Trigger cable CN3 for Canon

The Vixen POLARIE Multi Mounting Block was developed to fit Vixen profile dovetail rails, such as the Vixen Dovetail Slide Bar DD, to the Polarie Star Tracker. In this way you can increase the load capacity of the tracker up to 6.5 kg! By releasing the clamping lever on the multiple assembly block, you can move the dovetail freely and clamp it again, making balancing of your camera or telescope rig an easy task. The hole in the middle of the multiple mounting block enables the photographer to carry out the polar alignment without removing the POLARIE polar finder PFL with the dovetail rail DD or the dovetail rail PG. Using one of these combinations, you can easily put deep sky photography into practice with a telephoto lens, or compact telescope. PROPERTIES Allows the inclusion of dovetail rails The Star Tracker can hold up to 6.5 kg in weight Allows the use of telephoto lenses Polar alignment possible without removing the polar finder Weight: 440g WHAT'S INCLUDED POLARIE multiple assembly block Assembly tool

This release cable was developed for taking time-lapse recordings with the POLARIE U Star Tracker and a DSLR camera. In combination with an app specially developed for the POLARIE U, you can simply set up an exposure control via WIFI, controlling your exposures very easily using your smartphone.REQUIREMENTPOLARIE U Star Tracker, smartphone with the POLARIE U Control app and release cable for your cameraPROPERTIESLocking cable for Canon, Fujifilm, Olympus, Pentax, SamsungConnection to the POLARIE U: 2.5 mm stereo mini plugConnection to the camera: 2.5 mm stereo mini plugCoiled cable length: 20 cm to 50 cmWeight: 26 gWHAT'S INCLUDED:Release cable

Attachment plates, such as the ARCA SWISS are compatible with this quick-release panorama plate. (Note: angle plate is not included in # 35527). The base of the Vixen Quick Release Panorama Clamp can be rotated 360 degrees so that the position of the mounted camera system can be adjusted simply by loosening the clamping lever. In addition to the recommended Vixen dovetail bar DD and top plate, the camera mount is also compatible with other devices with 1/4 ", 3/8" inch screws. The recommended accessory is the X000096 Angle L Bracket for portrait and landscape photography. PROPERTIES Can be rotated 360 degrees ARCA SWISS compatible Weight: 320g WHAT'S INCLUDED Quick-release panorama plate Screws and tools

The BRESSER UV + IR Cut Filter makes lunar and planetary images even sharper.Digital astro cameras have a wide sensitivity range that significantly exceeds the spectrum of visible light. Thus, the wavelengths of invisible light in the ultraviolet and infrared are also captured. This leads inevitably to a small additional and of course unwanted blur. The solution is this UV + IR Cut Filter, which allows only light in the visible range 400 nm to 680 nm to pass through and blocks all other wavelengths of light. As soon as these disturbing light waves are cut off, the sharpness of the image and the contrast are increased. Suddenly, details on the surface of Jupiter, for example, can be seen that were previously only barely visible. A clear plus, which can be achieved by this filter.Suitable for BRESSER CMOS cameras and other manufacturers with female camera thread M30 x 0.75 mmAfter removing the original screw adapter with sensor protection glass, the BRESSER UV + IR Cut filter is mounted to the camera instead. This filter has a fine M30 x 0.75 mm external thread for mounting on the camera. The exchange is therefore quick and easy. On the opposite side, i.e. on the telescope side, there is a standard C-mount female thread for mounting other accessories. Note: This filter does not have a standard 1.25 inch (31.7 mm) filter thread. FEATURESBRESSER UV + IR Cut Filter for photographyWavelengths of invisible light in ultraviolet and infrared are blockedPasses only visible light in the range 400nm to 680nmLunar and planetary images become even sharperSuitable for BRESSER CMOS cameras an othersMale fine thread M30 x 0.75mm for mounting on the camera housingC-Mount internal thread for mounting further accessories Quick and easy mounting of the filterGlass filter made of fine optical glassPlane-parallel polished and multiple layer coatedFilter housing made of matt black anodized aluminumHousing outer diameter 31.7mm (1.25 inch)Diameter of free light transmission 17.0mm (1.25 inch) SCOPE OF DELIVERYUV + IR Cut Filter (1 pc)

Universal dovetail bar for Vixen and ARCA-SWISS standard clampsThe Vixen Dual Slide Dovetail Bar can be attached to mounts with the Vixen dovetail standard as well as to narrow profiles such as the popular ARCA-SWISS standard. This rail is therefore not only suitable for mounts but can also be used on many items from the photo accessories range. With the optional quick-release fastener (item No.: X035438 - Vixen Dovetail adapter with quick-release fastener) the rail can also be attached to a camera tripod. With the optional quick-release panorama clamp (item No.: X000096 - Vixen Quick Release Panorama Plate) and an additional counterweight rod, you can, for example, attach a telephoto lens to the POLARIE U. A spotting scope can also be attached quickly and securely to an astronomical mount.FEATURES    Screw connection holes: 1/4 inch thread 3x, 3/8 inch thread 1x, M6 thread 4x lateral    Compatibility: Vixen and ARCA-SWISS standard    Material: Aluminum    Dimensions: 182 x 42 x 15 mm    Weight: 178 gSCOPE OF DELIVERY    Vixen Dual Slide Dovetail Bar

​For precise polar alignment of the POLARIE U Star Tracker.With this fine adjustment unit DX you can make sensitive movements in all directions in order to achieve an exact polar alignment.There is a quick-release fastener at the head of the fine-adjustment, which is compatible with the Vixen quick-change angle plate, or the Arca Swisssystem. You can attach or remove your Star Tracker quickly. An optional dovetail plate mounting block is available for versatile use.Thanks to the two M8 threaded holes at a distance of 35 mm on the head, the quick release can be exchanged for the separately available dovetail mounting block.This enables the straightforward mounting of telescopes or heavy telephoto lenses, like the Vixen FL55SS telescope.The fine adjustment DX is equipped with a 1/4 "or 3/8" thread and can therefore be used on all common photo tripods.This tripod adapter can be exchanged for a Vixen tripod adapter in order to be able to connect the fine adjustment unit to the heavier duty Vixen telescopic tripods too.The fine adjustment DX enables a large adjustment range from -30 degrees to 90 degrees and 360 degrees in azimuth.The mounted camera can be tilted freely from 0 degrees (horizontal) to 90 degrees (vertical) by loosening the clamping lever. The fine adjustments can be adjusted in a range of +/- 7.5 degrees.PROPERTIES1/4 "or 3/8" thread for photo tripods-30 degrees to 90 degrees and 360 degrees adjustable in azimuthFine adjustments in the range of +/- 7.5 degrees adjustable2 degrees adjustment per turn of the screwArca Swiss System compatibleAdaptable to Vixen telescopic tripodsAssembly of telescopes or heavy telephoto lensesOver 8 kg payload possibleWHAT'S INCLUDEDPole fine adjustment unit DXQuick release clampAngle plate L adapter for Vixen telescopic tripods with 45mm connectionTechnical specifications