Skip to main content Skip to search Skip to main navigation

BRESSER ClimaTemp JC LCD Weather-Clock

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product information "BRESSER ClimaTemp JC LCD Weather-Clock"

The BRESSER ClimaTemp JC LCD Weather Clock has the worldwide first "ultra wide angle" (UWA) display. The large presentation and the broad viewing angle provide for an easy reading of the shown information from almost any position in the room. 

Always have an eye on indoor and outdoor temperatures and humidity and get the weather forecast for the coming 12 to 24 hours. 

ATTENTION
The time set by the time signal is the Central European Time! To use this clock e.g. in countries like UK, Ireland or Portugal select the manual setting mode.

FEATURES
  • "Ultra Wide Angle" (UWA) Display 191 x 167mm/ 7.5” x 6.6”
  • Large time display (digits 6cm in high)
  • Radio controlled clock (self setting clock - adjusts for daylight savings time)
  • Alarm
  • Indoor & outdoor temperature 
  • Indoor & outdoor humidity
  • 12-24 hours weather forecast
  • Max. and min. temperature memory
  • Wall or desk mounted
  • Supports up to 3 remote sensors 
SCOPE OF DELIVERY
  • 1x weather clock
  • 1x outdoor sensor
  • 1x manual
Batteries included: false
Batteries required: true
Colour: black, silver, white
Display size (diagonal in cm): 25.5
Extended warranty (years): 5
Material: Plastic
Measurement function: Humidity (inside), Humidity (outside), Outside temperature
Net Weight total (incl. accessories) (g): 750
Net weight (without access.) (g): 687
Number of sensors included in the package: 1
Power supply 1): 1.5V Batteries
Sleeptimer: false
Total height (mm): 224
Total length (mm): 224
Total width (mm): 23
Transmission frequency (MHz): 433
Type [Watches]: Wall clock
Water-repellent: false
Waterproof 8): false
Skip product gallery

Accessories

BRESSER Thermo-Hygro Sensor 3CH for ClimaTrend MC/TB and most products of the ClimaTrend Series
Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.This device is compatible with weather stations with the following article numbers: 7004400 7004400CM3000 7004400GYE000 7004401 7004401CM3000 7004401GYE000 7004401HZI000 7004402 7004402CM3000 7004402GYE000 7004402HZI000 7004403 7004403CM3000 7004403GYE000 7004403HZI000 7004404 7004404CM3000 7004404GYE000 7004404HZI000 7005000 7005400 7005404 7005402 7006400 7006401 7006402 7006403 7006404 7007100 7007200 7060200FEATURESTemperature displayHumidity display3 channels settableRC frequency: 433 MHz SCOPE OF DELIVERYRemote sensor

€29.99*
Skip product gallery

Customers also bought

BRESSER ClimateTemp NBF Colour Weather Station with Radio-controlled DCF Clock
Feature-packed weather station: The BRESSER ClimateTemp NBF colour weather station with a radio-controlled DCF clock comes with a clear colour display that displays a range of important weather data, as well as the time, date and day of the week. It also shows you the indoor temperature and humidity to help you maintain a comfortable indoor climate. Get reliable weather forecasts to help you plan ahead Umbrella or sun cream? The weather station features a useful weather forecast function, which gives you a quick overview of what the weather has in store via 6 intuitive symbols. It also displays the current air pressure together with the trend for the next few minutes. Measure the temperature and humidity outside your own front door The weather station comes with an outdoor sensor, which takes precise measurements of the temperature and humidity outside your home. The sensor transmits the readings to the base station at a range of up to 80 metres, where they are displayed on the built-in screen together with the recent trend. You can also view the current readings on the sensor’s built-in display – perfect when you’re out on the terrace or balcony. Built-in heat and frost alarm The weather station also features a temperature alarm, which plays an acoustic signal when the outdoor temperature reaches your preset maximum or minimum value. And on cold winter days, the frost alarm will display a flashing symbol on the base station when the temperature is between -1 and -2.9 °C. Monitor the indoor temperature and humidity Dry and humid air can also be a problem indoors – maintaining a comfortable indoor climate is essential to our health and well-being. In addition to displaying the data from the outdoor sensor, the base station also measures the indoor temperature and humidity and indicates the comfort level via an onscreen comfort indicator. The comfort indicator can also be used for displaying the data from the outdoor sensor – for example if you want to monitor the indoor climate in other rooms using an additional thermo-hygro sensor (supports up to two additional sensors, see BRESSER accessories for compatibility). In addition, the base station also displays an alarm symbol where there is a risk of mould, and features a max./min. memory function that gives you a precise overview of the highest and lowest readings. Built-in alarm clock The BRESSER ClimateTemp NBF weather station is ideal for use in bedrooms. In addition to two alarm clocks that can be configured for different days of the week, it also features a snooze function with an adjustable snooze time, as well as a backlight with 5 different brightness settings and a night mode that can be configured to switch on and off at specific times. What’s more, the weather station sets the time automatically via a DCF signal so that you don’t have to reset the time manually when the clocks change. Monitor the weather conditions, indoor climate and more with the BRESSER ClimateTemp NBF colour weather station with a radio-controlled DCF clock! BASE STATION FEATURES Weather forecast Temperature and humidity (indoor/outdoor) Trend display Indoor climate indicator (indoor and wireless sensor) Air pressure Frost alarm (at temperatures between -1 and 2.9 °C) Mould alarm Temperature alarm for outdoor sensor Min./max. value memory Supports up to 3 thermo-hygro wireless sensors (includes 1x outdoor sensor) Radio-controlled time and date (DCF) 2 alarm clocks with adjustable snooze interval, can be configured for different days of the week (Mon–Fri, Sat–Sun, Mon–Sun) Backlight with 5 brightness settings, night mode with adjustable on/off time Power supply: Mains adapter (included) or 3x AA batteries (not included) OUTDOOR SENSOR FEATURES Wireless temperature and humidity sensor Built-in display for viewing current reading Range: up to 80 metres Can be placed on a table or wall-mounted Power supply: 2x AAA batteries (not included) PACKAGE CONTENTS Base station Thermo/hygro outdoor sensor Power adapter Instruction manual

€59.00*
%
BRESSER CO² Air Quality Monitor Smile
Endless meetings, urgent work emails, looking after the kids, cleaning the flat… during our hectic lifestyles, it's easy to forget about regular ventilation. Even though we know better: a high CO2 concentration can affect our health and wellbeing. The BRESSER CO2 air quality monitor Smile will show you when it's time to let some fresh air into your home or office. Simply have a quick look at the intuitive LCD display to keep an eye on the CO2 concentration, temperature and humidity. You don't need to worry about remembering what constitutes a critical carbon dioxide level - the intuitive graphical display with a linear scale and smiley face will show you the quality of the air in your surroundings. The measurements are precise, with high resolution and fast. Ventilation alarmThe practical carbon dioxide alarm reminds you when you need to let in some fresh air. If the default setting is different to your ideal indoor climate, you can configure your own limit up to a maximum of 5000 ppm. The alarm function can then be activated with a simple button press. If the preset limit is exceeded, the alarm will sound at a varying intensity depending on the CO2 concentration. The display will also show a flashing arrow symbol to remind you to open the windows. Humidity is also an important factor, as high humidity levels can cause mould to form. You can also set your own visual alarm for this reading so that you will know whether the air in the room is too dry or too moist. If you want to see more than just the current readings, there is also a practical memory function that displays the maximum and minimum values for the last 24 hours as well as the average values from the last 15 minutes and 8 hours for carbon dioxide concentration, temperature and humidity. The device is powered by a power adapter to enable continuous operation. The BRESSER CO2 Air quality monitor Smile - the perfect solution for busy fresh air fans! FEATURESSimultaneous display of CO2 concentration, temperature (°C / °F) and humidity Colour LCD display, clear and intuitive Graphical display of current CO2 concent Carbon dioxide alarm functions: Humidity alarm function Memory function High precision, high resolution, rapid response time Dimensions: 123 x 110 x 32 mm Powered by power adapter, long-term continuous operation possible DELIVERY CONTENTCO2 air quality monitor Power adapter Instruction manual

Variants from €44.90*
€60.00* €99.00* (39.39% saved)
BRESSER Professional Rain Gauge
For all ambitious amateur gardeners and meteorologists who are not satisfied with average values of the weather services, the digital wireless rain gauge from BRESSER offers the possibility of your own professional precipitation measurements. The BRESSER Professional rain gauge shows the detailed rain measurement values in millimetres, but also the indoor and outdoor temperature is displayed precisely. The rain gauge has a radio distance of 150m outdoors. The radio range is achieved by the 868 Megahertz radio signal. The base station can determine temperature and humidity and can also show the rain readings hourly, daily, weekly, monthly or annualy. It is equipped with a graphical histogram. FEATURES Precipitation measurement DCF radio clock reception and display Wake-up call with snooze function (Snooze) Outdoor temperature alarm (frost warning) Outdoor temperature (in °C or °F) Indoor temperature (in °C or °F) Humidity inside Bar chart SINCE-function for displaying the total precipitation from a certain point in time Lowest and highest value display Max-/Min-values storage Backlight Battery operated (Station: 2x AA; Sensor: 4x AA - not included!) SCOPE OF DELIVERY Rain gauge Base station Detachable stand Installation material Operation manual

€79.00*
Skip product gallery

Customers also viewed

BRESSER MyTime io NX radio controlled Wall Clock with Temperature and Humidity Measuring - Diameter 30 cm
The BRESSER MyTime io NX wall clock shows the time, transferred by a time signal, also the inside temperature, outside temperature as well as the relative humidity and the weather trend. The wireless outdoor sensor enables the transmission of the outside temperature up to a distance of 30 m (outdoors). The setting of the time as well as the change to the daylight saving time is done automatically via the DCF time signal (European Central Time). Additionally, the weather wall clock also permanently displays temperature and humidity. Thanks to the noiseless clockwork with sweeping second hand this clock makes no annoying sounds. The clock is not suitable for outdoors or in bathrooms. FEATURES 30 cm wall clock for indoors Radio controlled clock (self setting; automatic setting of daylight saving time) Brushed stainless steel frame Noiseless operation Inside and outside temperature Relative indoor humidity in % SCOPE OF DELIVERY 1x weather wall clock (3x AA batteries required, not included) 1x outdoor sensor (2x AAA batteries required, not included)

Variants from €27.90*
€49.99*
BRESSER Radio Weather Station ClimateTemp NDH-NEO
With the BRESSER Radio Weather Station ClimateTemp NDH-NEO, you are always well-informed about sun, rain, and more. This stylish weather station with external sensor offers all the important information at a glance: temperature and humidity inside and outside as well as a reliable graphical weather forecast ensure that you are always up-to-date meteorologically. The elegant display fits perfectly into any living or working environment. Optimal weather overview with the weather station's forecast Wake up in the morning and immediately know if you need to pack sunglasses or an umbrella? The graphical weather forecast of the radio weather station provides a precise prediction, allowing you to reliably plan your activities in advance. Additionally, with the air pressure display including history, you can always keep an eye on the weather trend. Perfect indoor climate – Your home always in balance Besides the weather, we of course also need the right indoor climate to feel comfortable. Therefore, the BRESSER radio weather station measures not only the outdoor temperature and humidity but also the values inside the house. This allows you to optimally control the indoor climate and ensure a pleasant atmosphere in your home, office, and more. Perfect for adjusting heating and ventilation habits. Strong partner for precise weather data – the external sensor The water-resistant external sensor of this weather station is a real powerhouse. Whether in the garden, on the balcony, or in the yard – the sensor always provides you with accurate data. With a range of up to 80 meters, you have complete flexibility in placement. And the integrated display allows you to read the measurement values directly on site. Weather station with useful features for your everyday life Additionally, the BRESSER radio weather station impresses with practical functions. The frost warning keeps you informed about frosty temperatures on cold days. With the Max./Min. value memory, you can track the development of temperature and humidity. The max/min value alarm notifies you when self-defined temperature values are reached – ideal for quickly responding to weather changes. Get the BRESSER Radio Weather Station ClimateTemp NDH-NEO and enjoy a useful eye-catcher with all important weather data! FEATURES OF THE BASE STATION Indoor temperature and humidity (°C/°F) Display of outdoor temperature and humidity (°C/°F) Graphical weather forecast Air pressure with graphical history Max/Min value alarm for temperature Max/Min value memory for temperature and humidity Frost warning Automatic time and date setting (DCF, manual setting possible) Integrated alarm clock with snooze function Moon phase Power supply: Power adapter (included) and 3x AAA backup battery (not included) PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting. FEATURES OF THE SENSOR Measurement of temperature and humidity Clear LCD display Range: up to 80 m IP protection class: IP44 Dimensions: 71 x 65 x 23 mm / Weight: 44 g Battery operated: 2x AAA batteries (not included) SCOPE OF DELIVERY Base station 1x radio sensor Power adapter Instruction manual

€69.00*