Vixen AP Photo Guider Shaft

For balancing the Polarie Star Tracker in connection with the counterweight bar. The counterweight of 1.0 kg is also compatible with GP, SX mounts and mounts with 20 mm counterweight bar PROPERTIES Suitable for Polarie Star Tracker, GP, SX and AP mount For counterweight rods with a diameter of 20 mm Weight: 1.0 kg WHAT'S INCLUDED Weight: 1.0 kg Locking Bolt

The DD dovetail mount was developed for the POLARIE multi-mounting block to attach camera equipment - from DSLR cameras, to telephoto lenses or even compact telescopes. Using this accessory, the load capacity of the POLARIE Star Tracker is increased to up to 6 kg. To make it easier to find the Pole Star, there is a wide slot in the dovetail for the polar finder. In addition to the regular accessories, two cameras can also be balanced on both sides of the existing photo thread (1/4 inch) with optional ball heads. PROPERTIES Accessories for the POLARIE multi-mounting block Allows you to balance the camera Increases the load capacity of the POLARIE Star Tracker to 6 kg Allows a counterweight to be attached Hole bores 1x 1/4 inch, 1x 1/4 inch external thread, 2xM6 internal thread on the plate WHAT'S INCLUDED Dovetail rail DD

The Vixen POLARIE Multi Mounting Block was developed to fit Vixen profile dovetail rails, such as the Vixen Dovetail Slide Bar DD, to the Polarie Star Tracker. In this way you can increase the load capacity of the tracker up to 6.5 kg! By releasing the clamping lever on the multiple assembly block, you can move the dovetail freely and clamp it again, making balancing of your camera or telescope rig an easy task. The hole in the middle of the multiple mounting block enables the photographer to carry out the polar alignment without removing the POLARIE polar finder PFL with the dovetail rail DD or the dovetail rail PG. Using one of these combinations, you can easily put deep sky photography into practice with a telephoto lens, or compact telescope. PROPERTIES Allows the inclusion of dovetail rails The Star Tracker can hold up to 6.5 kg in weight Allows the use of telephoto lenses Polar alignment possible without removing the polar finder Weight: 440g WHAT'S INCLUDED POLARIE multiple assembly block Assembly tool

The POLARIE U is an ultra-compact automatic star tracking device that can be easily transported.In addition to the functions of conventional star trackers, which track a camera for a long exposures, accurately tracking the regular movement of celestial objects, the POLARIE U has a speed adjustment function, which allows it to be used as a panning mount too for time lapse photography.Using a smartphone, you can control the shutter release intervals of the images. Through the communication between the smartphone and the POLARIE U Star Tracker, you can control the exposures and take beautiful, sharp pictures of the stars and the Milky Way without getting any star trailing.The Star Tracker is very small and light weight, making it ideal for mobile use or air travel.The Vixen POLARIE U Star Tracker in detail:Star-scape photography (stars and landscape).A silhouetted landscape on earth is photographed together with the starry sky. The beauty of a landscape and the starry sky can be shown together on one photo. POLARIE U opens up a wonderful foreign world of star-scape photography and makes this possible for both beginners and advanced photographers.Conventional telescopic astrophotography photographs a relatively narrow area of the sky. Star-scape photography mainly uses a wide-angle lens and takes impressive photos in which stars, and other celestial targets such as the majestic Milky Way and landscapes are combined. The possibilities of the compositions are endless and a completely new kind of landscape photography opens up.Weight reduction of more than 20% and improved load capacity.The structure of the original POLARIE has been completely changed. The distance between the two bearings that support the rotating shaft is about four times the distance of the previous model. This leads to a higher load capacity despite the weight reduction of 20%. The maximum load capacity is 2.5 kg (approx. 2.5 kg at 10 cm from the centre of rotation) when used for wide-field astrophotography. The maximum load capacity is increased to 6.5 kg (approx. 6.5 kg at 10 cm from the centre of rotation) when a POLARIE Multi mounting block (optional) and a dovetail slide rail DD (optional) are combined. In addition, used in vertical configuration, the POLARIE U can reach a load capacity of 10 kg (approx. 10 kg 10 cm from the centre of rotation) for time-lapse photography and is therefore suitable for heavy camera equipment.Settings via SmartphoneCommunication between tracker and smartphone via the Vixen Polarie U App enables various settings via smartphones or tablet. For star/landscape photography, the speed is selected in user-defined mode, and for time-lapse photography, settings for interval time, exposure, and rotation speed can also be easily programmed.Five different speeds:Star-scape photography (half star speed). This setting is intended for displaying a landscape together with the starry sky. The stars are not tracked exactly, but slower in order not to blur the landscape in the foreground. This way you get beautiful images of the landscape and the starry sky.Wide Field Astrophotography (Star Speed)When this mode is selected, the POLARIE U follows the stars at the same speed as the daily movement of the stars. In this mode, widefield long time exposures of comets, nebulae, star clusters and the Milky Way are made and tracked precisely.Solar Tracking (solar speed)For recording solar eclipses over a long period of time.Moon Tracking (moon speed)For recording lunar eclipses over a long period of time.Custom ModeThis allows you to set the POLARIE U to the desired tracking speed. The initial setting is four times the star speed. If you want to change the setting for a different speed, a smartphone or other wifi device and application software are required.Shoot-Move-Shoot ModeIt is possible to stop the movement of the camera during the exposure and restart it after the end of the exposure. It is also equipped with a camera connector (shutter release) that controls the camera shutter during shooting with SMS or interval shooting. If the camera in use is connected with the cable release, the settings can be easily adjusted using a smartphone. A Wi-Fi connection is required when using this feature. An additional cable is required to connect the camera and POLARIE U together.Autoguider portCommercially available autoguiders can be used with the POLARIE U (Usable only in R.A.).  An important new feature over the original Polarie - attach a small Guidescope, or Off Axis Guider and autoguiding camera to your main camera and use the standard ST-4 protocol port to guide the Polarie U in Right Ascension, ensuring absolute accuracy of tracking (requires additional separate computer, or standalone guider). FEATURES    Speeds: Sidereal rate, 0.5X star speed, sun, moon. North / South hemisphere compatible    Operating System: Android 4.4 and over or iOS 9.9 and over Wi-Fi: IEEE 802.11b/g    Worm gear: RA gear rim with 144 teeth (58.4 mm Al alloy)    Screw: 9.8 mm brass    RA and DC axis: 40mm, aluminium alloy    Motor drive: electric motor drive with impulse motor (stepper motor)    Load capacity: 2.5 kg standard, 6.5 kg with special accessories, 10 kg with fast motion    Wi-Fi function for Smartphone    Direction finder tube: 8.9 degree field of view without magnification.    Power supply: USB Type-C or 4x AA batteries    Dimensions: 88.5mm x 72mm x 110.5mm    Weight: 575gSCOPE OF DELIVERY    POLARIE U Star Tracker    Attachable direction finder

​With this pole finder mount you can connect existing polar finders from your AP or SX mount to your Polarie U Star tracker.The polar finder is simply screwed into the thread of the mount and the screw of the mount is fixed to the Polarie U Star tracker. This is a cost-effective solution to attach existing polar finders to the Polarie U Star Tracker. Usable polar finders are those of the SX, SXD, SX2, SXD2, AP, SXP, SXP2, AXJ, AXD and AXD2. Note: It is also possible to use it with a Polarie pole finder if the chrome-plated part, which is inserted into the hole of the Polarie Star Tracker, is unscrewed. FEATURESPolar finder mount for Polarie U Star TrackerCan be used with: SX, SXD, SX2, SXD2, AP, SXP, SXP2, AXJ, AXD and AXD2 pole findersLimited use with: Polarie pole finder (small modification required)Allows exact pole alignmentSCOPE OF DELIVERYBracket for polar viewfinderMounting screw

Universal dovetail clamp suitable for all optical tubes which are equipped with a standard 44mm dovetail rail (Messier/ES/GP/Vixen).  Also a screw kit is included for mounting the dovetail clamp direct on the top of the handle of all BRESSER Messier und EXPLORE-SCIENTIFIC telescopes. Thus a parallel mounted guiding telescope can be set up very easy and enables long exposure astrophotagraphy with autoguiding.  The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 additional 1/4" photo tapped holes at 120 degrees angular distance on a pitch circle diameter of 55 mm to allow a versatile adaptation to a variety of other telescopes and adapter plates.FEATURESUniversal dovetail clamp  Suitable for 44mm dovetail rail of Messier/ES/GP/Vixen  Screw set for Messier/ES handle included For piggy-back mounting of a guiding telescope Enables astrophotography with autoguiding CNC machined Aluminum Additional 1/4" photo thread holes available SCOPE OF DELIVERY Dovetail clamp Screw set (2pcs M6x25mm)