BRESSER Microscope Camera MikroCam MINI Full HD HDMI with Full HD MINI HDMI Display (13.3")
Practical set consisting of microscope, microscope camera and display
- Practical set consisting of microscope, microscope camera and display
- Affordable HDMI camera e.g. for presentations or teaching
- Sony IMX307 1/2.8" sensor with Full HD resolution (1920 x 1080)
- C-Mount connection thread, also compatible with reduction optics
- 13.3" (33.8 cm) HDMI monitor, active area: 16.5 x 29.4 cm
- "IPS Full View" technology with 178° viewing angle
- Native 16:9 Full HD resolution (1920 x 1080)
Product number:
5690172
Product information "BRESSER Microscope Camera MikroCam MINI Full HD HDMI with Full HD MINI HDMI Display (13.3")"
Practical set consisting of the MikroCam Mini HDMI and a 13.3" monitor that can be mounted directly on the camera. It is ideal for presentations and documentation. The camera has a C-Mount connection. Therefore, an adapter may be required.
The Microscope Camera in Detail
The MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).
The HDMI connection is easy to make and the camera is ready to use immediately. No software installation, PC setup, etc. is necessary. Thanks to the lossless data transmission, very good image quality is achieved and the image always has a consistently high frame rate of 60 fps and is delay-free. This is particularly advantageous when a microscope workstation is to be digitised, for example in quality control or manufacturing.
The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled.
*To take measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720).
The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.
Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only used to control the camera with the mouse.
MICROSCOPE CAMERA FEATURES
The Display in Detail
The Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMI
The display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.
The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display delivers optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.
The image from the microscope camera is displayed on the HDMI screen always delay-free and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.
Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are unpleasant for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.
The display can be powered with the supplied Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workstation is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.
DISPLAY FEATURES
DISPLAY SCOPE OF DELIVERY
The Microscope Camera in Detail
The MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).
The HDMI connection is easy to make and the camera is ready to use immediately. No software installation, PC setup, etc. is necessary. Thanks to the lossless data transmission, very good image quality is achieved and the image always has a consistently high frame rate of 60 fps and is delay-free. This is particularly advantageous when a microscope workstation is to be digitised, for example in quality control or manufacturing.
The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled.
*To take measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720).
The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.
Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only used to control the camera with the mouse.
MICROSCOPE CAMERA FEATURES
- HDMI connection for direct connection to a monitor, TV, projector or smartboard
- C-Mount thread for easy adaptability to various microscopes (manufacturer-independent)
- Compatible with USB sticks or SD card readers (max. storage size: 512 GB)
- No PC/laptop necessary
- MikroCam MINI Full HD HDMI with C-Mount connection
- Power supply (12 V / 2A)
- USB mouse
- HDMI cable (approx. 1.5 m)
The Display in Detail
The Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMI
The display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.
The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display delivers optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.
The image from the microscope camera is displayed on the HDMI screen always delay-free and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.
Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are unpleasant for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.
The display can be powered with the supplied Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workstation is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.
DISPLAY FEATURES
- 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels
- Active area: 16.5 x 29.4 cm
- Easy mounting directly on a MikroCam PRO or MINI
- Wide viewing angle (178°)
- No separate power supply necessary
DISPLAY SCOPE OF DELIVERY
- 13.3" display
- HDMI cable
- Y-cable for power supply via camera power supply
- Mounting screws (2 pieces)
- Allen key
- Operating instructions
| Active area: | 5.57 x 3.13 mm |
|---|---|
| Body material: | Aluminium, Aluminium/plastic |
| Colour: | blue |
| Data transmission: | HDMI |
| Field of application [Microscopes]: | Biology, Education, Laboratory, Nondestructive testing |
| Frame rate: | 60 fps |
| Image File Formats: | jpg |
| Interfaces: | HDMI, SD, USB, USB-C |
| Material: | Aluminium, Plastic |
| Mounting option: | C-Mount, Tripod Thread |
| Navigation: | Mouse |
| Net Weight total (incl. accessories) (g): | 1005 |
| Pixel size (µm): | 2,9 x 2,9 |
| Power supply 1): | 12V Mains adapter |
| Power supply unit included: | true |
| Removable storage 2): | SD, SDHC (= 64 GB) |
| Resolution: | 1920 x 1080 |
| Sensor type: | CMOS |
| Target Group [Microscopes]: | Advanced Amateurs, Beginners, Experts, Professional users, Science and Research |
| Total height (mm): | 60 |
| Total length (mm): | 306 |
| Total width (mm): | 183 |
| Video Formats: | MP4 (Codec: H.264) |