BRESSER Darkfield Condenser dry (Infinity/TFM)

The New BRESSER Science Infinity is the new top of the range of the biology microscope series by BRESSER. It is based on infinitely corrected planachromatic objective lenses with superb image quality. Because of the modern design and optics the installation of accessories is very simple and one has many options. The WF 10x eyepieces offer a large visual field of 22mm and are also suitable for spectacle wearers. For protection purposes the eyepieces are rubber coated. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The bright and durable LED illumination is dimmable and also very practical for darkfield microscopy*.The Full Köhler illumination is adjustable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationplanachromatic objectives, infinity corrected (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterManualImmersion oilDust cover*only with optional accessories

Slides and cover glasses are an indispensable accessory which has also impact on the image quality. For most biological microscopes, the cover glass thickness is an important optical parameter, which is therefore included in the optical design and, if so, printed on the sleeve of every objective. You can usually see the number 0.17 which is the thickness in millimeters. For demanding applications in the laboratory, or for microphotography, using cover glasses with the desired thickness and high quality is necessary.The cover glasses included in the set are made of Boro 3.3 glass and are standardized to a thickness of 0.16-0.19mm. So they match the desired 0.17mm really good and give the best possible image quality. These Boro 3.3 cover glasses are pure white, without streaks and are pre-cleaned and ready to use. They are also especially suitable for fluorescence microscopy.The slides are made of soda lime glass, and have ground edges for safe handling. They have a matte field for writing on both sides (top and bottom). Slides and cover glasses are packed separately and in a vacuum sealed bag, containing moisture absorbent. They can be stored for a long time without loss of quality from hydrolysis and are easy to take out.

The BRESSER DIN PL Objective 60x, Infinity has a higher quality optics and thus achieves a particularly high resolution of the image. The plan correction ensures an smooth image field (no refocusing between the center and edge of the image field). Therefore especially recommended for photographic applications. This lens is infinitely corrected and specially designed for the BRESSER Science Infinity microscope. SCOPE OF DELIVERY 1 piece 60x planachromatic lens, Infinity

The BRESSER Photo Adapter 30.5 mm / C-Mount is designed to establish a connection between the 0.5x Reducing lens (Art.-No. 5914005) and the C-Mount MikroCam Adapter (Art.-No. 5942101). Thus a larger image field as well as a higher light intensity can be achieved with a MikroCam. FEATURESC-Mount Female ThreadPlug-in Mount: 23.2 mmSuitable for 30.5 mm Eyepiece Holder SCOPE OF DELIVERYPhoto Adapter 30.5 mm / C-Mount

Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

With the practical BRESSER Lens Cleaning Kit you can clean lens parts of a camera, binoculars or spotting scopes. The versatile cleaning kit has been specially put together for wet and dry cleaning and is the perfect travel companion in a practical case with carabiner.The universal set contains the necessary accessories for the care and cleaning of cameras and binoculars, but can also be used for other optical devices. The 2-in-1 lens pen included in the set, with a nylon brush at one end and a carbon coated rotating disc at the other, gently removes sensitive components on cameras and optics. With the mini air bellows, the fine nozzle tip reliably removes the finest dust, sand or fluff even in hard-to-reach areas. The cleaning fluid is also suitable for the care of all optical surfaces, camera housings, monitors, lenses and filters. The five high-quality microfibre cloths included in the scope of delivery reliably pick up dust and dirt, lint-free. Ten wet stripes for quick cleaning on the go complete the setPROPERTIESIdeal for cleaning lenses, binoculars, spotting scopes, cameras and filtersPractical for on the go and travellingEffectively removes fingerprints, grease stains, dust and dirtSuitable for wet and dry cleaningSCOPE OF DELIVERY1x Cleaning pen1x mini bellows1x Microfibre cloth1x Velvet cloth1x Cleaning fluid1x 10x cleaning cloths1x Carabiner bag

In addition to a diverse selection BRESSER Microscope also offers a wide range of accessories. The dark-field microscopy offers the bright-field microscopy is a special part. A gain is especially strong transparent preparations in contrast. The background is dark here, only the object is illuminated. The aperture is 0.85.This BRESSER Darkfield Condenser (dry) guides the light from the side to the preparation. The dark field condenser provides a strong contrast enhancement of the preparation, especially in highly transparent preparations. This condenser is compatible with the following BRESSER microscopes:Erudit DLX (5102000)Researcher Bino (5722100)Researcher Trino (5723100)TRM 301 (5760100)BioScience Trino (5750600)Science ADL 601 P (5770200)Science ADL 601 F (5770500)