BRESSER Stereo Microscope Science ETD-201 8-50x Trinocular Zoom with MikroCam PRO HDMI 5MP Microscope Camera and Full HD MINI HDMI Display (13.3")

The Full HD display is the ideal addition to the BRESSER MikroCam Pro HDMI and MINI HDMI.The display can be mounted directly on the camera using an adjustable bracket. It provides brilliant images without artefacts, as the display has the same resolution as the output image of the camera. With the MikroCam and HDMI display set, almost any trinocular microscope with a camera connection can be upgraded to a digital microscope. This means that observations can be made independently of a PC. The size of the display has been optimised so that the microscope user can microscope as usual and view the image on the monitor at the same time. The display provides optimum image quality with a large viewing angle of 178°! This means that several people can view the image without any loss of quality. The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. The quality of the image displayed using an HDMI microscope camera on an HDMI monitor is therefore usually better than when using a USB camera on a laptop or PC. This is particularly advantageous when delicate work is done under microscopic control. Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Higher magnifications with their high numerical aperture are particularly unpleasant for users with eye problems such as mouches volantes (vitreous opacities). Digital viewing can provide a remedy here. The display can be operated with the same power supply unit as the camera using the enclosed Y-cable. A suitable, short, angled HDMI cable is also included to avoid cable clutter in the workplace. Mounting on a MikroCam PRO or MINI is carried out using two screws. Screws and tools are included in the scope of delivery. FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply unit required SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply unit Mounting screws (2 pieces) Allen (hex) key Instruction manual

Powerful combo set for precise observations and sharp images. This high-quality set combines the professional Advance ICD stereo microscope, the modern MikroCam PRO HDMI autofocus microscope camera, a 0.5x reduction lens, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and plastic due to the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focus drive with coarse and fine adjustment. This allows particularly sensitive focusing at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows very large objects up to an object height of approx. 22 cm to be observed.The bright LED incident light illumination is adjustable in its inclination. The particularly even and bright LED transmitted light illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently adjust the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements.These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch deflects the image of the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected.APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teachingMICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible, among others, with BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and delivers brilliant and high-contrast images. Due to the very high light sensitivity, good image quality is ensured even in low light. This model is therefore particularly recommended for darkfield or phase contrast.The autofocus allows optimal focusing of the camera without using the microscope's focus wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from position 0, which corresponds to the C-mount distance, to a maximum focus of 5.4 mm forward, which also reaches the CS-mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused via mouse. Focus adjustment to a specific area is also possible.The camera functions are operated via mouse directly on the on-screen menu. Measurements can be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a wide range of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThis makes the MikroCam PRO Autofocus an excellent industrial camera with a very good price-performance ratio.Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). A USB connection to the PC is not provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model.MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-mount thread: for easy adaptability, also suitable for C-mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display delivers optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when working under microscopic control.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included to avoid cable clutter at the workplace. Mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyOperating instructions