Skip to main content Skip to search Skip to main navigation

BRESSER ClimaTemp Thermo-Hygrometer 6-piece Set

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product information "BRESSER ClimaTemp Thermo-Hygrometer 6-piece Set"

The ideal room climate not only has positive effects on our well-being, it is also good for our health. The two critical values which determine the room climate are temperature and relative humidity.

If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens.

On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator.

With the practical 6 piece ClimaTemp Hygro Indicator Set Thermo-/Hygrometer you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom, kitchen, office and children's rooms).

Next to the exact measured values for the room temperature (°C) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action.

FEATURES
  • Temperature display in °C
  • Air humidity
  • Symbolic room climate indicator
  • Early prevention of mould
  • Mounting type: stand, wall mount and magnet
SCOPE OF DELIVERY
  • 6x Thermo-/Hygro Station
  • 6x CR2032 batteries
  • manual
Assembly required: false
Batteries included: true
Batteries required: true
Body material: Plastic
Colour: black, grey, white
Display height (cm): 4
Display size (diagonal in cm): 4.98
Display width (cm): 3.1
Extended warranty (years): 5
Height of the largest digit on the display (cm): 1.7
Inside temperature (°C) from: 0
Inside temperature (°C) up to: 50
Material: Plastic
Measurement function: Humidity (inside), Inside temperature
Net Weight total (incl. accessories) (g): 27
Net weight (without access.) (g): 75
Number of articles: 6
Power supply 1): 3V Batteries
Power supply unit included: false
Total height (mm): 13
Total length (mm): 58
Total width (mm): 45
Typ [Batteries]: CR2032
Type of mounting: Magnet, Stand, Wall bracket
Water-repellent: false
Waterproof 8): false
Skip product gallery

Customers also bought

BRESSER ClimaTemp Thermo-Hygrometer 6-piece Set
The ideal room climate not only has positive effects on our well-being, it is also good for our health. The two critical values which determine the room climate are temperature and relative humidity.If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens. On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator. With the practical 6 piece ClimaTemp Hygro Indicator Set Thermo-/Hygrometer you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom, kitchen, office and children's rooms). Next to the exact measured values for the room temperature (°C) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action. FEATURESTemperature display in °CAir humiditySymbolic room climate indicatorEarly prevention of mouldMounting type: stand, wall mount and magnetSCOPE OF DELIVERY6x Thermo-/Hygro Station6x CR2032 batteriesmanual

Variants from €32.00*
€34.99*
KINEZLE Digital Wall Clock XXL
The large Digital Wall Clock XXL from the long-standing German brand KIENZLE impresses with its generous size and thoughtful features. The large display ensures the time is easy to read, even from a distance. Thanks to its built-in DCF signal receiver, the clock adjusts itself automatically—making seasonal time changes completely hassle-free. Keep Your Indoor Climate in Check Wondering if your room temperature and humidity are in the comfort zone? The digital clock continuously monitors both, so you can optimise your indoor environment based on accurate readings—ideal for maintaining a cozy home or productive workspace.Flexible Features Tailored to You This electronoc wall clock offers more than just the time. Use the handy alarm function to start your day on time, and place the unit wherever you need it thanks to the fold-out stand—perfect for bedside use. The day and date display can be set in 7 different languages, and you can choose between 12- or 24-hour time format to suit your preference. The large electronic wall clock adapts perfectly to your needs. Enjoy accurate time and real-time indoor climate data with the KIENZLE Digital Wall Clock XXL—combining precision and practicality in one stylish package. FEATURES Large digital wall clock Automatic time synchronisation via DCF signal 12/24-hour time format Displays indoor temperature and humidity Alarm function Date display (7 selectable languages) Includes stand and wall mounting eyelet Battery operated: 4x AA batteries (included) SCOPE OF DELIVERY Digital wall clock 4 AA batteries Instruction manual

€44.90*
BRESSER Weather Station 5-in-1 WTW
The new BRESSER Weather Station 5-in-1 combines a unique compact design with an extensive information service. The compact and multifunctional outdoor sensor requires very little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment of poles (pipe diameter of about 25-33 mm) is included. The 5-in-1 outdoor sensor reliably transfers all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station these values can be read and also stores history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated. A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol. Furthermore the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). A few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the “moonstruckers” also the different phases of the moon are shown. An alarm function with snooze mode is also integrated. FEATURES 5-in-1 outdoor multi sensor Inside temperature (°C/°F) and humidity Outside temperature (°C/°F) and humidity Wind direction and speed Graphical weather trend display (12 hours) Beaufort index (scale for the classification for wind speeds) Precipitation rate with history (day/week/month) Air pressure with history (24 hours) Heat index Dew point Radio controlled time and date setting Phases of the moon Alarm function Ice/frost warning Min/Max memory (up tp 24 hours) LED background light, amber SCOPE OF DELIVERY Base station with stand 5-in-1 Multisensor with mounting material Manual Additionally, 6 AA batteries are required (not included) PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging: Weather stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802510. Weather stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.

€129.00*
KIENZLE Thermo-Hygrometer Round
The KIENZLE Thermo-Hygrometer combines precision with functionality. This compact device displays the current temperature, humidity, time, and date, including the weekday, in a clear and organised format. Its subtle design allows it to fit effortlessly into any interior, whether at home or in the office. Temperature and Humidity Meter for a Healthy Room Climate The digital thermo-hygrometer accurately measures room temperature and records humidity levels. With these readings, you can ensure a comfortable and healthy indoor climate. During winter, use the temperature display to heat efficiently and save energy. Flexible Mounting Options Enjoy three mounting choices: hang the thermo-hygrometer on the wall, attach it to a magnetic surface using the built-in magnets, or simply place it on a surface with the stand. That way, the thermometer, hygrometer, and clock combo can be used wherever you need it most. Choose precision and understated elegance with the KIENZLE Round Thermo-Hygrometer for perfect indoor conditions. FEATURES Thermo-Hygrometer with time, date, and weekday display Temperature (°C / °F) and humidity measurement Temperature range: -9 to 50 °C Humidity range: 20% to 95% 12/24-hour display option Flexible mounting: hanging loop, magnet, or stand Battery-operated: 1x CR2032 (not included) SCOPE OF DELIVERY Thermo-hygrometer Instruction manual

€14.99*
BRESSER Meteo Temp W Weather Station with DCF Time Signal
Not sure what to wear or whether to apply sunscreen? The BRESSER Meteo Temp W weather station with DCF time signal keeps you up-to-date with the local weather conditions to help you plan ahead. Weather forecast, outdoor and indoor temperature, time and date – the extra large display shows you all relevant data in an easy-to-read format. What’s more, thanks to its stylish and sleek design, the Meteo Temp W fits perfectly in any space. Weather station with outdoor sensor The base station can be placed at a distance of up to 80 metres from the wireless outdoor sensor, and displays the outdoor temperature on the built-in screen. When you’re outdoors, you can also view the current temperature on the outdoor sensor’s built-in display. Monitor the indoor temperature Thanks to the built-in thermo sensor, the Meteo Temp W weather station also displays the precise indoor temperature to help you maintain a comfortable indoor climate in your living room or study. You can also use the temperature display to help you save energy in the winter: lowering the temperature by 1 degree reduces energy consumption by up to 6%. Weather forecast function with short-term trend indicator Sunny, (partly) cloudy, (heavy) rain or snow – the weather station uses six intuitive symbols to display the weather forecast for the next 12 to 24 hours, while the trend arrow shows you the trend for the next few minutes. Practical frost warning function for cold winter days The BRESSER weather station also keeps you informed about wintry weather conditions: a snowflake symbols appears on the display when the outdoor temperature falls below 3 °C to warn you about the potential for frosty conditions. Automatic date and time setting (DCF) The Meteo Temp W weather station features a date and time display that receives the time automatically from a DCF radio signal (CET time). You can also set the date and time manually to enable use in other time zones. View the local weather conditions, temperature, date and time with the BRESSER Meteo Temp W weather station! FEATURES BASE STATION Temperature display for indoors and outdoors Radio-controlled time and date (DCF signal) Graphical weather forecast (12-24 hours) Frost alarm (when outdoor temperature < 3 °C) Weather trend display Large and easy-to-read display - also suitable for older people Supports up to 3 thermometer outdoor sensors (includes 1x outdoor sensor) Fold-out stand and wall mount Battery status indicator for base station and wireless sensor Required batteries: 2x AAA (not included) FEATURES OUTDOOR SENSOR Measures temperature Easy-to-read LCD display Maximum range of up to 80 meters IP Protection Class: IP44 Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) PACKAGE CONTENTS Base station Wireless thermo sensor Instruction manual

€29.99*