EXPLORE SCIENTIFIC 4K DEEP SKY ASTRO Camera & Guider 8,3 MP II

Please note that this astronomy book for beginners is only available in German.

Set off on your personal journey to the stars with the BRESSER Sirius 70/900 AZ lens telescope. The complete astronomy set already includes everything you need to start observing the sky: the astronomical lens telescope with 70 mm aperture and 900 mm focal length, the azimuthal mount, the tripod and a wide range of accessories for fascinating discoveries. At the same time, it is very easy to operate - ideal to amaze even children with a view of the night sky. Simply a stargazing classic - the telescope With this lens telescope - a so-called Fraunhofer achromatic refractor - even total astro-beginners and children can easily explore the secrets of our night sky. Because this classic design impresses with its special user-friendliness and easy handling. To ensure that you enjoy good imaging properties when looking at the Moon, Sun, planets and star clusters, the entry-level telescope has been equipped with modern, precisely coated optics. The 70 mm aperture collects a total of 100 times more light than the human eye. And it is also convincing compared to a comparable 60 mm telescope: the light gathering capacity is 36 % higher and the resolving power is also better. Thus, with the 70 mm lens telescope, significantly more details are visible at the same magnification, e.g. on Saturn's rings or the two main cloud bands of Jupiter. But how big do the celestial objects appear then? The resolution of the 70 mm lens lets you enjoy really sharp images at magnifications up to about 140x. For comparison: with a 60 mm aperture, this is only possible up to 120x. Technically, of course, the starter telescope can do even more - theoretically up to 675x with the included accessories. However, with increasing magnification, the image can slowly become more and more blurred. And how big you can really see the planets, star clusters and co. depends not only on the telescope. Another important factor: the air turbulence in the atmosphere (seeing conditions). A sharp image with good contrast - this is what the starter telescope achieves with its large focal ratio of about 1 to 12.9 (F/12.9), which is calculated from the ratio of the 70 mm aperture to the 900 mm focal length. And you will see: Due to the long focal length, especially the Sun, Moon, planets, open star clusters and globular clusters become absolute eye-catchers. Solid base for your stargazing hours - mount and tripod Found the ideal location for your nocturnal explorations? Then attach the telescope tube to the height-adjustable aluminium tripod with azimuthal mount. And this azimuthal mount is particularly compelling due to one quality: operation is really child's play. Simply swing the telescope by hand to the left or right, up or down, as with a common photo tripod. This way you can quickly move your gaze from one celestial highlight to the next. And where are the accessories? Simply place them on the storage plate between the tripod legs. This way, eyepieces, solar filter and co. stay always within reach. All the trimmings - the accessories The beginner’s telescope comes with everything you need for a quick start in stargazing. When searching for celestial bodies worth seeing, take your first look through the included LED viewfinder. Because the direction finder helps you to align the telescope precisely and find astronomical objects. It works like this: The LED finder is mounted in parallel on the telescope tube. It projects a red dot onto a small ground-glass screen that appears to float in front of the sky when you look through it. And that is exactly where the aperture of your telescope points. This way, you can always keep an overview of the night sky - before focusing your attention on the details through the magnification of the telescope. And you decide how high this magnification is by choosing the eyepiece. You will be amazed: the two eyepieces included in the set (4 mm, 20 mm) allow you to admire completely different images of the same object. If you one day want a change of perspective, you can expand your astronomy set with a large selection of eyepieces. For this purpose, the socket diameter is 1.25 inches (31.7 mm), which corresponds to an international, manufacturer-independent standard. You like what you see, but would love more detail? Then simply insert the 3x Barlow lens between the telescope and the eyepiece. And you have tripled the magnification of the eyepiece! Observation comfort and a pleasant view - this is what the 90-degree star diagonal mirror is made for. Even if your starter telescope is pointed vertically into the sky, you don't need to lie down underneath it to see anything. Instead, simply look in comfortably from the side and enjoy the view. But it's not only at night that we should look skywards. For only during the day you can see a very special star: our Sun. So put the solar filter in front of the lens and safely look at sunspots and granulation on the Sun. CAUTION: Never point the telescope at the Sun without the solar filter! Would you like to share your discoveries with friends and family? Then take your first steps in astrophotography right away - and those are done in no time with the smartphone camera adapter for your beginner's telescope. The Moon, Sun, planets, open star clusters and globular clusters always make a good picture. Discover what our night sky has to offer with the BRESSER Sirius 70/900 AZ refracting telescope. FEATURES Beginner’s telescope for astronomy 70 mm aperture; 900 mm focal length Achromatic refractor type Fraunhofer Ideal for observing the Sun, Moon, planets and star clusters Height-adjustable tripod with azimuthal mount Easy to use, also very suitable for children Focal ratio F/12.9, therefore very sharp image and high contrast Two eyepieces and one Barlow lens with 31.7 mm (1.25 inch) sockets for different magnifications Safe solar observation with the included solar filter Entry into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Starter lens telescope Aluminium tripod Azimuthal mount Eyepieces: 4 mm and 20 mm (1.25 inch socket) Barlow lens 3x (1.25 inch socket) Star diagonal mirror LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software via download Instruction manual

BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

Filter Set 2 is recommended for Moon & Planets from 100mm (4") Aperture Set 2 includes the following filters: Explore Scientific Filter 1.25" Green No.56 - 0310262 The green filter is to increase the contrasts enormously between the red and the blue regions of the cloud structures on the gas planets Jupiter and Saturn. Seeing our Earth Moon through the green filter, the contrasts of each ray crater become clearly more visible. Explore Scientific Filter 1.25" Orange No.21 - 0310273 This one really supports the detection of the dark areas on the planet Mars. The details of the clouds of Saturn and Jupiter are also so much more visible through the Filter. Explore Scientific Filter 1.25" Yellow No.12 - 0310267 Watching the Moon surface through the filter, the contrasts will enormously increase. Same with planet Mars. On the huge planet Jupiter, when using the filter, you can even see the contrasts between the cloud-bands and a lot more details. Starting with a telescope diameter of 8“ and a clear sight, you even get to see various details of Saturn. Explore Scientific Filter 1.25" Blue No.80A - 0310264 The color of light blue really supports watching the high clouds on Mars. The contrast increases. The dark red structures will be shown even darker, so this is the perfect filter for watching the big red Flecks on the gas planet Jupiter. The rings of Saturn will be accentuated, the structures of the Venus Atmosphere will be even finer. What ist a color Filter for and do we really need it? Color Filters darken the light slightly, that reaches the eye or the sensor of the camera. This eliminates for instance stronger transitions. The result is that your picture turns out with more contrast which automatically shows more details. FEATURES Made from high-quality optical glass Filter glass is absolutely parallel All optical surfaces have anti reflex coatings Filter housing from black anodized aluminum Filter threads on both ends (female/male) Multiple filters usage is possible SCOPE OF DELIVERY 4pcs color filter protection-case

Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sunvery resistant to damage100% safeSCOPE OF DELIVERYSolar eclipse glasses (5 pieces)

BRESSER 40mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 40 mm Field of view: 46° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

High resolution deep sky camera with large Panasonic CMOS sensor and active cooling. Enter the world of astrophotography now. With the new EXPLORE SCIENTIFIC DEEP SKY ASTRO camera you get a modern complete package for the comfortable shooting of astro photos and videos. Finally, an easy-to-use camera for capturing galaxies, star clusters, the moon and even planets with high resolution and low sensor noise. Thanks to the fast USB 3.0 computer interface, all image data is transferred within a few seconds. Long waiting times are now history. Simply connect the camera to your telescope using the T2 female thread (M42.0.75mm) or the supplied 2" (50.8mm) plug-in adapter and after installing the drivers and the included EXPLORE Capture recording and editing software, you are ready to take the first real astro photos with a highly specialized camera for your application.  The EXPLORE Capture Pro software included in delivery not only offers the basic functions required for image and video capture, but also many helpful special functions for image post-processing and camera setup. Functions such as live image display, exposure settings, white balance, dark image print, stacking, timelapse recording and much more can be configured individually. Especially the very sophisticated software makes your entry into astrophotography really easy. With the automatic settings you can produce absolutely presentable results without any previous knowledge. If you like, simply switch off the automatic settings and gradually dare to adjust the individual professional settings. The new EXPLORE SCIENTIFIC DEEP SKY camera has a highly sensitive and very low-noise Panasonic CMOS sensor which is additionally cooled down to 40°C below ambient temperature by the two-stage thermoelectric cooling. In contrast to normal DSLR cameras, this guarantees much lower noise and fewer hot pixels in your shots. The images are not only much sharper and more brilliant, but also contain more usable image information. Through the controlled setting of the desired camera temperature, the creation of dark frames under reproducible shooting conditions is possible at any time. The large-format CMOS sensor with 21.9mm diagonal also allows large image fields and simplifies the adjustment and centering of objects considerably. The camera has a built-in USB hub with 2 x USB2.0 ports at the rear. Connect your additional autoguider camera or motor focus etc. via a short USB cable and reduce the risk of cable spaghetti and cable breaks. Separate cable connections between your accessories and your computer are no longer necessary. A sturdy hard case for the camera plus accessories is also included. IMPORTANT NOTES: Don't get confused by the megapixel data and the contrary price structure. In the field of astronomy, the key criterion is not the sensor resolution but the maximum light sensitivity. The main goal is to capture as much light as possible in a short time.DOWNLOAD latest camera software and drivers see download folder "Manuals" or here: http://www.touptek.com/download/showdownload.php?lang=en&id=2 Sample photos made by Lóránd Fényes in Hungary: https://fenyeslorand.hu/asztrofotok/Field of view for different focal lengths in arc minutes and degrees: 400 mm - 151´x 114´ (2.5 x 1.9 degrees) 500 mm - 121´x 91´ (2.0 x 1.5 degrees) 600 mm - 101´x 76´ (1.7 x 1.3 degrees) 700 mm - 86´x 65´ (1.4 x 1.1 degrees) 800 mm - 76´x 57´ (1.3 x 0.9 degrees) 900 mm - 67´x 51´ (1.1 x 1.9 degrees) 1000 mm - 61´x 46´ (1.0 x 0.8 degrees) 1250 mm - 48´x 37´ (0.8 x 0.6 degrees) 1500 mm - 40´x 30´ (0.7 x 0.5 degrees) 1750 mm - 35´x 26´ (0.6 x 0.4 degrees) 2000 mm - 30´x 23´ (0.5 x 0.4 degrees) FEATUREScamera type: ASTRO Camera 16.0MP ATR3CMOS16000KPA data output: single pictures and video image Sensor: Panasonic NM34230PLI CMOS Color Sensor adjustable resolution: 4648x3506 / 2304x1750 / 1536x1168 adjustable binning: 1x1 / 2x2 / 3x3 frame rate per second (FBS): 22.5 / 43 / 48 physical sensor size in pixels: 4648 x 3506 megapixel: 16 MP sensor size: 17.6 x 13.3 mm (4/3 inch) pixel size: 3.8 µm x 3.8 µm bit depth: 12 Bit backfocus: 17,5 mm  shutter Type: rolling shutterinternal camera memory: DDR 3 RAMthermoelectric cooling with fan: yes, up to 40°C below ambient temperature adjustable exposure times: 150µs to 60min operating temperature: -10 to +50°C (30-80% RLH) cable length USB 3.0: 150cm DC cable length power supply: 200cm CNC machined aluminium housing camera diameter: 80mm; length: 102mm camera weight: 0,53 kg camera connection diameter: 2.0 inch ( 50.8mm) camera connection thread: T2 (M42x0,75mm) filter thread: Yes, 2.0 inch in receptacle camera connection to PC: USB 3.0 built-in USB hub with 2 x USB 2.0 ports power supply: Power supply 12 Volt 3,0 Ampere included software: EXPLORE Capture included camera driver and ASCOM driver includedoperating system: WINDOWS 10 + 11 PC requirements: CPU Intel Core2 2.8Ghz or higher / 2 GB Ram / USB 3.0 SCOPE OF DELIVERYDEEP SKY ASTRO Camera 16.0MP telescope adapter T2 thread to 2.0" (50,8mm) USB 3.0 connection cable 150cm power supply 230V/12V3,0A dust cap software CD hard case instruction manual

High resolution deep sky camera with large SONY EXMOR IMX-571 APS-C CMOS sensor and active cooling. This camera's extreme sensitivity is achieved through SONYs backside illumination technology. This camera should appeal to both advanced users and those looking to move up from DSLRs for more serious deep sky imaging.Enter the world of astrophotography now. With the new EXPLORE SCIENTIFIC Deep Sky Astro camera you get a modern complete package for straightforward shooting of astro photos and videos. Finally, an easy-to-use camera for capturing galaxies, star clusters, the moon and even planets with high resolution and low sensor noise. Thanks to the fast USB 3.0 computer interface, all image data is transferred within a few seconds. Long waiting times for images are now history. Simply connect the camera to your telescope using the T2 female thread (M42, 0.75 mm) or the supplied 2" (50.8 mm) plug-in adapter and after installing the drivers and the included EXPLORE Capture recording and editing software, you are ready to take the first real astro photos with a highly specialized camera for your application.  The EXPLORE Capture Pro software included in this package not only offers the basic functions required for image and video capture, but also many helpful special functions for image post-processing and camera setup. Functions such as live image display, exposure settings, white balance, dark image subtraction, stacking, timelapse recording and much more can be configured individually. This very sophisticated software makes your entry into astrophotography really easy. With the automatic settings you can produce absolutely presentable results without any previous knowledge. As soon as you feel confident, simply switch off the automatic settings and gradually explore the software's more individual professional settings. The new EXPLORE SCIENTIFIC Deep Sky camera has a highly sensitive and very low-noise SONY EXMOR IMX-571 APS-C CMOS Sensor, which can be cooled down to 40 °C below ambient temperature by the two-stage thermoelectric cooling. In contrast to normal DSLR cameras, this guarantees much lower noise and fewer hot pixels in your shots. The images are not only much sharper and more brilliant, but also contain more usable image information. Through the carefully automatically-controlled setting of the desired camera temperature, the it's easy to create of dark frames which can be re-used under similar shooting conditions - speeding up your processing considerably. The large-format CMOS sensor with 28.3 mm diagonal also allows large image fields and simplifies the adjustment and centering of objects considerably. The secret to the high light sensitivity of this camera is SONY's new back illuminated EXMOR CMOS sensor. It increases the quantum efficiency to up to 80 % at 533 nm, which leads to an extremely high sensitivity and subsequently particularly bright and high-contrast photos.The camera has a built-in USB hub with 2 x USB 2.0 ports at the rear. Connect your additional autoguider camera or motor focus etc. via a short USB cable and reduce the risk of cable tangles and cable breaks. Separate cable connections between your accessories and your computer are no longer necessary. A sturdy hard case for the camera plus accessories is also included. IMPORTANT NOTES: Don't get confused by the megapixel data and the contrary price structure. In the field of astronomy, the key criterion is not the sensor resolution but the maximum light sensitivity. The main goal is to capture as much light as possible in a short time.DOWNLOAD latest camera software and drivers see download folder "Manuals" or here: http://www.touptek.com/download/showdownload.php?lang=en&id=2 Sample photos made by Lóránd Fényes in Hungary: https://fenyeslorand.hu/m31/https://fenyeslorand.hu/ic349_merope_nebula/https://fenyeslorand.hu/asztrofotok/Field of view for different focal lengths in arc minutes and degrees: 400 mm - 201´ x 135´  (3.4 x 2.3 degrees)500 mm - 161´ x 108´  (2.7 x 1.8 degrees)600 mm - 134´ x 90´  (2.2 x 1.5 degrees)700 mm - 115´ x 77´  (1.9 x 1.3 degrees)800 mm - 100´ x 67´  (1.7 x 1.1 degrees)900 mm -  89´ x 60´  (1.5 x 1.0 degrees)1000 mm - 80´ x 54´  (1.3 x 0.9 degrees)1250 mm - 64´ x 43´  (1.1 x 0.7 degrees)1500 mm - 53´ x 36´  (0.9 x 0.6 degrees)1750 mm - 46´ x 31´  (0.8 x 0.5 degrees)2000 mm - 40´ x 27´  (0.7 x 0.45 degrees)FEATURESCamera type: ASTRO Colour Camera 26.0MP ATR3CMOS16000KPA Data output: single pictures and video Image Sensor: SONY EXMOR IMX-571 CMOS Colour Sensor Adjustable resolution: 6224x4168 / 3104x2084 / 2064x1386 Adjustable binning: 1x1 / 2x2 / 3x3 Frame rate per second (FBS): 6.8 / 28 / 63 Physical sensor size in pixels: 6224 x 4168diaginal: 28.3 mmMegapixel: 26 MP Sensor size: 23.48 x 15.67 mm (APS-C format)Pixel size: 3.76 µm x 3.76 µm Bit depth: 8 Bit / 16 BitBackfocus: 17.5 mm  Shutter Type: rolling shutterInternal camera memory: 512MB DDR 3 RAMThermoelectric cooling with fan: yes, up to 40°C below ambient temperature Adjustable exposure times: 150µs to 60min Operating temperature: -10 to +50°C (30-80% RLH) Cable length USB 3.0: 150cm DC cable length power supply: 200cm CNC machined aluminium housing Camera diameter: 80mm; length: 102mm Camera weight: 0.53 kg Camera connection diameter: 2.0 inch ( 50.8mm) Camera connection thread: T2 (M42x0,75mm) Filter thread: Yes, 2.0 inch in receptacle Camera connection to PC: USB 3.0 Built-in USB hub with 2 x USB 2.0 ports Power supply: Power supply 12 Volt 3,0 Ampere included Software: EXPLORE Capture included Camera driver and ASCOM driver includedOperating system: WINDOWS 10 + 11 PC requirements: CPU Intel Core2 2.8Ghz or higher / 2 GB Ram / USB 3.0 WHAT'S INCLUDEDDeep Sky Astro Camera 26.0MP Telescope adapter T2 thread to 2.0" (50,8mm) USB 3.0 connection cable 150cm Power supply 230V/12V 3.0A Dust cap Software CD Hard case Instruction manual

Enter the world of astrophotography now. With the new BRESSER HD moon and planet camera with ST4 autoguider function. This camera is very good for astrophotography with short exposure times, i.e. for celestial objects like the moon, planets or star clusters. For astrophotography with long exposure times for low light deep sky objects, like galaxies and gas nebulae, we recommend the BRESSER Full HD Deep-Sky Camera (Art. No. 4959050) instead, with it's even higher resolution and sensor sensitivity. Equipped with the new high-sensitivity SONY IMX225 CMOS colour sensor, the BRESSER HD moon and planet camera delivers amazing image results with very short exposure times, even with simple telescope equipment. In addition, this ultra-modern camera can also be used as an autoguider, e.g. to actively track the main imaging device with SLR or CCD astro camera. A universal CMOS colour camera that delivers super-sharp lunar and planetary images in particular. The particularly low noise level of this new chip generation from SONY, ensures an exceptionally high brilliance and no cooling is required. Due to the high native pixel resolution of 1280x980, together with suitable telescopes, very beautiful images of the moon, but also detailed planetary images are possible. The ToupSky pro software included in the scope of delivery not only offers the necessary basic functions for image and video recording, but also many helpful special functions for image post-processing and for setting up the Guider. Functions such as live image display, exposure settings, white balance, dark image capture, stacking, timelapse recordings and much more can be individually configured. Especially the very sophisticated software makes it really easy for you to get started in astrophotography. With the automatic settings, you can produce absolutely presentable results without much prior knowledge. If you wish, simply switch off the automatic settings and gradually venture into the individual professional settings. Connect the camera directly to the ST4 connector of your telescope mount and you have fully automatic tracking control. This makes long exposures of several minutes possible without the stars producing unwanted line marks due to the ever-present synchronisation fluctuations of a telescope mount. A corresponding ST-4 connection cable is even included with the camera. Due to the high light sensitivity of the camera, you will always find a suitable guide star even with very short exposure times. For connection to guide tubes or off-axis guiders, the camera has a 1.25" plug-in sleeve, 1.25" filter thread (M28.5x0.6) and C-mount thread (1 "x1/32"). IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10 / 11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2 SPECIFICATIONS Camera type: BRESSER / Touptek GPCMOS01200KPF color Sensor: SONY IMX225 CMOS colour Image and video size: Full HD 1280 x 960 pixels (video 30-54,4 FPS) Native sensor size in pixels: 1280 x 960 Exposure times: 102ms to 16min Binning: YES, 1x1 and 2x2 Megapixel: 1.2 MP Sensor size in mm: 4.8 x 3.6 Pixel size: 3.75 µm x 3.75 µm Bit depth: 8/12 switchable ST-4 Compatible Autoguider: YES CNC milled housing made of aluminum Protective strap on the camera housing Camera tube diameter: 1.25 inch (31.7 mm) Camera connection thread: C-mount + 1.25 "filter thread Computer interface: USB 2.0 C-mount extension tube with 1.25 inch filter thread included No IR cut filter installed Operating system: WINDOWS 10 + 11 ASCOM and WDM driver included Field of view for different focal lengths in mm (given in arc minutes): 400 mm - 41,2'x 30,9' 500 mm - 33'x 24,7' 600 mm - 27,5'x 20,6' 700 mm - 23,5'x 17,7' 800 mm - 20,6'x 15,4' 900 mm - 18,3'x 13,7' 1000 mm - 16,5'x 12,4' 1250 mm - 13,2'x 9,9' 1500 mm - 11'x 8,2' 1750 mm - 9,4'x 7,1' 2000 mm - 8,2'x 6,2' SCOPE OF DELIEVRY HD camera C-mount adapter USB 2.0 PC connection cable with a length of 180cm Interface cable for ST-4 autoguider port with 150cm length Dust cap for camera tube Software CD

Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light. FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, bmp, tif, pngvideo format avi SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0 SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)

Astrophotographers generally use two different focal lengths: Short focal lengths for overview photos and extensive deep-sky objects, and long focal lengths for objects which are further away. Our aspherical mirror optics offer the perfect solution for these scenarios. The VISAC primary mirror (Vixen Sixth-Order Aspheric Cassegrain) is specially designed for astrophotography and provides a fully flat and true-colour image over the entire image frame. Thanks to the three-element field corrector in front of the convex secondary mirror, there is no spherical aberration, coma or field curvature. Although the device is designed for astrophotography, it is also suitable for visual observations. FEATURES Photographically optimized thanks to field flattener lens Revolutionary coating technology High light-gathering power Photographically optimised optical system Built-in field flattener lens 200 mm aperture and 1800 mm focal length Optional reducer availableBackfocus without Reducer: 142,9 mmBackfocus with Reducer: 63,5 mmWeight: 6.9 kg DELIVERY CONTENT VC200 reflector telescope Carry handle 7x50 finder scope (illuminated) Flip mirror Dovetail adapter

NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation. The BRESSER Messier NT-203 with a parabolic main mirror provides you with images that a few years ago were impossible in this price class. Modern production technology lets you track the shadows of Jupiter's moons on the planet; the amount of structure and details on the surface of the planet is breathtaking. But the Messier NT-203 is not only great for planetary work: Detect details in faint distant galaxies and let the glow of nebulae takes you to a journey into the depth of the Milky Way. The Messier NT-203 provides you with images from the remains of giant exploded stars and gives you a view into the nursery of new stars. Let this big scope take you away to the beauty of the universe! Please note: Reflector telescopes with optical design Newton are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore, we suggest BRESSER refractor (lens) telescopes for landscape and nature observing. CHARACTERISTICS OPTICS Optical design: reflector telescope Mirror diameter: 203 mm / focal length: 1000 mm / F/5 Maximum recommended magnification: 406x Telescope for night and solar observation Very high quality Hexafoc focuser with 2.5'' free inner diameter Diffraction limited optics with parabolic main mirror 8x50 straight through viewfinder with reticle Optimized finder socket for comfortable use Cradle rings with handle and integrated piggyback camera holder (1/4 thread) Smartphone adapter for celestial navigation included Dovetail plate with stainless steel rail 50.8 mm (2) to 31.7 mm (1,25) adapter with integrated T2 thread (T2-adapter ring for your camera is needed) CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod (Min. 69 cm / Max. 109.5 cm) Load capacity up to 13 kg payload Retrofittable with the Bresser Star Tracker Goto Kit (item no. 4951750) Circular bubble for easy horizontal alignment Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination (item no. 4964212) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight incl. counterweight: 19.3 kg Batteries: not included SCOPE OF DELIVERY Optical tube 26 mm Super Plössl eyepiece (31.7 mm / 1.25'') Integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2'') eyepieces 8x50 optical viewfinder Rotatable star map Aperture solar filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Adjustable polar finder scope with optional illumination Astronomy PC software Stellarium (via download) BRESSER EXOS-2 mount Stainless steel tube field tripod with accessory tray 2 x 4.5 kg counterweight

The Vixen POLARIE is a new camera accessory, that enables you to capture sharp, point-like images of the stars. It has been developed to track the stars and to compensate for the movement of the earth. POLARIE enables you to take atmospheric shots of landscapes and the night sky and can also capture these in sharp images. Extremely simple and compact design for use in every location on earth. If you have ever viewed a romantic, starry sky, you will surely have felt the desire to capture it on film. But if you have tried to do this, you will know that it’s really not all that easy. This is because you need to have multiple exposures of several minutes if you want to photograph the stars. As our earth is always turning on its axis, the stars keep moving as time passes and become long strokes on photographs. Today’s digital technology gives us the option of obtaining shorter exposure times by increasing the sensitivity of the sensor, but, unfortunately, this dramatically increases picture noise and the picture becomes very noisy and ugly. This makes it impossible to take beautiful images of the night sky. For this reason, the Vixen company has developed the Polarie Star Tracker, which eliminates the problem of star migration. When you attach your camera to the Polarie, the device will track in the opposite direction of earth’s rotation and this allows for sharp, point-like images of the starry sky even when using long exposure times. POLARIE is a new and unique camera accessory for photographing the night sky, with perfectly point-like stars being tracked. Using the simplest solution, it makes the experience of photographing the night sky more accessible for everyone. The multi-functional mode dial is adjustable for sky- and landscape-, moon-, sun- and star-tracking. Polar altimeter for a fast focus. Also included: USB connection for external power supply and a built-in compass for quick orientation. Available as optional extra accessories are a polar finder telescope for exact alignment with the celestial pole for long-exposure photography including into the telephoto range, and a tripod. FEATURES Tracking speed: Sidereal, 0.5x sidereal, sun, moon Fine adjustment: F57, 6mm worm wheel with 144 teeth Polar axis: F 40mm, aluminium alloy Drive: High-precision stepper motor: Bearing capacity: approx. 2kg incl. ball head Orientation aperture: Field of vision 8.9° vInclinometer: 0° to 70° Miscellaneous: Built-in compass (removable) Power supply: 2x AA batteries (compatible with alkaline, Ni-MH, Ni-CD batteries) or external power supply compatible with USB mini-B Drive voltage: AA batteries: DC2,4-3.0V, Max. 0.6A External power supply: DC4,4-5,25V, max. 0.3A Operating time: approx. 2 hours with alkaline batteries Approx. 20 hours with external power supply at 20°C with 2 kg load Operating temperature: 0° to 40° Dimensions: 95mm x 137mm x 58mm Weight: 740g without batteries Optional accessories available: Polar finder telescope, M-155 tripod, QPL compass, ball head WHAT’S INCLUDED 1x camera mount