EXPLORE SCIENTIFIC Teleextender 5x 31,7mm/1.25"

With the usage of barlow lenses, you can extend the equivalent focal length of telescopes and hence increase the magnification of your observed targets. Subsequently, you can use lower power eyepieces in Barlows to act as much more powerful eyepieces, but retain the larger ocular size and more comfortable viewing that comes with lower power eyepiece designs.Due to their two lens design, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.  The black coloured Barlow element cell in this BRESSER Barlow Lens 2x 31.8mm/1.25," can be unscrewed and has the same thread as 1.25" filters, allowing it to be mounted in 1.25" eyepieces, t-adapters and other accessories, giving you flexibility of use and the ability to vary magnification in different accessories.  For instance, the black Barlow cell screwed into the average length nosepiece of a standard push fit t-adapter will give around 1.6x magnification on an attached DSLR.  This can be very useful when trying to get to photographic focus with some Newtonians and Solar Telescopes, which lack the necessary amount of in focus travel to get a camera to a prime focus position.FEATURESsuitable for observations and photographydoubling of the focal lengthtwo lens designfully multi-coatedWHAT'S INCLUDEDBarlow lens (1pc)

The magnification of your telescope can be trippled with the use of this achromatic BRESSER Barlow Lens 3x 31.7 mm (1.25'').

This Barlow lens doubles the focal length of your telescope. It allows you to make astronomical observations with a higher magnification than a conventional eyepiece. Thanks to the Barlow lens between the eyepiece, you can obtain a greater magnification whilst maintaining a comfortable interpupillary distance.This Vixen 2x Barlow lens is ideal for observing and photographing lunar landscapes and details on the brighter planets. The Barlow lens also features a T2 connection for photography with DSLR cameras. With T2 extension tubes, it can also be used as a camera projection adapter.With a deflecting prism, the Barlow lens enables you to obtain a magnification factor of 3.3x.FEATURES2x Barlow lenses with T2 thread2-lens optical systemDoubles the magnification factorAlso suitable as a camera adapter31.7 mm sleeveWeight: 80 gDELIVERY CONTENT 2x Barlow lenses Dust caps

With the usage of barlow lenses, you can extend the focal distance of telescopes and enhence the magnification of your observated deep sky objects. Thus, you can use the advantages of eyepieces with greater focal distance like the long eye relief as well as a more convenient insight at higher magnifications. Due to their 3-element air-spaced lens design with ED glass, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.FEATURESsuitable for observations and photographyincrease fivefold the focal distance3-element air-spaced lens design with ED glassfully multi-coated brass eyepiece clamping ringSCOPE OF DELIVERYBarlow lens (1pc)

With teleextenders it is possible to extend the effective focal length of a telescope system, resulting in higher magnification for the observation of the moon, the planets or small Deep-Sky objects with the same eyepieces. So you can use the advantages of eyepieces with longer focal length - such as the bigger eye distance and the more relaxed observing comfort - at high magnifications also.These teleextenders incorporate a telecentric optical design that deliveres a excellent image sharpness over the whole field of view and are premium choices for visual observations and astrophotography. The combination of excellent fully multicoating with superior optical design makes the Focal Extenders superior to classic Barlow lenses.Features: Suitable for visual observations and astrophotographyDoubling the effective total focal length of the telescopeFour lens telecentric design Fully multicoatedFilter thread for color or nebula filters

Camera specific bayonet adapter (camera ring) for Canon EOS DSLR with M48x0.75 mm internal thread for astrophotography. By using the large thread M48x0.75 mm, the vignetting of e.g. a DSLR full format sensor is effectively avoided. Compared to the small T2 thread M42x0.75, this adapter has a free inner diameter of 47.5 mm. This camera ring is made of matt black anodised aluminium and weighs only 40 grams. The light path (overall length) is 10.0 mm. FEATURES Camera-specific bayonet adapter Canon EOS Large female thread M48x0.75 mm Free inner diameter of 47,5mm No vignetting for full format sensors Light path (overall length) is 10.0 mm Made of matt black anodized aluminium Weight only 40 grams SCOPE OF DELIVERY Camera ring for Canon EOS (1 piece)

The BRESSER Erecting Lens creates an upright and right reading image. Furthermore, it increases the magnification by the factor 1.5. The erecting lens serves as a helpful accessory for nature observation or for astronomy beginners and is used for refractors (lens telescopes). Not recommeded to use with reflectors (newtonian telescopes). FEATURESEyepiece connection diameter: 31.7mm (1.25")Magnification: 1.5xSCOPE OF DELIVERYErecting Lens 1.5x (1.25")

Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope. Correction for up to full-frame camera sensors (24x36mm) The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm. How to use the Zero X field flattener with M48 thread connection This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.Filter thread on telescope side availableThe telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.FEATURESField flattener for Explore Scientific ED80, ED102 and ED127 APO telescopesRemoves field curvature from telescopesProduces round stars even at the edge of the image fieldImage sharpness at the edge is drastically increasedA clear benefit for the whole image aestheticsCorrection of field curvature for up to full-frame camera sensors (24x36 mm)Image field flattener without reduction factorOn the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter threadCamera side with large M48 threaded connectorWorking distance of 55 mm between field flattener and camera sensorFor telescopes with a focal length of approx. 480 to 952 mmOptimised for telescopes with focal ratios from F=6.0 to F=7.5Can also be used for various other APOsFully multi-coating on all lens surfacesHousing made of lightweight aluminium, black anodisedAluminium dust cap for M48 threadSCOPE OF DELIVERYZero X field flattener (1 piece)Dust caps

The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this. Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted. SPECIFICATIONS Reduces the focal length by 0.7x at f/8 Flattens the field for astrophotography Developed for ED127 und ED152 APO telescopes Also fits Explore Scientific ED102 and ED165 telescopes - and others Free aperture: 65mm Inner thread for telescope adaption: M76x0.75mm Outer thread for camera adaption: M72x0.75mm 3" focuser barrel adaptor included Adaptor for Explore Scientific focuser M54x0.75mm included T2 camera adaptor M42x0.75mm included Diameter: 78.5mm; length: 100mm Length without adaptors: 52mm Weight without adaptors: 530g What's Included Reducer/Flattener 3" focuser barrel adaptor Adaptor for Focuser M54x0.75mm T2 camera adaptor M42x0.75mm Dust caps

With teleextenders it is possible to extend the effective focal length of a telescope system, resulting in higher magnification for the observation of the moon, the planets or small Deep-Sky objects with the same eyepieces. So you can use the advantages of eyepieces with longer focal length - such as the bigger eye distance and the more relaxed observing comfort - at high magnifications also.These teleextenders incorporate a telecentric optical design that deliveres a excellent image sharpness over the whole field of view and are premium choices for visual observations and astrophotography. The combination of excellent fully multicoating with superior optical design makes the Focal Extenders superior to classic Barlow lenses.Features: Suitable for visual observations and astrophotographytripling the effective total focal length of the telescopeFour lens telecentric design Fully multicoatedFilter thread for color or nebula filters

With teleextenders it is possible to extend the effective focal length of a telescope system, resulting in higher magnification for the observation of the moon, the planets or small Deep-Sky objects with the same eyepieces. So you can use the advantages of eyepieces with longer focal length - such as the bigger eye distance and the more relaxed observing comfort - at high magnifications also.These teleextenders incorporate a telecentric optical design that deliveres a excellent image sharpness over the whole field of view and are premium choices for visual observations and astrophotography. The combination of excellent fully multicoating with superior optical design makes the Focal Extenders superior to classic Barlow lenses.FEATURESSuitable for visual observations and astrophotographyTriples the effective total focal length of the telescopeFour lens telecentric designFully multicoatedFilter thread for color or nebula filtersSCOPE OF DELIVERY Fokal Extender 3 x Adapter 2" (50,8mm) auf 1,25" (31,7mm)

The image plane of many telescopes is not plane, but curved. This results in a picture that has its optimal focus only in the center of the field of view - the edge of the field is out of focus and thus unsharp. The human eye is able to accomodate most of this but a camera will show stars that get increasingly unsharp towards the edge of the field. The Explore Scientific Multi Purpose Curvature Corrector eliminates field curvature in a variety of telescopes - Explore Scientific Apos and many other refractors and cassegrain telescopes. This increases the edge sharpness in the image drastically. Improves edge sharpness not only with Explore Scientific Apos, but also with many other refractor and cassegrain telescopes. This image field leveller fits all Canon EOS cameras, but can also be used for other camera types due to the universal T2 thread connection. This requires an optional camera-specific T2 ring. SPECIFICATIONSImage flattener for Canon EOS cameras Eliminates the field curvature of ED APO telescopes Can also be used for various cassegrains The image sharpness at the edge is drastically increased 2 inch/50.8mm push-in connector with filter thread T2 threaded connection (M42x0,75mm) Full multi-coating on all lens surfaces Stainless steel housingAdapter for Canon EOS bayonet included DELIVERY SCOPE Bildfeldebner Canon EOS (1 piece)