BRESSER MyTime Jumbo LCD Weather Wall Clock
Digital wall clock and weather station in one with particularly large numbers
- Jumbo display 330 x 185mm
- DCF time signal and manual time setting
- Indoor and outdoor temperature
- 12-24 hours weather forecast
- Indoor and outdoor humidity
Product number:
7001800MGU000
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER MyTime Jumbo LCD Weather Wall Clock"
The BRESSER MyTime Jumbo LCD weather wall clock is the ideal weather wall clock for the office or other large rooms. With its 9 cm high numbers the time can easily be read even from a greater distance and from almost any position in the room.
The setting of the time as well as the change to daylight saving time is done automatically via the DCF time signal (CET). Apart from that with the weather wall clock you can also always keep an eye on the temperature and humidity and you even get a weather forecast for the following 12 to 24 hours.
PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, it also offers manual time setting in case it is used in a different time zone.
FEATURES
SCOPE OF DELIVERY
REQUIRED BATTERIES
The setting of the time as well as the change to daylight saving time is done automatically via the DCF time signal (CET). Apart from that with the weather wall clock you can also always keep an eye on the temperature and humidity and you even get a weather forecast for the following 12 to 24 hours.
PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, it also offers manual time setting in case it is used in a different time zone.
FEATURES
- Jumbo display 330 x 185mm
- Radio controlled clock (automatic setting of time and clock change)
- Alarm
- Indoor and outdoor temperature
- Indoor and outdoor humidity
- 12-24 hours weather forecast
- Includes wall mounting and fold-out stand
SCOPE OF DELIVERY
- 1x weather wall clock
- 1x outdoor sensor
- 1x manual
REQUIRED BATTERIES
- Station: 4x AA
- Sensor: 2x AAA
| 2) Footnote: | not included with your purchase |
|---|---|
| Batteries included: | false |
| Batteries required: | true |
| Body material: | Plastic |
| Colour: | black |
| Display height (cm): | 18.5 |
| Display size (diagonal in cm): | 37.7 |
| Display width (cm): | 33 |
| Extended warranty (years): | 5 |
| Features: | Alarm clock function, Weather forecast |
| Field of application [Electronics]: | Household, Humidity measurement, Living, Temperature measurement, Time display |
| Frame material: | Plastic |
| Height of the largest digit on the display (cm): | 8.9 |
| Material: | Plastic |
| Measurement function: | Humidity (inside), Humidity (outside), Inside temperature, Outside temperature |
| Net Weight total (incl. accessories) (g): | 956 |
| Net Weight total (incl. accessories) (in kg): | 0.956 |
| Net weight (without access.) (g): | 847 |
| Power supply 1): | 1.5V Batteries |
| Power supply unit included: | false |
| Product Family [Electronics]: | MyTime |
| Product series: | MyTime |
| Sensor height (mm): | 20 |
| Sensor length (mm): | 100 |
| Sensor weight (g): | 42 |
| Sensor width (mm): | 43 |
| Sleeptimer: | false |
| Total height (mm): | 30 |
| Total length (mm): | 368 |
| Total width (mm): | 230 |
| Transmission frequency (MHz): | 433 |
| Transmission range (m): | 50 |
| Typ [Batteries]: | AA |
| Type [Watches]: | Wall clock |
| Type of mounting: | Stand, Wall bracket |
| Water-repellent: | false |
| Waterproof 8): | false |
Skip product gallery
Accessories
BRESSER Thermo-Hygro Sensor 433 MHz
€24.95*
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
This device is compatible with weather stations with the following article numbers:
14895
14993
14998
15004
15131
15243
15298
15405
15406
15407
15408
15409
15418
15479
15496
15652
16206
16207
7000012CM3000
7000012GYE000
7000013
7000023
7000027
7000029
7000030
7000060
7004200
7004200GYE000
7004200HZI000
7004200MGU000
7004200QT5000
7004210
7004330
7004340
7004350
7004360
7004370
7004380
7006500
7006510
7006511
7007201
7007350
7007402
7007403
7007404
7007511
7007520
7007610
7007620
9070600
9070700
9070710
9604101
9604200
9604210
7000012000000
7004200000000
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44Frequency: 433 MHz
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
Skip product gallery
Customers also bought
BRESSER Thermo-Hygro Sensor 433 MHz
€24.95*
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
This device is compatible with weather stations with the following article numbers:
14895
14993
14998
15004
15131
15243
15298
15405
15406
15407
15408
15409
15418
15479
15496
15652
16206
16207
7000012CM3000
7000012GYE000
7000013
7000023
7000027
7000029
7000030
7000060
7004200
7004200GYE000
7004200HZI000
7004200MGU000
7004200QT5000
7004210
7004330
7004340
7004350
7004360
7004370
7004380
7006500
7006510
7006511
7007201
7007350
7007402
7007403
7007404
7007511
7007520
7007610
7007620
9070600
9070700
9070710
9604101
9604200
9604210
7000012000000
7004200000000
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44Frequency: 433 MHz
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
Skip product gallery
Customers also viewed
BRESSER MyTime Jumbo LCD Weather Wall Clock
€129.00*
The BRESSER MyTime Jumbo LCD weather wall clock is the ideal weather wall clock for the office or other large rooms. With its 9 cm high numbers the time can easily be read even from a greater distance and from almost any position in the room. The setting of the time as well as the change to daylight saving time is done automatically via the DCF time signal (CET). Apart from that with the weather wall clock you can also always keep an eye on the temperature and humidity and you even get a weather forecast for the following 12 to 24 hours.
PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, it also offers manual time setting in case it is used in a different time zone.FEATURESJumbo display 330 x 185mmRadio controlled clock (automatic setting of time and clock change) AlarmIndoor and outdoor temperature Indoor and outdoor humidity12-24 hours weather forecast Includes wall mounting and fold-out standSCOPE OF DELIVERY1x weather wall clock1x outdoor sensor1x manualREQUIRED BATTERIESStation: 4x AASensor: 2x AAA