BRESSER Single Polarizing Filter 1.25"

This Herschel wedge is designed for superior White-Light solar observing and imaging. It can be used with refracting telescopes up to 102mm aperture, with 1.25'' focuser. This complete system comes with installed ND3.0 filter.Herschel Wedges are used to observe the sun in White Light. Around 95% of the Sun's light is suppressed by the wedge's ceramic prism. The remaining sun light is dimmed further by a factory-installed ND3.0 grey filter. Lunt Solar Systems Herschel wedges are installed in a fully closed housing with integrated heat trap. No stray light can escape from this, therefore it is very safe method of observing our nearest star.The difference between Herschel-wedges and normal front mounted filters is that the filtering takes place just before the eyepiece or camera. This provides better contrast and sharpness of the solar image - with more surface detail visible as a result.  Furthermore, a Herschel wedge is inherently safer than at a front mounted filter. A Herschel wedge can not rip or become punctured like a foil filter can be and it cannot become detached from the telescope objective accidentally.Only for use with refractor telescopes up to 102mm aperture:Because the full energy and heat of the sun inside the telescope, we advise solely using refractors for Herschel-wedge use. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflecting telescopes, could suffer from thermal build-up by concentrated solar energy and could be permanently damaged.Tuning the brightness:Because the Herschel-wedge produces polarised light, you can use a normal polarising filter at the eyepiece, or camera-adapter. By turning the polarising filter the image brightness can be varied to the user's liking.This additional Polarising filter is not included. We recommend the BRESSER 1.25'' polarising filter, no: 4946464.FEATURESFor refractor telescopes up to 102mm apertureConnection to telescope: 1.25''Connection to eyepiece: 1.25''90° housing like star-diagonalEspecially high-quality optical surfaces for very good contrastFully closed housing with integrated heat trapNo stray light escaping - therefore it is very safeThe needed ND3.0 filter is fix installedWHAT'S INCLUDEDHerschel-wedge for 1.25'' focuserIntegrated ND3.0 filterTransport caseInstruction manual

BRESSER 6.5mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 6.5 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

Adapter 2" with brass locking ring for 1.25" eyepieces. Enables the use of 1.25 inch accessories in the larger 2 inch holder. On the telescope side there is a 2" filter thread M48x0.75, which allows the easy use of colour and nebula filters.SCOPE OF DELIVERYCamera adapter

BRESSER Eyepiece K 20mm 1.25" Category: Replacement part for Carbon Look Telescope series Description: The BRESSER Eyepiece K 20mm 1.25" is a quality eyepiece with a focal length of 20mm. The fitting diameter is 1.25 inches (31.7mm), suitable for standard magnifications. Suitable as a replacement part for the BRESSER Carbon Look Telescope series. The lens surfaces are coated to suppress reflections. The reversible rubber eyecup provides additional comfort.

BRESSER 15mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 15 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

L-eNhance Filter for deep sky nebula photography from the cityThe relentless spread or urbanization and its associated light pollution have become a growing problem for all amateur astro photographers. The current solutions to the problem can be expensive and might include the purchase of a monochrome camera, several types of narrowband filters and a filter wheel. Especially with inexpensive newtonian telescopes, double-lens ED refractors or even achromats, the L-eNhance filters open up completely new possibilities for the capture of high-class astronomical images even out of the light polluted city. CMOS cameras can deliver images like monochrome cameras. This new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources. The narrow bandpass for the wavelengths of O-III, H-Beta and H-Alpha and the almost complete attenuation of the interfering light sources of these new filters make this an ideal solution. L-eNhance Description  L-eNhance provides an economical and practical solution for amateurs. It is a tri-band pass filter which has been designed for DSLR (digital SLR), color CMOS and monochrome CCD cameras. The convenience and cost-effectiveness of this filter allows amateurs to take a rich selection of astronomical images, even in bright, heavily light-polluted areas. We believe the design of our L-eNhance filter is a technical innovation among filters. It effectively isolates the H-Alpha, H-Beta, and Oxygen III nebula emission lines and achieves a maximum transmission of up to 90%. The performance of this filter delivers images that superbly control the impact from light polluted skies.  Main Use and PerformanceThis new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources. The narrow bandpass for the wavelengths of O-III, H-Beta and H-Alpha and the almost complete attenuation of the interfering light sources do not require very large or extremely expensive telescopes. No, especially with inexpensive newtonian telescopes, double-lens ED refractors or even achromats, these filters open up completely new possibilities for high-class astronomical images. Furthermore, with the help of these filters, CMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras. WARNING: These nebula filters are not designed for sun observation. DO NOT LOOK AT THE SUN WITH THIS FILTER. You will go BLIND if you ignore this warning. Coating technology L-eNhance has a multiple anti-reflective coating on the optical substrate. The L-eNhance filter uses a precision coating based on ion deposition coating technology. This ensures durability and scratch resistance as well as stability on the CWL (central wavelength), which is not affected by temperature changes. Absolute precision and homogeneity of the coatings as well as maximum values for transmission in the passband and optical density in the off-band range are guaranteed for all filters. FEATURES Professional photographic filter for astronomy Improves deep sky emission nebula photography Best choice for enhanced light pollution suppression For taking pictures also from highly light-polluted areas Tri-band filter with high transmission for O-III, H-Beta and H-Alpha linesDoes not require very large or extremely expensive telescopesExcellent results also with inexpensive newtonian telescopes, double-lens ED refractors or even achromatsCMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras Balanced colour for a natural image Filter diameter: 2,0 inches / 50,8 mm Connecting thread: M48x0.75mmSelected optical glass material Spectrum: 300-1000nm Off-Band Blocking: > 99% Surface Quality: 60/40 (Refer to MIL-O-13830) Fine-optically polished to ensure accurate 1/4 wavefront and highest parallelism over the both surfacesHigh transmission at major nebula emission lines (i.e. H-alpha 656nm, OIII 496nm&500nm and H-beta 486nm). SCOPE OF DELIVERY L-eNhance filter (1pc) Dust protection box (1pc)