OPTUS MyTime MC LCD Wall /Table Clock silver 225x150mm

This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 9080800 FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

The ideal room climate not only has positive effects on our well-being, it is also good for our health. The two critical values which determine the room climate are temperature and relative humidity.If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens. On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator. With the practical 3 piece ClimaTemp Thermo Hygrometer Indicator you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom and children's room). Next to the exact measured values for the room temperature (C°) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action. FEATURESTemperature display in °CAir humiditySymbolic room climate indicatorEarly prevention of mouldMounting type: stand, wall mount and magnetSCOPE OF DELIVERY3x Thermo / Hygro Station3x CR2032 batteriesmanual

With the BRESSER Radio-Controlled Colour Weather Station with Frameless Display, you’ll always be on the sunny side of weather technology. The chic colour screen presents all important information at a glance: temperature, humidity, and a reliable weather forecast. The modern, frameless design integrates stylishly into your home, office, and more. Your reliable planning assistant – the weather station with forecast The graphical weather forecast of the radio-controlled weather station reliably informs you about upcoming weather changes. A practical addition: the current air pressure is also displayed, allowing you to keep track of weather developments through regular checks. Perfect for planning your activities better and always being prepared. Room climate in perfect condition – with the radio-controlled weather station The weather station with outdoor sensor measures not only temperature and humidity outside your door but also provides accurate values for the indoor area. Additionally, the room climate comfort indicator shows the condition of the indoor air. This way, you can ensure a pleasant atmosphere in your home or other indoor spaces. Powerful outdoor sensor for precise data The outdoor sensor of this weather station impresses with user-friendliness and robust design. With a range of up to 80 m, the ideal location is quickly found. You can also read the values directly on-site on the integrated display. Additionally, the casing is water-resistant (IP44), so the temperature and humidity meter can withstand wind and weather. Appealing weather station with useful features for everyday life The radio-controlled colour weather station impresses with practical functions such as a frost warning, which alerts you to cold temperatures in good time. The high/low value alarm also automatically informs you of your own temperature limits. With the max./min. value memory for temperature and humidity, you can easily keep track of fluctuations. Chic and informative – look forward to always precise weather data with the BRESSER Radio-Controlled Colour Weather Station with Frameless Display! FEATURES OF THE BASE STATION Frameless weather station with integrated DCF radio clock Indoor temperature and humidity Display of outdoor temperature and humidity Graphical weather forecast Air pressure Room climate comfort indicator High/low value alarm for temperature Max./min. value memory for temperature and humidity Frost warning Automatic time and date setting (DCF, manual setting possible) Alarm clock with snooze button Power supply: mains adapter (included), 2x AAA backup batteries (not included) PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting. FEATURES OF THE RADIO SENSOR Measurement of temperature and humidity Clear LCD display Range: up to 80 m IP protection class: IP44 Dimensions: 71 x 65 x 23 mm; Weight: 44 g Battery-powered: 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Weather station Outdoor sensor Operating instructions

FEATURES5.7'' colorful display for time and detailed weather informationWIFI connection with internet time synchronizationReceives weather data from 5in1 profi sensor and from wireless thermo-hygro sensor via 868 MHz transmissionPublish local weather station data on weather underground and weather cloudDisplays time, calendar, weekday and moon phaseAlarm clockIce pre-alert functionIndoor temperature (°C/°F) and humidity with comfort indicationOutdoor/Channel’s temperature (°C/°F) and humidity readingsGust or average wind speedWind direction (16-direction indicator)Rain rate (hourly, daily, weekly, monthly, total rainfall)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Barometric pressure in relative or absolute readings (hPa, inHg, mmHg)Smart outdoor “Feels like” sensation readingWeather index for outdoor feels like, dew-point, Wind chill, Heat indexMax/Min memory records and past 24 hours (hourly record)Hi/Lo alert with flash LED indicatorWeather calibration (on set-up UI)3-mode brightness: Hi / Lo / Off7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU)Support firmware update (TBC)Support a wireless 5-in-1 professional weather sensor (Included)Support up to 7 pcs wireless extra sensors (Optional) (item no. 7009999) DELIVERY SCOPEMain unitProfessional 5in1 sensor incl. mounting material100-240V/50 Hz power adapter and cable

An exclusive Bresser designed weather station, the BRESSER 7-in-1 Weather Station ClimateScout RC Weather Station. A quick glance in the morning onto your BRESSER weather station gives you all the weather information you need for the day. Your current local outdoor temperature and humidity are shown as well as the current wind speed and direction. How much did it rain during the night? These and many others of the frequently asked weather questions are answered by a quick look onto the main station's display. Have you ever wondered why temperatures feel differently outside then you had imagined it would feel like? The new Feels Like Feature will help you with that. It takes the heat index or windchill into consideration and provides a calculated result to give you a much better indication of how the current weather actually feels outside. It sure beats running in and out and having to change clothing. The Wind Gauge has been optimized and now measures in 360° and 16 directional points, giving you very precise wind readings. Furthermore, the radiation shield has been upgraded to enhance the temperature and humidity sensor circulation. All in all this 7-in-1 complete set of weather station main unit and professional 7-in-1 weather sensor is the perfect weather station for those that want accurate and up to date information.  FEATURES (main unit):Clear professional display for time & full weather information Receive your local weather data via the 7-in-1 weather sensor via 868 MHz RF transmission frequency RCC time synchronization & automatic switch between standard and daylight saving time (DCF) For UK Users who can receive the European DCF time synchronization signal the time can be automatically received using the UK time offset functionBuzzer alarm clock with ice pre-alert function Display time, calendar, weekday & Moon phaseAble to set the moon phase display for Northern / Southern hemisphere Buzzer alarm clock with ice pre-alert function Indoor temperature (°C/°F) & humidity readings with comfort indication & trend Outdoor temperature (°C/°F) & humidity readings with trend Gust or Average wind speed (mph, m/s, km/h, knots), Beaufort & wind level Real time & dominant wind direction in 360° & 16-direction resolution UV index (0 – 16) Light intensity reading (Klux, Kfc, W/m2) Measure Rain rate, Hourly, Daily, Weekly, Monthly, Total rainfall (in/ mm) with indicator Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Barometric pressure in relative or absolute readings (hPa, inHg, mmHg) Weather index for outdoor feels like, heat index, wind chill, dew point readings Max / Min memory records & past 24hrs hourly record Hi / Lo alert setting (indoor/ outdoor temperature & humidity) Alert setting (weather index, High wind-speed, High daily rainfall & Pressure drop) Flashing indicator for Hi/Lo alert warning on the LCD display UV and light calibration 5 languages for weekday and wind direction display (EN/ DE/ FR/ ES/ IT) Amber backlight Long-range transmission up to 150m (450 ft.) Supports up to 3 pcs wireless extra sensors , for instance 7009999 Thermo-/Hygrometer Outdoor Sensor, Pool Sensor SP6001LC2000, or Soil Sensor SP60020LC2000 (Not included) Wall mount/ desktop usage Product size: Main unit: 180 x 136 x 23 mm (W x H x D) Display VA size: 125x77mm (W x H) Battery requirements: Main unit: 4x AA ; Sensor 3x AA  (Not included)FEATURES (7-in-1 SENSOR)Measurement of Outdoor Temperature and Humidity, Wind Speed and Direction, Rain Gauge, UV and Light Intensity MeasurementUp to 150 m transmission range using 868 MhZ transmission frequencyShould be placed in an unobstructed location so that sun and rain data can be used properlyCan be mounted on wall or post using the included adapterProduct size: Sensor: 344 x 394 x 136 mm (W x H x D) SCOPE OF DELIVERY1x Main Unit, additional main units can be purchased using the BRESSER item codes 7003110CM3000 (black housing), 7003110GYE000 (white housing), 700311QT5000 (grey housing)1x wireless 7-in-1 Professional Weather Sensor including mounting stand

Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for Smarthome owners: The sensor can be connected to the system of the market leader Tuya. Suitable for the following BRESSER weather stations: 7902535, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003230, 7003210, 7003200, 7003220, 7003510, WSX5003, 7002531, 7002571, 7003100 Compatible with the following BRESSER weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 7002580, 7002581 und 7002585/WSX1001 FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

With the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1 you’ll never find yourself left out in the cold by the weather again. The weather station, with 7-in-1 solar outdoor sensor, supplements the on-site data with plenty of practical information from the ProWeatherLive platform. A special highlight: the extensive weather forecast, with the outlook for the next 11 days and a detailed overview of the next 24 hours. Information on local visibility and cloud cover also helps passionate amateur meteorologists to keep a close eye on the weather. You’ll always be up to date, whenever and wherever you are – choose to view your data, incl. max./min. values, conveniently on the clear display of the weather station, in the ProWeatherLive app or in a web browser. Environmentally-friendly and user-friendly – weather station with solar sensor Quick to install and connect to the base station, the 7-in-1 wireless sensor reliably supplies data measured directly on site, including temperature, humidity, wind speed, wind direction, precipitation amount, UV level and light intensity. Meanwhile, the power of the sun ensures smooth operation via the large solar panel. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. A comfortable indoor climate with the WiFi weather station Outdoors, the weather station puts in a great performance with anemometer and rain gauge as well as thermometer and hygrometer, UV and light sensors. What about the climate indoors? A thermo-hygro sensor has been integrated into the base station so that you can always keep an eye on the indoor temperature and humidity. The trend display, which can be called up directly on the display, is perfect for preventing excessively dry air or mould. Trends you will be able to see include development of the room climate, so that you can respond by introducing fresh air or by humidifying if you need to. In addition, with ProWeatherLife, you can receive notifications when the indoor temperature and humidity change, as well as important weather parameters. Optional extensions for your WiFi weather station Want to adapt your weather station to your needs? No problem! It comes with a range of optional extensions through the following additional sensors (not included): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detector and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality For the perfect extensions, browse our BRESSER accessories to see which additional sensors are compatible (not included). Stay up to date on your local weather and indoor climate easily, whenever and wherever, with the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1. BASE STATION FEATURES Graphic weather forecast for the next 11 days (today and next 10 days)/for 24 hours (now and next 23 hours) from the ProWeatherLife server 11-day forecast for maximum and minimum temperature, as well as average temperature and chance of precipitation from the ProWeatherLife server Local visibility and cloud cover via the ProWeatherLive server WiFi connection for publishing local weather data on ProWeatherLive and up to 2 other weather platforms (e.g. AWEKAS) Indoor temperature (°C/°F) and humidity with trend Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Trend graph for air pressure, precipitation, temperature (indoor/outdoor) or humidity (indoor/outdoor) on the display Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Wind gusts and average wind speed, Beaufort scale (wind speed scale) Sunburn time display Air pressure Set weather notifications via the ProWeatherLive server Maximum/minimum value memory Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm clock with frost alarm WSLink app for easy connection to WiFi and weather platform, weather data calibration and for firmware updates 7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU) Supports additional optional sensors Power supply: Mains plug (included), CR2032 back-up battery (not included) FEATURES OF 7-IN-1 OUTDOOR SENSOR Measurement of temperature, humidity, wind speed, wind direction, precipitation quantity, UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included)Range: 150 mSize: 390 x 174 x 465 mm SCOPE OF DELIVERY Base station Solar-powered outdoor sensor Power adapter Instruction manual

When it comes to your well-being, don't settle for less – this includes maintaining a healthful environment. Keep your indoor climate in check with the BRESSER Thermo-Hygrometer with Mould Alert. It accurately measures temperature and humidity and impresses with comprehensive warning functions. You'll always know when to heat, ventilate, humidify, or dehumidify. Mould prevention made easy – with the BRESSER Thermo-Hygrometer Especially in older buildings or during the cold months, it sometimes creeps into the basement or living area: mould. This temperature and humidity measuring device warns you when the conditions for mould growth are particularly favourable. So with the thermo-hygrometer at your disposal, you can swiftly and efficiently take measures to ward off mould in your environment. Thermometer and hygrometer with handy alert features This BRESSER Thermo-Hygrometer quickly becomes an invaluable guide for your well-being. The clear display shows the integrated heat warning, which alerts to unfavourable levels of high temperature and humidity. Ideal for individualists: set a personalised humidity alert to be informed when your specific humidity thresholds are crossed. Take control of your indoor climate now - with the BRESSER Thermo-Hygrometer with Mould Alert! FEATURES Thermo-Hygrometer with mould and heat warnings Measures indoor temperature and humidity Five-level colour-coded climate indicator Graphical humidity trend history High/low humidity alarm settings Battery-powered: 2x AAA (Micro), 1.5V (not included) SCOPE OF DELIVERY Thermo-Hygrometer Instruction manual

Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. Compatible with these BRESSER weather stations: 7000023, 7007201, 7004200, 9604200, 7007511, 9600028, 7000012CM3000, 7000012GYE000, 7000013, 9070600, 7000028, 7007402, 9070700, 9604210, 7004210, 7006500, 9604100, 9070300, 9070110, 7007520, 9070710, 7000030, 7007610, 7000002, 7000004, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7001800QT5000, 7001800CM3000, 7001800GYE000, 7007550CM3000, 7007600QT5000, 7000022CM3000, 7007500, 7007501, 9080600, 8020210GYE000, 8020210CM3000, 7004330, 7004340, 7006310, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7004220, 7000027, 7000029, 7000060, 7004350, 7004360, 7004370, 7004380, 7006510, 7007350, 7007620, 7000012CM3000, 7000012GYE000 FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44 Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

The NATIONAL GEOGRAPHIC VA colour weather station with 4 measuring points in black displays all relevant weather data at a glance. The set includes 3 outdoor sensors and one built-in sensor. On the clearly arranged colour display you will find information such as temperature and humidity for indoor as well as outdoor, as well as the exact time via DCF radio transmission. Besides the built-in sensor in the console unit (display) the station is able to receive the temperature and humidity readings from three additional sensors which are included in this set. Its use is therefore very versatile as the sensors can be placed either in- or outdoors. What's the temperature in the kids room, is the basement too moist how cold is it outside? All these questions can be viewed on one display. The station has a time offset function, so although parts of the UK are technically able to receive the European DCF time signal (southern England), your station will be displaying the UK time. For all parts of the UK where the time signal can not be received the time can easily be set manually with this station. The featured weather forecast is for the coming 12-24h. FEATURES BASE STATION LCD colour display Indoor temperature (°C/°F) and humidity Outdoor temperature (°C/°F) and humidity Display of time, date and weekday Time by DCF radio signal with time offset function for the UKWeather Forecast Maximum connectable sensors: 3 (3x included!) Hanging device and stand Power supply: Power plug with UK adapter (included) FEATURES SENSOR Measurement of outdoor temperature (°C / °F) and humidity LCD displayRange up to 80 m Can be placed on a table or wall-mountedPower supply: 2x AAA batteries per Sensor (not included)  Dimensions: 71 x 65 x 23 mm; weight: 44 gSCOPE OF DELIVERY Weather station 3x outdoor sensors Instruction manual

This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 9080800 FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

With the BRESSER Wireless Weather Station ClimateTemp NDV-NEO, you are always prepared for the climatic conditions both in front of and behind your front door. The weather station reliably measures the temperature and humidity both indoors and outdoors and provides you with a precise weather forecast. In addition, the device looks really stylish. Practical additional features such as frost warning and temperature alarm help you navigate through your daily weather-related challenges. Stay up-to-date with reliable weather forecasts! Do you need an umbrella today or maybe sunscreen? With the graphical weather forecast of the BRESSER weather station, you will know right away and can plan your activities accordingly. You can also keep an eye on the weather trend with the air pressure display with history. Top indoor climate thanks to the weather station for home and more. Only where humidity and temperature are right can we feel comfortable in the long run. That’s why the base station of the ClimateTemp NDV-NEO has an integrated thermo-hygro sensor. This allows you to easily monitor the indoor climate in your home or office: Just regularly check the precise measurements for indoor temperature and humidity and adjust your ventilation habits accordingly. This way, you can prevent mold growth and overly dry air and breathe easy! Weather station with outdoor sensor: Weather information first-hand A real powerhouse of the weather station is the high-quality sensor. It reliably measures the outdoor temperature and humidity, with the high range of up to 80 meters offering a lot of flexibility in positioning. The data can also be read directly on the integrated display. So you can get an update quickly even in the garden or on the terrace. Moreover, the sensor is water-resistant to IP44 – ideal for outdoor use. Weather station with cool features for hot and cold days The BRESSER wireless weather station has many useful functions that make your daily life easier. For instance, the frost warning alerts you to frosty temperatures on cool days. You can get an overview of the development of humidity and temperature from the max./min. value storage. And the high/low value alarm notifies you when your chosen temperature limits are reached. Bring style to your weather forecast – with the BRESSER Wireless Weather Station ClimateTemp NDV-NEO! BASE STATION FEATURES Indoor temperature and humidity (°C/°F) Display of outdoor temperature and humidity (°C/°F) Graphical weather forecast Air pressure with graphical history High/low value alarm for temperature Max./min. value storage for temperature and humidity Frost warning Automatic time and date (manual setting possible) Integrated alarm clock with snooze function Moon phase Power supply: Power adapter (included) and 3x AAA backup battery (not included) PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting. SENSOR FEATURES Measurement of temperature and humidity Clear LCD display Range: up to 80 m IP protection class: IP44  Dimensions: 71 x 65 x 23 mm / Weight: 44 g Battery operated: 2x AAA batteries (not included) SCOPE OF DELIVERY Base station 1x wireless sensor Power adapter User manual