Vixen AP Conterweight Bar

  • Diameter of bar: Diameter: Dia. 20 mm
  • Effective bar length: 269 mm
  • Compatible counterweights: 1 kg, 1.9 kg, 2.8 kg, 3.7 kg
  • Weight: 820 g
  • Dimensions: 78×328 mm

€44.00*

% €55.00* (20% saved)

Available, delivery time: 2-4 days

Product number: X000045
GTIN/EAN: 4955295258178
WEEE-Reg.-Nr.: DE 34716369

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "Vixen AP Conterweight Bar"
Counterweight bar, which is delivered with the AP-mount and AP-SM mount. It is designed for balancing an optical tube after being secured with a counterweight and installed on the declination body. It can used with the APZ Alt-Az mount.

FEATURES
  • Diameter of bar: Diameter: Dia. 20 mm
  • Dimensions: 78×328 mm
  • Effective bar length: 269 mm
  • Weight: 820 g
  • Compatible counterweights: 1 kg, 1.9 kg, 2.8 kg, 3.7 kg
Batteries required: false
Colour: silver
Material: Aluminium, Stainless steel

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.

Accessories

%
Vixen AP-Z azimuthal Mount with Slip Clutch
Simple force of friction keeps the telescope in place. Easily direct the telescope to your desired celestial object without loosening a screw. The friction automatically holds the telescope in position. The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be quickly adjusted to the target object. There is a wide range of optional accessories. FEATURES Azimuthal telescope mount with manual fine adjustment Easy to use and quick to install Designed for telescopes up to 8 kg WHAT'S INCLUDED Mount Wheel for fine adjustment

€498.00* €679.00* (26.66% saved)
Vixen Counterweight 1.9kg
With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

€52.00*
Vixen counterweight 2.8 kg
2.8-kg counterweight for mount counterweight barsUse counterweights to balance your mount. Multiple counterweights may be required depending on the telescope.FEATURESSuitable for SX, SXD, GP2 and GPD2 mountsWeight: 2,800 gPACKAGE CONTENTS2.8-kg counterweight

€62.00*
%
Vixen counterweight 3.7 kg
The 3.7-kg counterweight can be attached to the counterweight bar to balance your mount. Depending on the telescope, multiple weights may be required. The counterweight is suitable for Vixen SX, SXD, SXP2, GP2, GPD2 and AP mounts.FEATURESSuitable for SX, SXD, SXP2, GP2, GPD2 and AP mountsWeight: 3,700 gPACKAGE CONTENTS3.7-kg counterweight

€49.00* €73.00* (32.88% saved)

Similar products

BRESSER Counterbalance 4,5kg for EXOS-2/EQ5
Additional counterweight to balance heavy accessories etc.

€39.90*
BRESSER Counterbalance 2.0 kg for EXOS-1 + 2
Additional counterweight to balance heavy accessories etc.FEATUREScolor matched with the Bresser EXOS-1/2 seriessuitable for counterbalance bar with 20mm diameterSCOPE OF DELIVERY1x counterbalance 2.0kg

€29.90*
EXPLORE SCIENTIFIC Counter Weight 1.0 kg for iEXOS-100 Mount
Additional Counter Weight 1.0 kg for EXPLORE SCIENTIFIC iEXOS-100 PMC-Eight Wifi Goto Mount to balance also larger telescope tubes.FEATURESAdditional counter weightBalance also larger telescope tubesFits to iEXOS-100 MountTotal weight: 1.0kgDiameter: 80mm; height: 30mmBore diameter: 14.7mmSCOPE OF DELIVERYCounter weight 1.0kg (1 pc)

€31.00*
EXPLORE SCIENTIFIC Truss Dob Counter Weight Set
Counter Weight Set to retrofit all Explore Scientific Dobson Telescopes. Get your telescope perfectly balanced even you are using heavy eyepiece with coma corrector, a binoviewer or big finder scopes. The counter-weight rod has 14,0 mm in diameter. The fixing thread is a metric M10 with hex nut. Delievery content:2 x Counter weight each 1.0kg1 x Counter weight rod 1 x Mounting material

€34.00*
Vixen AP Photo Guider Shaft
The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw

€52.00*
Vixen counterweight 2.8 kg
2.8-kg counterweight for mount counterweight barsUse counterweights to balance your mount. Multiple counterweights may be required depending on the telescope.FEATURESSuitable for SX, SXD, GP2 and GPD2 mountsWeight: 2,800 gPACKAGE CONTENTS2.8-kg counterweight

€62.00*
%
Vixen Counterweight 1.0kg
For balancing the Polarie Star Tracker in connection with the counterweight bar. The counterweight of 1.0 kg is also compatible with GP, SX mounts and mounts with 20 mm counterweight bar PROPERTIES Suitable for Polarie Star Tracker, GP, SX and AP mount For counterweight rods with a diameter of 20 mm Weight: 1.0 kg WHAT'S INCLUDED Weight: 1.0 kg Locking Bolt

€29.00* €46.00* (36.96% saved)
Vixen Counterweight 1.9kg
With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

€52.00*
%
Vixen counterweight 3.7 kg
The 3.7-kg counterweight can be attached to the counterweight bar to balance your mount. Depending on the telescope, multiple weights may be required. The counterweight is suitable for Vixen SX, SXD, SXP2, GP2, GPD2 and AP mounts.FEATURESSuitable for SX, SXD, SXP2, GP2, GPD2 and AP mountsWeight: 3,700 gPACKAGE CONTENTS3.7-kg counterweight

€49.00* €73.00* (32.88% saved)
Vixen counterweight, 7 kg, for AXD and AXJ mounts
7 kg counterweight for balancing the mount with heavy telescopesSuitable for AXD, AXD2 and AXJ mountsFEATURES Counterweight for AXD/AXJ mounts Weight: 7 kgDELIVERY CONTENT7 kg counterweightClamp screw

€155.00*
%
Vixen 3.5 kg Counterweight for AXD Equatorial Mount
Vixen 3.5 kg counterweight for AXD, AXD2 and AXJ mountsBalances the mount on heavy telescopes FEATURESCounterweight for AXD mountsWeight: 3.5 kgDELIVERY CONTENT3.5 kg counterweightClamp screw

€89.00* €129.00* (31.01% saved)
%
AXD counterweight, 1.5 kg
AXD counterweight, 1.5 kg, for AXD mountsFEATURESAXD counterweight, 1.5 kg, for AXD and AXJ mountsFor balancing the mountWeight: 1.5 kgDELIVERY CONTENT1.5 kg counterweightClamp screw

€54.00* €68.00* (20.59% saved)

Customers also bought

%
Vixen Dew Cap Heating
The Vixen dew cap heater prevents your optics from fogging up due to dew.A must-have accessory for cold and damp nights.FEATURES Consumption: 16.2 Ohm (12 V, 8.9 W) Dimensions: 655 mm long heater with 2.2 m cable Connection: 2.1 socket with medium-negative polarity Weight: 120 g DELIVERY CONTENT Battery box Vixen dew cap heater

€92.00* €115.00* (20% saved)
Vixen DEC Motor Module
The DEC motor module from Vixen allows the declination axis to be controlled by a motor in conjunction with the RA motor module #25804. This makes it possible to make fine adjustments without touching the mount. This is essential for astrophotography with longer exposure times and focal lengths.FEATURESMotorised fine adjustments of the DC axis Ideal for astrophotography For retrofitting an AP mountDELIVERY CONTENTMotor moduleHex keyScrews

€319.00*
Vixen Counterweight 1.9kg
With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

€52.00*
Vixen Dew Cap for 200mm Aperture Telescopes
The Vixen dew cap is designed specifically for Vixen's 200 mm aperture optics. It fits the R200ss, VC200L, VMC200L and many other telescopes with a similar diameter. The dew cap prevents fogging of your optics due to humidity and additionally protects the telescope from stray light. The 1 mm thick polyethylene material is very flexible, light and adaptable.FEATURES Protects against dew Protects against stray light Made of flexible polyethylene material Dimensions: 22x77cm Material thickness: 1 mm Weight: 104 g SCOPE OF DELIEVERYDew Cap for 200mm Aperture Telescopes

€59.00*
%
Vixen AP Declination Body Unit
The declination body unit allows you to expand the AP Photoguider to a complete equatorial AP mount with mototized RA and DC axes. You can move and track the mount in both axes. In addition, you will need the Manual Fine Adjustment Module, or the DEC motor module, as well as the AP counterweight rod and a counterweight. The counter weights of the SX mount series can all be used on the counter weight rod. The APZ counter weight can also be attached to this unit. The built-in battery compartment serves as an additional power supply and is powered by 4 AA batteries.  FEATURESExtends the AP Photoguider to an EQ mount Allows the DC motor module to be attached Built-in power compartment for 4x AA batteries Makes guiding in RA and DC possible SCOPE OF DELIVERYAP declination body Mounting screws Mounting tool

€100.00* €125.00* (20% saved)
%
Dovetail adapter AP Clamp Mount Head Unit
This is a unit for securing the 44 mm wide Vixen dovetail slide barand other Vixen dovetail bars.It is a replacement part for AP mounts and is attached to the DC module with two screws.FEATURES Dimensions: Diameter: 78 x 56 mm without extrusion parts Weight: 340 gDELIVERY CONTENTDovetail adapter AP Clamp Mount Head UnitScrews and tool

€75.00* €94.00* (20.21% saved)