LUNT B1800s Blocking-Filter in extension tube

For free combination with a Lunt-Solar-Systems H-alpha solar-telescope or -filter

  • Blocking-filter in straight extension tube
  • For combination with H-alpha telescopes or filters
  • For telescopes up to 1620mm focal length & 1.25 or 2 inch focuser
  • Eyepiece side with T2 thread and 1.25 inch eyepiece connection
  • Cannot be used stand-alone, only with H-Alpha systems!

€1,998.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Privacy
Product number: 0553011
GTIN/EAN: 4007922035857
WEEE-Reg.-Nr.: DE 34716369

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners— but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Product information "LUNT B1800s Blocking-Filter in extension tube"
Blocking-filter in straight extension tube, for telescopes up to 1620mm focal length. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!

Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.

The B1800s is installed in a straight extension tube, for 1.25 inch (31.7mm) and 2 inch (50.8mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B1800s can be used at LUNT H-alpha systems, if the used telescope has up to 1620mm focal length.

The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.
At the tab ''Accessories'' you will find H-Alpha telescopes and filters with which this blocking filter can be combined.

FEATURES
  • Blocking-filter only usable at additional H-alpha filter system
  • Filter diameter: 18mm
  • Usable at telescopes up to 1620mm focal
  • In straight extension tube
  • For 1.25 inch and 2 inch focuser
  • Connection for 1.25 inch eyepieces
  • T2 thread for camera connection
SCOPE OF DELIVERY
  • Blocking-filter B1800s in straight extension tube

Colour: black
Material: Aluminium

Accessories

LUNT LS50FHa H-alpha double-stack solar filter
50mm H-alpha double-stack solar filter, for all LS50FHa filter-systems and LS60THa/LS60MT telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS50FHa filter-systems and LS60THa / LS60MT telescopes. Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom (dependent upon used telescope). So you will have much more contrast and more details on the sun will be visible.Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.75 Angstrom.FEATURESAperture: 50 mmNo central obstructionBandwidth double stacked: <0,55 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 73 mmWeight: 0.7 kgFront thread: M90x1 female threadRear thread: M90x1 male threadSCOPE OF DELIVERYLS50FHa solar filterTransport caseInstruction manual

€1,949.00*
LUNT LS60FHa H-alpha double-stack solar filter
60mm H-alpha double-stack solar filter, for all LS60FHa filter-systems and LS60THa/LS60MT telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS60FHa filter-systems and LS60THa / LS60MT telescopes. Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom (dependent upon used telescope). So you will have much more contrast and more details on the sun will be visible.Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.75 Angstrom.FEATURESAperture: 60 mmNo central obstructionBandwidth double stacked: <0,55 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 85 mmWeight: 0.85 kgFront thread: M90x1 female threadRear thread: M90x1 male threadSCOPE OF DELIVERYLS60FHa solar filterTransport caseInstruction manual

€3,398.00*
LUNT LS100FHa H-alpha double-stack solar filter
100mm H-alpha double-stack solar filter, for all LS100FHa filter-systems and LS100THa telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS100FHa filter-systems.Also the LS100THa H-alpha solar telescopes can be very easily double-stacked by using this 100mm double-stack filter. This combination offers high quality double-stacking to the observer.Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom. So you will have much more contrast and more details on the sun will be visible.Please note: The LS100FHa double-stack filter is only compatible with the old LS100THa H-alpha telescopes, but not with the new LS100MT multipurpose telescopes!Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.7 Angstrom.FEATURESAperture: 100 mmBandwidth double stacked: <0.55 AngstromTuning: tiltable EtalonHousing diameter: 162 mmLength: 101 mmWeight: 2.75 kgFront thread: M120x1.5 female threadRear thread: M120x1.5 male threadSCOPE OF DELIVERYLS100FHa solar filterTransport caseInstruction manual

€10,990.00*
LUNT LS80MT/R&P Multipurpose APO Telescope OTA without Blocking Filter
​Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system and good 2 inch (50.8mm) R&P focuser. Delivered without blocking filter, use for H-Alpha sun observation only possible with additional blocking filter!This telescope is supplied without blocking filter. We offer a wide range of additionally available blocking filters in different sizes, either mounted in a 90° star-diagonal housing or in a straight extension tube. These are all usable with this telescope.ATTENTION: Without such an additional blocking filter you cannot use this telescope for H-alpha solar observation!Solar observing in H-alpha:The LS80MT is a telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.This version of the LS80MT is delivered without blocking filter. Therefore an additional blocking filter is required to use the telescope for solar observation in the H-alpha wavelength. You can choose from the wide range of Lunt Solar Systems blocking filters and decide for example if you want a blocking filter in a 90° star-diagonal housing or one in a straight extension tube.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerSupplied without blocking filter, additionally available blocking filter absolutely necessary!Focuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-Tuner2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!

€6,398.00*
LUNT 2" Slide-Tube for blocking filters
2" slide-tube, adapts LUNT Solar Systems 1.25" blocking-filter in star diagonal to telescopes with 2" focuser.FEATURESThread to blocking-filter: T2Length 2" slide-tube: 80 mmSCOPE OF DELIVERYAdapter 1.25" LUNT Blocking Filter to 2" focuser(Blocking-filter not included)

€48.00*

Similar products

LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters
​Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters

€15.00*
LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€5.00*
LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes
​Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa

€5.00*
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€2.50*
Adapter T2 to 2", for 2" eyepieces to blocking filter
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)

€29.00*
%
LUNT Heating Module for Blocking-Filter
At very cold temperatures, blocking filters may no longer work accurately central in the H-alpha wavelength, which means that the details on the sun become less visible. With this Heating-Module you can counteract this effect and observe the sun in the H-Alpha line optimally even at cold temperatures.The Heating-Module is for use with blocking filters in 90° star-diagonal housing from Lunt Solar Systems. It cannot be used at blocking filters in straight extension tube.The Heating-Module has an internal battery which allows for about 1 to 1.5 hours of operation. The battery can be recharged with the supplied USB cable.FEATURESAllows optimal observations in the H-alpha line even at very cold temperatures with blocking filters from Lunt Solar SystemsOperating time about 1 to 1.5 hoursInternal battery can be charged via USB cableCan also be used as a portable charger to power small electronic devicesInput (IN): 5V 2AOutput (OUT): 5V 2ACapacity: 5000mAhSCOPE OF DELIVERYLSBHEATER Heating-Module for Blocking-FiltersMounting screwsHexagon wrenchUSB cableInstruction manual(Blocking-filter not included!)

€249.00* €399.00* (37.59% saved)
LUNT O-ring 32mm for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€5.00*
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm

€299.00*
LUNT LS300PS Dovetail Bar 300mm (GP level)
This dovetail plate with 300mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.Technical data:• Length: 300mm• Width: 44mm• Distance between screws: 35mm• Screws thread: 1/4"-20Delivered by order:• 1 x 300mm dovetail plate• 2 x 1/4"-20 screws

€113.00*
LUNT CAP Baseball Cap for sun protection
Always keep a cool head when observing the sun with the baseball cap from Lunt Solar Systems. The large shield shades the face well, while vents keep you cool. Made of 100% cotton, with Lunt Solar Systems logo on front.FEATURESBaseball cap with large shieldmaterial: 100% cottonprotects from sunburn while observing the sunadjustable strap with buckle in backSCOPE OF DELIVERYBaseball cap

€49.00*
LUNT B3400 Blocking-Filter in 2 inch extension tube
Blocking-filter in straight extension tube, for telescopes up to 3060mm focal length. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B3400 is installed in a straight extension tube, for 2 inch (50.8mm) focuser on the telescope side, and with 2 inch eyepiece connection and 1.25 inch (31.7mm) adapter on the eyepiece side. The B3400 can be used at LUNT H-alpha systems, if the used telescope has up to 3060mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 34mmUsable at telescopes up to 3060mm focalIn straight extension tubeFor 2 inch focuserConnection for 2 inch eyepiecesAdapter for 1.25 inch eyepiecesSCOPE OF DELIVERYBlocking-filter B3400 in 2 inch straight extension tubeAdapter for 1.25 inch eyepieces

€3,498.00*
LUNT Sol Searcher
Sol-Searcher for installing on all solar telescopes of Lunt Solar Systems. The tube rings of the LUNT solar telescopes are prepared for the mounting of this Sol-Searcher."I can't find the Sun!" sounds funny. However, the Sun is tricky to find in a properly filtered telescope, and you don't ever want to chance a direct gaze, let alone a magnified image of it.This Sol-Searcher is the safe and easy way to find the Sun. It is absolutely safe since you don't look through Sol-Searcher, you look at it. The aperture acts as a "pinhole" which projects an image of the Sun on to the 1/4" translucent "screen." This screen can be viewed from either side. Simply move your scope until the Sun's image is centered on the screen and the Sun will be in the eyepiece's field of view.The solar telescopes from Lunt Solar Systems are fitted for installing this Sol-Searcher. Only at the LS130MT and LS152THa telescopes the additionally adapter 0554302 will be needed.SCOPE OF DELIVERYTeleVue Sol-SearcherScrewsHexagon wrench

€59.00*