BRESSER BR-145 flexible gooseneck mount for tablets and mobile phones

The universal BRESSER BR-141 smartphone holder is designed for devices with a width of 5 to 15 cm. The smartphone clamps into the adjustable holder and can be turned to the desired position. The strong and sturdy clamp on the other side allows the holder to be attached to a table, shelf or bar. The maximum load is 400 g. FEATURES Fully flexible and adjustable smartphone holder Designed for devices with a width of 5 to 15 cm 400 g maximum load Strong clamp for securing the holder to a table, shelf or bar WHAT’S INCLUDED 1x smartphone holder

Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

Well-packed and quickly shouldered - here everything finds its placeThe BRESSER BR-B98 studio bag is a perfect and handy companion for photo studio equipment with variable inner walls. The high-quality material ideally protects sensitive photo studio equipment such as lamp tripods, flash heads and studio umbrellas from dust and light moisture. Everything can be quickly stowed and shouldered in the well-padded transport bag with its large opening and parallel zip.There is enough space in the outer compartment for smaller accessories such as cables, filters or radio triggers. With the adjustable tension straps of the BRESSER BR-B98 studio bag, everything can be lashed down securely, even if the space is not fully used.FEATURES Large, spacious carry bag for studio equipment Parallel zip with large opening for easy packing and unpacking Fully padded Includes dividers (24 x 24 cm) to create separate inner compartments Additional exterior compartment for small accessories Handles and length-adjustable shoulder strap Integrated compression straps Made from water-repellent nylon WHAT’S INCLUDED1x Studio bag 3x Dividers (24 x 24 cm)

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 8 cmmax. opening: 6 cm SCOPE OF DELIVERY5x studio clamp

Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/  Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm

This set of 10 BRESSER BR-65 tighteners for cloth backgrounds attaches to background systems via a hook and loop fastener. A small clip is attached to the cloth background, which can then be tightened with the elastic band. The tighteners ensure that your background is kept tight and crease-free. The set includes a total of 10 tighteners. FEATURES 10 tighteners Attaches to background system with hook and loop fastener Small clips for holding the cloth background Cloth background is tightened via elastic band Rubber band min. 20 cm long WHAT’S INCLUDED 10x tighteners

This universal clamp can be attached to a shooting table, a shelf or a desk. Also very suitable to fix background paper and cloth.FEATURESsturdy metal clampstrong metal springremovable rubber lipswidth: 9 cmmax. opening: 6 cm SCOPE OF DELIVERY1x studio clamp

A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube. With this clamp you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESplastic background clampmovable toplength: +/- 16.5 cmopening: +/- 6.5 cm weight: 100 gSCOPE OF DELIVERY1x background clamp

A strong double metal pipe clamp. This pipe clamp can connect 2 pipes with different thicknesses to each other. They stand at an angle of 90 degrees to each other.FEATURESsturdy double pipe clampconnection of two pipes in an 90° anglesuitable for pipe diameters: 25 - 35 mm and 35 - 50 mmSCOPE OF DELIVERY1x double pipe clamp

Practical and compact light box with versatile applications.BRESSER's space-saving photo studio is ready to go without any additional photo studio equipment.Large portable all-in-one solution in the form of a light box, three different backgrounds, clamps for attachment and plenty of space for large products, optimally illuminated by 6 x 150 watt magnetically attachable LED strips.With a height of 160 cm, a width of 100 cm and a depth of 80 cm, the BRESSER BR-PHT160 light tent is the ideal solution for professional product photos of larger objects, whether in the field of fashion, works of art or musical instruments. Perfect illumination is ensured by a daylight temperature of 5500 K with a CRI of 95 and provides all the prerequisites for an optimal appearance in the web shop.The sides of the photo tent can be opened with a zip, for example, to insert additional light sources such as daylight lamps or studio flashes. This gives the creative photographer the possibility to use the light box even for portrait photos in a sitting positions or of children. In the Bresser range you will certainly find suitable fabric backgrounds such as (F004573) which can also be used as flatlays. The BRESSER BR-PHT160 light box can be used lying down or standing up and also serves as a softbox in itself by draping studio lamps or studio flashes inside behind the diffuser cloth.This all-rounder is quick to set up and also to take down and can be stored compactly in the bag included in the delivery or easliy taken along to on-location assignments.PROPERTIESLarge photo tent for professional product photosDimensions: 160 x 120 x 80 cm (H x W x D)Can also be used for flatlaysSide openingsLighting via 150 watt LED strips that can be flexibly attached to the frameDaylight colour temperature of 5500 KColour rendering index (CRI) of 95Energy-saving and low heat generationIncl. diffuser cloths and backgrounds ( white, black, blue)SCOPE OF DELIVERY16x Rods for frame1x  Outer cober light tent6x  LED strips3x  Power supply units with switch (2 LED strips each can be connected)8x  Corner connectors for centre pole3x  Background clips3x  Diffuser cloth for front of light tent3x  Backgrounds (white, black, blue)1x  Transport and storage bag

A practical, universal plastic clamp with a very strong spring to clamp background paper, background cloth or collapsible reflectors to a bar or a tube. With this clamp you can for instance prevent a background roll from unrolling. The clamps are provided with a movable top. This provides a stable fixation and uniform pressure on the object to be fastened.NOTE!These clamps are attached to the side of the background roll, the core of the roll and the crossbar of the background system (NOT onto the background roll itself)FEATURESplastic background clampmovable toplength: +/- 10 cmopening: +/- 4 cm weight: 25 gSCOPE OF DELIVERY5x background clamp

The practical BRESSER JM-46 lamp holder is suitable for both ceiling and wall mounting. A useful solution for confined spaces or small film or photo studios. The telescopic extension from 37 to 60 cm provides flexibility in lightning. The two-sided spigot connection with a 1/4" and a 3/8" thread makes it easy to attach LED panel lights, photo studio flashes, daylight lamps, monitors and also photo and video cams.PROPERTIESCeiling/ Wall lamp mountTelescopic extension from 37 to 54 cmSturdy mounting plate: 12 x 8 cm1/4" and 3/8" spigot connectionSCOPE OF DELIVERY1x BRESSER JM-46 wall arm1x Spigot adapter