BRESSER Weather Station 5-in-1 Beaufort

Has your 5-in-1 external sensor for your BRESSER WiFi colour weather centre succumbed to the impact of your child’s football or your last house move? Then it’s time for a replacement. And you don’t need to buy the whole product! This 5-in-1 external sensor is the perfect replacement part for your weather centre. It takes no time to install: Establish the power supply, take the mounting materials from the packaging and fit the wireless sensor at your preferred spot as normal. The existing base station will connect to the replacement external sensor automatically as normal. And if the two devices can’t find one another? You can manually intervene: Simply press the WiFi/SENSOR button on the base station and it will start to search for the new wireless sensor. Once connected, the local measured values for wind speed, wind direction, humidity, temperature and precipitation will be transmitted via 868 MHz to your colour display. Good prospects again: Get the full functionality from your WiFi colour weather sensor again with the 5-in-1 external sensor.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. For all units with a lower LOT number, you need the sensor with item number 7802510. You can check the LOT number on your unit as well as on the packaging. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100 FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

FEATURES5.7'' colorful display for time and detailed weather informationWIFI connection with internet time synchronizationReceives weather data from 5in1 profi sensor and from wireless thermo-hygro sensor via 868 MHz transmissionPublish local weather station data on weather underground and weather cloudDisplays time, calendar, weekday and moon phaseAlarm clockIce pre-alert functionIndoor temperature (°C/°F) and humidity with comfort indicationOutdoor/Channel’s temperature (°C/°F) and humidity readingsGust or average wind speedWind direction (16-direction indicator)Rain rate (hourly, daily, weekly, monthly, total rainfall)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Barometric pressure in relative or absolute readings (hPa, inHg, mmHg)Smart outdoor “Feels like” sensation readingWeather index for outdoor feels like, dew-point, Wind chill, Heat indexMax/Min memory records and past 24 hours (hourly record)Hi/Lo alert with flash LED indicatorWeather calibration (on set-up UI)3-mode brightness: Hi / Lo / Off7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU)Support firmware update (TBC)Support a wireless 5-in-1 professional weather sensor (Included)Support up to 7 pcs wireless extra sensors (Optional) (item no. 7009999) DELIVERY SCOPEMain unitProfessional 5in1 sensor incl. mounting material100-240V/50 Hz power adapter and cable

The National Geographic wireless weather station Translucidus connects large digits on a futuristic-transparent display with a simple and elegant stand. The operating elements have been placed on the rear side for protection, thanks to the transparent display, these are still clearly legible. In addition to the large radio clock time, the display also shows outside- and inside temperature permanently next to each other. A real eye-catcher for every desk. The Weather station can also be used as alarm clock and is equipped with a sleep function. Features DCF radio clock reception and display Outdoor temperature (in °C) Internal temperature (in °C) Relative humidity (inside ) in % Thermometer outdoor sensor (1 incl. - up to 3 can be connected) Controls on back Transparent display Battery operation via 4x AAA batteries (2x AAA each for station and sensor) 5 year manufacturer's warranty for online registration Scope of delivery Weather station Outdoor sensor Operating Instructions ​

With the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1 you’ll never find yourself left out in the cold by the weather again. The weather station, with 7-in-1 solar outdoor sensor, supplements the on-site data with plenty of practical information from the ProWeatherLive platform. A special highlight: the extensive weather forecast, with the outlook for the next 11 days and a detailed overview of the next 24 hours. Information on local visibility and cloud cover also helps passionate amateur meteorologists to keep a close eye on the weather. You’ll always be up to date, whenever and wherever you are – choose to view your data, incl. max./min. values, conveniently on the clear display of the weather station, in the ProWeatherLive app or in a web browser. Environmentally-friendly and user-friendly – weather station with solar sensor Quick to install and connect to the base station, the 7-in-1 wireless sensor reliably supplies data measured directly on site, including temperature, humidity, wind speed, wind direction, precipitation amount, UV level and light intensity. Meanwhile, the power of the sun ensures smooth operation via the large solar panel. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. A comfortable indoor climate with the WiFi weather station Outdoors, the weather station puts in a great performance with anemometer and rain gauge as well as thermometer and hygrometer, UV and light sensors. What about the climate indoors? A thermo-hygro sensor has been integrated into the base station so that you can always keep an eye on the indoor temperature and humidity. The trend display, which can be called up directly on the display, is perfect for preventing excessively dry air or mould. Trends you will be able to see include development of the room climate, so that you can respond by introducing fresh air or by humidifying if you need to. In addition, with ProWeatherLife, you can receive notifications when the indoor temperature and humidity change, as well as important weather parameters. Optional extensions for your WiFi weather station Want to adapt your weather station to your needs? No problem! It comes with a range of optional extensions through the following additional sensors (not included): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detector and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality For the perfect extensions, browse our BRESSER accessories to see which additional sensors are compatible (not included). Stay up to date on your local weather and indoor climate easily, whenever and wherever, with the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1. BASE STATION FEATURES Graphic weather forecast for the next 11 days (today and next 10 days)/for 24 hours (now and next 23 hours) from the ProWeatherLife server 11-day forecast for maximum and minimum temperature, as well as average temperature and chance of precipitation from the ProWeatherLife server Local visibility and cloud cover via the ProWeatherLive server WiFi connection for publishing local weather data on ProWeatherLive and up to 2 other weather platforms (e.g. AWEKAS) Indoor temperature (°C/°F) and humidity with trend Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Trend graph for air pressure, precipitation, temperature (indoor/outdoor) or humidity (indoor/outdoor) on the display Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Wind gusts and average wind speed, Beaufort scale (wind speed scale) Sunburn time display Air pressure Set weather notifications via the ProWeatherLive server Maximum/minimum value memory Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm clock with frost alarm WSLink app for easy connection to WiFi and weather platform, weather data calibration and for firmware updates 7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU) Supports additional optional sensors Power supply: Mains plug (included), CR2032 back-up battery (not included) FEATURES OF 7-IN-1 OUTDOOR SENSOR Measurement of temperature, humidity, wind speed, wind direction, precipitation quantity, UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included)Range: 150 mSize: 390 x 174 x 465 mm SCOPE OF DELIVERY Base station Solar-powered outdoor sensor Power adapter Instruction manual

The BRESSER MyTime Jumbo LCD weather wall clock is the ideal weather wall clock for the office or other large rooms. With its 9 cm high numbers the time can easily be read even from a greater distance and from almost any position in the room. The setting of the time as well as the change to daylight saving time is done automatically via the DCF time signal (CET). Apart from that with the weather wall clock you can also always keep an eye on the temperature and humidity and you even get a weather forecast for the following 12 to 24 hours.  PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, it also offers manual time setting in case it is used in a different time zone.FEATURESJumbo display 330 x 185mmRadio controlled clock (automatic setting of time and clock change) AlarmInside and outside temperature Humidity12-24 hours weather forecast Includes wall mounting and fold-out standSCOPE OF DELIVERY1x weather wall clock1x outdoor sensor1x manualREQUIRED BATTERIESStation: 4x AASensor: 2x AAA

For all ambitious amateur gardeners and meteorologists who are not satisfied with average values of the weather services, the digital wireless rain gauge from BRESSER offers the possibility of your own professional precipitation measurements. The BRESSER Professional rain gauge shows the detailed rain measurement values in millimetres, but also the indoor and outdoor temperature is displayed precisely. The rain gauge has a radio distance of 150m outdoors. The radio range is achieved by the 868 Megahertz radio signal. The base station can determine temperature and humidity and can also show the rain readings hourly, daily, weekly, monthly or annualy. It is equipped with a graphical histogram. FEATURES Precipitation measurement DCF radio clock reception and display Wake-up call with snooze function (Snooze) Outdoor temperature alarm (frost warning) Outdoor temperature (in °C or °F) Indoor temperature (in °C or °F) Humidity inside Bar chart SINCE-function for displaying the total precipitation from a certain point in time Lowest and highest value display Max-/Min-values storage Backlight Battery operated (Station: 2x AA; Sensor: 4x AA - not included!) SCOPE OF DELIVERY Rain gauge Base station Detachable stand Installation material Operation manual

The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included! The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated. A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol. Furthermore, the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the ''moonstruckers'' also the different phases of the moon are shown. An alarm function with snooze mode is also integrated. FEATURES 5-in-1 outdoor multi sensor Inside temperature (°C/°F) and humidity Outside temperature (°C/°F) and humidity Wind direction and speed Graphical weather trend display (12 hours) Beaufort index (scale for the classification for wind speeds) Precipitation rate with history (day/week/month) Air pressure with history (24 hours) Heat index Dew point Radio controlled time and date setting Phases of the moon Alarm function Ice/frost warning Min/Max memory (up tp 24 hours) LED background light, amber SCOPE OF DELIVERY Base station with stand 5-in-1 Multisensor with mounting material Manual Additionally, 6 AA batteries are required (not included) PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging: Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802520. Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.

Compared with the Professional 6-in-1 Wi-Fi Weather Station (item no. 7002540000000), the new BRESSER Professional 7-in-1 Wi-Fi Weather Station has a new light intensity measurement function. The 7-in-1 weather station measures a wide range of meteorological data directly in your vicinity, which can be viewed remotely via the internet. If you require additional functions, the weather station can be expanded with a range of optional sensors: BRESSER soil temperature and moisture meter (item no. 7009972) BRESSER Spa and pool thermometer (item no. 7009973) FEATURES OF BASE STATION Wi-Fi connection with internet time synchronization and support for firmware updates Automatic or manual time setting Publish your weather data on Wunderground or Weathercloud Displays indoor temperature (°C/ °F) and humidity (%) Outdoor temperature (°C/ °F) and humidity (%) Light intensity (Klux / Kfc / W/m²) Displays the current UV index, exposure level and recommended protection Displays sunburn time (mins) based on current UV level Wind direction and speed (m/s; km/h; Knoten; mph) Beaufort index (scale for measuring wind speed) Air pressure with 24-hour history (hPa/inHg/mmHg) Rainfall with history (day/week/month) Graphical weather forecast for next 12-24 hours Weather index (‘feels like’ function, dew point, heat index, wind chill factor) Trend indicator shows the weather trends for the next few minutes Visual comfort level indicator for room temperature and humidity Phases of the moon Sunrise and sunset times Alarm with snooze function (5 minutes) Weekday alarm Min/max memory (up to 24 hours) Ice/frost warning LED backlight, amber-coloured Wall bracket and table stand Supports a 7-in-1 sensor and up to 7 indoor sensors (includes 1x 7-in-1 sensor and 1x indoor sensor) Dimensions: 215 x 172 x 29 mm and weight: 639 g Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included) Security type: supports WPA3 encryption as of firmware 1.09 FEATURES OF 7-IN-1 OUTDOOR SENSOR Measurement of temperature, humidity, wind speed, wind direction, precipitation quantity, UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Range: up to 150 m Dimensions: 390 x 174 x 465 mm FEATURES OF INDOOR SENSOR Measures the indoor temperature and humidity Transmission range: up to 150 m RF frequency: 868 MHz Transmission interval: 60 seconds Wall bracket and table stand Power supply: 2x AA batteries (not included) Dimensions: 60 x 113 x 39.5 mm and weight: 144 g SCOPE OF DELIVERY Base station with stand 7-in-1 multi-sensor with mounting materials Thermometer/hygrometer Power adapter Instruction manual

The NATIONAL GEOGRAPHIC VA colour weather station with 4 measuring points in black displays all relevant weather data at a glance. The set includes 3 outdoor sensors and one built-in sensor. On the clearly arranged colour display you will find information such as temperature and humidity for indoor as well as outdoor, as well as the exact time via DCF radio transmission. Besides the built-in sensor in the console unit (display) the station is able to receive the temperature and humidity readings from three additional sensors which are included in this set. Its use is therefore very versatile as the sensors can be placed either in- or outdoors. What's the temperature in the kids room, is the basement too moist how cold is it outside? All these questions can be viewed on one display. The station has a time offset function, so although parts of the UK are technically able to receive the European DCF time signal (southern England), your station will be displaying the UK time. For all parts of the UK where the time signal can not be received the time can easily be set manually with this station. The featured weather forecast is for the coming 12-24h. FEATURES BASE STATION LCD colour display Indoor temperature (°C/°F) and humidity Outdoor temperature (°C/°F) and humidity Display of time, date and weekday Time by DCF radio signal with time offset function for the UKWeather Forecast Maximum connectable sensors: 3 (3x included!) Hanging device and stand Power supply: Power plug with UK adapter (included) FEATURES SENSOR Measurement of outdoor temperature (°C / °F) and humidity LCD displayRange up to 80 m Can be placed on a table or wall-mountedPower supply: 2x AAA batteries per Sensor (not included)  Dimensions: 71 x 65 x 23 mm; weight: 44 gSCOPE OF DELIVERY Weather station 3x outdoor sensors Instruction manual

Thermo/Hygro sensor suitable for the BRESSER Thermo/Hygrometer weather station with the article numbers: 95-01200, 95-01201, 95-01202 & 70-07400This outdoor sensor for weather stations, article numbers: 7009993, 7009995 or 7009996.FEATURESSuitable for the following BRESSER weather stations: 9501200, 9501201, 9501202 & 70074003 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included)SCOPE OF DELIVERYThermo/Hygrometer

Particulate matter: invisible yet always present. In large amounts, these small particles in the air can be harmful to our respiratory system. With the BRESSER PM 2.5 / PM 10 particulate meter, you can take control of monitoring the air quality. The European limits and WHO recommendations for air quality are regularly exceeded, especially in big cities. Heavy traffic, industry and agriculture significantly increase the concentration of particulate matter. To let you know when the air quality is poor, the particulate meter's wireless sensor takes precise measurements of two types of particulate matter that can be harmful to your health: Particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). The excellent sensor made by the renowned Swiss manufacturer Sensirion guarantees very precise measurement results. Thus, the particulate meter is also the perfect source of information for people with allergies in order to keep an eye on the pollen count. And you don't need to be an expert in order to determine whether the readings are within a healthy range: The air quality index shows you in 6 colour-coded levels whether the air is clean. Historical air quality data The damage that air pollution does to our health doesn't happen overnight. The particulate matter meter therefore records a range of historical readings, including the maximum readings from the past hour and 24 hours, and the overall historical maximum, to give you better idea of trends in the air quality. To view the current reading - regardless of the measurement interval settings - simply press the button on the sensor. The device also features a high alarm function: simply configure your desired limit for particulate matter and the alarm will sound when the limit is reached. If you normally measure the air quality indoors, but want to know whether the air is clean before you spend a sunny day in the garden, you can use the wireless sensor. The wireless sensor can also be used individually and shows you the particulate matter readings on the built-in display. Armed with this sensor, you can measure particulate matter both indoors and outdoors. Also ideal for travelling! Particulate matter meter with fresh air function Good air quality is about much more than clean air. A good indoor climate is also essential for our wellbeing. For this reason, the particulate matter meter also features a built-in thermo-hygrometer so that you can monitor your indoor climate in more detail. If you have mould stains in your bathroom or the air in your child's bedroom is too dry when you turn the heating on, you can take preventive measures by referring to the indoor temperature and humidity readings on the base station. What's more, if you put the air quality meter in your bedroom, it can also double up as an alarm. Simply set the time at which you want to get up and enjoy your well-earned sleep until the alarm goes off. If you want a few extra minutes in bed, you can press the snooze button to silence the alarm for 5 minutes. Monitor your air quality - with the BRESSER PM 2.5 / PM 10 particulate meter. BASE STATION FEATURES Very precise air quality meter with wireless sensor Easy to use PM2.5/PM10 air quality index (AQI) with colour coding Ideal for people with allergies to keep an eye on the pollen count Records the maximum values from the past hour and past 24 hours, as well as the overall historical maximum High alarm function Alarm function with snooze button Measures the indoor temperature (°C/°F) and humidity Amber-coloured LED backlight Supports up to four PM2.5/PM10 wireless sensors Power supply: 2x AA batteries (not included) Installation: Wall or stand SENSOR PROPERTIES Precise indoor and outdoor PM2.5/PM10 measurements Swiss precision technology: fine particulate matter sensor made by Sensirion Built-in display Can be used independently High range of up to 150 m Battery indicator Power supply: 3x rechargeable AA batteries (included), rechargeable with USB cable (included) Installation: Wall or stand DELIVERY CONTENT Base station PM2.5/PM10 wireless sensor 3x rechargeable AA batteries USB cable