LUNT LS80MTBP&F Conversion Kit for LS80MT

​Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1200 blocking filter.Solar observing in H-alpha:The LS80MT/B1200 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.Blocking-filter is the B1200. The B1200 is good for visual solar observing. Also solar imaging is possible by cameras with small sensor chip. We recommend a LS80MT with B1800 blocking-filter by using cameras with large sized sensor chips.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B1200 with 1.25" and T2 connectionFocuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-TunerB1200 blocking filter in star-diagonal housing2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1800 blocking filter.Solar observing in H-alpha:The LS80MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.Blocking-filter is the B1800. The B1800 is very good for visual solar observing and also for photography.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B1800 with 1.25" and T2 connectionFocuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-TunerB1800 blocking filter in star-diagonal housing2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!

A very good diagonal mirror for telescopes with 2" focuser and for the BRESSER Messier telescopes with a 2.5"- HEX focuser. Enables the use of eyepieces and accessories with 2" barrel, so that a wider field of view can be reached. A larger light beam and a comfortable observation position is achieved by this 2 inch zenith mirror. Especially for use with refractors and for zenith observations a useful accessory.  The clamping ring is made of brass, so there will be no scratch marks on your high-quality eyepiece. The precise clamping is another advantage. The BRESSER 2" Diagonal Mirror is completely made of metal and has a very accurate flat mirror. The dielectrical coating delivers a 93% reflectance and is very durable against enviromental influences. FEATURES Star diagonal mirror for focuser with 2" barrel High quailty flat mirror Dielectrical mirror coating delivers a 93% reflectance Very durable against enviromental influencesEyepiece adapter 1.25/2.0 inch includedBrass eyepiece clamping ring Housing completely made of metal Dust caps included SCOPE OF DELIVERY diagonal mirroreyepice adapter 1.25/2.0 inch dust caps

Herschel-wedge / Solar-wedge for superior White-Light solar observing and imaging. For refractor-telescopes up to 150mm aperture, and with 2'' focuser. Complete system with installed ND3.0 filter.Herschel-Wedges will be used to observe the sun in White-Light. Around 95 % of the sun light will be suppressed by the Herschel Wedge. The remaining sun light will be dimmed by a fix installed ND3.0 grey filter. Lunt Solar Systems Herschel-wedges are installed in a fully closed housing with integrated heat trap. There is no stray light escaping, therefore it is very safe.The difference between Herschel-wedges and normal front mounted filters is, that the filtering takes place just before the eyepiece or camera. This will provide a better contrast and sharpness of the solar image.Furthermore, there is more safety at a Herschel-wedge than at a front mounted filter. A Herschel-wedge can not rip or become holes like a foil. And also it can not drop down from the telescope objective accidentally.Only for use with refractor telescopes up to 150mm aperture:Because the full energy and heat of the sun will be inside the telescope, we advise to use only refractors with a Herschel-wedge. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflector telescopes, become very hot by the concentrated solar energy and could be damaged.Tuning the brightness:Because the Herschel-wedge produce polarized light, you can use a normal polarizing filter at the eyepiece or camera-adapter. By turning the polarizing filter the brightness will be reduced.Polarizing filter not included. We recommend the BRESSER 2'' polarizing filter 4946465.FEATURESFor refractor-telescopes up to 150mm apertureConnection to telescope: 2''Connection to eyepiece: 2''90° housing like star-diagonalEspecially high-quality optical surfaces for very good contrastFully closed housing with integrated heat trapNo stray light escaping - therefore it is very safeThe needed ND3.0 filter is fix installedSCOPE OF DELIVERYHerschel-wedge for 2'' focuserIntegrated ND3.0 filterHardcaseInstruction manual

This Herschel wedge is designed for superior White-Light solar observing and imaging. It can be used with refracting telescopes up to 102mm aperture, with 1.25'' focuser. This complete system comes with installed ND3.0 filter.Herschel Wedges are used to observe the sun in White Light. Around 95% of the Sun's light is suppressed by the wedge's ceramic prism. The remaining sun light is dimmed further by a factory-installed ND3.0 grey filter. Lunt Solar Systems Herschel wedges are installed in a fully closed housing with integrated heat trap. No stray light can escape from this, therefore it is very safe method of observing our nearest star.The difference between Herschel-wedges and normal front mounted filters is that the filtering takes place just before the eyepiece or camera. This provides better contrast and sharpness of the solar image - with more surface detail visible as a result.  Furthermore, a Herschel wedge is inherently safer than at a front mounted filter. A Herschel wedge can not rip or become punctured like a foil filter can be and it cannot become detached from the telescope objective accidentally.Only for use with refractor telescopes up to 102mm aperture:Because the full energy and heat of the sun inside the telescope, we advise solely using refractors for Herschel-wedge use. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflecting telescopes, could suffer from thermal build-up by concentrated solar energy and could be permanently damaged.Tuning the brightness:Because the Herschel-wedge produces polarised light, you can use a normal polarising filter at the eyepiece, or camera-adapter. By turning the polarising filter the image brightness can be varied to the user's liking.This additional Polarising filter is not included. We recommend the BRESSER 1.25'' polarising filter, no: 4946464.FEATURESFor refractor telescopes up to 102mm apertureConnection to telescope: 1.25''Connection to eyepiece: 1.25''90° housing like star-diagonalEspecially high-quality optical surfaces for very good contrastFully closed housing with integrated heat trapNo stray light escaping - therefore it is very safeThe needed ND3.0 filter is fix installedWHAT'S INCLUDEDHerschel-wedge for 1.25'' focuserIntegrated ND3.0 filterTransport caseInstruction manual

Calcium-K module in star diagonal, for using normal astronomical telescopes up to 100mm aperture and up to 1080mm focal length as Ca-K solar telescopes.This Calcium-K module transforms your normal astronomical refractor telescope into a Ca-K solar telescope. It will be very easy: Put the Ca-K module into the 2" focuser of your telescope, and you are ready for solar observing in the light of the Calcium-K wavelength.Internal narrowband filters allow for a <2.4 Angstrom bandwidth. For refractor telescopes up to 100mm aperture and up to 1080mm focal length. For imaging it will be better to use a bigger Ca-K module.The Ca-K module is in a 90° star diagonal, for 2" focuser on the telescope side, and with T2 thread and 1.25" eyepiece connection on the eyepiece side.All needed filter parts are integrated inside the compact module. There are no additional filters needed.The Ca-K wavelength is at the edge of the visible light spectrum for human eyes, so for many people visual observing is difficult. However, all details could be captured photographically. Therefore the Ca-K Module is optimized primarily for imaging.FEATURESBandwidth <2.4 AngstromUsable at telescopes up to 100mm aperture and 1080mm focal90° star-diagonal housing2" slide tube for 2" focuserConnection for 1.25" eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYCa-K module in 90° star diagonal for 2" focuserIntegrated blocking filter B1200 for telescopes up to 1080mm focal lengthInstruction manual

Calcium-K module in straight extension tube, for using normal astronomical telescopes up to 100mm aperture and up to 1080mm focal length as Ca-K solar telescopes.This Calcium-K module transforms your normal astronomical refractor telescope into a Ca-K solar telescope. It will be very easy: Put the Ca-K module into the 2" focuser of your telescope, and you are ready for solar observing in the light of the Calcium-K wavelength.Internal narrowband filters allow for a <2.4 Angstrom bandwidth. For refractor telescopes up to 100mm aperture and up to 1080mm focal length. For imaging it will be better to use a bigger Ca-K module.The Ca-K module is in a straight extension tube, for 2" focuser on the telescope side, and with T2 thread and 1.25" eyepiece connection on the eyepiece side.All needed filter parts are integrated inside the compact module. There are no additional filters needed.The Ca-K wavelength is at the edge of the visible light spectrum for human eyes, so for many people visual observing is difficult. However, all details could be captured photographically. Therefore the Ca-K Module is optimized primarily for imaging.FEATURESBandwidth <2.4 AngstromUsable at telescopes up to 100mm aperture and 1080mm focalStraight extension tube housing2" slide tube for 2" focuserConnection for 1.25" eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYCa-K module in straight extension tube for 2" focuserIntegrated blocking filter B1200 for telescopes up to 1080mm focal lengthInstruction manual

Calcium-K module in star diagonal, for using normal astronomical telescopes up to 100mm aperture and up to 1620mm focal length as Ca-K solar telescopes.This Calcium-K module transforms your normal astronomical refractor telescope into a Ca-K solar telescope. It will be very easy: Put the Ca-K module into the 2" focuser of your telescope, and you are ready for solar observing in the light of the Calcium-K wavelength.Internal narrowband filters allow for a <2.4 Angstrom bandwidth. For refractor telescopes up to 100mm aperture and up to 1620mm focal length. For imaging it will be better to use a bigger Ca-K module.The Ca-K module is in a 90° star diagonal, for 2" focuser on the telescope side, and with T2 thread and 1.25" eyepiece connection on the eyepiece side.All needed filter parts are integrated inside the compact module. There are no additional filters needed.The Ca-K wavelength is at the edge of the visible light spectrum for human eyes, so for many people visual observing is difficult. However, all details could be captured photographically. Therefore the Ca-K Module is optimized primarily for imaging.FEATURESBandwidth <2.4 AngstromUsable at telescopes up to 100mm aperture and 1620mm focal90° star-diagonal housing2" slide tube for 2" focuserConnection for 1.25" eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYCa-K module in 90° star diagonal for 2" focuserIntegrated blocking filter B1800 for telescopes up to 1620mm focal lengthInstruction manual

Calcium-K module in straight extension tube, for using normal astronomical telescopes up to 100mm aperture and up to 1620mm focal length as Ca-K solar telescopes.This Calcium-K module transforms your normal astronomical refractor telescope into a Ca-K solar telescope. It will be very easy: Put the Ca-K module into the 2" focuser of your telescope, and you are ready for solar observing in the light of the Calcium-K wavelength.Internal narrowband filters allow for a <2.4 Angstrom bandwidth. For refractor telescopes up to 100mm aperture and up to 1620mm focal length. For imaging it will be better to use a bigger Ca-K module.The Ca-K module is in a straight extension tube, for 2" focuser on the telescope side, and with T2 thread and 1.25" eyepiece connection on the eyepiece side.All needed filter parts are integrated inside the compact module. There are no additional filters needed.The Ca-K wavelength is at the edge of the visible light spectrum for human eyes, so for many people visual observing is difficult. However, all details could be captured photographically. Therefore the Ca-K Module is optimized primarily for imaging.FEATURESBandwidth <2.4 AngstromUsable at telescopes up to 100mm aperture and 1620mm focalStraight extension tube housing2" slide tube for 2" focuserConnection for 1.25" eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYCa-K module in straight extension tube for 2" focuserIntegrated blocking filter B1800 for telescopes up to 1620mm focal lengthInstruction manual

​Field-flattener and focal length reducer for deep-sky astrophotography. Designed for the multipurpose APO telescopes of the Lunt-Solar-Systems LS80MT, LS100MT and LS130MT series.At the telescopes of the MT series from Lunt Solar Systems, the H-Alpha filter unit for solar observation can be removed, then these telescopes can be used as high quality ED APO's for observing and photographing the night sky.This accessory for the LS80MT, LS100MT and LS130MT telescopes shortens the focal length by a factor of 0.8x, providing a larger field of view for deep-sky astrophotography. This also allows shorter exposure times. At the same time, the field of view is flattened for photography.On the camera side, the reducer/field-flattener has a T2 male thread (M42x0.75). DSLR cameras can be connected here directly with a normal T2 ring.For other cameras, an M48x0.75 male thread is available in addition to the T2 male thread. The distance between reducer/field-flattener and camera sensor should be around 50 to 55mm.An M64x1 thread is provided on the telescope side. This allows to connect the reducer/field flattener to the focusers of the conversion kits for the LS80MT, LS100MT and LS130MT telescopes. Please note that for using the reducer/field flattener at the LS80MT, LS100MT or LS130MT telescopes, the corresponding conversion kit for night-time use of the telescope is absolutely necessary..FEATURESShortens focal length of F/7 ED telescopes by a factor of 0.8xFlattened field of view for photographyT2 thread and M48x0.75 thread for camera connectionWorking distance 50 to 55mmSCOPE OF DELIVERY0.8x reducer/field-flattenerAdapter to T2 thread (M42x0.75) and to M48x0.75