BRESSER RA Tracking Motor + Controller

Explore the beauties of the night sky with this complete telescope set. Everything is included so that you can get started immediately with the fascinating hobby of astronomy: the astronomical reflector telescope with 150 mm aperture and 1,400 mm focal length, the equatorial mount, the tripod and extensive accessories for exciting observations. Especially important for beginners: the system is very easy to use. Particularly the Moon, the planets and the Sun appear impressive through the Pollux-II. Powerful performance for your first celestial observations – the telescope Take your first steps in astronomy with this classic reflector telescope of the "Newton" type. Because it is equipped with an additional lens inside the focuser, it belongs to the group of the so-called "catadioptric" optics. One advantage of this combination of lens and mirror: despite the large focal length, the telescope tube is relatively short and therefore easily transportable. In addition, you can look forward to a comfortable observation position at all times. This is because with telescopes of this design you do not look in at the back of the telescope, but at the front and laterally. So you don't have to bend down, even if the reflector telescope is pointed vertically upwards at the sky. The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 1,400 mm focal length result in a focal ratio (ratio of aperture to focal length) of 1 to 9.3 (F/9.3). This allows you to enjoy viewing your favourite objects at high magnifications with good contrast. Admire especially the planets or details on the Moon through the entry-level telescope. But also some deep sky objects are very nice to observe: open star clusters, globular clusters and bright planetary nebulae such as the Ring Nebula M57 in the constellation Lyra can be seen beautifully through this astronomical telescope. But how close can you get to the celestial eye-catchers? The 150 mm aperture achieves a resolving power that allows magnifications of up to 300x with sharp images. The technical possibilities go far beyond this – theoretically up to 1,050x using the included accessories. However, as the magnification increases, the sharpness of the image can slowly decrease. In addition, high magnification also requires the right environmental conditions. For no matter through which telescope you look, the air turbulence in the atmosphere (seeing conditions) always influences your observation and magnification possibilities. Note for nature lovers: If you choose a Newtonian telescope like the Pollux-II reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Solid base for gazing skywards – mount and tripod Have you found the perfect location for your journey of discovery into the night sky? Then simply mount your astronomical telescope with the equatorial mount on the height-adjustable aluminium tripod. The special feature of this type of mount: after the so-called "alignment", the positioning of an axis parallel to the Earth's axis, the movement of the celestial bodies only has to be compensated for on this one axis. To do this, you simply point the axis approximately at Polaris. This is a huge advantage over the azimuthal mount, where both axes are moved simultaneously. In addition, the two flexible shafts with fine adjustment make adjusting and tracking the telescope very precise and comfortable. And to ensure that accessories are always at hand, they can be stored on the handy shelf between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Everything you need, night and day – the accessories The astronomical telescope comes with a wide range of equipment so that you can start admiring the Moon, planets or the Sun straight away. At night, the LED viewfinder helps you keep an overview of the sky. Once installed parallel on the tube and correctly aligned, the small red dot shows you where the telescope is pointing when you look through it. This way, you can align the optics precisely and find celestial bodies more quickly before you then take a closer look with the high magnification. Varying views of the universe: the two eyepieces allow you to marvel at your observation objects in different magnifications. They are simply inserted into the telescope's focuser using their sockets with a standardised 1.25 inch (31.7 mm) diameter. You want to see even more details? Then go for the 3x barlow lens, which triples the magnification of the eyepieces. If you would like to make astronomical discoveries even during the day, use the solar filter to observe the star of our own solar system. It allows you to easily and safely observe sunspots and granulation on the sun. CAUTION: Never point the telescope at the sun without the solar filter! Capture special highlights easily – with the smartphone adapter, you use your smartphone as a camera for your telescope. This way you can quickly take your first photos of the Moon or the Sun, for example, and get started in astrophotography. FEATURES Reflector telescope with 150 mm aperture and 1,400 mm focal length Reflector type catadioptric Well suited for observing the Sun, Moon and planets Height-adjustable tripod with equatorial EQ3 mount Precise adjustment through flexible shafts and fine adjustment in both axes Easy to use, very suitable for beginners Focal ratio F/9.3, therefore good for observing the planets and details on the moon 1.25 inch (31.7 mm) eyepiece focuser Two eyepieces and one barlow lens with 1.25 inch (31.7 mm) extension tubes for different magnifications Safe solar observation with the included solar filter Entry into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software download Instruction manual

The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"

Please note that this astronomy book for beginners is only available in German.

Explore hidden worlds through your own eyes – with the BRESSER Pollux-I telescope starter set for budding amateur astronomers, you can go on your own journey of discovery in outer space. Everything you need is already included: the astronomical reflector telescope with 150 mm aperture and 750 mm focal length, the equatorial mount, the tripod and a wide range of accessories for astronomical observations. Perfect for getting started quickly: the system is very easy to use. In addition, the entry-level telescope impresses with its versatility: you can observe the Moon and planets as well as star clusters, gas nebulae and even galaxies through the high-quality optics. Due to the parabolic primary mirror the image delights with impressive sharpness and high contrast. In addition, the 2-inch focuser allows for the use of high-quality eyepieces. Perfect conditions for fascinating sights of the night sky! Time-proven optics for your first astro-steps – the telescope By choosing the Pollux-I, you’ll start your journey to the stars with a classic Newtonian reflector telescope. Beginners are often surprised by the fact that with telescopes of this type you don't look in at the back of the tube, but at the front and laterally. This gives you the advantage of always being able to look into the telescope in a comfortable posture, even when it's pointed vertically upwards at the sky. In addition, these reflector telescopes offer optics that are absolutely free of chromatic aberrations and thus provide good imaging properties. The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 750 mm focal length result in a short focal ratio (ratio of aperture to focal length) of 1 to 5 (F/5). On the one hand, this makes the telescope fast and provide a bright image. On the other hand, high magnifications can be achieved. This combination makes the entry-level telescope so versatile. In addition, the Pollux-I is equipped with a parabolic primary mirror. The remarkable effect of this special mirror shape: you enjoy excellent imaging properties at all magnification levels. So you can look forward to the complete range of celestial highlights. At low to medium magnification, you can admire deep-sky objects such as open star clusters, globular clusters, gas nebulae and even galaxies such as the pair of galaxies M65 and M66 in the constellation Leo. And at high magnifications, observing the planets or details on the Moon is an absolute pleasure. You can get really close to your favourite objects: The aperture of 150 mm achieves a resolving power that allows magnifications of up to about 300x with sharp images. Technically, even higher magnifications are possible, theoretically up to 562.5x using the included accessories. However, with increasing magnification, the sharpness of the image can slowly decrease. In addition, the prevailing conditions always make a difference: How highly you can magnify always depends not only on the power of the telescope but also on the air turbulence in the atmosphere (seeing conditions). The telescope also impresses with its flexibility in terms of eyepiece compatibility: it comes with a 2-inch focuser (focuser extension) and an adapter from 2 inch to 1.25 inch. This enables you to use eyepieces with 1.25-inch sockets (about 31.7 mm) as well as eyepieces with the larger 2-inch sockets (about 50.8 mm) with large fields of view. Note for nature lovers: If you choose a Newtonian telescope like the Pollux-I reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Perfect foundation for fascinating discoveries – mount and tripod Your beginner's telescope is securely held by the height-adjustable aluminium tripod with equatorial mount. The special feature of this mount, also known as a parallactic mount: in contrast to azimuthal models, the movement of the celestial bodies is only compensated for on one axis instead of two. For this purpose, you simply align one axis parallel to the Earth's axis by pointing it approximately at Polaris. For precise and comfortable alignment and tracking of the entry-level telescope, the Pollux-I comes equipped with two flexible shafts with fine adjustment. And to ensure that the interchangeable eyepieces, barlow lens etc. always remain within reach, they can be stored on the tray between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Well equipped for the ideal start – the accessories Your entry-level telescope comes with a wide range of astronomy accessories so that you can start to be amazed right away. For example, the LED viewfinder helps you align the telescope and find celestial objects. Installed in parallel on the telescope, this direction finder shows you a red dot when you look through it. It appears to hover in front of the sky and thereby shows you where the telescope is pointing. Varying view of the sky: With the two eyepieces with 1.25-inch sockets (31.7 mm), you can admire your astronomical discoveries at different magnifications. The 3x barlow lens already included in the set triples the magnification of the eyepiece you are using. Enjoy safe observations of our Sun with the included solar filter. This way you can easily take a closer look at sunspots and granulation on our own star. CAUTION: Never point the telescope at the Sun without the solar filter! Astrophotography for beginners: with the smartphone adapter, you can use your mobile phone as a camera on the telescope. This way you will quickly impress friends and relatives with your own first snapshots e. g. of the Moon or the Sun. FEATURES Reflector telescope with 150 mm aperture and 750 mm focal length Reflector type Newton with parabolic primary mirror Very well suited for observing the Sun, Moon and planets as well as star clusters, gas nebulae and galaxies Height-adjustable tripod with equatorial EQ3 mount Precise movement through flexible shafts and fine adjustment in both axes Easy to use, very good for beginners Focal ratio F/5, thus very suitable for many celestial objects 2-inch (50.8 mm) focuser with adapter to 1.25-inch (31.7 mm) Two eyepieces and one barlow lens with 1.25-inch (31.7 mm) sockets for different magnifications Safe solar observation with the included solar filter First steps in astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Adapter from 2 inch to 1.25 inch Eyepieces: 4 mm and 20 mm (1.25-inch sockets) Barlow lens 3x (1.25-inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software as download Instruction manual

Filter Set 2 is recommended for Moon & Planets from 100mm (4") Aperture Set 2 includes the following filters: Explore Scientific Filter 1.25" Green No.56 - 0310262 The green filter is to increase the contrasts enormously between the red and the blue regions of the cloud structures on the gas planets Jupiter and Saturn. Seeing our Earth Moon through the green filter, the contrasts of each ray crater become clearly more visible. Explore Scientific Filter 1.25" Orange No.21 - 0310273 This one really supports the detection of the dark areas on the planet Mars. The details of the clouds of Saturn and Jupiter are also so much more visible through the Filter. Explore Scientific Filter 1.25" Yellow No.12 - 0310267 Watching the Moon surface through the filter, the contrasts will enormously increase. Same with planet Mars. On the huge planet Jupiter, when using the filter, you can even see the contrasts between the cloud-bands and a lot more details. Starting with a telescope diameter of 8“ and a clear sight, you even get to see various details of Saturn. Explore Scientific Filter 1.25" Blue No.80A - 0310264 The color of light blue really supports watching the high clouds on Mars. The contrast increases. The dark red structures will be shown even darker, so this is the perfect filter for watching the big red Flecks on the gas planet Jupiter. The rings of Saturn will be accentuated, the structures of the Venus Atmosphere will be even finer. What ist a color Filter for and do we really need it? Color Filters darken the light slightly, that reaches the eye or the sensor of the camera. This eliminates for instance stronger transitions. The result is that your picture turns out with more contrast which automatically shows more details. FEATURES Made from high-quality optical glass Filter glass is absolutely parallel All optical surfaces have anti reflex coatings Filter housing from black anodized aluminum Filter threads on both ends (female/male) Multiple filters usage is possible SCOPE OF DELIVERY 4pcs color filter protection-case

The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can perform celestial navigation without any wiring. The app turns your smartphone or tablet into a controller for the equatorial mount in no time. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired ones. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are available.Convenient operation When looking through the telescope operate the mount by swiping on the app's star map. Since there are no buttons, simply slide your finger over the star chart for convenient operation of the mount. Extensive astronomical data includedThis includes data on easily observable celestial bodies such as Messier objects, NGC objects, IC objects as well as the Sun, Moon, planets, comets and dwarf planets. High-precision alignment By aligning to one or two stars, you already get a fairly accurate positioning of the mount. By aligning to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects will then be approached precisely and centrally in your telescope's field of view. The alignment information is stored and can be retained even when the telescope is switched off. By leaving the telescope in its current state without moving it after completing an observation, the next time you observe you can start the automatic setup with the same settings for the next observation. Individual setting options As with the STAR BOOK TEN controller, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the lens tube inversion (meridian flip) as desired. Even if the object moves south during tracking, you can prevent the telescope tube from inverting. Important information: Cannot be used on old SX mounts with the old blue Star Book. FEATURES Can be used on: SX2, SXD2, SXD2-PFL, SXP, SXP-PFL, SXP2, AXJ (without encoder), AXD, AX Not compatible with old SX mounts with blue Star Book CPU: 32bit CISC processor 120MH Connector: D-SUB 9-PIN socket Autoguider connector: 6-pin modular connector for SBIG Operation: Android 6, iOS 9.0 or higher Wifi standard: IEEE802.11b/g Data encryption: WPA2-APK Firmware update: via WiFi connection Operating voltage: DC12V 0,1A (max) Power supply: via mount Dimensions: 56 x 36 x 19.5 mm, weight: 60 g SCOPE OF DELIVERY Vixen Wifi adapter