BRESSER Profi-WSC Wi-Fi Weather Station with 7-in-1 Sensor

The BRESSER Quadro Individuo S Thermo-Hygrometer gives you complete control over your home's climate. This clever device displays readings from 4 different locations on one screen, so you can monitor conditions throughout your house at a glance. Beyond basic temperature and humidity monitoring, it comes packed with handy extras like an alarm clock and memory storage for peak readings. Complete Home Climate Monitoring Made Simple The day begins in the cosily heated living room, the laptop awaits in the cooler study, and in the evening you wind down in the perfectly balanced bedroom - this system has you covered. The built-in temperature and humidity meters in the base unit work alongside 3 wireless sensors to give you a complete picture of your home's climate. You can label each sensor with custom room names, so you'll instantly know if the nursery's getting chilly or rather the basement's bang on target. Clever Features That Make a DifferenceWinter heating drying out your home? Bathroom getting a bit too steamy? The memory function tracks maximum and minimum readings, helping you spot overly dry air or potential damp issues in time. Start your mornings right with the built-in alarm and snooze function. Even better, you'll never need to adjust the time manually – it automatically stays accurate via radio signal. Wireless Sensors That Go the Distance Got a workshop in the garage or a spare room in the loft? These wireless sensors work from up to 80 metres away, bringing readings from every corner of your home straight to your bedside table. They're built tough too – IP44 water-resistant rating means they'll happily sit in steamy bathrooms, busy kitchens, or even outside in the garden. Each sensor has its own display as well, so you can check readings on the spot. Take control of your home's comfort with the BRESSER Quadro Individuo S Thermo-Hygrometer. FEATURES BASE STATION Built-in thermometer and hygrometer for local readings Displays data from all 3 wireless sensors Custom room naming for each sensor channel Temperature readings with trend arrows (°C/°F switchable) Humidity readings with trend indicators (%) Records and stores maximum/minimum values DCF Radio-controlled time display (12/24-hour format, weekdays in 7 languages)***Alarm clock with snooze function Runs on 2x AAA 1.5V batteries (included) Battery level indicators for base unit and all sensors ***PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the offset function. FEATURES SENSOR Set of 3 thermo-hygro sensors included Measures temperature and humidity (indoor/outdoor use) Individual display on each sensor for local readings Transmission range: up to 80 metres Water-resistant rating: IP44 (splash-proof) Dimensions: 71 x 65 x 23 mm / Weight: 44g Each sensor runs on 2x AAA 1.5V batteries (included) SCOPE OF DELIVERY Base station unit 3x wireless thermo-hygro sensors 8x AAA/LR03 1.5V batteries Instruction manual

Stay on top of the weather with the BRESSER 6-day 4CAST PRO SF 7-in-1 Wi-Fi weather Station with a solar-powered sensor! The weather station displays a 6-day weather forecast with maximum/minimum temperature readings, and also tells you the chance of rain. It also features a 10-inch colour display, which ensures that all the weather stats are easy to read. The modern Wi-Fi weather station with a solar-powered sensor obtains the forecast data via the Internet from the ProWeatherLive platform. In addition to the weather forecast, the weather station also displays the local visibility and cloud cover. Eco-friendly weather station with solar-powered sensor, ideal for amateur meteorologists The weather station comes with a solar-powered outdoor sensor, which is powered by solar energy and measures temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. Simply align the large solar panel with the sun according to your location. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries (not included) as a back-up during installation, and they will take care of the power supply. All the measurements will appear on the screen of the base station, which can be located up to 150 metres away. Wi-Fi weather station with feature-packed base station The base station of the 6-day 4CAST PRO SF weather station features a stylish design and displays the data received from the solar-powered sensor. It also takes its own readings via the built-in thermo/hygro sensor, which measures the ambient indoor temperature, humidity and air pressure. Together with the maximum/minimum memory, this enables you to keep an eye on the indoor climate and effectively prevent mildew and excessively dry air. Outdoor temperature, precipitation and more – you can also view the maximum/minimum readings for the other measurements made by the solar-powered sensor. Share weather data and use it with your smart home Access the measurements from your solar-powered sensor remotely and share them with others: with a few clicks, you can send your weather station data to the ProWeatherLive platform. If you have a smart home, you can also make use of the German-language portal AWEKAS, which allows you to transfer measurement data from the solar-powered sensor to your smart home system free of charge. Simply follow the link below to set up the weather station for your smart home system: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Never lose track of time In addition to its elegant, contemporary design, the 4CAST PRO SF Wi-Fi weather station allows you to keep track of the time, date, day of the week and moon phase via the large display. For people who enjoy watching the sunset or observing the moon, the weather station also displays the sunrise/moonrise and sunset/moonset times.  Solar-powered weather data: Stay informed of the weather with the BRESSER 6-day 4CAST PRO SF 7-in-1 Wi-Fi weather station with a solar-powered sensor! BASE STATION FEATURES 6-day weather forecast (today and 5 following days) Large 10” colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 219 x 200 x 26 mm FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual

NOTE: This base station is compatible with weather stations with item no. 7003300 AND LOT no. up to 1599948. You can find the item and LOT number of your weather station printed on the back of the base station. Elegant and colourful: The additional base station allows you to view the data from your Wi-Fi comfort weather station in an additional room, such as a bedroom. The readings from your 7-in-1 outdoor sensor including outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity are transmitted wirelessly, giving your everything that you need to decide what to wear for the day. Built-in alarm The additional base station will help to give you a relaxing start to the day. It features a built-in alarm and a snooze button that silences the alarm to give you an extra few minutes in bed. The clock is synchronized automatically via the Internet to ensure that you won't be late to work. The modern LCD colour display can be viewed from any angle and shows you all relevant weather data including a weather forecast to help you decide what to wear for the day. The additional base station also displays a range of other useful data, including the perceived temperature, sunburn time, Beaufort level and historical data. Smart function for icy weather: Thanks to the built-in frost alarm, the alarm goes off 30 minutes earlier when the outdoor temperature drops below -3 °C. Create the perfect indoor climate with the additional base station In addition to the outdoor conditions such as rain, wind and sunshine, the indoor climate can have a big impact on our health and wellbeing. The base station features a built-in sensor that measures the room humidity and temperature and stores the maximum and minimum values. This helps you to take action to prevent excessively dry air in winter and stop mould from forming in rooms with a high humidity, such as the kitchen. An optimal indoor climate is indicated by a smiley face on the graphical comfort indicator. If the display shows a frowning smiley, this indicates that you need to take action to improve the indoor climate. Get a better overview of the weather and your indoor climate with the additional base station for your Wi-Fi Comfort Weather Station. BASE STATION FEATURES 7.4-inch colour display with detailed time and weather information LCD display with adjustable contrast for multiple viewing angles Wi-Fi connection for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (in mins) Wind speed display (gusts or average wind speed) Beaufort scale display (scale for classifying the wind speed) Wind direction display (current and predominant, 16 directions) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow) Atmospheric pressure display Perceived outdoor temperature Weather index for dewpoint, windchill factor and heat index Min./max. memory (up to 24 hours) High/low alarm with flashing symbol on the display Alarm with ice/frost warning Time (synced via the Internet), date, day of the week and moon phase Sunrise and sunset Weather data calibration 3 different display brightness levels High/Low/Off 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports 7-in-1 wireless sensor (not included) Supports up to 7 additional wireless sensors (not included) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: Power adapter (included) and 3x AAA backup batteries (not included) Installation: Wall or stand DELIVERY CONTENT Base station Power adapter External sensor not included! Instruction manual

This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers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emperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

The BRESSER wildlife camera allows you to keep an eye on your home, garden, local forest or other location when you're not in the vicinity. Featuring an invisible infrared LED light, it is ideal for both home surveillance and capturing fascinating images of wildlife. Thanks to the 60-degree PIR motion sensor with a 20 metre range, the camera is automatically triggered when it detects even the slightest of movements, and can capture images in less than 0.6 seconds. In addition, the wildlife camera comes with a 5 MP sensor that can take stunningly detailed images at resolutions of up to 20 MP (interpolated). It can also record Full HD videos. Wildlife camera - keep an eye on animals and moving objects The wildlife camera can accommodate a microSD card with a capacity of up to 32 GB (not included) so that you never miss out on the action. Once you've inserted the card, simply select the PIR sensitivity (high or low), place the device in the desired location using the mounting strap, and wait for something interesting to appear! The camera continues to function at night thanks to the infrared LED light, which enables the camera to take black and white photos. During the day, images are captured in colour. The camera also has a waterproof design (IP65) so that you can continue to observe the surroundings even in adverse weather conditions. BRESSER wildlife camera - take automatic photos and Full HD videos, day or night! FEATURES Easy to use wildlife camera 20 MP photos* (5 MP sensor) Video resolution: 1920 x 1080 (25 fps) 60-degree motion detection at a range of up to 20 metres Colour images during the day, monochrome images at night Invisible 850 nm infrared light for nighttime images Field of view: 57.5° Trigger speed:< 0.6 seconds microSD card slot for cards with a capacity of up to 32 GB (microSD card not included) Low power consumption and long battery life (up to 6 months in standby mode) Waterproof (IP65) Power supply: 8x AA batteries (not included) PACKAGE CONTENTS Digital wildlife camera Mounting strap Instruction manual *Interpolated

With the Classic 70/350, BRESSER has developed a light weight and compact refractor telescope, with good light gathering power for sky observing, landscape and wildlife viewing alike. The telescope is very easy to set-up, easy to use and highly transportable. It is equally useful for nature enthusiasts, who are searching for a powerful telescope which offers a bright and sharp view, as it is for astronomers. It is ideal as a travel scope, due to its light weight and compact nature. The Classic 70/350 comes supplied with a 90° Erecting-prism (1.25"´/31,7mm) and shows an upright and corrected image. The supplied field tripod is a sturdy mount for the telescope. It is adjustable in height from 28-63inch (73-160cm) and makes the observation much more comfortable no matter what height the user is. A carry case for the tripod is also supplied.The telescope is provided with three eyepieces, a 20mm, 12.5mm and 4mm, giving respective powers of 17.5x (ideal for finding targets), 28x ideal for more detailed nature study and wide field astronomical targets) and 87.5x (this is enough to resolve Saturn as a ringed object and reveal a wealth of detail on the Moon).  As the telescope takes standard 1.25" gauge eyepieces, you can add to your eyepiece collection easily with eyepieces and other accessories (Barlow lenses etc.) from various manufacturers.  The maximum practical magnification of this telescope as around the 130x mark - though views of brighter targets like the Moon could be pushed a little further.The telescope is also supplied with a smartphone holder to take photos with your phone through the eyepieces - easily sharing the views you get with friends and family. FEATURES Quick set-up and no tools necessary Ideal for traveling because light-weight and compact Bright 5x24 optical finder scope with cross hair Erecting-prism for a upright and correct image Quick lock adapter on optical tube Easy and sensitive motion and lock possible due to the lever handle Powerful multicoated objective lens for a bright and tack-sharp image All accessories you need as supplied - getting started in only a few minutes WHAT'S INCLUDED Telescope tube Stable aluminium field-tripod, max. length 160cm 5x24 finder scope with crosshair 90° Erecting prism 1.25inch (31.7mm) 3 eyepieces: 20mm, 12.5mm and 4mm all 1.25inch (31.7mm) shaft diameter Smartphone-holder for taking pictures Carry bag for field-tripod Manual

With the BRESSER Smart Home Weather Station 4CAST SG, you'll stay ahead of the weather whilst keeping your home perfectly comfortable. This clever device shows precise weather data on its display as well as your mobile and makes your smart home that much more intelligent. And with its comprehensive 5-day weather forecast, you'll never be caught out by unexpected weather again. Elegant weather console with all the essentials Planning a sunny weekend or wondering if you'll need that umbrella? The crystal-clear display on your WiFi weather station gives you everything you need for effortless planning. The dependable graphical 5-day weather forecast keeps you informed with predictions for daily highs and lows plus UV index readings. Accurate readings of outdoor temperature and humidity let you know whether to grab a coat before stepping outside. The built-in thermo-hygrometer also monitors your indoor climate, whilst the comfort indicator instantly tells you when it's time to open a window. Your smart home gets weather-aware - powered by the Tuya app This app-connected weather station transforms your home into a smart environment that responds to temperature and humidity changes. Through the Tuya Smart Life app, you'll control not just your weather station, but once integrated into your smart home system, you can make other Tuya-compatible devices respond automatically to weather conditions. Temperature dropping? Your heating switches on by itself. Humidity climbing? The dehumidifier starts up without you lifting a finger. Your smart home weather station provides the precise data foundation for your ideal living environment. Sophisticated tracking for weather watchers Curious about weather patterns? The recording of maximum and minimum temperature and humidity readings turns you into a proper weather expert in no time. The personalised temperature alert function notifies you when your custom app settings are triggered. Plus, detailed historical charts on your mobile let you analyse long-term weather trends with ease. Bring home your intelligent weather companion today with the BRESSER Smart Home Weather Station 4CAST SG! FEATURES BASE STATION WiFi weather station for Tuya smart homes to control other IoT devices 5-day weather forecast with daily highs and lows & UV index Monitors indoor temperature and humidity Indoor climate comfort indicator Displays outdoor temperature and humidity Records max/min temperature & humidity values Temperature alerts for indoor and outdoor conditions Alarm clock with snooze function - easily set through the app Temperature and humidity trend charts accessible via app Supports up to 3 wireless sensors (1 sensor included) Power: Mains adapter, CR2032 backup battery (included) FEATURES SENSORMeasures temperature and humidity Easy-to-read display Range: up to 80 metres Battery powered: 2 x AAA/LR03 batteries (included) SCOPE OF DELIVERY Base station Wireless thermo-hygrometer sensor Mains adapter 1 x CR2032 battery 2 x AAA/LR03 batteries Instruction manual

NOTE: This base station is compatible with BRESSER weather stations with item no. 7003300 AND LOT no. 1605517 and higher. You will find the item number and LOT number of your weather station printed on the back of the base station.Want to share your weather data with your immediate neighbours? Or do you need a replacement base station because your device didn’t survive the last house move or a wild game of tag with the kids? Whether as an extension or a spare part – get all the functions of your existing weather station with item number 7002530 back on screen in no time with this base station. FEATURES7.4-inch colour display for detailed time and weather information LC display contrast adjustment for different viewing angles Wi-Fi connection for publishing data on weather platforms such as AWEKAS, Weather Underground and Weathercloud Indoor temperature (°C/°F) and humidity with comfort indicator Display of outdoor temperature (°C/°F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (min.) Wind speed display (gusts or average speed) Beaufort scale level (scale for classifying wind speed) Wind direction display (current and prevailing, based on 16 directions) Rainfall display (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Feels-like outdoor temperature Weather index for dew point, wind chill factor and heat index Min./max. value memory (up to 24 hours) High/low value alarm with flashing symbol on the display Alarm clock with ice/frost warning Time (internet time synchronisation), date, weekday and moon phase Sunrise and sunset Weather data calibration 3 display brightness levels: High / Low / Off 7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU) Supports firmware updates Security type: supports WPA3 encryption Supports one 7-in-1 wireless professional sensor Supports up to 7 additional wireless sensors (7009999, SP60010000000, SM60020000000) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: mains adapter (included) and 3x AAA backup batteries (not included) Mounting: wall-mounted or stand SCOPE OF DELIVERY Base station No outdoor sensor included! Instruction manual

Stay on top of the weather with the BRESSER 6-day 4CAST PRO SF 7-in-1 Wi-Fi weather Station with a solar-powered sensor! The weather station displays a 6-day weather forecast with maximum/minimum temperature readings, and also tells you the chance of rain. It also features a 10-inch colour display, which ensures that all the weather stats are easy to read. The modern Wi-Fi weather station with a solar-powered sensor obtains the forecast data via the Internet from the ProWeatherLive platform. In addition to the weather forecast, the weather station also displays the local visibility and cloud cover. Eco-friendly weather station with solar-powered sensor, ideal for amateur meteorologists The weather station comes with a solar-powered outdoor sensor, which is powered by solar energy and measures temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. Simply align the large solar panel with the sun according to your location. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries (not included) as a back-up during installation, and they will take care of the power supply. All the measurements will appear on the screen of the base station, which can be located up to 150 metres away. Wi-Fi weather station with feature-packed base station The base station of the 6-day 4CAST PRO SF weather station features a stylish design and displays the data received from the solar-powered sensor. It also takes its own readings via the built-in thermo/hygro sensor, which measures the ambient indoor temperature, humidity and air pressure. Together with the maximum/minimum memory, this enables you to keep an eye on the indoor climate and effectively prevent mildew and excessively dry air. Outdoor temperature, precipitation and more – you can also view the maximum/minimum readings for the other measurements made by the solar-powered sensor. Share weather data and use it with your smart home Access the measurements from your solar-powered sensor remotely and share them with others: with a few clicks, you can send your weather station data to the ProWeatherLive platform. If you have a smart home, you can also make use of the German-language portal AWEKAS, which allows you to transfer measurement data from the solar-powered sensor to your smart home system free of charge. Simply follow the link below to set up the weather station for your smart home system: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Never lose track of time In addition to its elegant, contemporary design, the 4CAST PRO SF Wi-Fi weather station allows you to keep track of the time, date, day of the week and moon phase via the large display. For people who enjoy watching the sunset or observing the moon, the weather station also displays the sunrise/moonrise and sunset/moonset times.  Solar-powered weather data: Stay informed of the weather with the BRESSER 6-day 4CAST PRO SF 7-in-1 Wi-Fi weather station with a solar-powered sensor! BASE STATION FEATURES 6-day weather forecast (today and 5 following days) Large 10” colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 219 x 200 x 26 mm FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual