vixen Dovetail Slide Bar DD for POLARIE Star Tracker Astrophotography Mount
The DD dovetail mount was developed for the POLARIE multi-mounting block to attach camera equipment - from DSLR cameras, to telephoto lenses or even compact telescopes. Using this accessory, the load capacity of the POLARIE Star Tracker is increased to up to 6 kg. To make it easier to find the Pole Star, there is a wide slot in the dovetail for the polar finder. In addition to the regular accessories, two cameras can also be balanced on both sides of the existing photo thread (1/4 inch) with optional ball heads. PROPERTIES Accessories for the POLARIE multi-mounting block Allows you to balance the camera Increases the load capacity of the POLARIE Star Tracker to 6 kg Allows a counterweight to be attached Hole bores 1x 1/4 inch, 1x 1/4 inch external thread, 2xM6 internal thread on the plate WHAT'S INCLUDED Dovetail rail DD

€105.00*
Vixen AP Photo Guider Shaft
The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw

€52.00*
Vixen POLARIE Multi Mounting Block
The Vixen POLARIE Multi Mounting Block was developed to fit Vixen profile dovetail rails, such as the Vixen Dovetail Slide Bar DD, to the Polarie Star Tracker. In this way you can increase the load capacity of the tracker up to 6.5 kg! By releasing the clamping lever on the multiple assembly block, you can move the dovetail freely and clamp it again, making balancing of your camera or telescope rig an easy task. The hole in the middle of the multiple mounting block enables the photographer to carry out the polar alignment without removing the POLARIE polar finder PFL with the dovetail rail DD or the dovetail rail PG. Using one of these combinations, you can easily put deep sky photography into practice with a telephoto lens, or compact telescope. PROPERTIES Allows the inclusion of dovetail rails The Star Tracker can hold up to 6.5 kg in weight Allows the use of telephoto lenses Polar alignment possible without removing the polar finder Weight: 440g WHAT'S INCLUDED POLARIE multiple assembly block Assembly tool

€159.00*
Vixen Quick Release Panorama Plate
Attachment plates, such as the ARCA SWISS are compatible with this quick-release panorama plate. (Note: angle plate is not included in # 35527). The base of the Vixen Quick Release Panorama Clamp can be rotated 360 degrees so that the position of the mounted camera system can be adjusted simply by loosening the clamping lever. In addition to the recommended Vixen dovetail bar DD and top plate, the camera mount is also compatible with other devices with 1/4 ", 3/8" inch screws. The recommended accessory is the X000096 Angle L Bracket for portrait and landscape photography. PROPERTIES Can be rotated 360 degrees ARCA SWISS compatible Weight: 320g WHAT'S INCLUDED Quick-release panorama plate Screws and tools

€105.00*

Similar products

BRESSER Counterbalance 4,5kg for EXOS-2/EQ5
Additional counterweight to balance heavy accessories etc.

€39.90*
BRESSER Counterbalance 2.0 kg for EXOS-1 + 2
Additional counterweight to balance heavy accessories etc.FEATUREScolor matched with the Bresser EXOS-1/2 seriessuitable for counterbalance bar with 20mm diameterSCOPE OF DELIVERY1x counterbalance 2.0kg

€29.90*
EXPLORE SCIENTIFIC Counter Weight 1.0 kg for iEXOS-100 Mount
Additional Counter Weight 1.0 kg for EXPLORE SCIENTIFIC iEXOS-100 PMC-Eight Wifi Goto Mount to balance also larger telescope tubes.FEATURESAdditional counter weightBalance also larger telescope tubesFits to iEXOS-100 MountTotal weight: 1.0kgDiameter: 80mm; height: 30mmBore diameter: 14.7mmSCOPE OF DELIVERYCounter weight 1.0kg (1 pc)

€31.00*
EXPLORE SCIENTIFIC Truss Dob Counter Weight Set
Counter Weight Set to retrofit all Explore Scientific Dobson Telescopes. Get your telescope perfectly balanced even you are using heavy eyepiece with coma corrector, a binoviewer or big finder scopes. The counter-weight rod has 14,0 mm in diameter. The fixing thread is a metric M10 with hex nut. Delievery content:2 x Counter weight each 1.0kg1 x Counter weight rod 1 x Mounting material

€34.00*
Vixen AP Photo Guider Shaft
The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw

€52.00*
Vixen counterweight 2.8 kg
2.8-kg counterweight for mount counterweight barsUse counterweights to balance your mount. Multiple counterweights may be required depending on the telescope.FEATURESSuitable for SX, SXD, GP2 and GPD2 mountsWeight: 2,800 gPACKAGE CONTENTS2.8-kg counterweight

€62.00*
Vixen Counterweight 1.9kg
With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

€52.00*
%
Vixen AP Conterweight Bar
Counterweight bar, which is delivered with the AP-mount and AP-SM mount. It is designed for balancing an optical tube after being secured with a counterweight and installed on the declination body. It can used with the APZ Alt-Az mount.FEATURES Diameter of bar: Diameter: Dia. 20 mm Dimensions: 78×328 mm Effective bar length: 269 mm Weight: 820 g Compatible counterweights: 1 kg, 1.9 kg, 2.8 kg, 3.7 kg

€44.00* €55.00* (20% saved)
%
Vixen counterweight 3.7 kg
The 3.7-kg counterweight can be attached to the counterweight bar to balance your mount. Depending on the telescope, multiple weights may be required. The counterweight is suitable for Vixen SX, SXD, SXP2, GP2, GPD2 and AP mounts.FEATURESSuitable for SX, SXD, SXP2, GP2, GPD2 and AP mountsWeight: 3,700 gPACKAGE CONTENTS3.7-kg counterweight

€49.00* €73.00* (32.88% saved)
Vixen counterweight, 7 kg, for AXD and AXJ mounts
7 kg counterweight for balancing the mount with heavy telescopesSuitable for AXD, AXD2 and AXJ mountsFEATURES Counterweight for AXD/AXJ mounts Weight: 7 kgDELIVERY CONTENT7 kg counterweightClamp screw

€155.00*
%
Vixen 3.5 kg Counterweight for AXD Equatorial Mount
Vixen 3.5 kg counterweight for AXD, AXD2 and AXJ mountsBalances the mount on heavy telescopes FEATURESCounterweight for AXD mountsWeight: 3.5 kgDELIVERY CONTENT3.5 kg counterweightClamp screw

€89.00* €129.00* (31.01% saved)
%
AXD counterweight, 1.5 kg
AXD counterweight, 1.5 kg, for AXD mountsFEATURESAXD counterweight, 1.5 kg, for AXD and AXJ mountsFor balancing the mountWeight: 1.5 kgDELIVERY CONTENT1.5 kg counterweightClamp screw

€54.00* €68.00* (20.59% saved)

Customers also bought

Vixen AP Photo Guider Shaft
The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw

€52.00*
Vixen Dovetail Slide Bar DD for POLARIE Star Tracker Astrophotography Mount
The DD dovetail mount was developed for the POLARIE multi-mounting block to attach camera equipment - from DSLR cameras, to telephoto lenses or even compact telescopes. Using this accessory, the load capacity of the POLARIE Star Tracker is increased to up to 6 kg. To make it easier to find the Pole Star, there is a wide slot in the dovetail for the polar finder. In addition to the regular accessories, two cameras can also be balanced on both sides of the existing photo thread (1/4 inch) with optional ball heads. PROPERTIES Accessories for the POLARIE multi-mounting block Allows you to balance the camera Increases the load capacity of the POLARIE Star Tracker to 6 kg Allows a counterweight to be attached Hole bores 1x 1/4 inch, 1x 1/4 inch external thread, 2xM6 internal thread on the plate WHAT'S INCLUDED Dovetail rail DD

€105.00*
Vixen POLARIE Multi Mounting Block
The Vixen POLARIE Multi Mounting Block was developed to fit Vixen profile dovetail rails, such as the Vixen Dovetail Slide Bar DD, to the Polarie Star Tracker. In this way you can increase the load capacity of the tracker up to 6.5 kg! By releasing the clamping lever on the multiple assembly block, you can move the dovetail freely and clamp it again, making balancing of your camera or telescope rig an easy task. The hole in the middle of the multiple mounting block enables the photographer to carry out the polar alignment without removing the POLARIE polar finder PFL with the dovetail rail DD or the dovetail rail PG. Using one of these combinations, you can easily put deep sky photography into practice with a telephoto lens, or compact telescope. PROPERTIES Allows the inclusion of dovetail rails The Star Tracker can hold up to 6.5 kg in weight Allows the use of telephoto lenses Polar alignment possible without removing the polar finder Weight: 440g WHAT'S INCLUDED POLARIE multiple assembly block Assembly tool

€159.00*
Vixen Pole finder bracket for Polarie U Star Tracker
​With this pole finder mount you can connect existing polar finders from your AP or SX mount to your Polarie U Star tracker.The polar finder is simply screwed into the thread of the mount and the screw of the mount is fixed to the Polarie U Star tracker. This is a cost-effective solution to attach existing polar finders to the Polarie U Star Tracker. Usable polar finders are those of the SX, SXD, SX2, SXD2, AP, SXP, SXP2, AXJ, AXD and AXD2. Note: It is also possible to use it with a Polarie pole finder if the chrome-plated part, which is inserted into the hole of the Polarie Star Tracker, is unscrewed. FEATURESPolar finder mount for Polarie U Star TrackerCan be used with: SX, SXD, SX2, SXD2, AP, SXP, SXP2, AXJ, AXD and AXD2 pole findersLimited use with: Polarie pole finder (small modification required)Allows exact pole alignmentSCOPE OF DELIVERYBracket for polar viewfinderMounting screw

€59.00*
Vixen polar meter QPL Compass for Polar Star Alignment
This accessory includes a compass with a spirit level and a height scale. The compass helps you to quickly locate the polar star when it is hidden behind trees or a mountain. The compass attaches to the accessory shoe on the Polarie Star Tracker or a device with a camera accessory shoe. FEATURES Compass Oil-filled compass Azimuth dimensions: 1° steps Height adjustment: 5° steps (max. +/- 70°) Markings: marked with luminous paint Spirit level: Built-in spirit level DELIVERY CONTENTS QPL compass

€49.00*
Vixen rigid Accessory Tray for HAL130 and Porta II Tripods
The Vixen rigid Accessory Tray for HAL130 and Porta II Tripods offers practical storage space for eyepieces and various accessories.It also improves the overall stability of the tripod.The tray can be used on the HAL130 and SXG HAL 130 for GP and SX, as well as on the Porta II tripod.PROPERTIESFor eyepieces and various accessoriesIncreases the stability of the tripodsCan be used on HAL130, SXG HAL 130 and Porta tripodsWHAT'S INCLUDEDTray for tripodsScrew set 

€29.00*

Customers also viewed

Vixen Dual Slide Dovetail Bar
Universal dovetail bar for Vixen and ARCA-SWISS standard clampsThe Vixen Dual Slide Dovetail Bar can be attached to mounts with the Vixen dovetail standard as well as to narrow profiles such as the popular ARCA-SWISS standard. This rail is therefore not only suitable for mounts but can also be used on many items from the photo accessories range. With the optional quick-release fastener (item No.: X035438 - Vixen Dovetail adapter with quick-release fastener) the rail can also be attached to a camera tripod. With the optional quick-release panorama clamp (item No.: X000096 - Vixen Quick Release Panorama Plate) and an additional counterweight rod, you can, for example, attach a telephoto lens to the POLARIE U. A spotting scope can also be attached quickly and securely to an astronomical mount.FEATURES    Screw connection holes: 1/4 inch thread 3x, 3/8 inch thread 1x, M6 thread 4x lateral    Compatibility: Vixen and ARCA-SWISS standard    Material: Aluminum    Dimensions: 182 x 42 x 15 mm    Weight: 178 gSCOPE OF DELIVERY    Vixen Dual Slide Dovetail Bar

€49.00*