BRESSER Messier EXOS-2 EQ GoTo Mount

Mount, tripod & handbox with computer

  • Equatorial GoTo-Mount with stainless steel tripod
  • Maximum payload: up to 13 kg
  • For easy finding and guiding the deep sky objects
  • Ideal for astrophotography because of an ST-4 compatible autoguider port
  • Included: Mount with tripod, Startracker handbox controller, 1x4.5 kg counterweight, manual, battery pack
  • Startracker handbox DE/GB/FR/ES/IT

€899.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Privacy
Product number: 4964350
GTIN/EAN: 4007922007786
WEEE-Reg.-Nr.: DE 34716369

Die BRESSER EXOS 2 Goto Montierung

von Jochen Fehmer


Mein neustes Testobjekt ist die BRESSER EXOS 2 Goto Montierung. Nun ja, in der Astronomie- Szene ist sie nicht gerade als die Montierung schlechthin bekannt und die Meinungen gehen weit auseinander.

Also ab ins Lager und eine BRESSER EXOS 2 Goto auf die Sackkarre und ins Auto damit. Mir fiel auf, die Dimensionen des Kartons sind echt übersichtlich, kein langer schwerer wie ich es von anderen Montierungen gewohnt bin. Es sei gesagt, es war keine überprüfte oder eine ausgesuchte, es war eine von der Stange oder besser gesagt vom Regal.

Zuhause angekommen und gestärkt von einem Abendessen machte ich mich ans Werk.

BRESSER EXOS 2 GOTO mit EXPLORE SCIENTIFIC AR102
BRESSER Montierung EXOS 2 GOTO

Ich packte die Montierung im warmen Wintergarten aus, denn draußen war es schon sehr kalt, minus 4 Grad. Als erstes das Stativ. Es ist aus Stahlrohr, leicht und mit zwei Feststellschrauben pro Fuß…das finde ich schon einmal gut. Trotz des leichten Gewichts scheint es sehr stabil zu sein. Dann kam der Montierungskopf; die Motorenabdeckungen sind aus Kunststoff. Egal, wenigstens sind die Zahnräder und die Kugellager einigermaßen vor Staub und Feuchtigkeit geschützt. Auch da fiel mir auf, dass die Montierung sehr leicht ist. Die Montierung auf das Stativ zu schrauben ist sehr einfach, eine große Drehstange erleichtert das ungemein. Gute Idee,wenn es draußen nicht gerade warm ist. Dann die Gewindestange an die Montierung geschraubt. Ein Gewicht ist im Lieferumfang enthalten, dass auf die Stange geschoben und fest gezogen. Handbox angeschlossen und das DEC. Kabel installiert. Fertig. Die BRESSER EXOS 2 GOTO Montierung macht so einen guten Eindruck, alle Schrauben sind groß genug um auch mit Handschuhen bei niedrigen Temperaturen arbeiten zu können. Allein vom Aussehen gefällt sie mir sehr gut.

Aber, gut aussehen reicht nicht. Leider suchte ich vergeblich nach einer Polsucherbeleuchtung. Diese muss als Zubehör gekauft werden. Dafür bekommt sie keinen Applaus. Es geht zwar auch ohne, aber mit der genauen Einordnung fällt und steht die Beobachtungsnacht. Schade.

Ich habe das mitgelieferte Batteriefach mit Batterien gefüllt. Ich wollte so damit arbeiten wie sie ausgeliefert wird. Ein Netzteil kann man als Zubehör erwerben.

Auf geht’s, Montierung angestellt. Als erstes fiel mir das sehr große Display der Handbox auf. Sehr angenehm die Infos zu lesen. Keine Laufschrift sondern stehende Buchstaben. Die Umstellung auf unsere deutsche Sprache ist kein Problem. Nur dass die Schrift auf einmal viel größer wurde….warum dieses? Keine Ahnung, eventuell sind viele Deutsche kurzsichtig. Die Zeit und das Datum musste ich nicht mehr eingeben, bei Bresser werden die Montierungen mit dem Goto versehen, so dass alles schon eingegeben wurde. Auch hier ist zu beachten wenn es eingegeben werden muss, erst das Jahr, Monat und dann den Tag. Nun zum Standort: Vorgegeben sind etliche Länder und Städte. Da es aber keine Updates mehr gibt kann man eigentlich sofort damit beginnen seinen eigenen Wohnort einzugeben. Dafür einmal nach unten mit den Pfeiltasten.

Der Star Tracker der EXOS 2, die Schaltzentrale der Montierung
Die Zahnräder hinter der Abdeckung

Längen,- und Breitengrad eingeben. ( Wenn man den nicht weiß einfach im Internet oder Handy gucken ), Zeitzone hier in Deutschland ist 01. Wenn alles eingegeben ist bestätigen und das ist erledigt. Jedes Mal wenn man nun die Montierung ein schaltet nur noch auf Benutzerstandort gehen und fertig. (interne Batterie). Ich hatte für die erste gemeinsame Nacht mir folgendes vorgenommen.

Doppelschiene und 200 mm Canon Objektiv mit einer Canon EOS 6 D und 8x50 Sucher mit einer ASI ZWO 120 Guiding mit PHD2. Normalerweise sollte man die Montierung in DEC. und RA. auf vorgegebenen Pfeile stellen, dieses wollte ich aber nicht. Ging ja auch nicht, da ich mit einer Doppelschiene arbeiten wollte. Also ausgerichtet und angeschaltet. Ich wollte eine 3 Sterne Ausrichtung machen. Machte ich dann auch, einfach der Sternvorschläge ohne Widerworte folgen. (Wie in einer guten Ehe, keine Widerworte) Drei Sterne durch und fertig. Ich habe keine Ahnung ob das richtig war, schließlich war ich noch im warmen Wintergarten.

Zum Schluss sollte sie auf Home Position fahren, das tat sie auch mit der Querstellung meiner Ausrüstung. Natürlich habe ich vorher das Gewicht der Kamera, Objektiv etc. genau ausgependelt. Das ist sehr wichtig, die Gewichtsverteilung sollte schon passen. Dann ging es raus in die Dunkelheit und in die Kälte.

Die BRESSER EXOS 2 Goto Montierung grob nach Norden ausgerichtet. Nun die Montierung mittels Dosenlibelle auf dem Stativ in Waage gebracht. Dann den Deckel des Polsuchers abgezogen, den Schraubdeckel entfernt. Da keine Polsucherbeleuchtung dabei war habe ich eine Laptop Lampe genommen. Ist eine kleine LED Leuchte mit Klemme und flexiblen Arm…ist zwar kein Rotlicht, geht aber auch. Es geht auch mit der Hand box! In der Hand box vorne ist ein Rotlicht eingebaut mit verschiedenen Helligkeitsstufen. Ohne Probleme reicht die Länge des Kabels aus um in die Öffnung des Polsuchers zu leuchten. Hab ich ausprobiert, klappt. Bei der BRESSER EXOS 2 GOTO ist in der Mitte ein Strich und dort ein Kreis. Da steht Polaris. Es gibt zahlreiche APPs für das Handy. Unter anderem auch die APP- Polarfinder. Diese benutze ich immer. Automatisch habe ich die Position von Polaris. Bitte positionieren Sie den Polarstern auf den Kreis, nicht in dem Kreis. Sie können sicher sein, es passt. Ohne viel Mühe ist das erledigt.

Großdimensionierter Drehknauf
Der Polsucher der BRESSER EXOS 2

Dann habe ich die Kamera angeschlossen und den Laptop gestartet. Die Scharfstellung ist schon eine heikle Sache. Ich nehme immer den Polarstern. Bis jetzt hat es immer geklappt. Es wäre schade, wenn die ganzen Aufnahmen unscharf oder die Sterne Donuts gleichen, die Zeit sollte man sich nehmen. Zahlt sich später aus. 

M 45

Foto von Jörg Ortmann aus Hamm-Pelkum , 5.12.2016 (M 45 mit der BRESSER EXOS 2 GOTO, 24x300 Sek., ISO 400 , Canon EOS 1000 Da.)

Die BRESSER EXOS 2 Goto Montierung sollte beim ersten einrichten nur zwei Sterne anfahren, erster Stern war fast in der Mitte des Kameradisplays. Okay, ich gebe zu es war ja das Canon 70-200 mm, F4 Objektiv. Da wäre es sehr traurig wenn ich den nicht gesehen hätte, oder? Beim zweiten Stern viel ich aus den Wolken, die Montierung schlug den Polarstern vor. Alles klar! Doch ich zentrierte unsern Nordstern und bestätigte die Auswahl der Montierung. Da war ich mal gespannt. Ich scrollte auf der Handbox auf den Menüpunkt Messier Objekte und tippte die Zahlen 4 und 5 ein. Die Plejaden sollten es werden, das erste Objekt welches jemals die Montierung angefahren hat…..ein Stück Geschichte. Auf ging’s, sehr langsam und ruhig fuhr die BRESSER EXOS 2 Goto den Himmel ab. Das Motorengeräusch ist ruhig, es wird keinen Ärger mit Nachbarn geben. Und dann war meine Überraschung sehr groß, mittig strahlten die sieben Schwestern im Display der Canon 6D Kamera. Der Adler ist gelandet! Oha, das ist doch mal was, innerliche Freude machte sich breit. Doch wie wird es weitergehen? Also, M 31 die Andromeda Galaxie….ist ja nicht weit weg, 31 in dem Menüpunkt Messier Objekte eingetippt und bestätigt. Und siehe da, M 31 in der Mitte. Dann wurde ich übermütig, Deneb im Sternmenü eingegeben, Mittig. Vega eingegeben, wieder mittig. Warum fragte ich mich, denn innerlich hatte ich mich auf Frust eingestellt. Okay, sie wollte es wissen. Ab zu den Plejaden. Eine Minute Belichtung ohne Guiding. Ergebnis: Punktförmige Sterne. 120 Sekunden eingegeben und Belichtung gestartet.

Kurz in die Küche gegangen und einen Kaffee geholt. Da hatten die Sterne leichte Tropfen. Aber gut. Jetzt wollte ich mal loslegen mit der Fotografie. Ich benutzte ein 9x50 Sucher mit einer ZWO ASI 120. APT auf meinem Laptop unterstützt die Astrofotografie. Im Display von APT stellte ich M 45 nochmal richtig scharf, durch die Zoom Funktion eine tolle Sache.

Leider merkte ich die Himmelqualität lies langsam aber sicher nach. Feuchtigkeit machte sich breit und das Seeing wurde von spitze zu überhaupt nicht mehr spitze! Aber egal, es gab aber noch ein paar Einstellungen die ich machen sollte und zwar die Guiding Geschwindigkeit bei der BRESSER EXOS 2 Goto auf 0,500 ändern. Bei PHD habe ich die Kalibrierungsschritte auf 1000 reduziert. Das waren nur grobe Änderungen, ein Feintuning wird es erst bei den nächsten Tests geben. Nun habe ich die BRESSER EXOS 2 Goto mit meinem Laptop verbunden. Ich habe mir einen passenden Stern ausgesucht und die beiden Sachen sich einrichten lassen. Fertig. Die Ausschläge der Korrektur hielten sich in Grenzen. Also gut, dachte ich und wechselte in mein Belichtungsprogram. Ich stellte ISO 400 ein, 180 Sekunden Belichtungszeit und insgesamt sollten 30 Aufnahmen gemacht werden, also 2 Stunden. Ich startete die Aufnahmen. Ich war gespannt, denn man kann live die Korrekturen des Guiders sehen. 0,30 -0,85, in dem Bereich lagen die Zahlen. Das ist jetzt echt völlig in Ordnung, obwohl ich von anderen Montierungen ganz andere Zahlen gewohnt war.

M31

M31, die Andromeda Galaxie. Aufgenommen mit einer Canon EOS 6 D und der BRESSER EXOS 2 GOTO Montierung. ISO 400/30x120 Sek.

Dann war das erste Foto fertig. Ich vergrößerte es auf dem Laptop, und man staune, die Sterne waren Punkte. Dann wurde es Zeit sich ein wenig aufzuwärmen und ich ging ins Haus. (Rentner Astrofotografie, bin halt über 50!) Nach knapp 2 Stunden ging ich raus in die dunkle, kalte Nacht um die Aufnahmen etc. zu kontrollieren. Alles noch in Ordnung. Die Schuhsohlenwärmer aus dem Baumarkt hielten das Objektiv und den Sucher Tau,- und Eisfrei. Ich entschied mich nun mit dem Sigma 120-400 mm mit F5,6 auf die Andromeda Galaxie zu schwenken. Objektiv gewechselt und dann M 31 eingegeben. Unsere Nachbargalaxie war mittig im Display der Kamera.

Anschlussbox

Die Anschlussbox der BRESSER EXOS 2 GOTO Montierung. Von links nach rechts: ST4 für Auto-Guider zum Nachführen von länger belichteten Aufnahmen, Strom, An,-Ausschalter, Hand box und Stecker für DEC.-Achse.

Das Guiding musste ich neu starten, es wollte mit der alten Einstellung nicht mehr. Das dauerte aber nicht lang und die Belichtungen konnten beginnen. Die Tests mit „richtigen“ Teleskopen werden in den nächsten Wochen folgen. Auch diese Belichtungsreihe klappte auf Anhieb. Um drei Uhr rum war es dann auch gut. Die Batterien waren noch nicht am Ende, ich aber. Alles aus stellen, wegstellen und müde ins Bett fallen.

FAZIT DES ERSTEN TESTS MIT DER BRESSER EXOS 2 GOTO

Im Großen und Ganzen bin ich positiv überrascht. Sie hat Ihre erste Testnacht sehr gut überstanden. Sie hat das gemacht was sie sollte und wofür sie entwickelt, gebaut und verkauft wird. Alleine das Piepsen der Hand box nervt ein wenig. Kann man nicht abschalten, wenn es zu viel wird einfach Gewebeband draufkleben. Mit der Hand box muss ich mich noch ein wenig beschäftigen, wie eigentlich mit der ganzen Montierung. Als ein richtiger Test kann man es und sollte man es noch nicht sehen, 200 mm und 400 mm Objektive ist noch keine richtige Herausforderung. Aber, aufgrund ihres geringen Gewichts ist sie sehr mobil. Sollte sie wirklich das Zeug haben als Fotomontierung? Das werden wir in den nächsten Tests sehen. Alleine vom Preis her ist die BRESSER EXOS 2 Montierung schon einmal ein guter Kandidat. Sie liegt preislich zwischen Reisemontierung ( meistens ohne Goto-Funktion) und mittelschweren Montierungen, die für den mobilen Einsatz sehr schwer und unhandlich sind.

Highlights der BRESSER MESSIER EXOS-2 EQ GOTO MONTIERUNG

- Äquatoriale Montierung mit Dreibeinstativ aus Stahlrohr

- Startracker Goto System mit über 100.000 Himmelsobjekten

- Hochwertige Kugellager verbaut, Präzisionsgetriebe in beiden Achsen

- Maximal 13 Kilogramm Zuladung, fotografisch ca.8 Kilogramm

- Gewicht der gesamten Montierung unter 20 Kilogramm

- ST 4 Anschluss zum Auto-Guiding

- Sehr mobil durch geringes Gewicht

- Beleuchtete Hand box mit Rotlichtlampe

Testbericht zu BRESSER Full HD Deep-Sky Kamera & Guider 1.25

von Reinhard Pankrath: "Mond am Taghimmel für Astro - Fotografie geeignet?"

Gefreut hatte ich mich über längere Wolkenlücken und einen offensichtlich durchsichtigen, also klaren, Himmel. Wenn man am Tag den Mond so schön sehen kann, obwohl die Sonne noch scheint, kann der Himmel nicht trübe sein und ist folglich auch für die Verwendung eines Teleskopes gut!

Was mich dann doch geärgert hat, war die fürchterliche Luftbewegung des doch so erwünscht klaren Himmels! Aber jeder Test wird erst richtig gut und aussagekräftig, desto schwieriger er durchzuführen ist. So auch hier.

Meine Erwartung schien realistisch: Wenn der Himmel zwar klar ist, aber die Sonne noch scheint, habe ich weniger Kontrast. Und das brachte mich auf die Idee, eine bestimmte Zusammenstellung meiner Geräte zu testen. Um es vorweg zu sagen: Das Ergebnis hat meine Erwartungen weit übertroffen! Aber hier der Weg dorthin:

Equipment:

• Die Bresser Exos 2 Goto Montierung

• OMC 140 deluxe Teleskop (140 / 2000), ein Rumak

• Die HD – Kamera von Bresser mit dem der neuesten Entwicklung entsprechenden back illuminated Chip von Sony

Warum so?

Erstens: Die Exos 2 ist stabil und läuft gut, habe ich sowieso für meine Teleskope. Die Alternative wäre ein Fotostativ – also ist die Wahl klar :-)

Zweitens: Das OMC wurde von Harrie Rutten berechnet inklusive des überragenden Blendensystems, das für einen optimalen Kontrast sorgt. Das sollte bei Tageslicht doch besonders geeignet sein! Eine bessere Abstimmung kann ich bei anderen Teleskopen auch nicht erwarten.

Drittens: Die HD-Kamera von Bresser hat diesen modernen Chip. Rauscharm und besonders lichtempfindlich durch die derzeit modernste Technik. Kann man bei Sony nachlesen, warum diese Technik so ist. Sehr aufwändig und deshalb auch teurer als herkömmliche Cmos (außer bei Bresser, da hat mich der Preis gewundert, andere lassen es sich besser bezahlen). Aber eben effektiv. Und die Lichtempfindlichkeit der back illuminated Chips sorgt dafür, dass die Belichtungszeiten besonders kurz gehalten werden können. Gerade bei Luftunruhe wichtig, je kürzer belichtet, desto mehr „friert“ die Luftunruhe beim Einzelbild ein. Also siehe oben. Soll die Kamera mal zeigen, was sie kann.

Jetzt muss ich etwas gestehen: Beim ersten Probieren der Kamera habe ich mich über ein gegenüber anderen Programmen komplizierteres Einstellungsmenü geärgert. Da muss man tatsächlich die Bedienungsanleitung lesen! So was! - Nun, ich sage jetzt: Gut, dass es alle diese Parameter gibt. Ein bisschen lernen hat mir auch nicht geschadet und bei diesem Test hat es sich bewährt. Da kam das zugute, was man alles regeln kann.

Das Bild war trotz des Sonnenlichthimmels NICHT flau! Korrekturen am Histogramm – bitte feinfühlig, zuviel ruiniert das Bild dann doch – an der Zeit und Verstärkung, am Weißabgleich und so weiter... haben die Aufnahme des Videos mit 1000 Bildern verarbeitungswürdig gemacht. Gut, man muss vor der Aufnahme etwas Zeit investieren, um alles den Gegebenheiten anzupassen. Einer Automatik würde ich es aber sowieso nicht überlassen. Bei Aufnahmen möchte ich doch bitte noch selber eingreifen können, um das Optimum heraus zu holen. Bei dem erreichten Kontrast konnte ich dann auch die Schärfeleistung erkennen und entsprechend fokussieren. Und so entstanden dann die Videos, bis die Wolken wieder zu dicht wurden und ich abbauen musste.

Die Bearbeitung, stacken, nachbearbeiten mit verschiedenen Freewareprogrammen, in das Format des Ergebnisses für die Veröffentlichung umwandeln, erfolgte dann wie immer. Und hier das Ergebnis. Kann man erkennen, dass die Sonne geschienen hat, als die Aufnahme entstand?

Mein Fazit: Die Kamera ist sehr gut zu gebrauchen, auch wenn die Bedingungen schwierig sind, alle Achtung.

Ich freue mich, dass ich auch so den Mond fotografieren kann und nicht immer auf die Dunkelheit warten muss. Das erweitert das Zeitfenster für mein Hobby doch sehr. Und jetzt ärgere ich mich nie mehr über viele Parameter zur Einstellung der Aufnahme! :-)

Liebe Grüße und Clear Sky

Reinhard Pankrath

Alle Bilder: Alle Rechte / Copyright bei Reinhard Pankrath

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides von Bresser

Der Sky Guide bietet umfassende Informationen zu Sternbildern, Planetenpositionen und astronomischen Ereignissen – ideal, um Ihre Beobachtungen zu planen und noch tiefer in die Astronomie einzutauchen. 
Besuchen Sie den Guide direkt hier, um das Beste aus Ihren Beobachtungen herauszuholen!
Product information "BRESSER Messier EXOS-2 EQ GoTo Mount"
BRESSER EXOS-2 GoTo Equatorial Mount. Mount, tripod and hand box with computer. This German mount has tracking motors in both axes that follow celestial objects very precisely.
The handbox with GoTo works reliable and controls the mount in every situation. 
Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds.
The battery pack (12 V) is conveniently fastened to the tripod shelf and takes eight size "D" batteries.
The mount rests on a very tough and rigid stainless steel tripod and can take optical tubes of up to 13 kg. 

GOTO - Stargazing at the push of a button! 
The Startracker GoTo System enables beginners to start astronomical observations in just a few minutes, and guides you to objects that are hard to localize through a standard finder scope.
Just push the button and the GoTo System will find planets, nebulae or galaxies for you and position your telescope automatically and precise.
The GoTo System database includes thousands of astronomical objects.
The Messier mount with GoTo System allows you to observe without tedious searching, or image faint objects that are hard to find in a standard finder scope.
The BRESSER StarTracker GoTo systems uses servo motors for both axes and features an ST-4 compatible autoguiding input. Guiding aggressivity can be set on the mount itself. 
The menu navigation of the Startracker Handbox is also multilingual and offers the settings of German, English, French, Spanish and Italian.


CHARACTERISTICS MOUNT
  • Stable parallactic mount with fine drive in both axes
  • Ball bearings in both axes for more precise movements
  • Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm )
  • Load capacity up to 13 kg payload
  • Circular bubble for easy horizontal alignment
  • GoTo Mount with motors and hand box controller, for easy finding and guiding moon, planets, stars and much more
  • ST-4 compatible autoguider interface
  • Pole height scale for setting the latitude
  • Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software
  • Pole finder scope with optional illumination ( item no. 4964212 )
  • Tripod weight: 4.7 kg
  • Mount weight: 6.7 kg (without counterweight)
  • Total weight incl. counterweight: 15.9 kg
  • Batteries: not included
SCOPE OF DELIVERY
  • Equatorial EXOS 2 GOTO mount with stainless steel tripod and Startracker handcontroller
  • Adjustable polar finder scope with optional illumination
  • Stainless steel tube field tripod with accessory tray
  • 1 x 4.5 kg counterweight
Bearing in alt-azimuth / RA: 2 ball bearings
Bearing in elevation / DEC: 2 ball bearings
Colour: white
Drive system in RA / AZ: 12V DC servo motors with encoders
Fine movements: Electric (RA and DEC)
Focus Group [Telescopes]: Advanced Amateurs, Beginners
Material: Stainless steel
Material tripod 3): Stainless Steel
Mount Type [Telescopes]: German/Equatorial Mount with GoTo

Accessories

BRESSER Universal Power Supply 230/12V, 3.0A
Versatile wall adapter for all telescopes with 12V. Suitable for BRESSER MCX 102/127 Goto Telescope, BRESSER EXOS II Goto Mount, BRESSER Automatik 80/400 Telescope, National Geographic 70mm/90mm Goto Telescope etc. FEATURESInput: 100-240 V ~ 60/50HzOutput: 12 V DC 3000 mAjack plug 2.5/5.5mm SCOPE OF DELIVERYBRESSER Universal Power Supply

€59.00*
BRESSER Messier NT-150L/1200 Hexafoc Optical Tube
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The MESSIER NT-150 excells with high rigidity and tack-sharp optics. 150mm aperture enable you to observe bright nebulas in the depth of space. Find the remnants of a gigantic stellar explosion in the year 1054 in the constallation Taurus or scan the glowing bands of the Great Orion Nebula. Detect the famous Whirlpool Galaxy in the Big Dipper or find the Dumpbell-Nebula in the constellation Vulpecula. This telescope is only an optical tube without mount and tripod.Please note: Reflector telescopes with optical design Newton are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest BRESSER refractor (lens) telescopes for landscape and nature observing. CHARACTERISTICS Optical design: reflector telescopeMirror diameter: 150 mm / focal length: 1200 mm / F/8Maximum recommended magnification: 300xTelescope for night and solar observation Collects 460x more light than the human eye Pure colour reproduction of the objects Very high quality Hexafoc focuser with 2.5" free inner diameter Optimized finder socket for comfortable use Cradle rings with handle and integrated piggyback camera holder (1/4 thread) Smartphone adapter for sky navigation included Dovetail plate with stainless steel rail T2 thread for DSLR cameras (T2-adapter ring for your camera is needed) 50,8 mm (2) to 31,7 mm (1,25) adapter with integrated T2 thread (T2-adapter ring for your camera is needed)SCOPE OF DELIVERYOptical tube 26 mm Super Plössl eyepiece 31,7 mm (1.25") Integrated 31,7mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2") eyepieces 6x30 optical viewfinder Rotatable star map Aperture solar filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Software Stellarium (via download)

€349.00*
BRESSER Car Adapter Cable 12V/7.5m
With the BRESSER car adapter cable 12V (7.5m) telescope mounts such as the LXD-75 or EXOS-2 Goto and many more can be powered by the cigarette lighter of your car.FEATURESCar adapter cable for telescope mounts12VCable length: 7.5 metersPower plug 2,5/5,5mm (inner/outer diameter) SCOPE OF DELIVERYcar adapter cable

€22.00*
BRESSER Messier NT203s/800 Optical Tube
NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.In the past few years the Bresser Newton telescopes have become the standard workhorse for Deep Sky astrophotography. We now proudly present the second generation of this telescope, the Bresser NT-203s/800 with Hexafoc and a fast parabolic main mirror. The Bresser NT-203s/800 f3.9 will deliver you deeper images due to its - compared to 8" f/5 systems - oversized primary mirror and therefore faster optical system with the same exposure time. The big 85 mm secondary prevents vignetting for optimal illumination The excellent 2.5" Hexafoc focuser also does not cause vignetting due to its large diameter and makes focussing a joy - the smoothness and shifting-free operation sets new standards in this price class. This groundbreaking focuser, tube rings with 44mm universal standard dovetail and camera mounting feature and a high-end finderscope with haircross and laser-engraved scale  leave nothing to desire even for demanding astrophotographers. The NT-203s/800 Hexafoc has a classical tube construction with an aluminium tube. The focuser can be upgraded with a 10:1 reduction (part No. 0625720) without problems. Ready to use with the  HR Coma Corrector (part No. 0510330) which eliminates coma, field-curvature and astigmatism.Please note: Reflector telescopes with optical design Newton are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest BRESSER refractor (lens) telescopes for landscape and nature observing.CHARCTERISTICS Optical design: reflector telescopeMirror diameter: 203 mm / focal length: 800 mm / F/3.9Maximum recommended magnification: 406xTelescope for night and solar observing Very high quality Hexafoc focuser with 2.5" free inner diameter Diffraction limited optics with parabolic main mirror 8x50 straight through viewfinder with reticle Optimized finder socket for comfortable use Cradle rings with handle and integrated piggyback camera holder (1/4 thread) Smartphone adapter for celestial navigation included Dovetail plate with stainless steel rail Can be connected to SLR cameras (optional T2 ring required) 50.8mm (2) to 31.7mm (1.25) adapter with integrated T2 thread (T2-adapter ring for your camera is needed) Aperture 203 mm Focal length 800 mm Focal ratio f/3.9 Backfocus fully inward focused: 100 mm 85 mm secondary mirror for optimal illumination Large knobs for primary and secondary mirror adjustment Tube without accessories: 8.7 kg - Tube with all accessories mounted: 11.5 kgSCOPE OF DELIVERYOptical tube 26 mm Super Plössl eyepiece 31,7 mm (1.25") Integrated 31,7 mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2") eyepieces 8x50 optical viewfinder Rotatable star map Aperture solar filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Software Stellarium (via download)

€609.00*
LUNT LS100PS Dovetail Bar 100mm (GP level)
This dovetail plate with 100mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.FEATURESLength: 100mmWidth: 44mmDistance between screws: 35mmScrews thread: 1/4"-20SCOPE OF DELIVERY1 x 100mm dovetail plate2 x 1/4"-20 screws

€69.00*
BRESSER Messier NT-203/1000 Hexafoc Optical Tube
NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The BRESSER Messier NT-203 telescope with a parabolic main mirror provides you images that a few years ago were impossible in this price class. Modern production technology lets you track the shadows of Jupiter's moons on the planet; the amount of structure and details on the surface of the planet is breathtaking. But the BRESSER Messier NT-203 is not only great for planetary observation: Detect details in faint distant galaxies and let the glow of nebulae take you to a journey into the depth of the milky way. The BRESSER Messier NT-203 provides you with images from the remains of giant exploded stars and gives you a view into the nursery of new stars. Let this big scope take you away to the beauty of the universe! Please note: Reflector telescopes with optical design Newton are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest BRESSER refractor (lens) telescopes for landscape and nature observing.CHARACTERISTICSOptical design: reflector telescopeMirror diameter: 203 mm / focal length: 1000 mm / F/5Maximum recommended magnification: 406x Telescope for night and solar observingVery high quality Hexafoc focuser with 2,5" free inner diameterDiffraction limited optics with parabolic main mirror8x50 straight through viewfinder with reticleOptimized finder socket for comfortable use Cradle rings with handle and integrated piggyback camera holder (1/4 thread)Smartphone adapter for celestial navigation includedDovetail plate with stainless steel rail 50,8 mm (2) to 31,7 mm (1,25) adapter with integrated T2 thread (T2-adapter ring for your camera is needed) SCOPE OF DELIVERYOptical tube 26 mm Super Plössl eyepiece 31,7 mm (1.25") Integrated 31,7 mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2") eyepieces 8x50 optical viewfinder Rotatable star map Aperture solar filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Software Stellarium (via download)

€509.00*
LUNT LS150PS Dovetail Bar 150mm (GP level)
This dovetail plate with 150mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.FEATURESLength: 150mmWidth: 44mmDistance between screws: 35mmScrews thread: 1/4"-20SCOPE OF DELIVERY1 x 150mm dovetail plate2 x 1/4"-20 screws

€85.00*
BRESSER Messier 203/1200 Hexafoc Optical Tube
NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The BRESSER Messier NT-203/1200 enables observations, which were not feasible in this price range only a few years ago. This Messier NT203/1200 is optimized for planetary observations because of the longer focal length and less obruction which offers a better sharpness and contrast. The most advanced manufacturing technology allows to follow the shadows of the moons of Jupiter on the planet itself ; the abundance of structures and details on the surface of Jupiter are stunning. The BRESSER Messier NT-203/1200 can not only score in the planetary observation: Discover structures in distant galaxies and let yourself be captivated by the fog patches of the emission nebula in the vastness of the Milky Way. See the remains of exploded giant stars the Messier NT-203/1200 and observe the birthplaces of the new star. You will be surprised of the beauties of the universe with this larger than average device! This telescope is only an optical tube without mount and tripod.Please note: Reflector telescopes with optical design Newton are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest BRESSER refractor (lens) telescopes for landscape and nature observing. CHARACTERISTICSOptical design: reflector telescopeMirror diameter: 203 mm / focal length: 1200 mm / F/6Maximum recommended magnification: 406xTelescope for night and solar observation Advanced optics for planetary observations Longer focal length and less light obstruction Offers an even sharper view with high contrast Very high quality Hexafoc focuser with 2,5" free inner diameter Diffraction limited optics with parabolic main mirror 8x50 straight through viewfinder with reticle Optimized finder socket for comfortable use Cradle rings with handle and integrated piggyback camera holder (1/4 thread) Smartphone adapter for celestial navigation included Dovetail plate with stainless steel rail 50,8 mm (2'') to 31,7 mm (1,25'') adapter with integrated T2 thread (T2-adapter ring for your camera is needed)SCOPE OF DELIVERYOptical tube 26 mm Super Plössl eyepiece 31,7 mm (1.25") Integrated 31,7mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2") eyepieces 8x50 optical viewfinder Rotatable star map Aperture solar filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Software Stellarium (via download)

€589.00*
LUNT LS300PS Dovetail Bar 300mm (GP level)
This dovetail plate with 300mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.Technical data:• Length: 300mm• Width: 44mm• Distance between screws: 35mm• Screws thread: 1/4"-20Delivered by order:• 1 x 300mm dovetail plate• 2 x 1/4"-20 screws

€113.00*
BRESSER Messier MC-127/1900 OTA Optical Tube
NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The best catadioptic design named Maksutov-Cassegrain produces a sharp, crispy and high-contrast image. A perfect telescope for a convenient entry into astronomy. CHARACTERISTICS Telescope for night and solar observation High-quality Maksutov-Cassegrain optics with high focal length and extremely sharp image Ideal for small bright nebulas, globular clusters, the moon, planets Optical design: Maksutov-Cassegrain Maximum recommended magnification: 254x Aperture: 127 mm Focal length: 1900 mm Aperture ratio: f/15 Optical coatings: Multi-Coating Universal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5) SCOPE OF DELIVERYMaksutov Optical Tube Assembly 26mm SuperPlössl eyepiece (31.7 mm / 1.25'')SC Eyepiece adapter (31.7 mm / 1.25'') Star diagonal mirrorDovetail plate for GP LevelLED viewfinderAperture solar-filterRotatable star mapSoftware Stellarium (via download)Tube thread: M51x1.0mm

€389.00*
BRESSER Messier AR-102xs/460 Hexafoc Optical Tube
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation. Ambitious beginners and advanced observers alike will see the brightest objects outside our solar system with the MESSIER AR-102xs. Watch details in the Great Orion Nebula from the astonishing distance of 1500 lightyears (14.200.000.000.000 km)! Scanning the lunar terminator is simply a pleasure. Scanning the Milky Way in Saggitarius shows a multitude of deep-sky objects. Richfield telescope with ED glass lens and a short focal length of 460mm. Suitable for traveling and to observe large open star clusterns and the milky way This telescope is only an optical tube without mount and tripod. FEATURESOptical design: refractor telescopeLens diameter: 102 mm / focal length: 460 mm / F/4.5Maximum recommended magnification: 204x Very high quality Hexafoc focuser with 2.5" free inner diameter 6x30 straight through viewfinder;optimized finder bracket for comfortable use 31.7mm (1.25") diagonal mirror Universal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5) 50,8 mm (2'') to 31,7mm (1,25'') adapter with integrated T2 thread (optional T2-adapter ring for your camera is needed) telescope for night and solar observation SCOPE OF DELIVERY optical tube Eyepiece: 26 mm Super Ploessl 31.7mm (1.25") 31,7 mm (1,25") diagonal mirror integrated 31,7mm and T2 adapter Prism rail with stainless steel clamping surface (44mm universal dovetrail for GP/EQ5/LXD75) 6x30 viewfinder rotable star chart Objective Solar- filter Software Stellarium ( via Download)

€339.00*
BRESSER Messier MC-152 Hexafoc Optical Tube Assembly
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The MESSIER MC-152 excells due to its compact optics. The long focal length of this telescope facilitates relaxed observations with high magnifications - the compact size makes it the perfect mobile telescope. 150mm aperture enable you to observe bright nebulas in the depth of space. Find the remnants of a gigantic stellar explosion in the year 1054 in the constallation Taurus or scan the glowing bands of the Great Orion Nebula. Detect the famous Whirlpool Galaxy in the Big Dipper or find the Dumpbell-Nebula in the constellation Vulpecula. This telescope is only an optical tube without mount and tripod.FEATURESTelescope for night and solar observationHigh quality BRESSER Maksutov opticsIdeal for planets, double stars and planetary nebulaeExcellent focuser with 65mm open diameteroptimized finder socket for comfortable use Cradle rings with handle and integrated piggyback camera holder (1/4 thread) Smartphone camera adapter for sky navigation includedUniversal 44mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5)T2 thread for DSLR cameras (T2-adapter ring for your camera is needed) 50,8mm (2") to 31,7mm (1,25") adapter with integrated T2 thread (T2-adapter ring for your camera is needed) SCOPE OF DELIVERYoptical tubeaperture solar-filter26mm Super Plössl eyepiece (31.7mm / 1.25")integrated 31.7 mm and T2 adapteradapter for 50.8 mm (2")mounting ring (for EXOS and similar mounts)handle with camera holderSmartphone adapter for celestial navigation6x30 Viewfinder90° star diagonal 31,7mm (1,25")astronomy PC software Stellariumrotatable star map

€889.00*
BRESSER Messier AR-102s/600 Hexafoc OTA
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation. Ambitious beginners and advanced observers alike will see the brightest objects outside our solar system with the MESSIER AR-102. Watch details in the Great Orion Nebula from the astonishing distance of 1500 lightyears (14.200.000.000.000 km)! Scanning the lunar terminator is simply a pleasure. Scanning the Milky Way in Saggitarius shows a multitude of deep-sky objects. This telescope is only an optical tube without mount and tripod. FEATURESOptical design: refractor telescopeLens diameter: 102 mm / focal length: 600 mm / F/6Maximum recommended magnification: 204x Very high quality Hexafoc focuser with 2.5" free inner diameter 6x30 straight through viewfinder;optimized finder bracket for comfortable use 31.7 mm (1.25") diagonal mirror Cradle rings with handle and integrated piggyback camera holder (1/4'' thread) Universal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5) 50,8mm (2'') to 31,7mm (1,25'') adapter with integrated T2 thread (optional T2-adapter ring for your camera is needed) Smartphone adapter for sky navigation included telescope for night and solar observation SCOPE OF DELIVERY optical tube Eyepiece: 26 mm Super Ploessl 31.7 mm (1.25") 31,7 mm (1,25") diagonal mirror integrated 31,7 mm and T2 adapter Prism rail with stainless steel clamping surface (44mm universal dovetrail for GP/EQ5/LXD75) 6x30 viewfinder rotable star chart Objective Solar- filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Software Stellarium ( via Download)

€319.00*
BRESSER Counterbalance 4,5kg for EXOS-2/EQ5
Additional counterweight to balance heavy accessories etc.

€39.90*
BRESSER Messier AR-102/1000 Hexafoc Optical Tube assembly
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation. Ambitious beginners and advanced observers alike will see the brightest objects outside our solar system with the BRESSER Messier AR-102 telescope. Watch details in the Great Orion Nebula from the astonishing distance of 1500 lightyears (14.200.000.000.000 km)! Scanning the lunar terminator is simply a pleasure. You will never give the BRESSER Messier AR-102 Telescope away voluntarily.  This telescope is only an optical tube without mount and tripod. FEATURESOptical design: refractor telescopeLens diameter: 102 mm / focal length: 1000 mm / F/9.8Maximum recommended magnification: 204x Very high quality Hexafoc focuser with 2.5" free inner diameter 6x30 straight through viewfinder;optimized finder bracket for comfortable use 31.7 mm (1.25'') diagonal mirror Cradle rings with handle and integrated piggyback camera holder (1/4'' thread) Universal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5) 50.8 mm (2'') to 31.7 mm (1.25'') adapter with integrated T2 thread (optional T2-adapter ring for your camera is needed) Smartphone adapter for sky navigation included telescope for night and solar observation SCOPE OF DELIVERY optical tube Eyepiece: 26 mm Super Ploessl 31.7 mm (1.25") 31.7 mm (1.25") diagonal mirror integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamping surface (44 mm universal dovetrail for GP/EQ5/LXD75) 6x30 viewfinder rotable star chart Objective Solar- filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Software Stellarium (via Download)

€319.00*
BRESSER Messier AR-127S/635 OTA Optical Tube Hexafoc
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.Due to the short focal length the BRESSER Messier AR-127S telescope provides large and bright fields of view. Don't forget to observe the Anrdomeda Galaxy with the Messier AR-127S! The glow of this object that you can observe from the immense distance of 2 million lightyears is as spectacular as it is to watch large nebulae with the Messier AR-127S. Because of the large aperture it is even possible to use nebular filters on the Messier AR-127S telescope. These filters can enhance the appearance of emission nebulae to an astonishing contrast level. The special four lens construction delivers a better perfomance than a classical two lens achromat of this focal length.FEATURESOptical design: refractor telescopeLens diameter: 127 mm / focal length: 635 mm / F/5Maximum recommended magnification: 254xTelescope for night and solar observationHigh quality BRESSER refractor opticsUniversal telescope for planets, double stars, planetary nebulae and deep-skyExcellent focuser with 2,5'' (65 mm) open diameter6x30 straight through viewfinder reticleoptimized finder socket for comfortable useCradle rings with handle and integrated piggyback camera holder (1/4 thread)Smartphone camera adapter for sky navigation includedUniversal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5)50,8 mm (2'') to 31,7 mm (1,25'') adapter with integrated T2 thread (T2-adapter ring for your camera is needed) SCOPE OF DELIVERYOptical Tubeaperture solar-filtereyepieces: 26 mm Super Ploessl 31.7 mm (1.25'')2'' eyepiece adapter8x50 viewfinder Smartphone adapter for celestial navigationDiagonal mirrorTube clamp with handle and camera holder

€579.00*
Illumination Unit Polefinder EXOS-2 thread M8x0.75
Red polar viewfinder illumination unit for BRESSER EXOS-2 mounts with fixing thread M8x0.75mm. An adjustable illumination makes it easier to find the marked sky objects on the polar viewfinder.IMPORTANT NOTEPlease verify the type of fixing thread prior to your purchase. We offer two different sizes: 12mm (part No. 4964211 for older EXOS-2 mounts) and 8mm (part No. 4964212 for newer EXOS-2 mounts)FEARTURESRetrofittable red pole finder illumination for BRESSER EXOS-2Illuminates the graticule in the viewfinderMakes it easier to find the celestial objectsAlso for 4900850 BRESSER 8x50 viewfinder as spare partAlso for Explore Scientific 8x50 viewfinders as spare partSCOPE OF DELIVERYPolar Viewfinder Illumination unit for EXOS-2Fixing thread M8x0.75mm

€19.90*
OCULUM VERLAG - Fernrohr-Führerschein in 4 Schritten (GERMAN)
Please note that this astronomy book for beginners is only available in German.

€19.90*
BRESSER Messier AR-152L/1200 Hexafoc Optical Tube
NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.For the ambitious planetary observer the BRESSER Messier AR-152L is a dream machine. View tiny dots and structures in the cloud bands of Jupiter, small rims and craters on the surface of the moon and details on Mars, including the ice-covered polar regions of our neighbouring planet. Watch Jupiter's moons dance around the planet and detect the greenish glow of Uranus far beyond Saturns orbit. The combination of large aperture and long focal length provides tack-sharp high-contrast pictures that will impress you every time anew. This telescope is only an optical tube without mount and tripod. CHARACTERISTICS Optical design: refractor telescopeLens diameter: 152 mm / focal length: 1200 mm / F/7.9Maximum recommended magnification: 254xTelescope for night and solar observation High-quality and light gathering achromatic objective lens Modern multi-coating of the lenses for a bright and high-contrast image Robust aluminium tube construction Very high quality Hexafoc focuser with 2.5" free inner diameter 8x50 viewfinder with crosshair eyepiece Optimised finder mount for comfortable viewing 31.7 mm (1.25") zenith mirror Cradle rings with handle and integrated piggyback camera holder (1/4 thread) Smartphone adapter for celestial navigation included Prism rail with stainless steel clamping surface (44 mm universal dovetail for GP/EQ5/LXD75) 50.8 to 31.7mm adapter with integrated T2 adapter (optional T2 ring required) SCOPE OF DELIEVRY Optical tube 26 mm Super Plössl eyepiece 31,7 mm(1.25'') 31,7 mm (1.25") Zenith mirror, Integrated 31,7 mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2") eyepieces 8x50 optical viewfinder Rotatable star map Aperture solar filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Astronomy PC software Stellarium (via download)

€799.00*
BRESSER Messier NT-150S/750 Hexafoc Optical Tube
NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation. The BRESSER Messier N-150s excels with tack-sharp parabolic optics. The 150mm aperture enables you to observe bright nebulas in the depth of space. Find the remnants of a gigantic stellar explosion from the year 1054 in the Taurean constellation, or scan the glowing bands of the great Orion Nebula. Detect the famous Whirlpool Galaxy in the Big Dipper or find the Dumpbell-Nebula in the constellation Vulpecula (little fox). This telescope is only an optical tube without mount and tripod. Please note: Reflector telescopes with optical design Newton are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest BRESSER refractor (lens) telescopes for landscape and nature observing. CHARACTERISTICS OPTICS Optical design: reflector telescope Mirror diameter: 150 mm / focal length: 750 mm / F/5 Maximum recommended magnification: 300x Telescope for night and solar observation Very high quality Hexafoc focuser with 2,5'' free inner diameter Diffraction limited optics with parabolic main mirror 6x30 straight through viewfinder with reticle Optimized finder socket for comfortable use Cradle rings with handle and integrated piggyback camera holder (1/4 thread) Smartphone adapter for celestial navigation included Dovetail plate with stainless steel rail 50,8 mm (2) to 31,7 mm (1,25) adapter with integrated T2 thread (T2-adapter ring for your camera is needed) SCOPE OF DELIVERY Optical tube 26mm Super Plössl eyepiece (31.7 mm / 1.25'') Integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2'' eyepieces) 6x30 optical viewfinder Rotatable star map Aperture solar filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Astronomy PC software Stellarium (via download)

€325.00*
BRESSER Portable Power Supply 100 Watt
Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with a solar panel (available as an option). Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.FEATURESPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputInstruction manual

€169.09*
%
BRESSER Mobile Solar Charger 60 Watt with USB and DC output
Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. It is also suitable for charging large power stations such as the BRESSER Power Station 100 Watt (art. no.3810000) and the BRESSER Power Station 500 Watt (art. no. 3810020) as well as power stations from other manufacturers with suitable connection values.Universal charger with flexible connection optionsTwo black USB A sockets for normal charging and another orange USB A socket with QC3.0 standard for fast charging of newer generations of devices are available for powering your devices. An additional universal connection cable with a hollow DC plug 5.5/2.1 mm in diameter and 2.5 metres long, as well as 10 plug adapters (7.9/5.5mm, 7.4/5.0mm, 6.5/4.3mm, 6.3/3.0mm, 5.5/2.5mm, 5.5/1.7mm, 5.5/3.2mm, 4.8/1.7mm, 4.0/1.7mm, 3.5/1.35mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example 1: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 3400mA (3.4 amps). So 3000 : 3400 x 75 = 66 minutes. Dividing the result by 60 gives the charging time in hours: 1.1 hours.This means that an average smartphone can be fully charged in just about 1.1 hours with a 60-watt solar panel.   Example 2: A large power station battery with a capacity of 13000mAh (13.0 Ah) and a charging current via 18 volts DC plug connection of 3300mA (3.3 amps). So 13000 : 3300 x 75 = 295 minutes. Dividing the result by 60 gives the charging time in hours: 4.9 hours.This means that an average smartphone can be fully charged in just about 5 hours with a 60-watt solar panel.   Carabiner hook for attachment includedIn order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 60 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets, power banks and larger power stations etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via 3 x USB A and DC hollow plug with adaptersIncludes one orange USB A jack with QC3.0 for fast chargingMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 60 wattsOutput voltage at the DC connection cable: 18 voltsOutput current at the DC connection cable: max. 3.3 ampsUSB A sockets: 2 x black USB and 1 x orange USB QC3.0 (for quick charging)Output voltage at the black USB A sockets: 5 voltsOutput current at the black USB A sockets: max. 3.1 ampsOutput voltage and current at the orange USB A QC3 socket: 5V3.4A/9V2.5A/12V2.0ADC connection cable length: 2.5 metresDC plug adapters: 7.9/5.5mm, 7.4/5.0mm, 6.5/4.3mm, 6.3/3.0mm, 5.5/2.5mm, 5.5/1.7mm, 5.5/3.2mm, 4.8/1.7mm, 4.0/1.7mm, 3.5/1.35mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 415 x 370 x 45 mmDimensions when unfolded: 1275 x 415 x 25 mmWeight: 2.55 kgSCOPE OF DELIVERYSolar panel 60 Watt (1 piece)Carabiner hook (4 pieces)Integrated DC connection cable (1 piece)Plug adapter (10 pieces)User manual

€119.59* €149.00* (19.74% saved)
BRESSER Counterbalance 2.0 kg for EXOS-1 + 2
Additional counterweight to balance heavy accessories etc.FEATUREScolor matched with the Bresser EXOS-1/2 seriessuitable for counterbalance bar with 20mm diameterSCOPE OF DELIVERY1x counterbalance 2.0kg

€29.90*

Similar products

%
BRESSER Portable Power Station 500 Watt
Portable power storage (mobile power bank) in maxi format by BRESSER The energy you need in every situation: that's what the mobile Power Station 500 Watt by BRESSER offers you. Whether for tough outdoor use, van life, in the garden or the event of a power failure at home - with the various connection options, you can operate and charge almost all common electronic devices via the powerful and recharcheable 520Wh lithium-ion battery. Perfect for notebooks, musical instrument, etc.: The high-quality 230 volt 500 watt output with a pure sinus wave also supplies sensitive devices with power. In addition, this mobile power station is a silent and environmentally friendly alternative to power generators with combustion engines. In combination with a solar panel (available as an option), the built-in solar charge controller allows you to easily use the sunshine to directly charge your Power Station. The built-in Anderson input for direct charging via solar panel makes this particularly easy. Connection options Charge up to 4 x USB mobile devices such as smartphones, MP-3 players, mobile game paddles, cameras, drones, etc. at the same time. The device offers 1 x USB-A and 1 x USB-C fast charging output with Qualcomm Quick Charge 3.0 support. You can also power up to 5 x 12 volt devices with a total of 10 amps of current draw. Use 1 direct car cigarette lighter connector socket and 4 x DC 2.1/5.5mm connector sockets. With the 2 included adapters from 5.5/2.1mm hollow plug to cigarette lighter socket, you can connect car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. directly and in parallel. In addition, 2 sockets with 230 volts and a total of 500 watts continuous power are available on the unit. Ideal for connecting chargers for notebooks/tablets/smartphones, mobile coolers and refrigerators, musical instruments, etc. or other electrical devices in this power class. The heart of the Power Station: the built-in battery The powerful 520Wh 43Ah/12Volt (140400mA/3.7V) lithium-ion battery reliably stores your energy reserve. It is charged within 8 hours with the included 230V charger or 12V car battery charging cable. Thanks to the built-in solar charge controller, you can also charge the Power Station directly using a solar panel (available as an option). A clear display shows you all relevant information such as the battery charge status, battery charging process, USB output ON/OFF and AC/DC output ON/OFF. Possible operating time with typical applicationsHow long does the Power Station charge or operate your devices? You can easily calculate the approximate operating time yourself: runtime (approx.) = Power Station 520 watt-hour battery x 0.85 / devices input power in watts.For example a notebook with 45 Watt input power: 520 Wh x 0.85 / 45 Watt = runtime in hours; 520 x 0.85 / 45 = 10 hours runtime.LED lamp with 5 Watt: approx. 88 hoursLED lamp with 10 Watt: approx. 44 hoursCamping cooler with 30 Watt: approx. 14 hoursNotebook with 45 Watt: approx. 10 hoursTV with 60 Watt: approx. 7 hoursSmartphone: 50 x chargingTablet computer: 30 x chargingDigital camera: 50 x chargingNotebook: 5 x charging Extensive electronic protection of all current inputs and outputs: The Power Station is protected against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required. FEATURESPortable energy storage (Power Bank / Power Station)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesOperate or charge up to 11 devices at the same timePure sinus wave for both 230 volt outputsAlso suitable for sensitive devices such as notebooks or musical instrumentsMany connection options and adapters includedEnvironmentally friendly and silent alternative to power generatorsIntegrated solar charge controller for direct charging via solar panelComfortable carrying handle with non-slip rubber coatingPowerful 520Wh 43Ah/12 Volt (140400mA/3.7V) lithium ion battery3 x USB A with each 5-9 Volt 2.1 Ampere) and 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support1 x USB C with 5-12 volts 3.0 amps (for smartphones and tablets of the latest generation)4 x 12 Volt DC out 5.5/2.1mm hollow plug (max. total load 10 Amps, short time 12 A)2 x 230 Volt AC out (500 Watt continuous power, short time 1000 Watt)Indication of battery charge status and USB/DC/AC output on/off staus on displayInput charging socket: 13-22 Volt / 6 Ampere (via power supply or solar panel)Built-in Anderson input for direct charging via solar panelCharging time 0-100% approx. 8 hoursTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 Volt 6 amps230 Volt power cord for Europe (1 pc.)230 Volt power cord for UK (1 pc.)Car charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V output (2 pcs.)Instruction manual

€349.00* €549.00* (36.43% saved)
%
BRESSER Computer Cable for Remote Control of MCX Goto Telescopes and EXOS-II EQ Goto Mounts
For remote control of a BRESSER MCX 102/127 Goto Telescope or a BRESSER EXOS-II EQ Goto Mount via computer cable. Navigate your telescope comfortably with navigation software and Windows 10 computer. One click on the star map on the computer and the telescope is positioned on the desired object. NOTES(This list is exemplary and not exhaustive)To control a BRESSER MCX Goto telescope, no software update of the Computer Handbox is required. A direct use is therefore possible. To control a BRESSER EXOS-II EQ Goto mount, the Computer Handbox must be updated to software version v2.3 with the help of this computer cable set. This cable set is not suitable for the EXPLORE SCIENTIFIC EXOS-2 with PMC-Eight Goto. This set does not include navigation software and computer. DOWNLOAD NAVIGATION SOFTWARE (alternatively)Sky Map Pro Demo: https://nextcloud.bresser.de/s/PnQr9gyigxp9A6zSky Map Pro ASCOM PLUG-in: http://download.ascom-standards.org/plugins/SkyMapProPlugin.zip Carte Du Ciel: https://www.ap-i.net/skychart//en/startStellarium: https://stellarium.org/de FEATURESConnects a BRESSER MCX102/127 Goto to a PC Connects a BRESSER EXOS-II Goto to a PC Comfortable control by computer USB to serial adapter included Required firmware update for EXOS-II included Compatible with WIN 10 + 11SCOPE OF DELIVERYRS-232 computer cable USB 2.0 to RS-232 adapter + driver CD-Rom Firmware v2.3 for EXOS-II Goto Handbox Flash Utility Software for Handbox Update ASCOM driver for BRESSER MCX/EXOS-II Goto Operating instructions

€42.79* €45.00* (4.91% saved)
BRESSER Wall adapter 12V/ 2A
With this adapter, you can operate your Bresser MCX 102/127 Goto telescope, BRESSER 80/400 Goto or National Geographic 70mm/90mm Goto telescope using a 230V~ wall connector.

€49.00*
%
BRESSER Mobile Solar Charger 21 Watt with USB and DC output
Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070.Universal charger with flexible connection optionsOne USB-A connection socket is available for powering your devices. There is also an additional universal connection socket for DC bar plugs with a diameter of 5.5/2.1 mm. A universal connection cable with a 5.5/2.1mm DC bar plug on both sides and a length of 2 metres, as well as 3 plug adapters (3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 2400mA (2.4 amps). So 3000 : 2400 x 75 = 94 minutes. Dividing the result by 60 gives the charging time in hours: 1.6 hours.This means that an average smartphone can be fully charged in just about 1.6 hours with a 21-watt solar panel. Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. If you attach it to your backpack, you can even use the time during a hike for charging. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 21 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via USB A and DC hollow plug with adaptersMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 21 wattsOutput voltage at the DC socket: 18 voltsOutput current at the DC socket: max. 1.1 ampsOutput voltage at the USB A socket: 5 voltsOutput current at the USB A socket: max. 2.4 ampsCable length of the DC connection cable: 2.0 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 290 x 195 x 35 mmDimensions when unfolded: 815 x 290 x 20 mmWeight: 1,0 kgSCOPE OF DELIVERYSolar panel 21 Watt (1 piece)Carabiner hook (2 pieces)DC connection cable (1 piece)Plug adapter (3 pieces)User manual

€48.29* €59.00* (18.15% saved)
%
Vixen Porta II azimuthal mount
The Vixen Porta II is a high-quality azimuthal mount from the award-winning manufacturer Vixen. Featuring an intuitive, versatile and reliable design, the Porta II was specially developed to enable quick and precise telescopic observations along the vertical and horizontal axes without the need for a complex setup. It comes with fine adjustment wheels for fine tuning the position of the telescope to track astronomical objects. It also has a highly portable design thanks to the detachable mount head, which can be quickly detached from the tripod via an M10 screw. In addition, the dovetail mounting system (Vixen standard) ensures maximum compatibility with a wide range of telescopes. The Vixen Porta II mount in detail Easy to use The Porta II does not require a clamp, as it sports a slip clutch that allows you to adjust the mount to your desired object. It also holds its position automatically, making it very easy to use. Highly portable design The mount is easy to transport thanks to the Porta II mount head, which can be detached by removing a single screw. Easy to operateThe Porta II adjustment system allows you to track objects and make fine adjustments using the supplied shafts, which can be repositioned as necessary for optimal viewing comfort.Practical accessory storage The accessory holder features slots for your eyepieces. It can also be used to store smaller photography accessories. The holder is easy to mount via a centrally positioned screw. Built-in tool The mount comes with a tool for adjusting the friction of the slip clutch. The tool is located underneath the rubber cover for easy access. FEATURES 360° fine adjustment with worm gears2x sprockets with 120 teeth eachNo axle clamp requiredSlip clutch friction systemDovetail system (compatible with the GP and Sphinx mount) Adjusts by up to 45° Mounts tubes with an aperture of up to 155 mmPACKAGE CONTENTSVixen Porta II mountAluminium tripod2 fine adjustment wheelsMounting toolStorage shelf for accessories

€249.00* €325.00* (23.38% saved)
BRESSER Micro Motion Head MH-100 (Polar-Wedge)
Tripod head with fine adjustment for fast and precise pole height adjustment of the BRESSER StarTracker Astrophoto Mount PM-100 art. no. 4964120. The BRESSER Micro Motion Head MH-100 allows a very precise adjustment by using large dimensioned knurled screws. In order to keep the adjustment distances by using the knurled screws as small as possible, the mounting plate has a quick-release clamping device with toothing in order to be able to select a rough presetting of the pole height (latitude at the location). The Micro Motion Head MH-100 can be mounted on any photo tripod with 1/4 inch photo thread closure. The BRESSER StarTracker astrophoto mount can then be mounted on the MH-100 tripod head without the use of tools using a 1/4" photo thread screw. The complete  motion head is made of black anodized aluminum and guarantees highest stability by the use of solid material. The knurled screws with fine pitch thread are even made of stainless steel and guarantee a long durability and corrosion resistance. Ideal for optimizing tracking accuracy in astrophotography. IMPORTANT NOTE: Can also be used as a stable adjustment element of a telescopic sight in astrophotography. Parallel alignment of the main telescope and the guide telescope is thus also possible quickly and precisely. Base plate connection: 3 x 1/4 inch photo thread with 35.0 mm hole spacing. Mounting plate connection: 2 x M8x1.25 thread with 35.0mm hole spacing. FEATURES Compact micro motion head with fine adjustment Functions as a so-called polar-wedge For precise adjustment of polar alignment (EQ mode)Mounting plate with quick-release clamping device and toothingCan be used with any photo tripod and 1/4inch thread adapterMade of black anodised aluminium and stainless steel Quick and easy to use deviceSuitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX  Also ideal as an adjustment element of an auto-guiding scopeFor parallel alignment of main telescope and guiding telescope Base plate connection: 3 x 1/4 inch photo thread; hole spacing 35.0mm Connection mounting plate: 2 x M8x1.25mm thread; drilling distance 35,0mm SCOPE OF DELIVERY Micro Motion Head MH-100 Instruction manual

€85.00*
BRESSER Photo mount with field tripod and wedge
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER photo mount is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain punctiform even with long exposures. Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER photo mount is designed for a camera with lens of max. 2.5 kg total weight to carry and track. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the optical pole finder, this is done quickly.  After setting up the light and compact photo mount, simply set the approximate latitude (pole height) to the scale and aim Polaris through the illuminated pole finder scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ...  The tracking is carried out by a precise stepper motor, which can also be moved via the hand box with 2- or 32-fold speed in forward and reverse. Thus, the sky section can be adjusted even more precisely. Low power consumption allows up to 50 hours of operation with just one battery charge.  The height-adjustable stainless steel tripod with polar wedge is an extremely stable base for the BRESSER photo mount. Thanks to the integrated circular level in the tripod head even the leveling of the photo mount is child's play. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount and the tripod with polar wedge are also available separately - Product No.: 4964111 and 4964112   FEATURESEquatorial Photo-MountAdjustable stainless steel field tripod with polar wedge and bubble levelAutomatic siderial tracking against the Earth rotation Handbox to control the tracking motors (2x/32x)Suitable for northern and southern henisphereOptical pole finder scope with illumination unit includedBallhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 3/8" threaded bolt for ballhead mountingPhoto-Mount with 1/4" und 3/8" inner threads for tripod mountingHigh precision stepper motor with helical gear for accurate tracking Large screws and handles for easy usage at night  Battery operation or stabilized power adapter (optional acc.) Battery life: up to 50 hoursPower connector at handbox: 6 volts DC jack 5.5/2.5mm (positive pole at center pin)Weight Photo-Mont with ballhead: 1.4 kg Weight tripod with polar wedge: 3.5 kgLoad capacity of Photo-Mount: up to 2.5 kg Height of camera sattle plate max. 140 cmSCOPE OF DELIVERYFoto-Mount headTracking motor with HandboxUltra-stable stainless steel field tripod with bubble levelBallhead with quick release saddle plate Pole finder scope with illumination unitBattery compartment 6 volts with case (no D-batteries included)Manual   

€409.00*
%
BRESSER Field Tripod ST-3 stainless steel
The BRESSER Field Tripod ST-3 is a solid and height-adjustable tripod with double tripod leg clamp and made of corrosion-resistant stainless steel. It is suitable for direct usage with the BRESSER Slider Binocular Mount. Adjust the extendable stainless steel tripod to the desired base height and thereby pre-select your favourite observation position. For example, for landscape observation while standing or sitting, the full tripod height should be used. For night sky observation, a lower setting is recommended to ensure a comfortable viewing position while sitting or lying down. The tripod is equipped with a standard GP mounting head and a central screw with metric M10 threaded shaft. It is also suitable for EXOS-1 and EXOS-2 EQ mounts. The upper tripod leg tubes have a diameter of 50.8 mm (2 inches).FEATURESFor usage with BRESSER Slider Binocular Mount Standard GP mount head Also suitable for EXOS-1 and EXOS-2 EQ mounts Solid stainless steel and aluminium structure Double tripod leg clamp Height adjustable approximately from 68 to 110 cm Tripod weight: 5.5 kg Transport length approximately 87 cmUpper tripod leg tubes have a diameter of 50.8 mm (2 inches)SCOPE OF DELIVERYTripod Accessory tray Central spindle

€122.00* €199.00* (38.69% saved)
BRESSER BR-BHS Ball Head for Lightstand
This is a universal ball head that can be mounted on a spigot connector of a lamp stand. The lamps or the accessories can be aligned in any position. A 1/4 thread is attached to the top of the adapter to provide additional accessories. FEATURESHeight: 9 cmUniversal ball headSCOPE OF DELIVERYball head

€16.85*
Vixen rigid Accessory Tray for HAL130 and Porta II Tripods
The Vixen rigid Accessory Tray for HAL130 and Porta II Tripods offers practical storage space for eyepieces and various accessories.It also improves the overall stability of the tripod.The tray can be used on the HAL130 and SXG HAL 130 for GP and SX, as well as on the Porta II tripod.PROPERTIESFor eyepieces and various accessoriesIncreases the stability of the tripodsCan be used on HAL130, SXG HAL 130 and Porta tripodsWHAT'S INCLUDEDTray for tripodsScrew set 

€29.00*
BRESSER Portable Power Supply 100 Watt
Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with a solar panel (available as an option). Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.FEATURESPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputInstruction manual

€169.09*
BRESSER Counterbalance 4,5kg for EXOS-2/EQ5
Additional counterweight to balance heavy accessories etc.

€39.90*

Customers also bought

BRESSER Laser Collimator 31.7mm (1,25")
The laser-collimator makes aligning the mirrors of a Newtonian telescope simple, fast and precise. With the laser you collimate your optics even in the dark without additional accessories. Precisely machined it fits a 1,25" focuser without tilting. The built-in projection area enables collimating even long focal length scopes in a breeze. Suitable for Newtonian, Schmidt-Newtonian and Maksutov-Newtonian teleskopes. FEATURES31.7mm(1.25") Eyepiece Barrel Diameter Machined anodized aluminum housing with all internal surfaces coated non-reflective flat blackBuilt in laser collimatableIMPORTANT: Laser products have to be kept out of reach of children!

€74.90*
BRESSER Universal Power Supply 230/12V, 3.0A
Versatile wall adapter for all telescopes with 12V. Suitable for BRESSER MCX 102/127 Goto Telescope, BRESSER EXOS II Goto Mount, BRESSER Automatik 80/400 Telescope, National Geographic 70mm/90mm Goto Telescope etc. FEATURESInput: 100-240 V ~ 60/50HzOutput: 12 V DC 3000 mAjack plug 2.5/5.5mm SCOPE OF DELIVERYBRESSER Universal Power Supply

€59.00*
BRESSER Camera-Adapter M35/T2 for MC/MCX100/127
Camera-Adapter M35/T2 for Bresser MC/MCX-100 and MC/MCX-127 Maksutov telescopes The BRESSER Camera-Adapter M35/T2 for MC/MCX100/127 is principally designed to connect a DSLR camera (with appropriate manufacturer-specific T2 T-ring, available separately) to the Bresser MC-100 and MC-127 Maksutov telescopes which have a built-in M35 connecting thread. You can also use wider-bodied astronomical cameras (non-c-mount), which have T2 threads built into their bodies, as standard with this camera adapter. This adapter can be separated into two different lengths of 30mm and 80mm (which both truncate in a T2/M42 thread). The use of these different lengths of extension tube allows the user to vary the projection of image on to a camera chip and get the best framing for the size of object being imaged. Please note: an extra camera specific T2-adapter ring (Canon, Nikon, Sony, etc.) is necessary to connect a DSLR.  Many of these are available from us and you are welcome to contact us for advice if unsure which of these to pick.WHAT'S INCLUDED Camera-Adapter with M35x1,0mm to M42x0.75mm (T2) thread

€55.90*
Illumination Unit Polefinder EXOS-2 thread M8x0.75
Red polar viewfinder illumination unit for BRESSER EXOS-2 mounts with fixing thread M8x0.75mm. An adjustable illumination makes it easier to find the marked sky objects on the polar viewfinder.IMPORTANT NOTEPlease verify the type of fixing thread prior to your purchase. We offer two different sizes: 12mm (part No. 4964211 for older EXOS-2 mounts) and 8mm (part No. 4964212 for newer EXOS-2 mounts)FEARTURESRetrofittable red pole finder illumination for BRESSER EXOS-2Illuminates the graticule in the viewfinderMakes it easier to find the celestial objectsAlso for 4900850 BRESSER 8x50 viewfinder as spare partAlso for Explore Scientific 8x50 viewfinders as spare partSCOPE OF DELIVERYPolar Viewfinder Illumination unit for EXOS-2Fixing thread M8x0.75mm

€19.90*
BRESSER Gear-Set 1:8 Messier Hexfoc
For astrophotography it is essential to achieve the correct focus point with great precision. With the 1:8 Gear set precision focussing is easy. The gear set can be installed easily without difficulties and upgrades a 2,5" Hexafoc to a full 2,5" Hexafoc DeLuxe.Installation video:  https://www.youtube.com/watch?v=RCnsn2o-B94&t=144s

€99.00*
BRESSER Counterbalance 4,5kg for EXOS-2/EQ5
Additional counterweight to balance heavy accessories etc.

€39.90*

Customers also viewed

%
EXPLORE SCIENTIFIC MN-152 David H. Levy Comet Hunter Telescope
Maksutov Newton MN-152 David H. Levy Comet Hunter Telescope Highly corrected optic for wide-field observation and astrophotography. Developed in collaboration with the famous "comet hunter" David H. Levy. The Maksutov-Newton system does have some pros and cons respectively to the classical newtonian design. Apart from the higher price the main disadvantage is the higher weight - the thick corrector lens at the front is the cause for this. The main advantage of the Maksutov-Newton compared to the classical newton is the sharpness of the field of view. Classical newtonian telescopes do show a sharp pinpoint star image only at the middle of the field of view - outside the optical axis they have a dominant abberation, the so called coma. This is inherent in the newtonian design, and therefore valid for all newtonian telescopes of all brands and not caused by manufacturing tolerances. Coma distorts the star image - the pinpoint star shows a tail, just like a small comet. This decreases sharpness and contrast considerably. The Maksutov-Newton shows a much sharper star image - for most applications the coma is not visible. This results in a high contrast image all over the field of view - for visual observations and for astrophotography with DSLRs alike. This makes the Maksutov-Newton a ideal all-purpose telescope, that is able to show a sharp field without the need for additional correctors. SCOPE OF DELIVERY Optical Tube Carbon fiber with 2’’ focuser and reduction 10:1 Carbon dew shield with dust cap Tube rings with dovetail Explore Scientific 52° LER Eyepiece 30mm 8x50 finder scope with illumination Eyepiece Barrel diameter: 2’’ and 1.25’’ Universal 44mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5) Instruction manual SPECIFICATIONS Overall length including dew shield: 825mm Net weight including tube rings, handle, dew shield and finderscope: 7,9kg

€998.00* €1,249.00* (20.1% saved)
Vixen SXD2WL Equatorial GoTo Mount with Wifi
Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins. An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 15 kg, the axis cross of the mount weighs just 9.2 kg making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SXD2 mount in detail Precision stepper motors and micro-step motion control system At the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gears High-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweight The solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. Built-in PFL-II polar finder with illumination The built-in 5x20mm polar finder with 10° field of view has a 3-star alignment system. This eliminates the inconvenience of setting the date and original time. The illuminated reticle with variable brightness and automatic switch-off is adjustable in 8 levels and illuminated in red. The adjustment accuracy is 3 arc minutes. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller. The STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Polar finder scope: 6x20 mm, PFL-II polar finder Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweight: 1x 1.9 kg and 1x 3.7 kg Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL EQ mount Wireless unit 2 counterweights: 1.9 kg and 3.7 kg Mounting tools Pole finder PFL-II Cigarette lighter cable

€2,799.00*
BRESSER Messier EXOS 1/EQ-4 Mount
Mount and Tripod. The BRESSER Messier beginners series of telescopes. Within this series you find smaller optics mounted stable on the new BRESSER EXOS 1 mount. This combination means more value for money and puts an end to flimsy beginners scopes which discourage most of the beginners due to small, under engineered mounts. The EXOS 1 with a robust stainless steel tripod bears optical tubes weighing up to 7kg stable for visual observation. The optional motor drive for the RA axis makes usage even more comfortable, so there is no need of manual tracking and the object is kept steadily in the field of view.FEATURES Stable parallactic mount with fine drive in both axes Circular bubble level for easy horizontal alignment Stable height-adjustable stainless steel tripod Retrofittable with a tracking motor for the right ascension axis Pole height scale for setting the latitude Scaled graduated circular rings for easier finding of objects by means of star atlas or planetarium software Tripod weight: 4.7 kg Mount weight: 4 kg (without counterweight) Total weight incl. counterweight: 13.2 kg SCOPE OF DELIVERYEXOS 1 German equatorial mountstainless steel tube field tripod1 x 4.5 kg counterweight

€329.00*
%
BRESSER Computer Cable for Remote Control of MCX Goto Telescopes and EXOS-II EQ Goto Mounts
For remote control of a BRESSER MCX 102/127 Goto Telescope or a BRESSER EXOS-II EQ Goto Mount via computer cable. Navigate your telescope comfortably with navigation software and Windows 10 computer. One click on the star map on the computer and the telescope is positioned on the desired object. NOTES(This list is exemplary and not exhaustive)To control a BRESSER MCX Goto telescope, no software update of the Computer Handbox is required. A direct use is therefore possible. To control a BRESSER EXOS-II EQ Goto mount, the Computer Handbox must be updated to software version v2.3 with the help of this computer cable set. This cable set is not suitable for the EXPLORE SCIENTIFIC EXOS-2 with PMC-Eight Goto. This set does not include navigation software and computer. DOWNLOAD NAVIGATION SOFTWARE (alternatively)Sky Map Pro Demo: https://nextcloud.bresser.de/s/PnQr9gyigxp9A6zSky Map Pro ASCOM PLUG-in: http://download.ascom-standards.org/plugins/SkyMapProPlugin.zip Carte Du Ciel: https://www.ap-i.net/skychart//en/startStellarium: https://stellarium.org/de FEATURESConnects a BRESSER MCX102/127 Goto to a PC Connects a BRESSER EXOS-II Goto to a PC Comfortable control by computer USB to serial adapter included Required firmware update for EXOS-II included Compatible with WIN 10 + 11SCOPE OF DELIVERYRS-232 computer cable USB 2.0 to RS-232 adapter + driver CD-Rom Firmware v2.3 for EXOS-II Goto Handbox Flash Utility Software for Handbox Update ASCOM driver for BRESSER MCX/EXOS-II Goto Operating instructions

€42.79* €45.00* (4.91% saved)
%
Vixen VC200L Optical tube
Astrophotographers generally use two different focal lengths: Short focal lengths for overview photos and extensive deep-sky objects, and long focal lengths for objects which are further away. Our aspherical mirror optics offer the perfect solution for these scenarios. The VISAC primary mirror (Vixen Sixth-Order Aspheric Cassegrain) is specially designed for astrophotography and provides a fully flat and true-colour image over the entire image frame. Thanks to the three-element field corrector in front of the convex secondary mirror, there is no spherical aberration, coma or field curvature. Although the device is designed for astrophotography, it is also suitable for visual observations. FEATURES Photographically optimized thanks to field flattener lens Revolutionary coating technology High light-gathering power Photographically optimised optical system Built-in field flattener lens 200 mm aperture and 1800 mm focal length Optional reducer availableBackfocus without Reducer: 142,9 mmBackfocus with Reducer: 63,5 mmWeight: 6.9 kg DELIVERY CONTENT VC200 reflector telescope Carry handle 7x50 finder scope (illuminated) Flip mirror Dovetail adapter

€1,499.00* €2,299.00* (34.8% saved)
Illumination Unit Polefinder EXOS-2 thread M8x0.75
Red polar viewfinder illumination unit for BRESSER EXOS-2 mounts with fixing thread M8x0.75mm. An adjustable illumination makes it easier to find the marked sky objects on the polar viewfinder.IMPORTANT NOTEPlease verify the type of fixing thread prior to your purchase. We offer two different sizes: 12mm (part No. 4964211 for older EXOS-2 mounts) and 8mm (part No. 4964212 for newer EXOS-2 mounts)FEARTURESRetrofittable red pole finder illumination for BRESSER EXOS-2Illuminates the graticule in the viewfinderMakes it easier to find the celestial objectsAlso for 4900850 BRESSER 8x50 viewfinder as spare partAlso for Explore Scientific 8x50 viewfinders as spare partSCOPE OF DELIVERYPolar Viewfinder Illumination unit for EXOS-2Fixing thread M8x0.75mm

€19.90*
Bresser Messier AR-102xs/460 EXOS-1/EQ4
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation. Ambitious beginners and advanced observers alike will see the brightest objects outside our solar system with the MESSIER AR-102xs. Watch details in the Great Orion Nebula from the astonishing distance of 1500 lightyears (14.200.000.000.000 km)! Scanning the lunar terminator is simply a pleasure. Scanning the Milky Way in Saggitarius shows a multitude of deep-sky objects. Richfield telescope with ED glass lens and a short focal length of 460mm. Suitable for traveling and to observe large open star clusters and the milky way Mount and Tripod. The BRESSER Messier beginners series of telescopes. Within this series you find smaller optics mounted stable on the new BRESSER EXOS 1 mount. This combination means more value for money and puts an end to flimsy beginners scopes which discourage most of the beginners due to small, under engineered mounts. The EXOS 1 with a robust steel tripod bears optical tubes weighing up to 7 kg stable for visual observation. The optional motor drive for the RA axis makes usage even more comfortable, so there is no need of manual tracking and the object is kept steadily in the field of view. CHARACTERISTICS OPTIC Optical design: refractor telescopeLens diameter: 102mm / focal length: 460mm / F/4,5Maximum recommended magnification: 204xHigh-quality and light gathering achromatic objective lens Modern multi-coating of the lenses for a bright and high-contrast image Robust aluminium tube construction Very high quality Hexafoc focuser with 2.5'' free inner diameter 6x30 viewfinder with crosshair eyepiece; optimised finder mount for comfortable viewing 31.7mm (1.25'') zenith mirror Prism rail with stainless steel clamping surface (44mm universal dovetail for GP/EQ5/LXD75) 50.8 to 31.7mm adapter with integrated T2 adapter (optional T2 ring required) Telescope for night and solar observing CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Circular bubble level for easy horizontal alignment Stable height-adjustable stainless steel tripod Retrofittable with a tracking motor for the right ascension axis Pole height scale for setting the latitude Scaled graduated circular rings for easier finding of objects by means of star atlas or planetarium software Tripod weight: 4.7 kg Mount weight: 4 kg (without counterweight) Total weight incl. counterweight: 13.2 kg Scope of delivery optical tube 26mm Super Plössl eyepiece (31.7mm / 1.25") 31.7mm (1.25") zenith mirror integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamping surface (44mm universal dovetail for GP/EQ5/LXD75) 6x30 viewfinder Rotatable star chart Lens solar filter Astronomy PC software Stellarium (via download) 1 x 4.5 kg counterweight Equatorial EXOS 1 mount with stainless steel tripod

€609.00*