BRESSER HD Moon & Planetary Camera & Guider 1.25"

The BRESSER UV + IR Cut Filter makes lunar and planetary images even sharper.Digital astro cameras have a wide sensitivity range that significantly exceeds the spectrum of visible light. Thus, the wavelengths of invisible light in the ultraviolet and infrared are also captured. This leads inevitably to a small additional and of course unwanted blur. The solution is this UV + IR Cut Filter, which allows only light in the visible range 400 nm to 680 nm to pass through and blocks all other wavelengths of light. As soon as these disturbing light waves are cut off, the sharpness of the image and the contrast are increased. Suddenly, details on the surface of Jupiter, for example, can be seen that were previously only barely visible. A clear plus, which can be achieved by this filter.Suitable for BRESSER CMOS cameras and other manufacturers with female camera thread M30 x 0.75 mmAfter removing the original screw adapter with sensor protection glass, the BRESSER UV + IR Cut filter is mounted to the camera instead. This filter has a fine M30 x 0.75 mm external thread for mounting on the camera. The exchange is therefore quick and easy. On the opposite side, i.e. on the telescope side, there is a standard C-mount female thread for mounting other accessories. Note: This filter does not have a standard 1.25 inch (31.7 mm) filter thread. FEATURESBRESSER UV + IR Cut Filter for photographyWavelengths of invisible light in ultraviolet and infrared are blockedPasses only visible light in the range 400nm to 680nmLunar and planetary images become even sharperSuitable for BRESSER CMOS cameras an othersMale fine thread M30 x 0.75mm for mounting on the camera housingC-Mount internal thread for mounting further accessories Quick and easy mounting of the filterGlass filter made of fine optical glassPlane-parallel polished and multiple layer coatedFilter housing made of matt black anodized aluminumHousing outer diameter 31.7mm (1.25 inch)Diameter of free light transmission 17.0mm (1.25 inch) SCOPE OF DELIVERYUV + IR Cut Filter (1 pc)

BRESSER 40mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 40 mm Field of view: 46° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.Excellent for entering into the hobby of astronomy: 90mm aperture delivers 200 times more light than the naked eye! Observe craters, valleys and rims on the moon from nearly 400,000km away just as you would look out of the window of a spaceship! The MESSIER AR-90 does not only provide highly detailed views of the moon: Gaze at the division of the rings of saturn millions of kilometers away or explore the Great Red Spot of Jupiter, a giant tornado in Jupiter's atmosphere. Watch the seasons on Mars and find the sickle of Venus. The MESSIER AR-90 gives you images that are many times brighter than the instrument Galileo Galilei was using for his famous explorations almost 400 years ago. The new BRESSER NANO AZ telescopic mount has been developed to ensure quick and easy operation. The mount is as easy to use as a photo tripod, it is just more stable and easily carries telescopes weighing up to 4 kg. The mount can be easily swivelled by hand to the left, right, up and down, making it really easy to use and with a weight of only 3.4kg, the mount is also easy to transport. Ideal for the easy entry, as a travel mount or for quick observations. The telescopes are securely held by a clamp for 44mm prism rails, the so-called GP Level. This is an international manufacturer-independent standard, whereby all telescopes with such a GP prism rail can be installed on this mount. The sturdy and height-adjustable stainless steel tripod included in the scope of delivery is the ideal base for the BRESSER NANO AZ mount. FEATURESHigh quality achromatic lens telescope for beginner Telescope for night and solar observationRichfield refractor telescope with AZ mount and tripod Ideal for moon, planets and star clusters Fast setup and simple handlingIdeal for easy entry & travel mounting Aperture: 90mm / Focal length: 900mm Maximum recommended magnification: 180x Universal 44mm Dovetail plate with stainless steel rail (fits EXOS/LXD75/Great Polaris/EQ5)SCOPE OF DELIVERY: 90mm refractor telescope tube assemblyAzimuth NANO mount Stainless steel tripod with accessory shelf26mm Super Plössl eyepiece 31,7mm (1.25inch)Diagonal mirror 31,7mm (1.25inch) Tube clamps with universal 44mm Dovetail plate (fits LXD75/Great Polaris/EQ5)6x30 optical finderAperture solar-filterAstronomy software StellariumRotatable star map

Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 10x60 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.0 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=0.85 degree) on the crosshair are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual