Vixen AP-SM Mount with RA Motor Module and Star Book One Controller

The modular AP mounting system was specially developed for travel astronomy, can be completely disassembled and modularly expanded

  • Collapsible travel mount with manual fine adjustment
  • The modular system can be dismantled in a few simple steps
  • Ideal for air travel
  • Built-in slip clutch mechanism
  • Load capacity of up to 6 kg
  • Lightweight and portable
  • STARBOOK ONE controller
  • Automatic tracking in right ascension
  • Can be upgraded with a DC motor module
  • Dimensions: 263 x 302 x 96 mm

€1,299.00*

Available, delivery time: 1-3 days

Product number: X000177
GTIN/EAN: 4955295399734
WEEE-Reg.-Nr.: DE 34716369

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides von Bresser

Der Sky Guide bietet umfassende Informationen zu Sternbildern, Planetenpositionen und astronomischen Ereignissen – ideal, um Ihre Beobachtungen zu planen und noch tiefer in die Astronomie einzutauchen. 
Besuchen Sie den Guide direkt hier, um das Beste aus Ihren Beobachtungen herauszuholen!
Product information "Vixen AP-SM Mount with RA Motor Module and Star Book One Controller"
The AP-SM mount is an enhancement of the AP mount. Unlike the AP mount, it has an RA motor and is equipped with the STARBOOK ONE controller.

The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be adjusted quicky to the target object.

There is a wide range of optional accessories. The ADVANCED POLARIS mount is ideal for both beginners and advanced observers who require a lightweight travel mount.

STYLISH DESIGN
The AP mount features an ultra-smooth finish without any projecting parts. Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps!

QUICK POLAR ALIGNMENT
The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings.

OPTIONAL POLAR FINDER SCOPE
The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power.

POWER SUPPLY
The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions.

STAR BOOK ONE CONTROLLER
The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time-lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light.

FEATURES
  • R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth
  • DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth
  • Azimuthal adjustment: Twin adjusting screws
  • Altitude adjustment: Twin adjusting screws
  • Number of ball bearings: 7
  • Polar finder: Optional
  • Motor: RA stepper motor
  • Tracking: STAR BOOK ONE (max. 60x Slewing)
  • Power supply: USB Micro-B
  • Counterweight bar: 20 mm

WHAT’S INCLUDED
  • AP-SM mount
  • 1.0 kg counterweight
  • STARBOOK ONE controller
Colour: silver/white
Material: Aluminium, Steel
Mount Type [Telescopes]: German/Equatorial Mount

Accessories

Vixen DEC Motor Module
The DEC motor module from Vixen allows the declination axis to be controlled by a motor in conjunction with the RA motor module #25804. This makes it possible to make fine adjustments without touching the mount. This is essential for astrophotography with longer exposure times and focal lengths.FEATURESMotorised fine adjustments of the DC axis Ideal for astrophotography For retrofitting an AP mountDELIVERY CONTENTMotor moduleHex keyScrews

€319.00*
Vixen APP-TL130 Tripod for AP, GPD & SX Mounts
The APP-TL130 tripod is a lightweight, portable tripod for all standard Vixen mounts with a 45 mm support. Compatible tripods include the Vixen HF2, SX, AP and AXJ mounts. The tripod is adjustable in 3 sections and can be retracted to a very small size. Weighing just 3 kg, it is ideal for astronomy trips. FEATURES Leg section: 3x extendable Maximum extended height: 1296 mm Minimum retracted height: 598.4 mm Material: Aluminium Weight: 3.0 kg Maximum height: 1159 mm (height above the ground) Minimum height: 526 mm (height above the ground) WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

€209.00*
Vixen SXG Half Pillar for GP, AP & SX Mounts
For mounting a GP2, GPD2, SX or AP mount with 45mm base on the SXG or AP tripod. Prevents long telescopic tubes from hitting the mount. FEATURES Suitable for SX, SXD2, SXP, GP2, GPD2, SKYPOD, HF2 GPD and GP mounts with 45mm connectorHeight 207mm Diameter 130mmWeight 1,8 kg SCOPE OF DELIVERY Half PillarAdjustable pivot for GP2, GPD2, AP and SX mounts

€199.00*
Vixen SXG-HAL130 Aluminum Tripod for GP, SX & AP Mounts
High-quality, stable aluminium tripod for a variety of mounts with 45 mm connections. The aluminium profile ensures firm positioning with a minimum amount of vibration. Suitable for GP2, GPD2, AP, SX, SXP, SXP2 and AXJ mounts or similar with 45 mm connections. FEATURES Robust aluminium tripod without mount Suitable for: GP-, SX- & AP mounts Height-adjustable: 81 - 130 cm Weight: 5.5 kg WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

€276.00*
Carry bag for AP mounts
Sturdy case for AP, AP-SM and APZ mounts and individual accessory modules.The outer side is equipped with a reflector strip to improve visibility in the dark.The inside of the case features elastic straps for securing accessories.FEATURES Tailor-made case for AP mountsElastic straps inside case for securing accessoriesSeparate compartments keep the mount separate from the accessoriesThe outer side is equipped with a reflector strip to improve visibility in the darkDELIVERY CONTENTAP carry case

€105.00*
Vixen AP mount base
​​The Vixen AP mount base is used to convert the AP and AP-SM mount to a full APZ altazimuth mount.If you already own an AP or AP-SM mount, the parallactic mounts can be converted into an APZ mount with 8 kg load capacity in just a few steps. Thanks to the modular mounting system, any existing motor modules with controls can also be used. The AP mount base has the same connection thread as your AP mount and can therefore be used on the same tripods.FEATURESAllows the conversion of the AP and AP-SM to the APZ mount Same tripod connection as the AP mounts Allows 8 kg load capacityConverted in a few simple steps SCOPE OF DELIVERYVixen AP mount base Assembly tool

€119.00*
Vixen Polarscope PF-L II for AP & SX Mounts
Vixen’s latest design of polar finder, allows a simple, hassle-free method of polar alignment. The Vixen Polarscope PF-L II for AP & SX mounts has a reticule showing the Pole star (Polaris) and two other stars (Delta UMi and 51 Cep) in their precise positions. By turning the Polarscope you can easily match the reticle with the asterism of these stars in the sky and mechanically adjust your mount’s azimuth and altitude axes to align to the true North Pole. You can then adjust the Polar star to a more precise alignment using the reticule’s year marking (which runs from 2015 to 2040, but in practise can be used much longer after this) . Using this alignment process, with visual reference to the actual stars in the sky, a complicated alignment, using date and time to calculate Polaris offset from the pole is unnecessary. For alignment in the Southern Hemisphere you simply use the Trapezium asterism (Sigma, Chi, Tau and Upsilon Octantis) of the constellation Octans and position the reticule with the trapezium stars aligned to their marked positions. The Polarscope has built-in LED illumination, which is dimmable in many stages, and ensures an automatic shut-off after 2 minutes, saving your battery life. The PFL-II also has an improved edge sharpness, when compared with its predecessor. FEATURES Lighting: LED illumination, with automatic shut-off Power supply: 3v button cell Accuracy: ≤ 3 arc minutes Dimensions: 47 x 55 x 127 mm Weight: 155g Compatibility: Vixen AP, SX, AXJ, AXD Mounts SCOPE OF DELIVERY PF-L II Allen key Battery CR2032 3v

€275.00*
Vixen SD81SII Telescope OTA
A new 81 mm apochromatic refractor with high-performance Super ED glass (= SD). The advantage of these SD refractors is their short length and low weight.The FPL53 glass reproduces an extremely clear and sharp image due to an exceptionally high elimination of residual colour errors. The SD glass is designed to bring all rays of violet, red, blue, yellow and green together very precisely on the same plane. Thus, the special lens material reduces chromatic aberration across all colours.The new Vixen SD81SII no longer uses spacer plates, which leads to significantly better image quality, especially with bright stars. This means that there are no more spikes on the stars in photographic images, which were otherwise produced by the spacer plates. You will be thrilled when you look at the moon or the brighter planets and observe the moon craters pin sharp and with an extremely high contrast. Observe the ring planet Saturn or the cloud bands on Jupiter.But of course, brighter deep sky objects such as the Orion Nebula or the Andromeda Galaxy can also be observed impressively.In combination with the new optional SD Reducer HD Kit or SD Flattener HD, this refractor allows illumination with a 44 mm image circle for full-frame SLR cameras.The older ED81SII, ED103S, ED115S refractors were originally designed for the visual observer or the photographer using APS-C cameras. However, the new SD series has been optimised for use with full-frame cameras by inserting new inner baffle rings.The large 60 mm focuser allows heavy cameras to be attached without tilting. The supplied flip mirror allows comfortable observation, even in unfavourable observation situations, and also offers a T2 thread for connecting a DSLR camera.Thus, observing in degree view or at a 90° angle is possible. The carrying handle attached to the tube clamps ensures a secure hold when transporting the telescope.FEATURESObjective Lens: D=81 mm, multi-coated 2-Lens SD Apochromat without spacer plates No more spikes on the stars Focal Length: 625 mm (f7.7) Resolution and visual limit: 1.43 arcseconds; 11.3 Mag Light gathering capacity: 134x unaided eyesDimensions and weight: 90 mm dia x 585 mm, 3.6 kg Finderscope: XY Red Dot Finder II Adapter and connections: Adapter thread 60 mm and 31.7 mm for T2-ringConnection 50.8 mm and 31.7 mm socket with flip-mirror diagonal mirrorPhotography: primary focus and eyepiece projection SCOPE OF DELIVERY Refractor telescope SD81SII Tube rings Flip mirror system Carrying handle Dovetail rail Red dot viewfinder

€1,349.00*
%
Vixen A80Mf optical Tube
The A80Mf refractor is an ideal entry-level model for beginner astronomers who value high-quality optics. Thanks to Vixen’s quality controls, the 80 mm lenses are produced to an outstanding quality. The refractor comes with two Plössl eyepieces (6.3 mm and 20 mm) and a 90° star diagonal. The A80Mf is ideal for exploring the moon and the brighter planets. On moonless nights you can observe the Andromeda Galaxy or Orion’s Nebula. The 6x24 viewfinder makes locating celestial objects quick and easy. We recommend using this product with the optional Porta II mount. The mount is lightweight, stable and easy to use. FEATURES Objective lenses: 80 mm achromat, coated Focal length: 910 mm (f11.4) Resolution and limiting magnitude: 1.45 arc seconds; 11.3 Light-gathering power: 131x Dimensions and weight: (OD) 90 mm x (L) 860 mm; 3.3kg Viewfinder telescope: 6x24 mm Adapter and connections: 42 mm for T-thread; 31.7 mm connection Included accessories: 31.7 mm star diagonal, PL20mm & PL6.3mm eyepieces Photography: Primary focus and eyepiece projection WHAT’S INCLUDED 31.7 mm star diagonal PL20mm & PL6.3mm eyepieces Tube clamps Dovetail adapter 6x24 mm viewfinder telescope

€248.00* €309.00* (19.74% saved)
%
Vixen R130Sf Reflector Telescope - optical Tube
This lightweight 5'' Newton is the perfect entry-level telescope. Thanks to its great light collecting ability, it produces bright and sharp images and offers outstanding value for money. As well as being ideally suited for observing the moon and the planets, it can also be used to observe other objects such as star clusters, nebulae or other galaxies. The T2 thread on the focuser can be used to connect a DSLR camera in combination with an optional T2 ring. FEATURES Newton reflector telescope with 130 mm diameter Lightweight design and very portable 31.7 mm (1.25’’) connection and 42 mm T-thread Focal length: 650 mm Aperture ratio: f/5 Limiting magnitude: 12.3 Weight: 5.3 kg DELIVERY CONTENT R130Sf telescope 6x24 finder scope 2 Plössl eyepieces (20 mm and 6.3 mm) Dovetail adapter 2 tube clamps

€199.00* €299.00* (33.44% saved)
Vixen ASG-CB90 Carbon Tripod
Despite being developed for heavy mounts, the Vixen ASG CB90 carbon tripod is one of the lightest tripods on the market. The ASG CB90 tripod was originally designed for the new AXJ mount. However, it is also ideally suited to the tried-and-tested SX, HF2, AP, GPD2 and GP2 mounts. The hand nuts can be loosened to extend the tripod by one section. The legs of the ASG CB90 tripod can be secured by a reliable screw cap and are equipped with a 2.5 cm interval scale marking. FEATURES 2-section carbon tripodLightweight and portable Stable design with minimal vibrationsDimensions: 545 mm to 900 mm length Connections: 45 mm pin hole Weight: 3.4 kg WHAT’S INCLUDED Carbon tripod

€535.00*
Vixen polar meter QPL Compass for Polar Star Alignment
This accessory includes a compass with a spirit level and a height scale. The compass helps you to quickly locate the polar star when it is hidden behind trees or a mountain. The compass attaches to the accessory shoe on the Polarie Star Tracker or a device with a camera accessory shoe. FEATURES Compass Oil-filled compass Azimuth dimensions: 1° steps Height adjustment: 5° steps (max. +/- 70°) Markings: marked with luminous paint Spirit level: Built-in spirit level DELIVERY CONTENTS QPL compass

€49.00*
Vixen Wifi Adapter for EQ Mounts
The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can perform celestial navigation without any wiring. The app turns your smartphone or tablet into a controller for the equatorial mount in no time. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired ones. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are available.Convenient operation When looking through the telescope operate the mount by swiping on the app's star map. Since there are no buttons, simply slide your finger over the star chart for convenient operation of the mount. Extensive astronomical data includedThis includes data on easily observable celestial bodies such as Messier objects, NGC objects, IC objects as well as the Sun, Moon, planets, comets and dwarf planets. High-precision alignment By aligning to one or two stars, you already get a fairly accurate positioning of the mount. By aligning to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects will then be approached precisely and centrally in your telescope's field of view. The alignment information is stored and can be retained even when the telescope is switched off. By leaving the telescope in its current state without moving it after completing an observation, the next time you observe you can start the automatic setup with the same settings for the next observation. Individual setting options As with the STAR BOOK TEN controller, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the lens tube inversion (meridian flip) as desired. Even if the object moves south during tracking, you can prevent the telescope tube from inverting. Important information: Cannot be used on old SX mounts with the old blue Star Book. FEATURES Can be used on: SX2, SXD2, SXD2-PFL, SXP, SXP-PFL, SXP2, AXJ (without encoder), AXD, AX Not compatible with old SX mounts with blue Star Book CPU: 32bit CISC processor 120MH Connector: D-SUB 9-PIN socket Autoguider connector: 6-pin modular connector for SBIG Operation: Android 6, iOS 9.0 or higher Wifi standard: IEEE802.11b/g Data encryption: WPA2-APK Firmware update: via WiFi connection Operating voltage: DC12V 0,1A (max) Power supply: via mount Dimensions: 56 x 36 x 19.5 mm, weight: 60 g SCOPE OF DELIVERY Vixen Wifi adapter

€299.00*

Similar products

%
BRESSER Portable Power Station 500 Watt
Portable power storage (mobile power bank) in maxi format by BRESSER The energy you need in every situation: that's what the mobile Power Station 500 Watt by BRESSER offers you. Whether for tough outdoor use, van life, in the garden or the event of a power failure at home - with the various connection options, you can operate and charge almost all common electronic devices via the powerful and recharcheable 520Wh lithium-ion battery. Perfect for notebooks, musical instrument, etc.: The high-quality 230 volt 500 watt output with a pure sinus wave also supplies sensitive devices with power. In addition, this mobile power station is a silent and environmentally friendly alternative to power generators with combustion engines. In combination with a solar panel (available as an option), the built-in solar charge controller allows you to easily use the sunshine to directly charge your Power Station. The built-in Anderson input for direct charging via solar panel makes this particularly easy. Connection options Charge up to 4 x USB mobile devices such as smartphones, MP-3 players, mobile game paddles, cameras, drones, etc. at the same time. The device offers 1 x USB-A and 1 x USB-C fast charging output with Qualcomm Quick Charge 3.0 support. You can also power up to 5 x 12 volt devices with a total of 10 amps of current draw. Use 1 direct car cigarette lighter connector socket and 4 x DC 2.1/5.5mm connector sockets. With the 2 included adapters from 5.5/2.1mm hollow plug to cigarette lighter socket, you can connect car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. directly and in parallel. In addition, 2 sockets with 230 volts and a total of 500 watts continuous power are available on the unit. Ideal for connecting chargers for notebooks/tablets/smartphones, mobile coolers and refrigerators, musical instruments, etc. or other electrical devices in this power class. The heart of the Power Station: the built-in battery The powerful 520Wh 43Ah/12Volt (140400mA/3.7V) lithium-ion battery reliably stores your energy reserve. It is charged within 8 hours with the included 230V charger or 12V car battery charging cable. Thanks to the built-in solar charge controller, you can also charge the Power Station directly using a solar panel (available as an option). A clear display shows you all relevant information such as the battery charge status, battery charging process, USB output ON/OFF and AC/DC output ON/OFF. Possible operating time with typical applicationsHow long does the Power Station charge or operate your devices? You can easily calculate the approximate operating time yourself: runtime (approx.) = Power Station 520 watt-hour battery x 0.85 / devices input power in watts.For example a notebook with 45 Watt input power: 520 Wh x 0.85 / 45 Watt = runtime in hours; 520 x 0.85 / 45 = 10 hours runtime.LED lamp with 5 Watt: approx. 88 hoursLED lamp with 10 Watt: approx. 44 hoursCamping cooler with 30 Watt: approx. 14 hoursNotebook with 45 Watt: approx. 10 hoursTV with 60 Watt: approx. 7 hoursSmartphone: 50 x chargingTablet computer: 30 x chargingDigital camera: 50 x chargingNotebook: 5 x charging Extensive electronic protection of all current inputs and outputs: The Power Station is protected against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required. FEATURESPortable energy storage (Power Bank / Power Station)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesOperate or charge up to 11 devices at the same timePure sinus wave for both 230 volt outputsAlso suitable for sensitive devices such as notebooks or musical instrumentsMany connection options and adapters includedEnvironmentally friendly and silent alternative to power generatorsIntegrated solar charge controller for direct charging via solar panelComfortable carrying handle with non-slip rubber coatingPowerful 520Wh 43Ah/12 Volt (140400mA/3.7V) lithium ion battery3 x USB A with each 5-9 Volt 2.1 Ampere) and 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support1 x USB C with 5-12 volts 3.0 amps (for smartphones and tablets of the latest generation)4 x 12 Volt DC out 5.5/2.1mm hollow plug (max. total load 10 Amps, short time 12 A)2 x 230 Volt AC out (500 Watt continuous power, short time 1000 Watt)Indication of battery charge status and USB/DC/AC output on/off staus on displayInput charging socket: 13-22 Volt / 6 Ampere (via power supply or solar panel)Built-in Anderson input for direct charging via solar panelCharging time 0-100% approx. 8 hoursTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 Volt 6 amps230 Volt power cord for Europe (1 pc.)230 Volt power cord for UK (1 pc.)Car charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V output (2 pcs.)Instruction manual

€349.00* €549.00* (36.43% saved)
%
BRESSER Computer Cable for Remote Control of MCX Goto Telescopes and EXOS-II EQ Goto Mounts
For remote control of a BRESSER MCX 102/127 Goto Telescope or a BRESSER EXOS-II EQ Goto Mount via computer cable. Navigate your telescope comfortably with navigation software and Windows 10 computer. One click on the star map on the computer and the telescope is positioned on the desired object. NOTES(This list is exemplary and not exhaustive)To control a BRESSER MCX Goto telescope, no software update of the Computer Handbox is required. A direct use is therefore possible. To control a BRESSER EXOS-II EQ Goto mount, the Computer Handbox must be updated to software version v2.3 with the help of this computer cable set. This cable set is not suitable for the EXPLORE SCIENTIFIC EXOS-2 with PMC-Eight Goto. This set does not include navigation software and computer. DOWNLOAD NAVIGATION SOFTWARE (alternatively)Sky Map Pro Demo: https://nextcloud.bresser.de/s/PnQr9gyigxp9A6zSky Map Pro ASCOM PLUG-in: http://download.ascom-standards.org/plugins/SkyMapProPlugin.zip Carte Du Ciel: https://www.ap-i.net/skychart//en/startStellarium: https://stellarium.org/de FEATURESConnects a BRESSER MCX102/127 Goto to a PC Connects a BRESSER EXOS-II Goto to a PC Comfortable control by computer USB to serial adapter included Required firmware update for EXOS-II included Compatible with WIN 10 + 11SCOPE OF DELIVERYRS-232 computer cable USB 2.0 to RS-232 adapter + driver CD-Rom Firmware v2.3 for EXOS-II Goto Handbox Flash Utility Software for Handbox Update ASCOM driver for BRESSER MCX/EXOS-II Goto Operating instructions

€42.69* €45.00* (5.13% saved)
BRESSER Wall adapter 12V/ 2A
With this adapter, you can operate your Bresser MCX 102/127 Goto telescope, BRESSER 80/400 Goto or National Geographic 70mm/90mm Goto telescope using a 230V~ wall connector.

€49.00*
%
BRESSER Mobile Solar Charger 21 Watt with USB and DC output
Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070.Universal charger with flexible connection optionsOne USB-A connection socket is available for powering your devices. There is also an additional universal connection socket for DC bar plugs with a diameter of 5.5/2.1 mm. A universal connection cable with a 5.5/2.1mm DC bar plug on both sides and a length of 2 metres, as well as 3 plug adapters (3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 2400mA (2.4 amps). So 3000 : 2400 x 75 = 94 minutes. Dividing the result by 60 gives the charging time in hours: 1.6 hours.This means that an average smartphone can be fully charged in just about 1.6 hours with a 21-watt solar panel. Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. If you attach it to your backpack, you can even use the time during a hike for charging. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 21 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via USB A and DC hollow plug with adaptersMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 21 wattsOutput voltage at the DC socket: 18 voltsOutput current at the DC socket: max. 1.1 ampsOutput voltage at the USB A socket: 5 voltsOutput current at the USB A socket: max. 2.4 ampsCable length of the DC connection cable: 2.0 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 290 x 195 x 35 mmDimensions when unfolded: 815 x 290 x 20 mmWeight: 1,0 kgSCOPE OF DELIVERYSolar panel 21 Watt (1 piece)Carabiner hook (2 pieces)DC connection cable (1 piece)Plug adapter (3 pieces)User manual

€48.29* €59.00* (18.15% saved)
%
Vixen Porta II azimuthal mount
The Vixen Porta II is a high-quality azimuthal mount from the award-winning manufacturer Vixen. Featuring an intuitive, versatile and reliable design, the Porta II was specially developed to enable quick and precise telescopic observations along the vertical and horizontal axes without the need for a complex setup. It comes with fine adjustment wheels for fine tuning the position of the telescope to track astronomical objects. It also has a highly portable design thanks to the detachable mount head, which can be quickly detached from the tripod via an M10 screw. In addition, the dovetail mounting system (Vixen standard) ensures maximum compatibility with a wide range of telescopes. The Vixen Porta II mount in detail Easy to use The Porta II does not require a clamp, as it sports a slip clutch that allows you to adjust the mount to your desired object. It also holds its position automatically, making it very easy to use. Highly portable design The mount is easy to transport thanks to the Porta II mount head, which can be detached by removing a single screw. Easy to operateThe Porta II adjustment system allows you to track objects and make fine adjustments using the supplied shafts, which can be repositioned as necessary for optimal viewing comfort.Practical accessory storage The accessory holder features slots for your eyepieces. It can also be used to store smaller photography accessories. The holder is easy to mount via a centrally positioned screw. Built-in tool The mount comes with a tool for adjusting the friction of the slip clutch. The tool is located underneath the rubber cover for easy access. FEATURES 360° fine adjustment with worm gears2x sprockets with 120 teeth eachNo axle clamp requiredSlip clutch friction systemDovetail system (compatible with the GP and Sphinx mount) Adjusts by up to 45° Mounts tubes with an aperture of up to 155 mmPACKAGE CONTENTSVixen Porta II mountAluminium tripod2 fine adjustment wheelsMounting toolStorage shelf for accessories

€249.00* €325.00* (23.38% saved)
BRESSER Micro Motion Head MH-100 (Polar-Wedge)
Tripod head with fine adjustment for fast and precise pole height adjustment of the BRESSER StarTracker Astrophoto Mount PM-100 art. no. 4964120. The BRESSER Micro Motion Head MH-100 allows a very precise adjustment by using large dimensioned knurled screws. In order to keep the adjustment distances by using the knurled screws as small as possible, the mounting plate has a quick-release clamping device with toothing in order to be able to select a rough presetting of the pole height (latitude at the location). The Micro Motion Head MH-100 can be mounted on any photo tripod with 1/4 inch photo thread closure. The BRESSER StarTracker astrophoto mount can then be mounted on the MH-100 tripod head without the use of tools using a 1/4" photo thread screw. The complete  motion head is made of black anodized aluminum and guarantees highest stability by the use of solid material. The knurled screws with fine pitch thread are even made of stainless steel and guarantee a long durability and corrosion resistance. Ideal for optimizing tracking accuracy in astrophotography. IMPORTANT NOTE: Can also be used as a stable adjustment element of a telescopic sight in astrophotography. Parallel alignment of the main telescope and the guide telescope is thus also possible quickly and precisely. Base plate connection: 3 x 1/4 inch photo thread with 35.0 mm hole spacing. Mounting plate connection: 2 x M8x1.25 thread with 35.0mm hole spacing. FEATURES Compact micro motion head with fine adjustment Functions as a so-called polar-wedge For precise adjustment of polar alignment (EQ mode)Mounting plate with quick-release clamping device and toothingCan be used with any photo tripod and 1/4inch thread adapterMade of black anodised aluminium and stainless steel Quick and easy to use deviceSuitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX  Also ideal as an adjustment element of an auto-guiding scopeFor parallel alignment of main telescope and guiding telescope Base plate connection: 3 x 1/4 inch photo thread; hole spacing 35.0mm Connection mounting plate: 2 x M8x1.25mm thread; drilling distance 35,0mm SCOPE OF DELIVERY Micro Motion Head MH-100 Instruction manual

€85.00*
BRESSER BR-BHS Ball Head for Lightstand
This is a universal ball head that can be mounted on a spigot connector of a lamp stand. The lamps or the accessories can be aligned in any position. A 1/4 thread is attached to the top of the adapter to provide additional accessories. FEATURESHeight: 9 cmUniversal ball headSCOPE OF DELIVERYball head

€16.85*
Vixen rigid Accessory Tray for HAL130 and Porta II Tripods
The Vixen rigid Accessory Tray for HAL130 and Porta II Tripods offers practical storage space for eyepieces and various accessories.It also improves the overall stability of the tripod.The tray can be used on the HAL130 and SXG HAL 130 for GP and SX, as well as on the Porta II tripod.PROPERTIESFor eyepieces and various accessoriesIncreases the stability of the tripodsCan be used on HAL130, SXG HAL 130 and Porta tripodsWHAT'S INCLUDEDTray for tripodsScrew set 

€29.00*
BRESSER Portable Power Supply 100 Watt
Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with a solar panel (available as an option). Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.FEATURESPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputInstruction manual

€169.09*
BRESSER Photo mount with field tripod and wedge
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER photo mount is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain punctiform even with long exposures. Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER photo mount is designed for a camera with lens of max. 2.5 kg total weight to carry and track. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the optical pole finder, this is done quickly.  After setting up the light and compact photo mount, simply set the approximate latitude (pole height) to the scale and aim Polaris through the illuminated pole finder scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ...  The tracking is carried out by a precise stepper motor, which can also be moved via the hand box with 2- or 32-fold speed in forward and reverse. Thus, the sky section can be adjusted even more precisely. Low power consumption allows up to 50 hours of operation with just one battery charge.  The height-adjustable stainless steel tripod with polar wedge is an extremely stable base for the BRESSER photo mount. Thanks to the integrated circular level in the tripod head even the leveling of the photo mount is child's play. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount and the tripod with polar wedge are also available separately - Product No.: 4964111 and 4964112   FEATURESEquatorial Photo-MountAdjustable stainless steel field tripod with polar wedge and bubble levelAutomatic siderial tracking against the Earth rotation Handbox to control the tracking motors (2x/32x)Suitable for northern and southern henisphereOptical pole finder scope with illumination unit includedBallhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 3/8" threaded bolt for ballhead mountingPhoto-Mount with 1/4" und 3/8" inner threads for tripod mountingHigh precision stepper motor with helical gear for accurate tracking Large screws and handles for easy usage at night  Battery operation or stabilized power adapter (optional acc.) Battery life: up to 50 hoursPower connector at handbox: 6 volts DC jack 5.5/2.5mm (positive pole at center pin)Weight Photo-Mont with ballhead: 1.4 kg Weight tripod with polar wedge: 3.5 kgLoad capacity of Photo-Mount: up to 2.5 kg Height of camera sattle plate max. 140 cmSCOPE OF DELIVERYFoto-Mount headTracking motor with HandboxUltra-stable stainless steel field tripod with bubble levelBallhead with quick release saddle plate Pole finder scope with illumination unitBattery compartment 6 volts with case (no D-batteries included)Manual   

€409.00*
%
BRESSER Field Tripod ST-3 stainless steel
The BRESSER Field Tripod ST-3 is a solid and height-adjustable tripod with double tripod leg clamp and made of corrosion-resistant stainless steel. It is suitable for direct usage with the BRESSER Slider Binocular Mount. Adjust the extendable stainless steel tripod to the desired base height and thereby pre-select your favourite observation position. For example, for landscape observation while standing or sitting, the full tripod height should be used. For night sky observation, a lower setting is recommended to ensure a comfortable viewing position while sitting or lying down. The tripod is equipped with a standard GP mounting head and a central screw with metric M10 threaded shaft. It is also suitable for EXOS-1 and EXOS-2 EQ mounts. The upper tripod leg tubes have a diameter of 50.8 mm (2 inches).FEATURESFor usage with BRESSER Slider Binocular Mount Standard GP mount head Also suitable for EXOS-1 and EXOS-2 EQ mounts Solid stainless steel and aluminium structure Double tripod leg clamp Height adjustable approximately from 68 to 110 cm Tripod weight: 5.5 kg Transport length approximately 87 cmUpper tripod leg tubes have a diameter of 50.8 mm (2 inches)SCOPE OF DELIVERYTripod Accessory tray Central spindle

€122.00* €199.00* (38.69% saved)
BRESSER Counterbalance 4,5kg for EXOS-2/EQ5
Additional counterweight to balance heavy accessories etc.

€39.90*

Customers also bought

Carry bag for AP mounts
Sturdy case for AP, AP-SM and APZ mounts and individual accessory modules.The outer side is equipped with a reflector strip to improve visibility in the dark.The inside of the case features elastic straps for securing accessories.FEATURES Tailor-made case for AP mountsElastic straps inside case for securing accessoriesSeparate compartments keep the mount separate from the accessoriesThe outer side is equipped with a reflector strip to improve visibility in the darkDELIVERY CONTENTAP carry case

€105.00*
Vixen Polarscope PF-L II for AP & SX Mounts
Vixen’s latest design of polar finder, allows a simple, hassle-free method of polar alignment. The Vixen Polarscope PF-L II for AP & SX mounts has a reticule showing the Pole star (Polaris) and two other stars (Delta UMi and 51 Cep) in their precise positions. By turning the Polarscope you can easily match the reticle with the asterism of these stars in the sky and mechanically adjust your mount’s azimuth and altitude axes to align to the true North Pole. You can then adjust the Polar star to a more precise alignment using the reticule’s year marking (which runs from 2015 to 2040, but in practise can be used much longer after this) . Using this alignment process, with visual reference to the actual stars in the sky, a complicated alignment, using date and time to calculate Polaris offset from the pole is unnecessary. For alignment in the Southern Hemisphere you simply use the Trapezium asterism (Sigma, Chi, Tau and Upsilon Octantis) of the constellation Octans and position the reticule with the trapezium stars aligned to their marked positions. The Polarscope has built-in LED illumination, which is dimmable in many stages, and ensures an automatic shut-off after 2 minutes, saving your battery life. The PFL-II also has an improved edge sharpness, when compared with its predecessor. FEATURES Lighting: LED illumination, with automatic shut-off Power supply: 3v button cell Accuracy: ≤ 3 arc minutes Dimensions: 47 x 55 x 127 mm Weight: 155g Compatibility: Vixen AP, SX, AXJ, AXD Mounts SCOPE OF DELIVERY PF-L II Allen key Battery CR2032 3v

€275.00*

Customers also viewed

Vixen SX2WL Equatorial GoTo Mount with Wifi Module
Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SX2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins.An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 12 kg, the axis cross of the mount weighs just 7.0 kg (15.4 lbs) making it ideal for mobile observations.In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SX2 mount in detail Precision stepper motors and micro-step motion control systemAt the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweightThe solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained. Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness  Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 12 kg, photographic, without counterweight Counterweight: 1x 1.9 kg  Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L), weight: 7.0 kg (15.4 lbs), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input: ST4 Power consumption SX2WL+Wireless unit: DC12V / 0.3-2.0 A (load 8 kg), 0.4-2.2 A (load 12 kg) SCOPE OF DELIVERYSX2WL EQ mount Wireless unit Counterweight: 1.9 kg (1pc) Mounting tools Cigarette lighter cable

€1,799.00*
BRESSER Nebula Goto Kit EXOS-2
Do it like the pros... You already own a BRESSER EXOS-2 mount and want to take a big step forward? Then set off for new astronomical shores with the new Nebula Goto Kit. This modern system offers you several options for control. You can operate the mount directly via its own Nebula control interface using your smartphone or tablet (iOS and Android supported). Alternatively, you can also use a planetarium software like SkySafari. Of course, manual control remains an option. For this, a handbox for minor corrections or simple control commands is included in the delivery.Moreover, with the BRESSER Nebula Goto Kit, you can connect your laptop or PC directly via WLAN or LAN cable (recommended for faster data transmission) to the Nebula control unit. This not only gives you full control over the mount, but also allows you to connect several devices such as cameras, motor focus, filter wheel, etc., directly to the control unit via various USB ports. This eliminates the need to connect each device to your computer via cables. The pre-installed program KStars / EKOS lets you comfortably control all devices from your PC or laptop. Electronic polar alignment or guiding can also be easily implemented with the Goto Kit, provided you have a camera connected. Additionally, you are not limited to the software of the Nebula control unit. Thanks to the installed ASCOM Alpaca driver, you can use your own programs on your computer to control the mount - be it Stellarium or N.I.N.A. The two stepper motors with a belt drive ensure a smooth, direct drive of the two axes. It is only important to have a good balance. FEATURES Belt drive for more precise, quieter tracking Stepper motors with high resolution (0.36´/microstep) Hand control box for direct control of the mount Virtual hand control box for smartphones and tablets PC control – ASCOM compatible USB ports for cameras, motors, filter wheels, etc. SCOPE OF DELIVERY 2 stepper motors for both axes (RA and DEC)Raspberry Pi control unitBasic handbox230V / 12V / 3 A power supplyConnection cableManual for download

€895.00*
%
Vixen AP Mount with manual fine Adjustment
The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be adjusted quickly to the target object. There is a wide range of optional accessories. The ADVANCED POLARIS mount is perfect for both beginners and advanced observers who require a lightweight travel mount. STYLISH DESIGN The AP mount features an ultra-smooth finish without any projecting parts. Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps! QUICK POLAR ALIGNMENT The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings. OPTIONAL POLAR FINDER SCOPE The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power. OPTIONAL POWER SUPPLY The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions. OPTIONAL STAR BOOK ONE CONTROLLER The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. The STAR BOOK ONE controller is designed for the AP-SM mount and is an integral part of the RA motor module. NOTE The STAR BOOK ONE controller is not sold separately but is only available with the Motor Module Set! FEATURES R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth Azimuthal adjustment: Twin adjusting screws Altitude adjustment: Twin adjusting screws Number of ball bearings: 7 Polar finder: Optional Motors: Optional Tracking: Manual fine adjustment Counterweight bar: 20 mm WHAT’S INCLUDED AP mount 1.0 kg counterweight

€699.00* €829.00* (15.68% saved)