BRESSER Twilight I telescope mount with tripod

Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070.Universal charger with flexible connection optionsOne USB-A connection socket is available for powering your devices. There is also an additional universal connection socket for DC bar plugs with a diameter of 5.5/2.1 mm. A universal connection cable with a 5.5/2.1mm DC bar plug on both sides and a length of 2 metres, as well as 3 plug adapters (3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 2400mA (2.4 amps). So 3000 : 2400 x 75 = 94 minutes. Dividing the result by 60 gives the charging time in hours: 1.6 hours.This means that an average smartphone can be fully charged in just about 1.6 hours with a 21-watt solar panel. Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. If you attach it to your backpack, you can even use the time during a hike for charging. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 21 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via USB A and DC hollow plug with adaptersMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 21 wattsOutput voltage at the DC socket: 18 voltsOutput current at the DC socket: max. 1.1 ampsOutput voltage at the USB A socket: 5 voltsOutput current at the USB A socket: max. 2.4 ampsCable length of the DC connection cable: 2.0 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 290 x 195 x 35 mmDimensions when unfolded: 815 x 290 x 20 mmWeight: 1,0 kgSCOPE OF DELIVERYSolar panel 21 Watt (1 piece)Carabiner hook (2 pieces)DC connection cable (1 piece)Plug adapter (3 pieces)User manual

For remote control of a BRESSER MCX 102/127 Goto Telescope or a BRESSER EXOS-II EQ Goto Mount via computer cable. Navigate your telescope comfortably with navigation software and Windows 10 computer. One click on the star map on the computer and the telescope is positioned on the desired object. NOTES(This list is exemplary and not exhaustive)To control a BRESSER MCX Goto telescope, no software update of the Computer Handbox is required. A direct use is therefore possible. To control a BRESSER EXOS-II EQ Goto mount, the Computer Handbox must be updated to software version v2.3 with the help of this computer cable set. This cable set is not suitable for the EXPLORE SCIENTIFIC EXOS-2 with PMC-Eight Goto. This set does not include navigation software and computer. DOWNLOAD NAVIGATION SOFTWARE (alternatively)Sky Map Pro Demo: https://nextcloud.bresser.de/s/PnQr9gyigxp9A6zSky Map Pro ASCOM PLUG-in: http://download.ascom-standards.org/plugins/SkyMapProPlugin.zip Carte Du Ciel: https://www.ap-i.net/skychart//en/startStellarium: https://stellarium.org/de FEATURESConnects a BRESSER MCX102/127 Goto to a PC Connects a BRESSER EXOS-II Goto to a PC Comfortable control by computer USB to serial adapter included Required firmware update for EXOS-II included Compatible with WIN 10 + 11SCOPE OF DELIVERYRS-232 computer cable USB 2.0 to RS-232 adapter + driver CD-Rom Firmware v2.3 for EXOS-II Goto Handbox Flash Utility Software for Handbox Update ASCOM driver for BRESSER MCX/EXOS-II Goto Operating instructions

Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with a solar panel (available as an option). Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.FEATURESPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputInstruction manual

With this adapter, you can operate your Bresser MCX 102/127 Goto telescope, BRESSER 80/400 Goto or National Geographic 70mm/90mm Goto telescope using a 230V~ wall connector.

Flexibility and precision, that's what BRESSER ball heads stand for.By means of the 360° rotatable and additionally 90° tiltable ball joint the camera can easily be brought into any desired position. For panoramic photos the ball head is also equipped with a 360° rotatable base plate. Both, the ball joint as well as the panoramic base plate can be moved smoothly and jerk-free and locked in place securely with the corresponding knobs. The integrated circular bubble level and the angle scale help with the exact positioning.The quick release plate allows for a quick and uncomplicated exchange of cameras. The BH-52MT ball head is suitable for all heavy DSLR and medium format cameras up to a total weight of 15 kg. ​FEATURESsturdy metal ball head for cameras up to 15 kgrubber coated quick release plate  (6 x 4,8 x 1 cm) for shock absorption1/4'' photo screwintegrated circular bubble level360° rotatable base plate with angle scale3/8'' tripod threadSCOPE OF SUPPLYBall headQuick release plateManual

Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual

The Vixen rigid Accessory Tray for HAL130 and Porta II Tripods offers practical storage space for eyepieces and various accessories.It also improves the overall stability of the tripod.The tray can be used on the HAL130 and SXG HAL 130 for GP and SX, as well as on the Porta II tripod.PROPERTIESFor eyepieces and various accessoriesIncreases the stability of the tripodsCan be used on HAL130, SXG HAL 130 and Porta tripodsWHAT'S INCLUDEDTray for tripodsScrew set 

High-quality, stable aluminium tripod for a variety of mounts with 45 mm connections. The aluminium profile ensures firm positioning with a minimum amount of vibration. Suitable for GP2, GPD2, AP, SX, SXP, SXP2 and AXJ mounts or similar with 45 mm connections. FEATURES Robust aluminium tripod without mount Suitable for: GP-, SX- & AP mounts Height-adjustable: 81 - 130 cm Weight: 5.5 kg WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

​The BRESSER EQ-3 is a German equatorial telescope mount that can be used universally for light to medium-weight telescope tubes with a net weight of up to 5 kg.The only requirement for telescope tube mounting is a universal Vixen profile GP dovetail mounting bar - found on many commercially available telescope. This high-quality equatorial mount allows easy alignment to the celestial pole in no time and then allows tracking of all celestial objects manually with its single RA axis. Both RA and DEC axes come with manual slow motion control cables, for easy adjustment of your telescope's pointing.  Also included is a sturdy, yet lightweight, aluminium field tripod, which can be individually adjusted in leg height to give you perfect stability, even on rough ground. The included 1.5 kg counterweight is used to adjust the balance between the telescope tube and the mount.  Further counterweights can be supplied if needed. NOTE: If you want automatic Right Ascension tracking of celestial targets, this telescope mount can be equipped with the optional motor set Art. 4951400.FEATURESGerman equatorial telescope mountFor light to medium-weight telescope tubes of up to 5 kg net weightUniversal Vixen GP-style dovetail holderEasy polar alignment with adjustable altitude and azimuth axesAllows convenient tracking by slow motion right ascension axisWhat's IncludedBRESSER EQ-3 mountField tripodCounterweight 

Additional counterweight to balance heavy accessories etc.

Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. It is also suitable for charging large power stations such as the BRESSER Power Station 100 Watt (art. no.3810000) and the BRESSER Power Station 500 Watt (art. no. 3810020) as well as power stations from other manufacturers with suitable connection values.Universal charger with flexible connection optionsThere is one USB-C connection socket and another orange USB-A connection socket with QC3.0 standard for powering your devices and also for fast charging of newer generations of devices. An additional universal connection cable with a hollow DC plug 5.5/2.1 mm in diameter and 2.5 metres long, as well as 3 plug adapters (3.5/1.35 mm, 5.5/2.5 mm, 8.0/5.5/0.8 mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example 1: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 3400mA (3.4 amps). So 3000 : 3400 x 75 = 66 minutes. Dividing the result by 60 gives the charging time in hours: 1.1 hours.This means that an average smartphone can be fully charged in just about 1.1 hours with a 120-watt solar panel.   Example 2: A large power station battery with a capacity of 13000mAh (13.0 Ah) and a charging current via 18 volts DC plug connection of 6600mA (6.6 amps). So 13000 : 6600 x 75 = 148 minutes. Dividing the result by 60 gives the charging time in hours: 2.5 hours.This means that an average smartphone can be fully charged in just about 2.5 hours with a 120-watt solar panel.   Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points.Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 120 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets, power banks and larger power stations etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection of USB devices via 1 x USB-C and an orange USB-A socket with QC3.0, also for fast charging. Connection of power stations via hollow DC plug, incl. various adapters. AdapterMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONS Output power of the solar panel: 120 wattsOutput voltage at the DC connection cable: 18 voltsOutput current at the DC connection cable: max. 6.6 ampsUSB-C connection socket: 1 x USB-C (for fast charging).Output voltage and current at the USB-C socket: 5V3.0A/9V2.0A/12V1.5AUSB-A socket: 1 x USB orange QC3.0 (for fast charging)Output voltage and current at the orange USB-A QC3 socket: 5V3.4A/9V2.5A/12V2.0ADC connection cable length: 2.5 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 520 x 370 x 50 mmDimensions when unfolded: 1660 x 520 x 35 mmWeight: 4.6 kgSCOPE OF DELIVERYSolar panel 120 Watt (1 piece)Carabiner hook (4 pieces)Integrated DC connection cable (1 piece)Plug adapter (3 pieces)User manual

7 kg counterweight for balancing the mount with heavy telescopesSuitable for AXD, AXD2 and AXJ mountsFEATURES Counterweight for AXD/AXJ mounts Weight: 7 kgDELIVERY CONTENT7 kg counterweightClamp screw