EXPLORE SCIENTIFIC Teleextender 2x 50,8mm/2"

Red polar viewfinder illumination unit for BRESSER EXOS-2 mounts with fixing thread M8x0.75mm. An adjustable illumination makes it easier to find the marked sky objects on the polar viewfinder.IMPORTANT NOTEPlease verify the type of fixing thread prior to your purchase. We offer two different sizes: 12mm (part No. 4964211 for older EXOS-2 mounts) and 8mm (part No. 4964212 for newer EXOS-2 mounts)FEARTURESRetrofittable red pole finder illumination for BRESSER EXOS-2Illuminates the graticule in the viewfinderMakes it easier to find the celestial objectsAlso for 4900850 BRESSER 8x50 viewfinder as spare partAlso for Explore Scientific 8x50 viewfinders as spare partSCOPE OF DELIVERYPolar Viewfinder Illumination unit for EXOS-2Fixing thread M8x0.75mm

"BRESSER Viewfinder Holder 8x50 for Messier Telescopes Category: Spare Part suitable for Messier Telescope Series Description: The sturdy Viewfinder Holder 8x50 for Messier Telescopes, made of metal, provides secure attachment of the viewfinder to the telescope. Easy mounting and adjustment make it an indispensable accessory. Compatible with the BRESSER Messier Telescope series (not suitable for AR90/500 & AR 90/900)."

The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope

Are you having trouble focusing your eyepiece or camera? Then use this BRESSER 25 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube.SPECIFICATIONSIncreases the distance to the eyepiece/camera Suitable for 2.5 inch HEXAFOC Optical length: 25 mm Internal and external thread: M68x0,75 mmInside black matt coated Material: aluminium, black anodized SCOPE OF DELIVERYExtension sleeve 25 mm (1 piece)

One of the most important obstacles for the exploration of the night sky is the brightening of the night sky by artificial lights, such as streetlights. The night sky is not really dark in the vicinity of towns or cities, which reduces the visibility of objects beyond the solar system enormously. Depending on the type of the celestial object, it is possible to dramatically increase the contrast by blocking annoying artificial light. The EXPLORE SCIENTIFIC UHC filter "zeros in" on the wavelengths of so-called emission nebulae. Those objects glow in special colours - their emission lines. Those emission lines are linked to chemical elements - in this case hydrogen at 486nm and 656nm, plus oxygen at 496nm and 501nm. The EXPLORE SCIENTIFIC UHC nebula filter blocks all other colour wavelengths (and thereby nearly all of artificial light) and only the emission line of the hydrogen and oxygen can pass the filter. The result is astonishing: suddenly nebulae are visible at locations that were completely invisible from, without filters. In suburban skies, for example the Owl-nebula M97, the Veil-nebula NGC 6992 or even the bright Dumbell-nebula M27 are not clearly visible. Using this filter allows you to see nebulae and their structures in much finer detail. A must for every visual observer. The Explore Scientific nebula filters come with a individual test certificate - your guarantee to receive a premium filter.

The TELRAD dew cap prevents the projection screen from fogging up in unfavourable weather conditions. With built-in 90° deflecting mirror for easier use in zenith position. The functionality is quite simple. If the TELRAD viewfinder is not used in the meantime, simply flip the dew cap over the viewfinder projection screen. This saves the annoying wiping off of the humidity and the viewfinder is always ready for use. The dew cap is made of impact-resistant plastic and additionally protects the viewfinder projection screen from scratches during transport. The retrofitting of the dew cap is very easy and is done by the two screws on the side.FEATURESdew cap for TELRAD projection viewfinderprojection screen cover when not in useprevents fogging of the projection screenbuilt-in 90° deflecting mirror made of impact-resistant plasticprotects the viewfinder from damageeasy installation on TELRAD viewfinderSCOPE OF DELIVERYdew cap, 1 piece 

L-eXtreme Filter for deep sky nebula photography from the city The relentless spread or urbanization and its associated light pollution have become a growing problem for all amateur astro photographers. The current solutions to the problem can be expensive and might include the purchase of a monochrome camera, several types of narrowband filters and a filter wheel. Especially with inexpensive but fast newtonian telescopes, double-lens ED refractors or even achromats, the L-eXtreme filters open up completely new possibilities for high-class astronomical images even from the light polluted city. CMOS cameras can deliver images like monochrome cameras. This new generation of filters makes it possible to take amazing astrophotos directly from the heavily light-polluted city with all its artificial light sources. The dual narrow bandpass for the wavelengths of O-III and H-Alpha and the almost complete attenuation of the interfering light sources of these new filters make this an ideal solution. L-eXtreme Description L-eXtreme is a two 7nm narrow bandpass filter which can be used with one-shot color cameras like DSLRs (digital SLR), color CMOS and monochrome CCD cameras. The convenience and cost-effectiveness of this filter allows amateurs to photograph rich emission nebulas, even in bright, heavily light-polluted skies. The L-eXtreme filter is the better choice for fast optical systems at a competitive price. It isolates the H-Alpha and Oxygen III nebula emission lines so that the contrast and signal-to-noise ratio between nebulae are maximized. The design of our L-eNhance filter is a technical innovation among filters. For people who live in heavily light polluted areas or when the moon is out, the L-eXtreme is a very good choice. Main Use and Performance This new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources. The narrow bandpass for the wavelengths of O-III and H-Alpha and the almost complete attenuation of the interfering light sources do not require very large or extremely expensive telescopes. No, especially with inexpensive but fast newtonian telescopes, double-lens ED refractors or even achromats, these filters open up completely new possibilities for high-class astronomical images. Furthermore, with these filters CMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras. WARNING: These nebula filters are not designed for sun observation. DO NOT LOOK AT THE SUN WITH THIS FILTER. You will go BLIND if you ignore this warning. Coating technology L-eXtreme has a multiple anti-reflective coating on the optical substrate. The L-eXtreme filter uses a precision coating based on ion deposition coating technology. This ensures durability and scratch resistance as well as stability on the CWL (central wavelength), which is not affected by temperature changes. Absolute precision and homogeneity of the coatings as well as maximum values for transmission in the passband and optical density in the off-band range are guaranteed for all filters.  FEATURESProfessional photographic filter for astronomyImproves deep sky emission nebula photography Best choice for extreme light pollution suppression For taking pictures also from highly light-polluted areas Dual-narrow-band filter with high transmission for O-III and H-Alpha linesDoes not require very large or extremely expensive telescopesExcellent results also with fast inexpensive newtonian telescopes, double-lens ED refractors or even achromatsL-eXtreme filter is the better choice for fast systems at a competitive priceCMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras Filter diameter: 2.0 inches / 50.8 mmConnecting thread: M48x0.75mmSelected optical glass material Spectrum: 300-1000nm Off-Band Blocking: > 99 % Surface Quality: 60/40 (Refer to MIL-O-13830) Fine-optically polished to ensure accurate 1/4 wavefront and highest parallelism over the both surfacesHigh transmission at major nebula emission lines (i.e. H-alpha 656nm and OIII 496nm&500nm)SCOPE OF DELIVERY L-eXtreme filter (1 pc) Dust protection box (1 pc)

The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this. Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted. SPECIFICATIONS Reduces the focal length by 0.7x at f/8 Flattens the field for astrophotography Developed for ED127 und ED152 APO telescopes Also fits Explore Scientific ED102 and ED165 telescopes - and others Free aperture: 65mm Inner thread for telescope adaption: M76x0.75mm Outer thread for camera adaption: M72x0.75mm 3" focuser barrel adaptor included Adaptor for Explore Scientific focuser M54x0.75mm included T2 camera adaptor M42x0.75mm included Diameter: 78.5mm; length: 100mm Length without adaptors: 52mm Weight without adaptors: 530g What's Included Reducer/Flattener 3" focuser barrel adaptor Adaptor for Focuser M54x0.75mm T2 camera adaptor M42x0.75mm Dust caps

With the introduction of the 68° Series we are pleased to make two important improvements in eyepiece manufacture, the first being 15 layer Enhanced Multi-layer Deposition (EMD™) coatings on all glass-to-air surfaces to gain maximum contrast, and waterproofing the eyepiece with the use of Argon gas purging instead of standard Nitrogen gas. Although Nitrogen is a fine choice that will last for many years, Argon is a larger molecule that maintains its protective properties over a wider range of temperatures, and is even more resistant to diffusion thereby further extending the protective waterproof environment of the eyepiece body. Through computer-optimized design, a careful selection of optical glasses, and enhanced multi-layer deposition coatings, the Explore Scientific 68° Series™ eyepieces produce long eye-relief and ensure high image-correction, a flat field, and high contrast across the entire image field. An excellent choice for those who make extended visual studies of detail with subtle variations of brightness, and for those who must wear glasses while observing. All 68° Series eyepieces are fully EMD (Enhanced Multi-Layer Deposition) coated and edge-blackened to produce superior contrast.