BRESSER Replacement HEPA air filter for 3D Printer REX (item no. #2010100)
Replacement HEPA Air Purification Filter for REX 3D Printer 2010100
- Replacement HEPA air filter for 3D Printer 2010100
- Replacement HEPA air filter for Flashforge Adventurer 3
€6.99*
% €15.99* (56.29% saved)Available, delivery time: 1-3 days
Product number:
2080203
GTIN/EAN:
4007922062006
WEEE-Reg.-Nr.:
DE 34716369
Product information "BRESSER Replacement HEPA air filter for 3D Printer REX (item no. #2010100)"
The BRESSER Replacement HEPA air filter for the BRESSER 3D printer 2010100, as well as compatible for the Flashforge Adventurer 3.
| Batteries included: | 0 |
|---|---|
| Batteries required: | 0 |
| Colour: | black |
| Extended warranty (years): | 5 |
| Material: | Plastic |
| Net Weight total (incl. accessories) (in kg): | 13 |
| Total height (mm): | 12 |
| Total length (mm): | 60 |
| Total width (mm): | 45 |
| Tripod height adjustment: | 0 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Fire risk: The nozzle and heated bed of the 3D printer can reach extremely high temperatures during operation. Avoid direct contact with these parts to prevent burns.
- Risk of inhaling fumes: Some filaments may release fumes when heated. Always use the filament in a well-ventilated area. If irritation occurs, stop printing and immediately improve ventilation.
- Fire risk: Store the filament away from open flames, heat sources, and direct sunlight. DO NOT exceed the recommended printing temperature, as this may cause overheating or fire.
- Suffocation risk: Keep filament spools and small packaging materials out of the reach of children to avoid suffocation risk.
- Proper use: This filament is only intended for 3D printing purposes. Do NOT use it for applications involving food, medical devices, or products intended for human consumption, unless explicitly stated as food-safe.
- Mechanical risk: Keep hands, hair, and loose clothing away from moving parts during operation to avoid entanglement or injury.
- Store the filament in a cool, dry place. Use airtight containers or resealable bags with desiccants to prevent moisture absorption, which could affect the print quality.
- Disposal: Dispose of used or damaged filament in accordance with local regulations. Do not burn the filament, as toxic fumes may be released.
- Allergy warning: Some filaments may contain materials that can trigger allergic reactions. If skin irritation or other symptoms occur, discontinue use immediately and consult a doctor if necessary.
- Failure to comply with these safety regulations may result in personal injury, damage to the printer, or poor print quality. Always read the entire manual before use.
Similar products
%
PLA Filament 1kg for 3D Printer
€14.99*
€29.99*
(50.02% saved)
The Bresser PLA filament material is manufactured with a diameter tolerance of ± 0.2 mm as standard, which allows the use not only for the Bresser 3D printer but also for any third party printer supporting PLA material with a 1.75 mm diameter.
Already during the production the material is monitored for the smallest impurities and therefore you always get the same consistent quality results.
Basic colours: blue, green, black, red, white, neutral.
For optimal processing of the PLA material during printing, we recommend an extruder processing temperature between 190 and 220 degrees C. The optimum printing speed is between 60 and 90 mm/s. We recommend heating the building platform to 40-50 degrees.
Please make sure that the printer fan is working properly and that the appropriate cleaning filter is accurately installed. Create a large variety of different looking objects using our BRESESR PLA filament materials.Properties of PLA: Biodegradable low melting point odourless Scope of delivery: 1 kg PLA Filament in your chosen colour