BRESSER Messier AR152L/1200 EXOS-2 PMC-Eight GoTo Telescope Set

T-Mounts are the connecting piece between the camera adapter and the SLR camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera. Connect your BRESSER Microscope or Telescope with a Canon EOS SLR camera and take images or videos of your observed object!FEATURESConnecting piece between the camera adapter and Canon EOS SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Canon EOS

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

Finally, a universal tracking kit is available, which is easy to assemble and handle. Consisting of a telescopic sight, a tracking camera and the required prism clamp you can start long-term photography with active tracking control (autoguiding). Simply mount the prism clamp with the mounting screws on the carrying handle of the BRESSER Messier and EXPLORE-SCIENTIFIC telescopes and the AR90 / 500 guide scope with tracking camera can already be fixed stably parallel to the main telescope. The tracking camera is now connected directly to the ST-4 compatible autoguider socket of your telescope mount. Connecting the tracking camera via USB cable to your Windows computer and install the camera drivers and any Autoguider software - you can start with the astrophotography. The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 further 1/4 "photo tapped holes to allow for versatile adaptation to a variety of other telescopes and adapter plates. The tracking camera is very useful for tracking Recording of planets and even deep-sky objects. A detailed description of the tracking camera can be found at the BRESSER article number 4959050. NOTE: It is necessary to mount the camera on the telescope using the diagonal mirror so that focusing will work.NOTE: The autoguider software is not included. You can use PHD Guiding, Guidedog, Metaguide, Guidemaster (Freeware) or AstroArt, MaxIm DL (chargeable).DOWNLOAD PHD-Guiding: http://www.stark-labs.com/phdguiding.html DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html FEATURES Universal BRESSER Guiding Kit Guiding-scope, guiding-camera and dovetail clamp included For long exposure Astrophotography with autoguiding Aperture of guiding-scope: 90mm Focal length of guiding-scope: 500mm Screw set for Messier/ES handle included Fits also to many other telescopes SCOPE OF DELIVERY Guiding-scope BRESSER Messier AR90/500 (Art.Nr. 4890500) + Acc. Guiding-camera BRESSER GPCMOS02000KPA color (Art.Nr. 4959050) Dovetail-clamp for Messier/ES/GP/Vixen (Art.Nr. 4910220) Screw-set for Messier/ES handle included USB 2.0 cable (camera to computer) ST-4 cable (camera to teleskope mount) Camera driver software + ASCOM driver Professional ToupSky imaging softwareAperture solar filter for solar observing included

The telescope set, composed of Messier MC-152/2250 optics and EXOS-2 PMC-Eight GoTo mount, offers everything you need for fascinating celestial observations! Thanks to the long 2250 mm focal length, you can enjoy impressive and detailed planetary observations. The tube stands out with its compact Maksutov-Cassegrain design, ensuring optimal portability. With the 150 mm aperture, you can also observe smaller nebulae and distant galaxies in the night sky. The modern mount also impresses with easy sky navigation and precise tracking, thanks to the excellent GoTo control and the user-friendly ExploreStars app. And with the included solar filter, you can make exciting daytime discoveries on the surface of our own star! The Telescope The compact optics define the Messier MC-152. Its short length makes it ideal for mobile use. With the long 2250 mm focal length, you can look forward to exciting planetary observations at high magnifications. The 152 mm aperture allows you to observe smaller nebulae in the vastness of space. Find the remnants of a massive star explosion from 1054 in the constellation Taurus, or trace the glowing filaments of the Great Orion Nebula. Spot the famous Whirlpool Galaxy in the constellation Ursa Major, or find the Dumbbell Nebula in the constellation Vulpecula. Additionally, the high-quality objective solar filter enables safe observations of sunspots, eclipses, and planetary transits. (Caution: Never point the telescope at the sun without the solar filter!) The Mount The EXPLORE SCIENTIFIC EXOS-2 PMC-Eight GoTo mount is equipped with a modern and very precise GoTo control. It features a robust Wi-Fi controller unit that provides all necessary interfaces. The NEMA-11 stepper motors are connected directly to this unit via cable, and an ST-4 compatible autoguider port is also available. The control also supports microstepping for precise tracking. Intuitive operation via app and graphical star chart The dedicated ExploreStars app for the PMC-Eight system impresses with a visually appealing, intuitive user interface. The stars available for alignment during control initialization and all celestial objects in the database are displayed as a star chart with additional text information. All these objects can be conveniently viewed and selected. Powerful controller unit with Open GoTo for customisation The heart of the controller unit consists of a completely autonomous 2-channel multi-processor with 8 CPUs and a Wi-Fi Ethernet 10/100 adapter with IP functionality. This allows remote operation via browser, ASCOM, app, or serial connection. Open GoTo also allows custom firmware to be written and loaded onto the controller unit, enabling individual customisation of device functions and the creation of custom object lists. Polar finder included The pre-installed polar finder scope allows quick and precise polar alignment and long exposure times without unwanted star trails. The integrated LED illumination unit further enhances the usability of the polar finder. FEATURES TELESCOPE Telescope for night and solar observation High-quality BRESSER Maksutov-Cassegrain optics Aperture: 152 mm; Focal length: 2250 mm; F14.8 Ideal for planets, double stars, and planetary nebulae Excellent focuser with a 65 mm diameter Optimised finder bracket for comfortable viewing Handle for easy transport with integrated camera holder (photo thread) Smartphone camera adapter for celestial navigation included Prism rail with stainless steel clamp surface (44 mm universal dovetail for GP/EQ5/LXD75) T2 adapter for DSLR cameras (optional T2 ring required) 50.8 mm to 31.7 mm adapter with integrated T2 adapter (optional T2 ring required) With brass ring clamp FEATURES MOUNT Powerful PMC-8 Open GoTo system User-friendly and graphically appealing ExploreStars OpenGoto app Wi-Fi control via tablet, notebook or desktop PC with at least 7" display and WiFi function (not included) Compatible operating systems: WIN8.1, WIN10/11, iOS or Android 4.4 and above Classic control via directional buttons or joystick for guiding, centring, correcting, and moving via touchscreen Intuitive 2-star and 3-star alignment for GoTo control initialization Multi-processor microcontroller with 8 CPUs (processor cores) NEMA-11 micro-stepper motors High-precision and quiet belt drive ST-4 compatible autoguider port ASCOM driver available, also supports pulse-guiding Ability to create custom firmware and object lists and load them into the PMC-8 GPS compatible / settings depend on the computer or tablet used Power supply via 12-volt DC, with a maximum power consumption of 1.6 amps at full load SCOPE OF DELIVERY Optical tube with Hexafoc focuser Objective solar filter 26 mm Super Plössl eyepiece (31.7 mm / 1.25") Integrated 31.7 mm and T2 adapter Adapter for 50.8 mm (2") eyepieces Tube rings with prism rail with stainless steel clamp surface (44 mm universal dovetail for GP/EQ5/LXD75) Handle and camera holder Smartphone adapter for navigation 6x30 finder scope 90° star diagonal mirror, 31.7 mm (1.25") Astronomy PC software Stellarium (downloadable) Rotatable star map EXOS2-GT mount with Open GoTo PMC-8 Stainless steel tripod with built-in spirit level Counterweight 2 x 4.5 kg Polar finder with illumination unit 12 Volt / 2 Amp power supply ExploreStars app via software download User manual

SX2WL R200SS telescope set, complete with GoTo mount, tripod and eyepiecesThis high-quality Newtonian telescope set impresses with its large 200 mm aperture and fast focal ratio for photography. The telescope is manufactured in Japan and scores with its excellent workmanship, sharpness and contrast performance. The advantage of this telescope is its low weight and short focal length, making it ideal for larger deep-sky objects. You will be amazed when you use it to observe the surface of the moon with its craters or Saturn with its ring system. On a good night, many smaller details will be visible in the cloud bands on Jupiter, such as the large red spot on the planet. On moonless nights, you can observe the Andromeda Nebula, Orion Nebula, Eagle Nebula, Lagoon Nebula and many other interesting fainter objects. The brighter globular star clusters can be easily resolved into individual stars. The fast focal ratio of 1:4 makes this telescope perfect for photography. You can therefore get a great photo very quickly and don't have to choose endlessly long exposure times. You can optimise the image quality with the optionally available flattner Art. X000150. This flattner (not included) optimises the image right into the corners of a full-frame DSLR camera. The large 60 mm focuser also allows even heavy cameras to be attached without tilting. The sturdy metal tripod enables vibration-free mounting of the telescope and mount even in windy weather. The ultra-modern SX2WL mount is simply operated via a Wi-Fi module with your smartphone or tablet.By simply controlling the mount with your smartphone or tablet and using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning for many celestial objects. By eliminating the conventional LCD display (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography.When you touch the desired celestial object on the star chart, it is automatically pointed into the telescope's field of view and tracking begins.NOTE: An existing STAR BOOK TEN or ONE controller can also be used on this mount without any problems.Equipped with the same precision stepper motors as the top model, the AXD mount, the SX2WL brings a new standard of performance and precision to the Vixen mount family.With a photographic load capacity of 12 kg, the axis cross of the mount is just 7 kg light, making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight and the mount therefore requires fewer weights for balancing.The SX2WL mount in detailPrecision stepper motors and micro-step motion control systemAt the heart of the SX2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system scores with powerful yet very smooth drive characteristics, which are present in both fine movements and fast pans.Built-in bearingsThe bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models.High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The running surfaces of the two worms and worm wheels are manufactured to be particularly smooth, enabling very precise tracking.Declination axis as counterweightThe massive motor units are installed in the lower part of the declination axis so that the center of gravity of the SX2WL is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights.Latitude adjustmentThe latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable in +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn.The wireless module in detailThe Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app "STAR BOOK Wireless" (free of charge) you can navigate the sky without any cables. The "STAR BOOK Wireless" smartphone app transforms your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections.Reduced power consumption compared to conventional controllers with LCD monitorThe power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventionalwired controllers such as the STAR BOOK TEN.Operation similar to the STAR BOOK TEN control unitThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN control system. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo.The mount will now automatically move to this target and bring it into the telescope's field of view.All the popular features of the STAR BOOK TEN are retainedConvenient operationWhen looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently.Extensive astronomical data includedIn addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets.High-precision alignmentBy aligning the mount to one or two stars, you can already achieve fairly precise positioning of the mount. By aligning to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in the field of view of your telescope. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.Individual setting optionsAs with the STAR BOOK TEN controller, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider, variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as required.Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing.Important information: Cannot be used on old SX mounts with the old blue star bookTechnical informationCPU with 32-bit CISC processor 120 MHzThe unit is connected to the mount via a D-SUB 9PIN connector as is the STAR BOOK TEN.It has a 6-pin, 6-wire modular connector for external autoguider operation.Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n・Details of the R200SS TelescopeThe f/4-200 mm optics of the R200SS impress with a great light-gathering capacity and are equipped with a parabolic primary mirror, thus delivering extremely sharp images without chromatic aberration. A special coating (state-of-the-art technology) provides the optimal surface for the observation and photography of deep-sky objects. Vixen has developed a unique aluminium vacuum coating system that produces extremely precise mirror surfaces. This revolutionary Vixen system allows for greater precision through the controlled coating of the primary mirror. This coating is also used in the VMC200L/VC200L, in addition to the R200SS.With its large aperture and short focal length, the R200SS telescope is ideally suited for astrophotography of nebulae, star clusters, and comets. The use of an optional coma corrector (not included) enables sharp imaging right to the corners of a full-frame DSLR camera. The eyepiece drawtube is equipped with a 60-mm thread for 60-mm adapters for various applications.FEATURESTelescope R200SSVery fast 200 mm f/4 optics Focal length: 800 mmResolution and limiting magnification: 0.58; 13.3 Light gathering capacity: 816x Dimensions and weight: 232 x 700 mm; 5.3kg Adapters and connections: 31.7 mm receptacle, 60 mm connection Backfocus: 72.5 +/-5 mm Made in JapanSX2WL mountRA Gear rim: 180 teethDEC gear rim: 180 teethBearing: Carbon steel / Decl. 35 mm, RA 40 mm thicknessFine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height)Counterweight rod: 20 mm diameterAzimuth adjustment: Fine worm adjustmentPower supply: DC12 V; 0.4~1.7 AMaximum load: 12 kg, photographic, without counterweightCounterweight: 1x 1.9 kgTripod connection: 45 mm spigotDimensions: 36 cm (H) x 12 cm (W) x 36 cm (L)Weight: 7 kg, without counterweight32-bit CISC processor 120 MHzOperating system: Android 6 or higher, iOS 9.0 or higherConnection: D-SUB 9PIN plugAutoguider input ST4Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg)SCOPE OF DELIVERYSX2WL mountWireless unitCounterweight: 1.9 kg (2 pcs)Mounting toolCigarette lighter cableR200SS Newton telescope2 eyepieces: SLV20mm and SLV 5mmTube ringsDovetail mount7x50 finder scope  SXG aluminum tripod

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

An optimal set for ambitious astrophotographers: the BRESSER Messier NT203s/800 Telescope with EXOS-2 PMC-Eight GoTo Mount. With its short f/3.9 focal ratio, this 203-mm telescope with a parabolic primary mirror allows deep sky imaging with short exposure times. The large 85 mm secondary mirror ensures optimal field illumination, while the high-quality 2.5" Hexafoc focuser enables vignetting-free photography. The modern mount impresses with its precise GoTo control and easy operation via the ExploreStars app, ensuring accurate tracking and intuitive sky navigation. The Telescope The BRESSER Messier Newton Telescopes have established themselves as reliable workhorses for astrophotography in recent years. With the Messier NT203s/800 with Hexafoc, we present the latest generation of these devices. The photo-Newton with a parabolic primary mirror and a fast focal ratio of 203 mm (8") f/3.9 enables deeper exposures in the same amount of time. The large 85 mm secondary mirror guarantees optimal field illumination, and the high-quality 2.5" Hexafoc focuser ensures vignetting-free photography. The tube rings with a 44-mm universal dovetail bar and handle with camera mounting option, along with an excellent bright crosshair finder, round out this high-quality device.The focuser can also be upgraded with a 10:1 reduction gear (Art. No.: 0625720). For pinpoint star imaging, the optional HR Coma Corrector (Art. No. 0510330) can be used. This is designed for both visual and photographic use, significantly improving image quality, especially in the outer areas of the field. The Mount The EXPLORE SCIENTIFIC EXOS-2 PMC-Eight GoTo Mount is equipped with a modern and highly precise GoTo control system. It consists of a robust Wi-Fi controller unit that provides all necessary interfaces. The NEMA-11 stepper motors are directly connected to this unit via cable, and a ST-4 compatible autoguider port is also available. The control system also supports micro-step operation to ensure precise tracking. Intuitive operation via app and graphical star map The ExploreStars app, specifically developed for the PMC-Eight system, impresses with its well-designed, intuitive graphical interface. The current alignment stars for control initialization, as well as all celestial objects in the database, are displayed as a star map with additional text information. All these objects can be conveniently viewed and selected. Powerful controller unit with Open GoTo for customization At the heart of the controller unit is a fully autonomous 2-channel multi-processor with 8 CPUs and a Wi-Fi Ethernet 10/100 adapter with IP functionality. This allows remote operation via browser, ASCOM, app, or serial connection. With Open GoTo, custom firmware can also be written and loaded into the controller unit, allowing customization of device functions and the creation of custom object lists, etc. Polar finder included The included and pre-installed polar finder scope enables quick and precise polar alignment for long exposure times without unwanted star trails. The integrated LED lighting unit further enhances the user experience of the polar finder. FEATURES TELESCOPE Type: Reflector telescope Mirror diameter: 203 mm / Focal length: 800 mm / F/3.9 Maximum useful magnification: 406x Telescope for night and solar observation High-quality Hexafoc focuser with a 2.5" free inner diameter Diffraction-limited optics with parabolic primary mirror 8x50 finder with crosshair eyepiece Optimized finder bracket for comfortable viewing Handle for easy transport with integrated camera holder (tripod thread) Smartphone adapter for sky navigation included Dovetail bar with stainless steel clamping surface Connection option for SLR cameras (optional T2 ring required) 50.8 mm to 31.7 mm adapter with integrated T2 adapter (optional T2 ring required); with brass compression ring Focus point approx. 100 mm above the fully retracted focuser Large 85 mm secondary mirror Large knurled screws for adjusting primary and secondary mirrors Telescope tube weight without accessories: 8.7 kg; with accessories: 11.5 kg FEATURES MOUNT Powerful PMC-8 Open GoTo system User-friendly and graphically appealing ExploreStars OpenGoto app Wi-Fi control via tablet, laptop, or desktop PC with a minimum 7" display and Wi-Fi functionality (not included) Compatible operating systems: WIN8.1, WIN10/11, iOS, or Android 4.4 and higher Classic control via direction keys or joystick for guiding, centering, correcting, and moving via touchscreen Intuitive 2-star and 3-star alignment for GoTo system initialization Multiprocessor microcontroller with 8 CPUs Micro-stepper motors NEMA-11 Highly precise and quiet belt drive ST-4 compatible autoguider port ASCOM drivers available, also supports pulse-guiding Ability to create your own firmware and object lists and load them into the PMC-8 GPS compatible / Settings depend on the computer or tablet used Powered by 12-volt DC, with a maximum power consumption of 1.6 amps at full load SCOPE OF DELIVERY Optical tube 26 mm Super Plössl eyepiece (31.7 mm / 1.25") Integrated 31.7 mm and T2 adapter Dovetail bar with stainless steel clamping surface Adapter for 50.8 mm (2") eyepieces Rotating star map Solar filter Telescope rings with handle and camera holder 8x50 finder scope Smartphone adapter for navigation Astronomy PC software Stellarium (via download) EXOS2-GT mount with Open GoTo PMC-8 Stainless steel tripod with built-in bubble level Counterweights 2 x 4.5 kg Polar finder with lighting unit 12-volt / 2-amp power supply ExploreStars app (via software download) User manual

AXD2 GoTo mount with VMC260L telescope set The AXD2 mount comes with the new STARBOOK TEN controller and the PFL polar viewfinder, which allows you to configure the mount quickly and easily via reference stars.This telescope set has everything that you need for hobby astronomy.It includes a telescope, a mount with automatic tracking and a sturdy tripod. Featuring the STARBOOK TEN control system, the telescope locates celestial objects automatically so that you don't need to search for them manually.Even if you're not an expert, you can still give your friends an exciting tour through the night sky!The AXD2 mount in detail:Robust construction and lightweight housing with 30 kg load capacity (photographic)The A7075 superalloy, the strongest aluminium alloy, is used for the R.A. and DEC axes. The stability of the A7075 superalloy is stronger than titanium, which is known for its strength as a lightweight material. Its thickness is 38% less than titanium. Using the A7075 superalloy for the axes ensures that the AXD mount is both lightweight and stable.21 bearingsThe rotating parts of the AXD mount have a total of 21 bearings. These ensure uniform motion in order to swivel the telescope and track objects.Stepper motorsVixen uses precise stepper motors for the mount in order to ensure optimal performance. The motors are controlled via a micro-step motion control system, which eliminates the disadvantage of stepper motors with large steps. The system generates 400 impulses per second at a high speed. This results in very quiet scanning with no vibrations. The stepper motors on the AXD mount have sufficient torques. This is most significant when working at high magnifications and photographing with a CCD camera with small pixel sizes.Worm gearsThe sizes of the worm gears were increased in the latest Atlux version. The AXD mount has 270 teeth in the R.A. axis and 216 teeth in the DC axis. Both axes are 50 mm in diameter. This ensures that the mount operates with precision and stability.Low backlashThe Vixen micro-step motion control system ensures that the stepper motors run uniformly at low and high speeds. This eliminates the need for reduction gears in the motor and therefore reduces the backlash in the gears.Elegant designThe flat sides of the mount were designed based on previous generations of the New Atlux range. The white and silver housing provides a modern and elegant exterior with high functionality.The AXD is the flagship model in the Vixen mount range.Original motor layoutThe solid R.A. and DEC motor units are arranged in the lower part of the mount. This means that they automatically act as a counterweight. As a result, you require far fewer weights on the counterweight bar. On small devices, no counterweight is required. The counterweight bar can be slid fully into the housing.Polar finder scopeThe AXD mount is equipped with a 6x20 polar finder as standard. The polar finder features an integrated scale, which provides a quick and easy way to polar align the telescope in the northern hemisphere.For observations in southern latitudes, the polar finder features an image of the Octans constellation, which can be aligned with the night sky.VPEC periodic error correctionPeriodic errors on mounts are usually measured and corrected by the user. Unlike the old StarBook controller, the STAR BOOK TEN controller saves these errors permanently. The periodic error of the mount is measured in the factory and corrected before delivery. This is known as VPEC and functions automatically as soon as you use the mount.It delivers an accuracy of +/- 2.8 arc seconds. You can increase the tracking accuracy further by saving your own recorded periodic errors.The VMC 260 telescope in detailThe optics of the VMC260L are significantly better than the traditional Schmidt-Cassegrain telescope. Despite its high 3000 mm focal length, it is just 650 mm long.Featuring a large 260 mm aperture, the telescope collects large amounts of light for serious professional observations and photography of the planets and countless deep-sky objects.Thanks to the dielectric mirrors, the VMV260L guarantees razor-sharp images and maximum brightness. The open lens barrels cool the telescope quicker than conventional closed Cassegrain systems.The telescope can be used with an optional 0.62x focal reducer to reduce the aperture ratio to 1:7.1. This shortens the exposure times and allows you to photograph large objects. The telescope comes with a standard dovetail bar and a carry handle that doubles up as a camera holder for night sky photography. FEATURESAXD2 GoTo mount with VMC260L telescopeProfessional telescope kit with TR102 tripodMount with 30 kg load capacity (photographic)Modern STARBOOK TEN controller with autoguider inputMore than 270,000 pre-installed celestial objectsIlluminated polar finder with direct star alignmentProfessional Maksutov-Cassegrain with 260 mm apertureSturdy, vibration-resistant tripodTotal weight: 55.9 kgDELIVERY CONTENT VMC260L telescopeAXD-TR102 tripod 2 counterweights (1.5 kg and 7.0 kg) 7x50 finder scope Folding mirror Carry handle