BRESSER Messier EXOS 2/EQ-5 Mount

The BRESSER Biolux NV comes with a wide range of accessories and is an ideal beginners' microscope. A unique feature of these models, the Barlow zoom system is inside the eyepiece tubes: With the barlow lens the magnification can be  varied by a factor of 2 in visual observation. This feature, together with 3 objectives and 2 interchangeable wide field eyepieces gives a magnification range from 20x to 1280x. With the mechanical desk you can move your sample precisely even when observing at high magnifications. For optimal illumination a variable LED for transmitted and incident light together with a filter wheel gives the ideal light for all samples. Light from above is especially imortant to observe non transparent samples like leaves, small insects and much more. This makes microscopy for beginners very easy! The power is supplied by batteries (3x AA). A dust cover, 5 prepared slides and 5 blank slides and cover slips are included for making your own samples. With the included HD camera you can observe your samples on the computer screen, and capture images and video with the included Windows software. The software is compatible with Windows 10 and 11. With this camera, you can always document your interesting observations and share them with others. FEATURESbiological microscope with HD cameraLED light for transmitted and incident lightbattery-poweredlots of accessoriesincident light for objects not higher than 4mm SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYSolid metal Microscopemechanical deskHD camera with metal housing, resolution 1280 x 7202 eyepieces: 5x and 16x3 objectives: 4x, 10x and 40x1 Barlow lens with 2x magnificationMicroscope toolsmechanical cross table5 prepared slides5 blank slidesDust cover and hard case

Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 10x60 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.0 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=0.85 degree) on the crosshair are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

Are you having trouble focusing your eyepiece or camera? Then use this 37.5 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube. SPECIFICATIONSIncreases the distance to the eyepiece/cameraSuitable for 2.5 inch HEXAFOCOptical length: 37,5 mmInternal and external thread: M68x0,75 mmInside black matt coatedMaterial: aluminium, black anodizedSCOPE OF DELIVERYExtension sleeve 37,5 mm (1 piece)

The BRESSER WiFi 1080P Digital Microscope 2L with LCD screen impresses with its excellent flexibility. The device comes with everything you need to get started: display, mouse and remote control. Additionally, the digital microscope can also be connected to external devices, such as a PC, smartphone or tablet. With HDMI and USB interfaces as well as WiFi function. Uses The BRESSER digital microscope is perfect as a workshop microscope, such as for examining material samples, circuit boards and electronic components. It’s also useful for measurements, quality control of surfaces or testing of raw materials with the large field of vision and the right magnification through the high-quality zoom lens. The measuring microscope also allows for biological examination of plants and insects in detail on the high-resolution, movable 17.8 cm (7”’) colour LCD screen. The perfect tools for the job – such as for identifying plant diseases and pests in horticulture and agriculture. The powerful lens offer amazing insights into the microcosm, including in school and amateur use. With the enclosed 100 mm extension for the tripod, you can also examine workpieces located at height, or benefit from the large field of vision up to max. 34 x 70 mm and a working distance of up to 195 mm. Illumination In order to illuminate the objects that you are examining evenly, without shadows, the reflected-light microscope has 3 light sources: 1 ring light with 6 LEDs and 2 gooseneck LED spotlights. The brightness of the lights can be easily controlled via the LED touch bar. Recording function Extensive analyses easily and efficiently: With the integrated camera, you can document your examinations in photo and video format. Using the remote control can also help to prevent camera shake. With the click of the mouse, the recordings can then be saved to a Micro SD card (up to 64 GB, not included) via the on-screen menu. No need for a PC or other external device for your work. As the zoom can be focused to infinity, the digital microscope can also be used as a webcam. If required, you can easily attach the lens, including the screen, to a standard tripod using the integrated tripod connection thread. FEATURES High-resolution, movable 17.8 cm (7”) colour LCD screen Professional image processing DSP, 3D noise reduction Integrated zoom lens Magnification on integrated screen: 2x - 44x, depending on configuration Digital zoom: 1x - 16x Reflected light illumination: LED ring light of 6 adjustable LEDs, 2 gooseneck LEDs LED touch bar for easy brightness control Supports image, video recording and playback functions Video resolution: 1080 p @ 30 fps / 720 p @ 60 fps Photo resolution: 4 MP/16 MP (interpolated) Working distance: min. 22 mm, max. 195 mm when used with the stand Supports mouse and remote control Supports HDMI, USB(UVC) and WIFI output Image-in-image function Various measurement and calibration functions Various image functions (brightness, contrast, colour modes, mirroring, etc.) Infinity focus, can be used as a webcam Supports Micro SD cards up to 64 GB PC operating system: Win 8.1/10/11 Power supply via 5 V mains adapter (USB-C) or battery operation: 1x li-Ion battery type 18650 (not included) PACKAGE CONTENTS LCD microscope Microscope stand, incl. extension Remote control Mouse Power adapter Instruction manual 2x USB cable, type C HDMI cable

Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 90mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 90mmFits to outer telescope tube diameter from 90 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this. Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted. SPECIFICATIONS Reduces the focal length by 0.7x at f/8 Flattens the field for astrophotography Developed for ED127 und ED152 APO telescopes Also fits Explore Scientific ED102 and ED165 telescopes - and others Free aperture: 65mm Inner thread for telescope adaption: M76x0.75mm Outer thread for camera adaption: M72x0.75mm 3" focuser barrel adaptor included Adaptor for Explore Scientific focuser M54x0.75mm included T2 camera adaptor M42x0.75mm included Diameter: 78.5mm; length: 100mm Length without adaptors: 52mm Weight without adaptors: 530g What's Included Reducer/Flattener 3" focuser barrel adaptor Adaptor for Focuser M54x0.75mm T2 camera adaptor M42x0.75mm Dust caps

Discover the possibilities and forge new paths with the Nebula EXOS-2 Goto Mount!Mount and TripodThe BRESSER EXOS-2 is a stable mount with a high load capacity and precise tracking for visual observations and astrophotography. Double radial groove ball bearings in both axes ensure precise, smooth motion, and the RA axis bearing has been optimized to reduce backlash. Additionally, the tripod is reinforced to further suppress vibrations. The BRESSER EXOS-2 can be loaded with up to 13 kg of optics for purely visual use depending on the length and purpose!Nebula: the powerful and flexible Goto systemWith the new Nebula Goto system, set off for new astronomical shores. This system offers several control options. You can operate the mount directly via its own Nebula control interface using your smartphone or tablet (iOS and Android supported). Alternatively, you can also use a planetarium software such as SkySafari. Manual control remains an option as well. For this, a hand box for minor corrections or simple control commands is included.Furthermore, with the BRESSER Nebula Goto Kit, you can connect your laptop or PC directly via WIFI or LAN cable (recommended for faster data transfer) to the Nebula control unit. This not only gives you full control over the mount but also allows you to connect various devices such as cameras, motor focus, filter wheels, etc. directly to the control unit via various USB ports. This eliminates the need to connect each device to your computer via cables. The pre-installed program KStars / EKOS lets you comfortably control all devices from your PC or laptop. Electronic polar alignment or guiding can also be easily achieved with the Goto Kit, provided you have a camera connected. You are also not limited to the software of the Nebula control unit. Thanks to the installed ASCOM Alpaca driver, you can use your own programs on your computer to control the mount - whether it's Stellarium or N.I.N.A. The two stepper motors with a belt drive ensure a smooth, direct drive of the two axes. It's only important to have a good balance. FEATURES EXOS-2 MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Sturdy height-adjustable stainless steel tripod (Min. 69 cm / Max. 109.5 cm) Load capacity of up to 13 kg Spirit level for easy horizontal alignment Polar height scale for setting the latitude Polar scope with optional lighting (item no. 4964212) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight including counterweight: 14.8 kg Batteries: not included FEATURES GOTO SYSTEM Belt drive for a more precise, quieter tracking Stepper motors with high resolution (0.36´/microstep) Hand control box for direct control of the mount Virtual hand control box for smartphones and tablets PC control – ASCOM compatible USB ports for cameras, motors, filter wheels etc. SCOPE OF DELIVERY BRESSER EXOS-2 Mount Polar finder scope with optional illumination Stainless steel field tripod with accessory tray 1x 4.5-kg counterweight 2 stepper motors for the axes (RA and DEC) Raspberry Pi control unitBasic handbox 230V / 12V / 3 A power adapterConnection cableManual for download

THE PMC-EIGHT GOTO SYSTEM JUST AWARDED A SKY AND TELESCOPE HOT PRODUCT FOR 2018. The Explore Scientific EXOS2-GT with PMC-8 Electronics is quite unique and special. Most of the serious amateur mounts on the market today offer single processors. The PMC-8 electronics are extremely robust. They include a 2-Channel Multi-Processor Micro-controller with 8 CPUs that run independently and are completely deterministic in their behavior, thus the name PMC-8. Within this multi-processor system is a 64 Kbyte EEPROM Non-Volatile Memory bank used to store parameters; a Wireless Ethernet 10/100 with full IP function which permits operation from anywhere using a browser, ASCOM, or APP over the web or serial port; and Non-Volatile Memory used to store user selected parameters. The electronics also includes an Auto-Guide port (ST4 contact input) and features the only wireless ASCOM driver on the market. The belt driven system uses 2 timing pulleys (1-45 groove and 1-10 groove) with fiberglass re-enforced neoprene belt connected to a Nema11 bi-polar stepper .67 amps 12ncm motor then connected to the worm. Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds. The included battery pack (12 V) takes eight size "D" batteries. The head rests on a very tough and rigid stainless steel tripod with adjustable 2" legs from 26.8" to 42.5" and can support up to 28 lbs. of equipment. This system is all controlled from a tablet, notebook or desktop pc with 7" display and WIN8.1, WIN10+11, iOS or Android 4.4 with a beautiful full graphical user interface using our very own ExploreStars OpenGoto® Software. The ExploreStars OpenGoto® Software has the same basic functions as most all other mounts on the market today. ExploreStars is a free App downloadable from the Microsoft App store and GooglePlay. The basic download includes a standard 2 star or 3 star alignment procedure, over 70,000 star database, the Messier Catalog and Solar System objects. The software interface features a Classic four-button pattern for guiding, centering, moving and slewing on the touch screen of your tablet or phone. Pull-down menus open to offer the intuitive 2 star and 3 star alignment procedure, selection of the various catalogs, guided tours, the sync button, the park position, search feature and the coordinate input screen to enter RA and DEC coordinate information. Numerical key pad allows for selectable and user enterable GOTO speeds for slewing, centering and guiding rates. You can also set sidereal, king, lunar, solar, and user defined tracking rates. What makes this software different is that YOU can write your own code and import it into this software. Create a Messier challenge. Create a selectable list of objects you want to photograph and program that information into the software. With the ability to write your own code, you can create whatever your heart desires. Share it with the community of astronomers that are using this software. In addition, this mount can be controlled by any ASCOM compliant software using the built-in wireless ASCOM driver. GPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phone.Here are most of the ASCOM software packages available for use with the Explore Scientific / Losmandy G-11 with PMC-8 mount: ACP; APT; AST / ATC & Ricerca (Omega Lab); AstroArt; AstroMB; Cartes du Ciel / Sky Chart; CCD AutoPilot; DeepSky; Deepsky Planner; DFM Engineering; Earth Centered Universe Pro; EasySky; Eye and Telescope; Project Pluto; Hallo Northern Sky; Maxim DL; MaxPoint; PinPoint Astrometric; Prism; Sequence Generator Pro; Sidereal Technology; The Sky; SkyMap Software; SkyTools 3; Star Atlas PRO; Sky Observer; StarryNight; Stellarium; Virtual Moon Atlas; and WorldWide Telescope.VIDEO REVIEW:https://youtu.be/tmNPajsd9H4 IMPORTANT NOTE: To start using ExploreStars app, download the free app and download the celestial data set that contains the astronomical catalogs, reference images, and reference text. Simply by unzipping the ExploreStars folder containing the expanded celestial data set into your Pictures directory, you will expand the native database from a thousand objects to over seventy thousand objects.SOFTWARE DOWNLOAD: https://explorescientificusa.com/pages/software-and-downloads-for-pmc-eight-systemFEATURESUnique PMC-8 Open Goto SystemBeautiful full graphical user interface using our very own ExploreStars OpenGotoWifi controlled by Tablet, Notebook or Desktop PC with 7" or larger display, and Wifi function (not included)Needed system software of optional computer or tablet: WIN8.1, WIN10/11, iOS or Android 4.4 or higherClassic four-button pattern and joystick for guiding, centering, moving and slewing on the touch screenIntuitive 2 star and 3 star alignment procedureMultiprocessor Micro Controller with 8 CPU´sMicro-Stepper Motors NEMA-11Highly accurate and silent Belt-Drive System ST-4 compatible autoguider portASCOM Driver available: YES, supports also Pulse-GuidingYOU can write your own code and import it into this softwareGPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phoneSCOPE OF DELIVERYExplore Scientific EXOS2-GT with Open GOTO PMC-8Stainless steel tripod with 2" legs and bubble levelCounter weight 2 x 4,5 kg Polefinder with illumination unitPower supply 12 volts / 2,0 ampereExploreStars Software via downloadIMPORTANT NOTE: This package doesn´t include any WINDOWS/iOS/Android Computer or Tablet.FAQ / KNOWLEDGE-BASE:  https://explorescientificusa.com/pages/explore-scientific-knowledge-base-and-faqsPMC-Eight GROUPS:  https://espmc-eight.groups.io/g/MAIN

AP-A80Mf telescope set with mount, tripod and eyepieces and Vixen AP mount with manual fine adjustmentThe A80Mf refractor is an ideal entry-level model for beginner astronomers who value high-quality optics. Thanks to Vixen’s quality controls, the 80 mm lenses are produced to an outstanding quality standard. The refractor comes with two Plössl eyepieces (6.3 mm and 20 mm) and a 90° star diagonal.The A80Mf is ideal for exploring the moon and the brighter planets.On moonless nights you can observe the Andromeda Galaxy or the Orion Nebula.The 6x24 viewfinder makes locating celestial objects quick and easy.The AP mount provides a secure, stable support for your telescope.Thanks to the slip clutch mechanism, the mount can be adjusted quickly to the target object.There is a wide range of optional accessories. The Advanced Polaris mount is perfect for both beginners and advanced observers who require a lightweight travel mount.STYLISH DESIGNThe AP mount features an ultra-smooth finish without any projecting parts.Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps!QUICK POLAR ALIGNMENTThe slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings.OPTIONAL POLAR FINDER SCOPEThe innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power.OPTIONAL STAR BOOK ONE CONTROLLERThe STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. The STAR BOOK ONE controller is designed for the AP-SM mount and is an integral part of the RA motor module.APP-TL130 tripod The compact APP-TL130 tripod is adjustable between 60 cm and 130 cm and combines the portability of a camera tripod with the strength of an astronomical telescope tripod. The tripod can be switched between rubber and metal spikes to prevent floor damage in indoor spaces.FEATURESObjective lenses: 80 mm achromat, coatedFocal length: 910 mm (f11.4)Resolution and limiting magnitude: 1.45 arc seconds; 11.3Light-gathering power: 131xTotal weight: 10.9 kgFinder scope: 6x24 mmAdapter and connections: 42 mm for T-thread; 31.7 mm connectionIncluded accessories: 31.7 mm star diagonal, PL20 & PL6.3mm eyepiecesPhotography: Prime focus and eyepiece projection DELIVERY CONTENT A80Mf refractor31.7 mm star diagonalPL20 mm and PL6.3 mm eyepiecesTube clampsDovetail holder6x24 mm finder scopeAPP-TL130 tripodAP mount1.0 kg counterweight

The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be adjusted quickly to the target object. There is a wide range of optional accessories. The ADVANCED POLARIS mount is perfect for both beginners and advanced observers who require a lightweight travel mount. STYLISH DESIGN The AP mount features an ultra-smooth finish without any projecting parts. Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps! QUICK POLAR ALIGNMENT The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings. OPTIONAL POLAR FINDER SCOPE The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power. OPTIONAL POWER SUPPLY The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions. OPTIONAL STAR BOOK ONE CONTROLLER The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. The STAR BOOK ONE controller is designed for the AP-SM mount and is an integral part of the RA motor module. NOTE The STAR BOOK ONE controller is not sold separately but is only available with the Motor Module Set! FEATURES R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth Azimuthal adjustment: Twin adjusting screws Altitude adjustment: Twin adjusting screws Number of ball bearings: 7 Polar finder: Optional Motors: Optional Tracking: Manual fine adjustment Counterweight bar: 20 mm WHAT’S INCLUDED AP mount 1.0 kg counterweight