BRESSER JM-34 Double Pipe Clamp 35 mm and 50 mm

Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/  Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 9 cmmax. opening: 6 cm SCOPE OF DELIVERY1x studio clamp

The universal BRESSER BR-141 smartphone holder is designed for devices with a width of 5 to 15 cm. The smartphone clamps into the adjustable holder and can be turned to the desired position. The strong and sturdy clamp on the other side allows the holder to be attached to a table, shelf or bar. The maximum load is 400 g. FEATURES Fully flexible and adjustable smartphone holder Designed for devices with a width of 5 to 15 cm 400 g maximum load Strong clamp for securing the holder to a table, shelf or bar WHAT’S INCLUDED 1x smartphone holder

Practical and compact light box with versatile applications.BRESSER's space-saving photo studio is ready to go without any additional photo studio equipment.Large portable all-in-one solution in the form of a light box, three different backgrounds, clamps for attachment and plenty of space for large products, optimally illuminated by 6 x 150 watt magnetically attachable LED strips.With a height of 160 cm, a width of 100 cm and a depth of 80 cm, the BRESSER BR-PHT160 light tent is the ideal solution for professional product photos of larger objects, whether in the field of fashion, works of art or musical instruments. Perfect illumination is ensured by a daylight temperature of 5500 K with a CRI of 95 and provides all the prerequisites for an optimal appearance in the web shop.The sides of the photo tent can be opened with a zip, for example, to insert additional light sources such as daylight lamps or studio flashes. This gives the creative photographer the possibility to use the light box even for portrait photos in a sitting positions or of children. In the Bresser range you will certainly find suitable fabric backgrounds such as (F004573) which can also be used as flatlays. The BRESSER BR-PHT160 light box can be used lying down or standing up and also serves as a softbox in itself by draping studio lamps or studio flashes inside behind the diffuser cloth.This all-rounder is quick to set up and also to take down and can be stored compactly in the bag included in the delivery or easliy taken along to on-location assignments.PROPERTIESLarge photo tent for professional product photosDimensions: 160 x 120 x 80 cm (H x W x D)Can also be used for flatlaysSide openingsLighting via 150 watt LED strips that can be flexibly attached to the frameDaylight colour temperature of 5500 KColour rendering index (CRI) of 95Energy-saving and low heat generationIncl. diffuser cloths and backgrounds ( white, black, blue)SCOPE OF DELIVERY16x Rods for frame1x  Outer cober light tent6x  LED strips3x  Power supply units with switch (2 LED strips each can be connected)8x  Corner connectors for centre pole3x  Background clips3x  Diffuser cloth for front of light tent3x  Backgrounds (white, black, blue)1x  Transport and storage bag

When there is no assistant around to hold the collapsible reflector for you during a photo shoot the BRESSER BR-6 clamp support offers the optimal solution. The metal clamp with a strong spring safely holds even larger reflectors. Thereby, the rubber lips protect the reflectors against any damages. This clamp is attached onto a tilt head, so you can position the reflector flexibly for an ideal illumination.The support clamp is equipped with a removable adapter with two different threads so it can be put onto any lightstand.FEATURESmetal clamp to attach collapsible reflectors to lightstandstilt headopening for studio umbrellasexchangeable tripod connectionSCOPE OF DELIVERYsupport clampspigot adapter (1/4" female, 3/8" female)

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 8 cmmax. opening: 6 cm SCOPE OF DELIVERY5x studio clamp

Paper backgrounds often tend to roll up at the bottom end. This BRESSER weighted bar is designed to stop the paper from moving and ensure a tight background for your photographs. Simply attach the weighted bar to the end of the paper roll with the adhesive tape provided. Small spirit levels on both sides of the bar help to ensure that the background is mounted in a level position. FEATURES 280 cm long bar for weighting paper backgrounds Prevents unwanted rolling Spirit levels on both sides to ensure level installation Collapses into 3 parts for transport and storage WHAT’S INCLUDED 3-part weighted bar Adhesive tape

While product photographers usually try to avoid light reflections, a purposeful set of sparkles can be deliberately used in articles such as watches and jewelery in order to lend the product pictures a certain shine. FEATURES spotlight with 18 LEDs ideal for effective product photos of glossy articles such as watches, jewelery, etc. fits into common versions with E27 thread SCOPE OF DELIVERY 1x spotlight E27

Universal clamp with a strong spigot adapter. The bracket can be clamped to a photo shooting table, shelf or table. Studio lamps or flashes with a tripod thread fit on the universal spigot adapter.FEATURESversatile clampstrong springreversible rubber lipsstable spigot adapter 1/4"max. opening: 6 cmsuitable for studio lights and flashesSCOPE OF DELIVERY1x Clamp with Spigot Adapter

A handy and universal metal clamp to attach background paper, background cloth or collapsible reflectors to a rod or pipe. With this clamp you can for instance prevent a background roll from unrolling.  NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESsolid metal background clamplength: ca. 15 cmopening: ca. 5,5 cmweight: 70 gSCOPE OF DELIVERY1x background clamp

A strong pipe clamp made of metal which can be screwed onto a light stand thanks to the 3/8'' female thread on the lower side of the clamp. This way a crossbar with a thikness of 25 mm to 35 mm can be put onto the light stand.FEATURESsolid metal pipe clampdiameter: 25 - 35 mm3/8'' female thread on its lower sideSCOPE OF DELIVERY1x Pipe Clamp 35mm