BRESSER Professional Rain Gauge

For all ambitious amateur gardeners and meteorologists who are not satisfied with average values of the weather services, the digital wireless rain gauge from BRESSER offers the possibility of your own professional precipitation measurements. The BRESSER Profiessional rain gauge shows the detailed rain measurement values in millimetres, and also the indoor and outdoor temperature is displayed precisely. The rain gauge has a radio distance of 150m outdoors. The radio range is achieved by the 868 Megahertz radio signal. The base station can determine temperature and humidity and can also show the rain readings hourly, daily, weekly, monthly or annualy. It is equipped with a graphical histogram. FEATURES Precipitation measurement DCF radio clock reception and display Wake-up call with snooze function (Snooze) Outdoor temperature alarm (frost warning) Outdoor temperature (in °C or °F) Indoor temperature (in °C or °F) Humidity inside Bar chart SINCE-function for displaying the total precipitation from a certain point in time Lowest and highest value display Max-/Min-values storage Backlight Battery operated (Station: 2x AA; Sensor: 4x AA - not included!) SCOPE OF DELIVERY Rain gauge Base station Detachable stand Installation material Operation manual

The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included! The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated. A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol. Furthermore, the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the ''moonstruckers'' also the different phases of the moon are shown. An alarm function with snooze mode is also integrated. FEATURES 5-in-1 outdoor multi sensor Inside temperature (°C/°F) and humidity Outside temperature (°C/°F) and humidity Wind direction and speed Graphical weather trend display (12 hours) Beaufort index (scale for the classification for wind speeds) Precipitation rate with history (day/week/month) Air pressure with history (24 hours) Heat index Dew point Radio controlled time and date setting Phases of the moon Alarm function Ice/frost warning Min/Max memory (up tp 24 hours) LED background light, amber SCOPE OF DELIVERY Base station with stand 5-in-1 Multisensor with mounting material Manual Additionally, 6 AA batteries are required (not included) PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging: Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802520. Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.

The BRESSER Beaufort 5-in-1 Weather Station has everything you need to stay on top of the weather. The weather station also has a large colour display with an intuitive, easy-to-read layout. Thanks to the elegant design, the device blends in perfectly in any home - from a country house to minimalist decor. The outdoor temperature and humidity readings from the 5-in-1 outdoor sensor are supplemented by the integrated thermal/hygro sensor on the base station, which provides precise data on indoor temperature, humidity and air pressure. And so that you always know which way the wind is blowing from - as well as how much it's rained - the weather station also features an anemometer and a rain gauge. Practical features and useful weather data Featuring an outdoor sensor, the weather station offers numerous features to keep you meteorologically informed throughout the day. For example, the graphic weather forecast will show you what kind of weather you can expect over the next 12 hours. Meanwhile, the perceived ('feels like') temperature factors in the impact of wind and humidity on the outdoor temperature, and helps you to choose the right clothes. In addition to the dew point, wind chill and heat index, the weather station also shows you the wind speed using the Beaufort index so that you always know how strong the wind is blowing. However, it's not just the outdoor conditions that are important. The weather station also features a graphic indoor climate indicator, which uses a smiley to show you whether the indoor temperature and humidity are at an optimal level. If your struggle with mildew or dry air, you can set a maximum and minimum value alarm that informs you when the preset limits have been reached. This alarm can also be set for the other measured values. If you're a keen meteorologist or gardener and want to follow recent trends in weather, the weather station also features a historical bar chart for precipitation and air pressure, as well as a min/max value memory. Radio-controlled clock with built-in alarm In addition to extensive meteorological data, the weather station also features a radio-controlled clock that sets the time automatically. After it has been connected to the power supply, the base station automatically searches for the corresponding radio signal. A few minutes later, the time, date and day of the week will appear on the display, together with the current moon phase. (PLEASE SET HOUR OFFSET TO -1 IN THE TIME SETTING MENU IF IN THE UK, IRELAND OR PORTUGAL TO RECEIVE THE CORRECT TIME FOR THESE AREAS). The weather station is ideal for bedrooms: the built-in light sensor automatically adjusts the display brightness to the surroundings so that your sleep is not disturbed. There is also a built-in alarm clock with a snooze function. During the winter, the ice/forst alarm activates the alarm 30 minutes earlier when the temperature is below -3 °C. View the time and weather on a colour display with the BRESSER Beaufort 5-in-1 Weather Station. BASE STATION FEATURES Receives weather data from the 5-in-1 external sensor Large colour display and elegant design Graphical weather trend (12 hours) Measures the indoor temperature (°C/°F), humidity and air pressure Displays the outdoor temperature (°C/ °F) and humidity Displays the wind speed and wind direction Beaufort scale display (scale for measuring wind speed) Precipitation display with history (day/week/month) Historical bar graph display for precipitation (last 5 days) and change in air pressure (last 1, 3, 6,12 and 24 hours) Indoor climate indicator Maximum and minimum value alarm Min./max. memory (up to 24 hours) Weather index display: Feels like (perceived temperature), dew point, wind chill factor, heat index Radio-controlled time and date settings Moon phase display Alarm function with snooze button and ice warning function 5 languages for day of the week display (EN, DE, FR, ES, IT) Ambient light sensor for automatic dimming of the LED backlight Power supply: Power adapter, CR2032 back-up battery (not included) Dimensions: 182 x 118 x 20 mm / Weight: 225 g OUTDOOR SENSOR FEATURES Measures the temperature, humidity, wind speed, wind direction and precipitation Transmission range: up to 150 m Battery operated: 3x AA (not included) Dimensions: 343.5 x 393.5 x 136 mm DELIVERY CONTENT Base station Multi-sensor with mounting materials Power adapter Instruction manual

The wind gauge from BRESSER is a professional anemometer for your home garden. You can read the current wind speed from the base station as well as average and maximum values per hour, day, month or year can also be displayed. A wind speed alarm can also be set. The 3-in-1 outdoor sensor determines not only wind speed but also outdoor temperature and humidity. The determined values are transmitted to the base station by radio over a maximum range of 150 m. The base station also has integrated sensors for measuring room temperature and humidity. BASE STATION Displays time (12h/24h), date and day of week Automatic time setting via DCF radio signal Wake-up function Graphical weather forecast for 24 h Integrated sensors for measuring humidity (%) and temperature (C°/F°) Displays felt temperature, wind chill, dew point and heat index Frost warning Wind speed alarm History data memory Backlight (orange) Adjustable display contrast Detachable stand and suspension device Battery powered: 2x AA batteries (not included!) WIND GAUGE Wind sensor for measuring wind speed (mph, m/s, km/h, knots) Integrated sensors for measuring humidity (%) and temperature (C°/F°) Transmission of measurement data to base station via radio (frequency: 868 MHz) Transmission range: up to 150 m Battery powered: 3x AA batteries (not included!) SCOPE OF DELIVERY Base station Removable stand Wind gauge Mounting material Instruction manual

What is the weather doing? The BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station will show you everything that you need to answer this question. The dynamic 17.8 cm (7-inch) HD TFT colour screen displays the measurements from the two included sensors in a range of different display modes. With a simple button press, you can view the weather data that you need: the home screen with the basic data and a reliable weather forecast, the detailed view with more data including maximum and minimum values and trends, or the overview screen with the temperature and air pressure. And for passionate weather enthusiasts, the Wi-Fi weather station can also display historical data. The data protocol delivers detailed measurements at intervals of 5, 10 or 30 minutes – all of which can be exported via USB for further analysis on your PC. All max/min values for the past day can also be displayed on the Wi-Fi weather station with a simple button press. You can also view a history graph to analyse the recent trends in the weather. Solar weather station with 7-in-1 sensor and thermo-hygro wireless sensor The MeteoChamp Weather Station comes with two feature-packed outdoor sensors: one 7-in-1 sensor and one wireless thermo-hygro sensor.The 7-in-1 wireless sensor reliably measures the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. And what’s more, this multi-sensor with a large solar panel is powered by solar power. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. The thermo-hygro wireless sensor is responsible for indoors. Because the climate there influences our well-being just as much as it does outside. That's why in addition to the built-in hygro-thermo sensor inside the base station this wireless thermo-hygro sensor measures the indoor temperature and humidity in an additional room. This way you can check in a flash whether the air in the bathroom is dry enough or the temperature in the children's room is pleasant - and give mould as well as excessively dry air no chance. Perfectly networked – share measurements from your Wi-Fi weather station In the age of the Internet, we want to be able to access our local weather data remotely and share it with others. The solar weather station comes with a Wi-Fi function that allows you to do just that – on up to 3 weather platforms. The Wi-Fi weather station features native support for the popular weather services ProWeatherLive, Weather Underground and Weathercloud, which can be configured in a few simple steps. If you prefer to use another platform such as the German-language portal AWEKAS, you can also connect your weather station to your desired provider. And if you have a smart home, the Wi-Fi weather station can be connected directly to your smart home system with our partner AWEKAS. For more information, visit the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ The weather station also has another smart feature to ensure that you have plenty of time to get ready on frosty mornings: an ice/frost alarm. This makes the built-in alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The solar weather station also has an individually configurable weather alarm, which notifies you when the wind speed, rainfall or other readings exceed or drop below your preset limits. Keep track of the weather with the comprehensive measurements and display options on the BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station. BASE STATION FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Displays precise measurement data from the 7-in-1 outdoor sensor (Outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity) Displays precise measurement data from the thermo-hygro sensor (temperature and humidity) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 5 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) Dimensions: 192 x 22 x 140 mm / Weight: 380 g FEATURES OF 7-IN-1 SOLAR-POWERED OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Range: Up to 150 m Dimensions: 410 x 170 x 225 mm / Weight: 533 g THERMO-HYGRO SENSOR FEATURES Measures the temperature and humidity Range: up to 150 m Power supply: 2x AA batteries (not included) Dimensions: 61 x 113 x 39.5 mm SCOPE OF DELIVERY 1x Base station 1x Solar-powered outdoor sensor 1x Wireless thermo-hygro sensor Power adapter Instruction manual

Falling under the car when moving, taking a knock from a child's football, simply slipping from your hand during installation - even the most robust 7-in-1 wireless sensor is not immune to everyday misadventure. But, even if your outdoor sensor is permanently damaged beyond repair, there's no need to buy a whole new weather station simply to keep an eye on the weather. Your base station can continue to function perfectly. This sensor is the perfect replacement part for your 4-day 4CAST WiFi weather centre. The device is operated in much the same way as you are used to: Start by inserting the batteries (not included). Then, fit the replacement sensor in your preferred location using the installation material supplied. Once everything has been tightened up, all you need to do is connect to your base station (not included). With a replacement sensor, this is not an automatic process; you will needed to press the WiFi/SENSOR button on the console. The console will then start to search for the signal from the sensor. Connected? Then you're done, and you can start enjoying up-to-date and local weather data from your sensor for outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level and light intensity. Rehabilitate your 4-day 4CAST WiFi weather centre with the replacement sensor. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm DELIVERY CONTENT Wireless sensor with installation material Base station not included! Instruction manual

Has your 5-in-1 external sensor for your BRESSER WiFi colour weather centre succumbed to the impact of your child’s football or your last house move? Then it’s time for a replacement. And you don’t need to buy the whole product! This 5-in-1 external sensor is the perfect replacement part for your weather centre. It takes no time to install: Establish the power supply, take the mounting materials from the packaging and fit the wireless sensor at your preferred spot as normal. The existing base station will connect to the replacement external sensor automatically as normal. And if the two devices can’t find one another? You can manually intervene: Simply press the WiFi/SENSOR button on the base station and it will start to search for the new wireless sensor. Once connected, the local measured values for wind speed, wind direction, humidity, temperature and precipitation will be transmitted via 868 MHz to your colour display. Good prospects again: Get the full functionality from your WiFi colour weather sensor again with the 5-in-1 external sensor.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. For all units with a lower LOT number, you need the sensor with item number 7802510. You can check the LOT number on your unit as well as on the packaging. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual