BRESSER Camera adapter 23.2mm / c-mount

The MikroCam MINI Full HD HDMI is a very compact HDMI camera. No PC or laptop is needed to use it, simply connect to a monitor, TV, beamer or smartboard. This makes the camera especially suited for teaching. As a plus, you can also mount the BRESSER HDMI display (item no. 5914120) directly on the camera. Connection via HDMI is easy and the camera is ready to go instantly. No software installation, PC setup etc. is necessary. The lossless data transfer ensures a good image quality and the image is lag free and with a constant high framerate of 60fps. This is especially helpful when digitizing a microscope workplace in QC or production With the included mouse, you can control the camera via 3 distinctive on screen menus (camera control, settings, measurements). To calibrate measurements, please add a calibration slide (e.g. item no. 5916720). The camera is well suited for presentations, lectures etc. because upon startup it is working directly in auto mode with no user input. The camera does not have a start button, it is working directly after power up. Menus and mouse icon are not visible if the mouse is not connected. Please note that this camera does not allow direct PC connection via USB. The USB port is for the mouse input only. FEATURES HDMI connection for monitor, beamer or smartboard C-mount adapter thread enables connection to various microscopes (independent of brand / manufacturer) With SD card slot (SD card not included) (Max. 512 GB) No PC or laptop necessary SCOPE OF DELIVERY MikroCam MINI Full HD HDMI with c-mount AC adapter (12 V / 1000 mA), EU USB mouse HDMI cable (length appr. 1.5 m)

Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

Eyepieces with micrometer scale are created for measurement of samples. For calibration a micrometer slide would be necessary (e.g. Bresser calibration slide with 1/10mm item Nr.: 5916700 and 1/100mm item Nr.: 5916710)This BRESSER WF10x 23mm Eyepiece Micrometer is compatible to the following BRESSER models:Biolux NV and similiar (885500x, 5116200, 9039xxx, 96197xx)Erudit MO, Erudit DLX (5110000, 5102000)Biorit (5101000)Researcher Bino (5722100)Researcher Trino (5723100)Analyth Bino (5730000)Science TRM 301 (5760100)BioScience Bino (5750500)BioScience Trino (5750600)Science ADL 601 P (5770200)Science ADL 601 F (5770500)Science MPO 401 (5780000)Science IVM-401 (5790000)Biolux ICD (5802000)Science MTL 201 (5807000)SCOPE OF DELIVERY1x Eyepiece Micrometer

This BRESSER WF10x 30.5mm Eyepiece Micrometer is compatible to the following BRESSER models:Biorit ICD (5802500)Researcher ICD Halogen (5803000)Researcher ICD LED/Akku (5803100)Advance ICD (5804000)Biorit ICD CS (5802520)Eyepieces with micrometer scale are created for measurement of samples. For calibration a micrometer slide would be necessary (e.g. Bresser calibration slide with 1/10mm item Nr.: 5916700 and 1/100mm item Nr.: 5916710)SCOPE OF DELIVERY1x Eyepiece Micrometer

The BRESSER BR-LP20 cleaning kit is designed for thoroughly cleaning equipment and lenses. This set contains four handy cleaning tools: Rubber blowerWith this, you can blow dust and small particles off the lens or camera without touching it. This prevents scratches or damage that can occur from direct contact. BrushA soft brush for removing more stubborn dirt that is not easily blown away. It is designed to be soft enough to avoid causing scratches. Cleaning fluidSpecial fluid for cleaning the lens without leaving streaks or residue. Although the fluid is not harmful, it is advised to avoid inhalation and contact with eyes and skin. Microfiber clothA soft cloth used in combination with the cleaning fluid to wipe the lens or camera clean. Microfiber is ideal for absorbing grease and fingerprints without scratching the surface. This set is an essential toolkit for photography enthusiasts who want to keep their equipment in top condition. Using the right cleaning tools like these helps to extend the lifespan of your equipment. SCOPE OF DELIVERY 1x Rubber blower 1x Brush 1x Bottle of cleaning fluid 1x Lint-free cloth

Slides and cover glasses are an indispensable accessory which has also impact on the image quality. For most biological microscopes, the cover glass thickness is an important optical parameter, which is therefore included in the optical design and, if so, printed on the sleeve of every objective. You can usually see the number 0.17 which is the thickness in millimeters. For demanding applications in the laboratory, or for microphotography, using cover glasses with the desired thickness and high quality is necessary.The cover glasses included in the set are made of Boro 3.3 glass and are standardized to a thickness of 0.16-0.19mm. So they match the desired 0.17mm really good and give the best possible image quality. These Boro 3.3 cover glasses are pure white, without streaks and are pre-cleaned and ready to use. They are also especially suitable for fluorescence microscopy.The slides are made of soda lime glass, and have ground edges for safe handling. They have a matte field for writing on both sides (top and bottom). Slides and cover glasses are packed separately and in a vacuum sealed bag, containing moisture absorbent. They can be stored for a long time without loss of quality from hydrolysis and are easy to take out.