BRESSER T2 Extension Tube Set

Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.   

BRESSER 5mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 5 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

T-Mounts / Bajonet adapters are the connecting piece between the photo adapter and the camera. Please read the instruction manual of your camera to find out which T-Mount / Bajonet adapter you need, look into the instruction manual of your camera. Connect your BRESSER Microscope or Telescope with a Canon R/RP camera and take images or videos of your observed object!FEATURESCapture photos through your telescope or microscopeConnecting piece between the photo adapter and Canon R/RP cameraHigh-quality and precise workmanship made of metalA corresponding photo adapter is neededConnecting thread: T2 / M42x0.75 femaleOptical path: 10.0 mmSCOPE OF DELIVERYT2 Ring / Bajonettadapter for Canon EOS R/RP

The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)

Enter the world of astrophotography now - with the new EXPLORE SCIENTIFIC 4K DEEP SKY ASTRO Camera including ST4 autoguider function. This is truly new: Equipped with the new high-sensitive SONY IMX585 Exmor CMOS colour sensor, this astronomy camera delivers amazing image results with extremely short exposure times even with basic telescope equipment. In addition, this ultra-modern camera can also be used as an autoguider, e.g. to actively track the main imaging device with an SLR or CCD astro camera. An all-round camera that delivers super-sharp and high-resolution planetary images. The high 4K resolution of 3840x2160 pixels guarantees the best possible image result. Sensor The secret to the high light sensitivity is SONY's new back illuminated Exmor CMOS sensor. It increases the quantum efficiency to up to 77 % at 533 nm, which leads to an extremely high light sensitivity and thus particularly bright and high-contrast photos. In addition, the particularly low noise level of this new CMOS sensor generation by SONY ensures exceptionally high brilliance and no active cooling is required. Nevertheless, this astro camera has an elaborate internal structure made of aluminium for ideal heat radiation and a fan that can be switched on via software. When used with suitable telescopes, the high native pixel resolution of 3840x2160 enables very nice overview images of the moon, but also detailed planetary images. Solar Imaging This camera is also recommended for solar astro-photography. Especially the Lunt LS40 THa solar telescopes (item No. 0551145/0551146/0551147), with their short focal length, allow in combination with this planetary camera with its large sensor great overview images of the sun. Important Note: When observing and taking photos of the sun, always use a suitable protective solar filter or a special solar telescope. Otherwise there is a risk of immediate blindness and damage to the camera. Software The included Explore Capture professional software offers not only the necessary basic functions for image and video capture, but also many helpful special functions for image post-processing and for setting up the guider. Functions such as live image display, exposure settings, white balance, dark image capture, stacking, timelapse recording and much more can be configured individually. Especially the very sophisticated software makes it really easy for you to get started in astrophotography. With the automatic settings you can produce absolutely presentable results without a lot of prior knowledge. And when you are ready, simply switch off the automatic settings and gradually venture into the individual professional settings. Automatic tracking control Connect the camera directly to the ST4 port of your telescope mount and you have a fully automatic tracking control. Thus, long exposures of several minutes are possible without the stars producing unwanted star traces due to the always existing periodic error of the telescope mount gears. A corresponding ST-4 connection cable is even included in the camera's scope of delivery. Because of the high light sensitivity of the camera, you will always find a suitable guide star even with very short exposure times. Simple automatic tracking at its best. Connection For the connection to telescopes, guiding scopes or off-axis guiders the camera has a 1.25'' socket with 1.25'' filter thread (M28.5x0.6) and a large T2 connection thread (M42x0.75) directly on the housing. IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10 or 11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, GuideDog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers see download folder "Manuals" or here: http://www.touptek.com/download/showdownload.php?lang=en&id=2 Sample photos made by Lóránd Fényes in Hungary: https://fenyeslorand.hu/naprendszerunk/ https://fenyeslorand.hu/explore_scientific_4k_review/ https://fenyeslorand.hu/asztrofotok/ FEATURESHighly light-sensitive USB 3.0 4K colour camera Suitable for taking pictures of deep sky objects, the Moon and planets Integrated ST4 guiding function Allows very short exposure times for super-sharp planetary images Camera type: EXPLORE SCIENTIFIC G3CMOS08300KPA colour Image sensor: NEW Sony IMX585 Exmor CMOS colour sensor, back illuminated Data output: still images and video Image and video format output: 3840 x 2160 (4K) & 1920 x 1080 (Full HD) pixels Framerate: up to 43 and 66 FPS (for video) Physical sensor size in pixels: 3840 x 2160 (4K) Possible exposure times: 0.1 ms to 60 min Binning: Yes, 1x1 and 2x2 Megapixel: 8.3 MP Sensor size: 11.14 x 6.26 mm Image diagonal: 12.86 mm Pixel size: 2.9 µm x 2.9 µm Bit depth: 8/12 bits, switchable ST-4 compatible autoguider: Yes CNC machined aluminium housing Camera connection diameter: 1.25'' ( 31.7 mm) Camera connection thread: T2 thread (M42x0.75 mm) and 1.25'' filter thread Camera connection to PC: USB 3.0 Required backfocus: 17.5 mm Shutter type: Global shutter Heat radiation via built-in fan (switchable via software) Operating temperature: -10 to +50 °C (30-80 % RLH) Cable length USB 3.0: 150 cm Camera diameter: 68 mm; length: 85 mm Camera weight: 0.3 kg Software: Explore Capture included Camera driver and ASCOM driver and SDK included PC requirements: CPU Intel Core2 2.8Ghz or higher / 2 GB Ram / USB 3.0 Operating system: WINDOWS 10 + 11 Field of view for different focal lengths in minutes of arc: 400 mm - 95.6' x 53.8' 500 mm - 76.5' x 43.0' 600 mm - 63.7' x 35.8' 700 mm - 54.6' x 30.7' 800 mm - 47.8' x 26.9' 900 mm - 42.5' x 23.9' 1,000 mm - 38.2' x 21.5' 1,250 mm - 30.6' x 17.2' 1,500 mm - 25.5' x 14.3' 1,750 mm - 21.8' x 12.3' 2,000 mm - 19.1' x 10.8' SCOPE OF DELIVERY4K Planetary Astro Camera & Guider 8.3 MP 1.25 inch (31.7 mm) plug-in adapter with filter thread USB 3.0 connection cable 150 cm Control cable for ST-4 autoguider function 150 cm Dust cap for camera opening Software (via download) Instruction manual (via download)

Capturing beautiful moments with your SLR camera on a photo is sometimes limited when it comes to long distances. Simply connect your SLR camera to your scope with this Photoadapter and benefit from the high magnification of the scope to overcome this problem and capture the smallest details on photo. Inner diameter: 40-54mm Inside dimension Length: 68 - 81mm All you need is your camera, a spotting scope of the Dachstein or Prisch Gen II series and this photo adapter as well as the matching T2 ring for your camera and the fun can start. Suitable for: BRESSER Pirsch Gen II spotting scopes BRESSER Dachstein spotting scopes BRESSER Condor Gen II spotting scopes BRESSER 15-45x60 Spektar spotting scope Spotting scopes of other brands

NOTE: This item is a used or returned product. This means: The item may show slight signs of use; some accessories may be missing; the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.

Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.